Capillary preconditioning for analysis of anions using indirect UV detection in capillary zone electrophoresis

Novel approach for the synthesis of a neutral and covalently bound capillary coating for capillary electrophoresis-mass spectrometry made from highly polar and pH-persistent N-acryloylamido ethoxyethanol

Statically adsorbed or covalently coupled capillary coatings are of crucial importance in capillary electrophoresis-mass spectrometry for the separation of peptides and proteins. So far, published coating strategies and commercially available coated capillaries have a limited pH-stability so that the analysis at strongly acidic pH is limited, or harsh rinsing procedures for biological sample analysis cannot be applied. We here present a capillary coating based on Si-C linkages to N-acryloylamido ethoxyethanol (AAEE) with a new synthetic strategy including LiAlH₄ surface reaction. We optimized the coating method with emphasis on stability and reproducibility applying harsh rinsing procedures (strong acid, strong base and organic solvent), using the electroosmotic mobility and separation efficiency of tryptic peptides as performance measure. Complete synthesis is performed in less than 2 days for up to 8 capillaries in parallel of more than 16 m total length. Intra- and inter-batch reproducibility were determined regarding electroosmotic mobility, separation efficiency and migration time precision in CE-MS separations of tryptically digested bovine serum albumin. Coating stability towards rinsing with strong acid (1 mol/L HCl), organic solvent (acetonitrile) and strong base (1 mol/L NaOH) was investigated. Outstanding performance was found for single capillaries. However, inter-capillary reproducibility is discussed critically. The new coating was successfully applied for reproducible CE-MS separation of large proteins in diluted serum, medium-sized peptides and small and highly charged polyamines in fish egg extracts using a very acidic background electrolyte containing 0.75 mol/L acetic acid and 0.25 mol/L formic acid (pH 2.2).

Modification and validation of the pyromellitic acid electrolyte for the capillary electrophoretic determination of anions

For the determination of inorganic and organic anions, the pyromellitic acid (PMA) electrolyte is widely used. The pH adjustment of the self-prepared electrolyte was very challenging to satisfy the pH of specification of pH 7.8 +/- 0.1. A modification was proposed to provide a more simple electrolyte by buffering the PMA electrolyte with triethanolamine (TEA) only instead of adjusting the pH by NaOH and TEA. Thus, the proposed electrolyte consisted of 2.25 mmol l(-1) PMA, 0.75 mmol 1(-1) hexamethonium hydroxide and 12 mmol 1(-1) TEA. The performance of the PMA electrolyte buffered by TEA only was compared to a commercial available PMA and statistically validated in accordance with the methodology of Taguchi. No statistically significant difference could be found for both electrolytes assessing the performance and detection limits of hydrodynamic, stacking and electrokinetic injection with transient isotachophoretic preconcentration as well as repeatability of migration times, peak resolutions and peak symmetries.

Capillary electrophoretic separation of dicarboxylic acids in atmospheric aerosol particles

2,3-Pyrazinedicarboxylic acid (PZDA), 2,6-pyridinedicarboxylic acid (PDA) and 2,3-pyridinedicarboxylic acid (QUIN) solutions were studied as background electrolytes (BGEs) in the capillary electrophoretic analysis of dicarboxylic acids in aerosol particles with indirect UV detection. The BGEs were selected on the basis of similarity in structure with the analytes so that mobilities would be compatible. Optimised pH values for PZDA, PDA and QUIN solutions were 10.6, 11.0 and 10.2, respectively. Myristyltrimethylammonium hydroxide and myristyltrimethylammonium bromide were added to reverse the electroosmotic flow in the solutions in the direction of anode to enable fast anion detection. Separation was obtained for nine dicarboxylic acids (C2-C10) differing in the number of CH2 groups in their skeleton. The electrophoretic mobilities were determined to lie in the range 3.0 x 10(-4)-7.0 x 10(-4) cm2 V(-1) s(-1). The relative standard deviations (RSDs) for the absolute migration times of the analytes were mostly less than 0.5% (n=6) in PZDA solution. In PDA solution the within-day and day-to-day RSD values for migration were less than 1% and between 2 and 4%, respectively. Peak heights and areas mostly deviated between 1 and 15% in both PZDA and PDA solutions. Detection limits ranged between 1 and 5 mg/l. Methods were applied to the analysis of dicarboxylic acids isolated from aerosol particles.

