Determination of tributyltin and triphenyltin in sediments by liquid chromatography with fluorimetric detection

Maritime pollutants in shipping and commercial European ports based on relevant physical and biogeochemical environmental parameters (IUPAC Technical Report)

Ports are closed or semi-closed coastal systems with limited water circulation, poor flushing and weak tidal exchange. They are characterized as pollution hotspots or areas of stagnation with a variety of maritime pollutants. Nowadays, shipping and port managers aim to address environmental risk in their operations, striving to achieve suitable environmental management systems and environmental policies. In that way, environmental impacts are thoroughly considered, actions to minimize and prevent these effects are identified while human activities for prevention, reduction and mitigation of harmful consequences are managed. The current project provides details of quality and performance indicators, based on physical and biogeochemical environmental parameters required to monitor and audit the effectiveness of environmental management system and environmental policy applied in ports. These indicators will be used as powerful tools strengthening sound decisions when developing, shaping and evaluating national and local environmental management systems and policies. The selected indicators are described and their monitoring processes are presented and discussed. Examples of selected best environmental practice from various port authorities are included.

Tributyltin distribution and producing androgenic activity in water, sediment, and fish muscle

This study investigated the concentrations of Tributyltin (TBT) in water, sediment, and fish muscle samples taken from Kaohsiung Harbor and Kaoping River estuary, Taiwan. TBT concentrations in water and sediment samples ranged from less than 18.5 to 34.1 ng Sn L(-1) and from 2.44 to 29.7 ng Sn g(-1) weight per weight (w/w), respectively. Concentrations in the TBT-contaminated fish muscle samples ranged from 10.8 to 79.6 ng Sn g(-1) w/w. The TBT concentrations in fish muscle were higher than those in water and sediment samples. The fish muscle/water TBT bioconcentration factor (BCF) ranged from 590 to 3363 L kg(-1). Additionally, the water samples were assessed for androgenic activity with an MCF7-AR1 human breast cancer cell line. The androgenic activity ranged from 0.94 to 3.1 ng-dihydrotestosterone per litre water (ng-DHT L(-1)). Higher concentrations of TBT in water and sediment samples occurred in the dry season, but the androgenic activity had higher values in the rainy season.

Determination of organotin compounds in water by headspace solid phase microextraction with gas chromatography–mass spectrometry

This investigation evaluates headspace solid-phase microextraction (HS-SPME) coupled with gas chromatography-mass spectrometry (GC-MS) to determine trace levels of organotins in water. The organotins were derivatized in situ with sodium tetraethylborate and adsorbed on a poly(dimethysiloxane) (PDMS)-coated fused silica fiber. The SPME experimental procedures to extract organotins in water were at pH 5, with extraction and derivatization simultaneously at 45 degrees C for 30 min in a 2% sodium tetraethylborate solution and a sample solution volume in the ratio of 1:1, and desorption in the splitless injection port of the GC at 260 degrees C for 2 min. Detection limits are determined to be in the low ng/L range. According to the analysis, the linearity range is from 10 to 10,000 ng/L with R.S.D. values below 12% except triphenyltin (24%). The proposed method was tested by analyzing surface seawater from the harbors on the Taiwanese coast for organotins residues. Some organotins studied were detected in the analyzed samples. Results of this study demonstrate the adequacy of the headspace SPME-GC-MS method for analyzing organotins in sea water samples.

Determination of triorganotin species in water samples by liquid chromatography-electrospray-mass spectrometry

Liquid chromatography coupled to electrospray-mass spectrometry (LC-ES-MS) with positive ion detection was evaluated for the determination of tributyltin and triphenyltin in water samples using tripropyltin as internal standard. The separation was performed in the isocratic mode on a silica-based C18 column with a mobile phase containing 0.02% trifluoroacetic acid in acetonitrile-water (50:50, v/v). The optimum LC-ES-MS conditions were established and quantification was performed on the basis of the [M]+ ions. Limits of detection for standard solutions were 100 and 200 pg Sn injected for triphenyltin and tributyltin, respectively, and good reproducibility was observed. Solid-phase extraction was carried out on C18 cartridges to preconcentrate the analytes from natural water samples, with recoveries ranging from 80 to 110%. Limits of detection for SPE-LC-ES-MS were in the range of low ng l(-1), which demonstrates the suitability of the method for environmental samples.

Simultaneous determination of mono-, di-, and tributyltin in sediments by isotope dilution analysis using gas chromatography--ICPMS

A mixed spike containing 119Sn-enriched monobutyltin (MBT), dibutyltin (DBT), and tributyltin (TBT) was prepared by direct butylation of 119Sn-enriched tin metal using a 1:3 molar excess of butyl chloride with iodide and triethylamine as catalysts. The isotopic composition of the different tin species in the spike solution was determined by gas chromatography- ICPMS after aqueous ethylation using sodium tetraethylborate. Reverse isotope dilution analysis was used for the characterization of the spike by means of natural MBT, DBT, and TBT standards. No species transformation was evident during derivatization from the reverse isotope dilution experiments based on the measured isotope ratios both before and after spiking. The mixed spike was applied to the simultaneous analysis of MBT, DBT, and TBT in certified reference materials, PACS-2 and CRM 646, with satisfactory results.

Speciation of butyl- and phenyltin compounds in sediments using pressurized liquid extraction and liquid chromatography-inductively coupled plasma mass spectrometry

A liquid chromatographic method with inductively coupled plasma mass spectrometry is proposed for the speciation of butyl- (monobutyltin, dibutyltin, tributyltin) and phenyl- (monophenyltin, diphenyltin, triphenyltin) tin compounds in sediments. After evaluation of different additives in the mobile phase, the use of 0.075% (w/v) of tropolone and 0.1% (v/v) of triethylamine in a mobile phase of methanol-acetic acid-water (72.5:6:21.5) allowed the best chromatographic separation of the six compounds. Pressurized liquid extraction (PLE) with a methanolic mixture of 0.5 M acetic acid and 0.2% (w/v) of tropolone was suitable for the quantitative extraction of butyl- and phenyltin compounds with recovery values ranging from 72 to 102%. This analytical approach was compared to conventional solvent extraction methods making use of acids and/or organic solvent of medium polarity. The main advantages of PLE over conventional solvent extraction are: (i) the possibility to extract quantitatively DPhT and MPhT from sediments, which could not be done by a solvent extraction approach; (ii) to preserve the structural integrity of the organotin compounds; (iii) to reduce the extraction time from several hours in case of solvent extraction techniques to just 30 min. For spiked sediments, limits of detection ranged from 0.7 to 2 ng/g of tin according to the compound. The relative standard deviations were found to be between 8 and 15%. The developed analytical procedure was validated using a reference material and was applied to various environmental samples.

Determination of butyltin and phenyltin species by reversed-phase liquid chromatography and fluorimetric detection

Chromatographic separation of monobutyltin (MBT), monophenyltin (MPhT), dibutyltin (DBT), diphenyltin (DPhT), tributyltin (TBT) and triphenyltin (TPhT) was studied using end-capped reversed-phases (RP) and methanol-acetic acid-water or acetronitrile-acetic acid-water mixtures as mobile phases. Several RP columns were evaluated, and the effect of acetic acid, oxalic acid, triethylamine, and organic modifier on peak shape and retention was examined. A method based on gradient elution RPLC and fluorimetric detection is proposed for the determination of DBT, DPhT, TBT and TPhT. The sensitivity of the method makes it suitable for environmental analysis.