Detection of neutral and charged mutations in alpha- and beta-human globin chains by capillary zone electrophoresis in isoelectric, acidic buffers

CE-based analysis of hemoglobin and its applications in clinical analysis

This review focuses on the developments and trends in CE including CIEF, CZE, MEKC, two-dimensional conjunction of CIEF-capillary gel electrophoresis, and MEKC-CZE on microfluidic devices coupled to different detection approaches, such as UV absorbance, LIF, MS, and chemiluminescence etc. for performing analysis of hemoglobin (Hb), also with an emphasis on its applications in clinical analysis. Analysis of human Hb is of important clinical sense for numerous hemoglobinopathies associated with the congenital defects and abnormal contents of Hb. The diversiform modes render CE a comprehensive primary clinical tool for Hb analysis, which is rapid, sensitive, high-resolution, and not labor-intensive.

Simplified hemoglobin chain detection by capillary electrophoresis

Hemoglobin (Hb) chains have been analyzed traditionally by cellulose acetate electrophoresis after sample extraction with acetone and denaturation with concentrated urea in order to detect thalassemia (Thal). A few capillary electrophoresis (CE) methods have been also described for separation of Hb chains also after sample extraction. We describe a CE method for analysis of Hb chains without sample preparation. Red blood cells were diluted (hemolyzed) in water and injected directly onto the capillary. The separation was performed in concentrated phosphate buffer at pH 12.6 and 2.15. Under these conditions of pH and buffer concentration, the chains were denatured and separated from the heme during electrophoresis. The common variants of the beta-chains, such as beta(S), beta(C), and beta(E), are also separated from each other. The intact Hb molecule is analyzed using the same sample and CE conditions but in an arginine-Tris buffer, pH 8.6. The data from the three separations are used to complement each other for interpretation of the presence of Hb variants and for thalassemia. The main advantages of this method are simplicity and speed. This method illustrates the flexibility and simplicity of the CE for analysis of the hemoglobinopathies.

Capillary electrophoresis and its application in the clinical laboratory

Over the past 10 years, capillary electrophoresis (CE) is an analytical tool that has shown great promise in replacing many conventional clinical laboratory methods, especially electrophoresis and high performance liquid chromatography (HPLC). The main attraction of CE was that it was fast, used small amounts of sample and reagents, and was extremely versatile, being able to separate large and small analytes, both neutral and charged. Because of this versatility, numerous methods for clinically relevant analytes have been developed. However, with the exception of the molecular diagnostic and forensic laboratories CE has not had a major impact. A possible reason is that CE is still perceived as requiring above-average technical expertise, precluding its use in a laboratory workforce that is less technically adept. With the introduction of multicapillary instruments that are more automated, less technique-dependent, in addition to the availability of commercial and cost effective test kit methods, CE may yet be accepted as a instrument routinely used in the clinical laboratories. Thus, this review will focus on the areas where CE shows the most potential to have the greatest impact on the clinical laboratory. These include analysis of proteins found in serum, urine, CSF and body fluids, immunosubstraction electrophoresis, hemoglobin variants, lipoproteins, carbohydrate-deficient transferrin (CDT), forensic and therapeutic drug screening, and molecular diagnostics.

Advances ofcapillary electrophoresis in clinical and forensic analysis (1999-2000)

In this paper, capillary electrophoresis in clinical and forensic analysis is reviewed on the basis of the literature of 1999, 2000 and the first papers in 2001. An overview of progress relevant examples for each major field of application, namely (i) analysis of drug seizures, explosives residues, gunshot residues and inks, (ii) monitoring of drugs, endogenous small molecules and ions in biofluids and tissues, (iii) general screening for serum proteins and analysis of specific proteins (carbohydrate deficient transferrin, alpha1-antitrypsin, lipoproteins and hemoglobins) in biological fluids, and (iv) analysis of nucleic acids and oligonucleotides in biological samples, including oligonucleotide therapeutics, are presented.

Capillary electrophoresis of proteins 1999-2001

This review article with 223 references describes recent developments in capillary electrophoresis (CE) of proteins and covers papers published during last two years, from the previous review (V. Dolnik, Electrophoresis 1999, 20, 3106-3115) through Spring 2001. It describes the topics related to CE of proteins including modeling of the electrophoretic properties of proteins, sample pretreatment, wall coatings, improving selectivity, detection, special electrophoretic techniques, and applications.

