Displacement chromatography of chemotactic peptides

Determination of benzethonium chloride in anthrax vaccine adsorbed by HPLC

A novel and sensitive HPLC method for the determination of benzethonium chloride (BZC) in anthrax vaccine was developed. Adjuvant Alhydrogel was removed by syringe filter after a simple sample pretreatment - acidification prior to injection. Chromatography was performed by isocratic reverse phase separation with methanol/262 mM ammonium acetate (80/20, v/v) on an endcapped C18 column with diode array detector (DAD). The method showed excellent recovery (100+/-1.5%). The results indicated that this method could accurately determine BZC at the limit of detection (LOD) of 0.5 ppm and the limit of quantitation (LOQ) of 1.5 ppm with dynamic range up to 100 ppm. The comparison of analysis between new HPLC and old titrimetric methods is also reported. The HPLC method is proven to be more accurate and precise with much less vaccine sample and human labor required.

Preparative reversed-phase liquid chromatography of peptides. Isocratic two-step elution system for high loads on analytical columns

We have developed further our novel sample displacement chromatography (SDC) methodology to carry out preparative separations on analytical equipment and 15-cm analytical columns for sample loads < or = 200 mg. Thus, a two-step isocratic SDC protocol was developed and applied to the purification of important biologically active peptides, i.e. bradykinin antagonists of 10 and 11 residues. Following sample loading in 100% aqueous solvent at a concentration of approximately 7-10 mg/ml (with sample loads varying from 67 to 200 mg) onto a small C18 column (150 x 4.6 mm I.D., made up of three 50-mm columns attached in series), we applied isocratic elution with aqueous acetonitrile at two concentrations, the first (lower concentration) to displace hydrophilic impurities off the column and the second (higher concentration) to displace pure product from the column; hydrophobic impurities remain trapped on the column. This modified SDC approach promises to allow great flexibility in purifying peptides, at high yield of pure product (> 99% purity), and encompassing a range of sample hydrophobicities as well as sample loads (< or = 200 mg) varying by as much as a factor of three.

Displacement chromatography of isomers and therapeutic compounds

Displacement chromatography was successfully used to separate a binary isomer mixture, epirubicin and doxorubicin, on Kromasil KR100-10 C18 250x4.6 mm I.D. (10 microm) column. Displacement parameters such as the types and the concentrations of displacer, the composition and the flow rate of the mobile phase were critically examined in this study. The displacer employed was 30 mg/ml benzethonium chloride. Loading of feed at lower initial organic level of mobile phase coupled with displacement at higher organic level was found to give efficient separation. A 30-mg amount of binary isomer mixture was separated on an analytical column. The purification of epirubicin from the closely related impurities present in raw product solution by displacement chromatography was also investigated. The purity of epirubicin required was greater than 99% with a recovery of 60%. The results have indicated that this process made good use of the high feed load, low solvent costs, and high resolution characteristics of displacement chromatography and offered the chromatographic engineer a powerful tool for the preparative purification of therapeutic compounds.

Separation of selected basic pharmaceuticals by reversed-phase and ion-exchange chromatography using thermally tuned tandem columns

The separation of basic pharmaceuticals is usually performed on C8 or C18 bonded silica supports. Silanolphilic interactions between basic analytes and surface silanol groups often lead to tailed peaks, poor efficiency, and irreproducible retention times. To solve these problems, many new types of silica-, zirconia-, and polymer-based columns, which provide unique selectivities, improved stability at high pH, or both, have been developed for the analysis of basic compounds. The essence of method development for the chromatographic analysis of basic compounds is to choose a system in which the band spacing can be varied dramatically, quickly, and conveniently while minimizing the tailing due to silanolphilic interactions. The thermally tuned tandem column (T3C) approach has been shown to provide an effective way to adjust stationary-phase selectivity for nonionic compounds. In this study, a tandem combination of an octadecylsilane (ODS) and a polybutadiene-coated zirconia (PBD-ZrO2) phase was used to separate nine antihistamines. Selectivity is tuned by independently adjusting the isothermal temperatures of the two columns. We found dramatic differences in the retention factors, elution sequences, and band spacing for the above set of basic drugs on the two types of columns. The T3C model has been used successfully to locate the optimal temperatures based on only four exploratory runs. The nine antihistamines were baseline separated on the tandem column combination even though they could not be separated on the individual phases. The effect of the buffer concentration on retention of the basic antihistamines was also studied. We conclude that cation-exchange interactions predominate on the PBD-ZrO2 phase, while reversed-phase interactions are more important on the ODS phase. Interestingly, an increase in column temperature causes a significant increase in the retention on the ODS column and a decrease of retention on the PBD-ZrO2 column. This can be explained by the change in the analyte's degree of ionization with temperature. The T3C combination of silica- and zirconia-based RPLC columns is demonstrated to be a powerful approach for the separation of this mixture of basic analytes.