Determination of low-molecular-mass carboxylic acids in atmospheric aerosol and vehicle emission samples by capillary electrophoresis

A method is developed for the determination of a large number of airborne and vehicle-emitted low-molecular-mass mono- and dicarboxylic acids using capillary electrophoresis with indirect UV detection. A background electrolyte (BGE) consisting of 2,6-naphthalenedicarboxylic acid and tetradecylmethylammonium bromide, adjusted to pH 6.2 with 2,2-bis(hydroxymethyl)-2,2',2"-nitrilotriethanol, is employed. Separations are robust using the buffered BGE, proper rinse steps, and constant current mode with migration time variations less than 3% RSD on a day-to-day basis, using different capillaries and performed by different analysts. Detection limits are at the tens of microg/l level using pressure injection. A comparison of the CE method with ion chromatography is also made.

Quantitative and qualitative precision improvements by effective mobility-scale data transformation in capillary electrophoresis analysis

By transforming the time-based x-axis of electropherograms in capillary zone electrophoresis (CZE) into the corresponding effective mobility-scale, we propose a simple and robust data representation for a better qualitative and quantitative capillary electrophoresis (CE) analysis. The time scale of the raw electrophoretic data (detection signal versus time) is transformed into an effective electrophoretic mobility scale (mu eff-scale) with account of the electroosmotic flow (EOF) peak or of an internal standard of known effective mobility. With the new scaling (detection signals versus effective mobility), the obtained electropherograms are more representative of the velocity-based electrophoretic separation and the comparison of complete electropherograms is directly possible. This is of importance when tracking peaks in real samples where alteration in EOF stability can occur or when comparing electrophoretic runs from different experimental setups (independence in column length and voltage). Beside the qualitative possibilities, a quantitative improvement is achieved in the mu eff-scale with significant better peak area reproducibility and equal to more precision in quantitative analysis than with the primary time-scale integration.

Direct analysis of nitrocatechol-type glucuronides in urine by capillary electrophoresis-electrospray ionisation mass spectrometry and tandem mass spectrometry

Direct, quantitative capillary electrophoresis-electrospray ionisation mass spectrometric (CE-ESI-MS) and tandem mass spectrometric (CE-ESI-MS-MS) methods are described for the quantitation of 3-O-glucuronides of E- and Z-entacapone isomers (EEG and EZG) and tolcapone (TG) in urine. 3-O-Glucuronide of nitecapone was used as internal standard. Good separation of glucuronides was achieved with 20 mM ammonium acetate as separation solution at pH 6.84. Stacking was used to increase the sensitivity of the method by introducing samples in 5 mM ammonium acetate. CE-ESI-MS and CE-ESI-MS-MS methods are linear with correlation coefficients better than 0.9983 and 0.9982, and repeatable with relative standard deviations below 9 and 14%, respectively. The limit of detection (LOD) in CE-ESI-MS at signal-to-noise ratio 3 is 100 ng/ml for EEG and EZG and 250 ng/ml for TG. The CE-ESI-MS-MS method was the more sensitive; LOD was 7 ng/ml for all compounds, without any concentration of the sample.

How to achieve higher repeatability and reproducibility in capillary electrophoresis

The influence of experimental parameters on precision of migration times and accuracy of integration has been studied. The repeatability of migration times strongly depends on the proper selection of the rinse steps between each run of a CE system. The rinse steps have to be optimized additionally with each separation system. This is especially important for systems providing an anodic electroosmotic flow. The errors introduced by the integration software were studied by transferring the same data sets to different commercial available integration softwares. A strategy for the transfer of raw data files between several softwares is described. By using systems with identical peak areas or with identical peak heights it could be shown that the newly introduced softwares can cope better with the leading or tailing peaks. The RSD of quantitation strongly depends on the signal-to-noise ratio. At S/N ratios larger than 35 no differences between the various softwares studied could be observed. At lower S/N ratios the newly released softwares are to be preferred.