Capillary electrophoretic analysis of proteins and peptides of biomedical and pharmacological interest

Capillary electrophoresis (CE) is an automated approach to electrokinetic separations that has had a deep impact in all fields of life sciences, including biomedical and biotechnological research and clinical and forensic practice. The present review highlights aspects of peptides and proteins separations, with particular emphasis on macromolecular analytes of biomedical interest. Among the various CE techniques available, a novel methodology is here illustrated consisting in separations in acidic, isoelectric buffers, which have the advantage of protonating the silica wall, thus minimizing interactions of proteinaceous material with the siliceous surface, while allowing delivery of high voltage gradients, due to their low conductivities. The review ends with applications of CE to the analysis of folding/unfolding/refolding/misfolding of proteins, a field which has deep implications in the biomedical arena, since it is connected to a host of disorders, such as prion protein diseases.

The state of the art of dynamic coatings

The present review highlights the mechanisms of action and efficiency of three major classes of dynamic coatings so far adopted in capillary electrophoresis: (i) amines to oligo-amines, (ii) neutral synthetic and natural polymers, and (iii) neutral and zwitter-ionic surfactants. Their merits and efficacy have been explored in depth via a novel quantitation technique consisting of eluting, by frontal analysis, any adsorbed proteinaceous material, which can then be correctly quantified as a peak as it moves in front of the detector window. This is achieved by loading sodium dodecyl sulfate (SDS) micelles onto the cathodic side and migrating them electrophoretically into the capillary lumen, where they efficiently sweep any adsorbed polypeptide material. It is found that a common trend, for all quenchers, is linked to a hydrophobicity scale: the more hydrophobic the inhibitor, the better it minimizes potential interactions of macromolecules with the wall. This seems to be true for all the classes of dynamic modifiers tested. Finally, we describe a novel, dynamic to static quencher: it is a quaternary piperazine, bearing a reactive iodine atom at the end of a butyl tail (N(methyl-N-omega-iodo-butyl),N'-methyl piperazine). This molecule first binds to the wall, at alkaline pH values, via ionic and hydrogen bonds. Once docked onto the wall, the reactive tail forms a covalent link with the silica surface, to which it then remains permanently affixed.

Capillary electrophoresis of peptides and proteins in isoelectric buffers: an update

Capillary electrophoresis in acidic, isoelectric buffers is a novel methodology allowing fast protein and peptide analysis in uncoated capillaries. Due to the low pH adopted and to the use of dynamic coating with cellulose derivatives, silanol ionization is essentially suppressed and little interaction of macromolecules with the untreated wall occurs. In addition, due to the low conductivity of quasi-stationary, isoelectric buffers, high-voltage gradients can be applied (up to 800 V/cm) permitting fast peptide analysis with a high resolving power due to minimal diffusional peak spreading. Four such buffers are here described: cysteic acid (Cys-A, pI 1.85), iminodiacetic acid (IDA, pI 2.23), aspartic acid (Asp, pI 2.77) and glutamic acid (Glu, pI 3.22). A number of applications are reported, ranging from food analysis to the study of folding/unfolding transitions of proteins.

Quantitation of protein binding to the capillary wall in acidic, isoelectric buffers and means for minimizing the phenomenon

Notwithstanding the use of acidic, amphoteric, isoelectric buffers with isoelectric points (pI) in the pH 2-3 range, adsorption of proteins to the naked silica wall can be non-negligible. Two such buffers have been tested: iminodiacetic acid (IDA; pI 2.23, apparent pH 3.2 in 7 M urea) and aspartic acid (pI 2.77, apparent pH 3.7 in 7 M urea). Three potential quenchers of such interactions have been tested: hydroxyethylcellulose (HEC; number average molecular mass, Mr 27,000), TEPA (tetraethylenepentamine) and a novel, quatemarized piperazine [N(methyl-N-omega-iodobutyl)-N'-methylpiperazine] (Q-Pip), either alone or in binary and ternary mixtures. Human alpha- and beta-globin chains have been used as test proteins in capillary electrophoresis separations. It has been found that mixtures of these compounds are the worst possible remedy. E.g., a ternary mixture comprising 0.5% HEC, 0.5 mM TEPA and 1 mM Q-Pip still leaves behind 4.5% adsorbed protein onto the silica surface in runs in IDA buffer and 7 M urea (pH 3.2). Conversely, 0.5 mM TEPA or 1 mM Q-Pip, when used alone, minimize adsorption down to only 1.8% and 0.5%, respectively. When the same globin chain separations are performed in Asp and 7 M urea (pH 3.7), the situation is much worse: 44% protein is adsorbed in a ternary mixture of 0.5% HEC, 1 mM Q-Pip and 0.5 mM TEPA. However, when used alone, 0.5 mM TEPA and 1 mM Q-Pip reduce globin adsorption to levels of 8% and 5%, respectively. TEPA and Q-Pip are found to be in all cases the best quenchers of protein interaction to naked fused-silica; in addition they exhibit the unique property of smoothing the base-line and giving reproducible runs. The best method for desorbing bound protein was found to be an electrophoretic step consisting in driving sodium dodecylsulphate micelles from the cathodic reservoir.

Capillary electrophoresis coupled to biosensor detection

The present review highlights some modern aspects of biosensor revelation, a detection method which has already found a large number of applications in healthcare, food industry and environmental analysis. First, the concept of bio-recognition, which is at the heart of biosensor technology, is discussed, with emphasis on host-guest-like recognition mechanisms. This detection device has been successfully coupled, in its first applications, to chromatographic columns, which allow a high resolution of complex mixtures of analytes prior to interaction with the biosensing unit. The properties of the transducing elements, which should generate a signal (e.g., electrochemical, thermal, acoustic, optical) of proper intensity and of relative fast rise, are additionally evaluated and discussed. The review then focuses on potential applications of biosensing units in capillary electrophoresis (CE) devices. CE appears to be an excellent separation methodology to be coupled to biosensor detection, since it is based on miniaturized electrophoretic chambers, fast analysis times, complete automation in sample handling and data treatment and requires extremely small sample volumes. Although only a few applications of CE-based biosensors have been described up to the present, it is anticipated that this hyphenated technique could have a considerable expansion in the coming years.

Protein adsorption to the bare silica wall in capillary electrophoresis quantitative study on the chemical composition of the background electrolyte for minimising the phenomenon

A novel method is reported for quantifying protein adsorption to naked silica tubings and for assessing the efficacy of amino quenchers added to the background electrolyte. It consists of flushing a fluorescently-labelled protein (myoglobin) into a capillary equilibrated in Tris-acetate buffer, pH 5.0, until full saturation of the potential adsorbing sites. Desorption is then affected by driving electrophoretically sodium dodecyl sulphate (SDS) micelles into the capillary from the cathodic reservoir: the peak of eluted material is quantified fluorometrically by using a dual laser beam instrument able to read the fluorescein-isothiocyanate-labelled myoglobin at 520 nm and the internal standard (sulphorodamine) at 630 nm. As potential quenchers, a series of monoamines have been investigated (triethylamine, triethanolamine, ethylamine), followed by diamines (putrescine, cadaverine and hexamethonium bromide) and finally by oligoamines [spermidine, spermine and TEPA (tetraethylenepentamine), i.e., a tri- a tetra- and a pentamine, respectively]. Two values of molarities have been derived: a value at 50% (a kind of a dissociation constant) and a value at 90% inhibition of binding of macromolecules to the silica surface. According to these figures of merit, mono- and diamines are rather poor quenchers of interaction with the wall, since the 50% values are of the order of 50-100 mM and the 90% values reach as high as 560 mM. On the contrary, oligoamines, especially spermine and TEPA, are most effective, since the 50% molarities are in the sub-millimolar range and the 90% values are of the order of ca. 1 mM. Figures of merit have also been derived for different washing procedures. Those most commonly adopted in routine practice, i.e., of washing with either 1 M NaOH or with 1 M HCl, or with both, leave behind traces of proteins still bound to the wall, whereas the SDS micelle electrophoretic desorption seems to be 100% effective.