Determination of trace anions in organic solvents

Novel ion chromatographic stationary phases for the analysis of complex matrices

Ion chromatography (IC) has a proven track record in the determination of inorganic and organic anions and cations in complex matrices. Recently, application of IC to the separation and determination of bio-molecules such as amino acids, carbohydrates, nucleotides, proteins and peptides has also received much attention. The key to the determination of all of the above species in the most analytically challenging complex matrices is the ability to manipulate selectivity through control of stationary phase chemistry, mobile phase chemistry and the choice of detection method. This Tutorial Review summarises some of the most significant recent advances made in IC stationary phase technology. In particular, the review details stationary phases specifically designed for ion analysis in complex sample matrices, and considers in which direction future stationary phase development might proceed.

Determination of trace anions in high-nitrate matrices by ion chromatography

An ion chromatography method was developed to determine trace anionic contamination in matrices that have a high concentration of nitrate ion. Contaminant anions of interest were separated on an IonPac AS15 high-capacity anion-exchange column and detected by suppressed conductivity detection. An EG40 eluent generator was used to prepare high-purity and carbonate-free potassium hydroxide. Using the EG40, performance at trace levels was enhanced because background conductivity decreased and retention time reproducibility improved. Trace anionic contamination from the mobile phase was minimized when using the eluent generator compared to using conventionally prepared sodium hydroxide eluents. The signal-to-noise ratio was also improved with the use of a temperature controlled conductivity cell and chromatography hardware in the microbore (2-mm) format. The eluent concentration was optimized to separate the contaminant anions from the excess of the nitrate matrix ions. The procedure was demonstrated for a solution of reagent-grade sodium nitrate and high-purity 0.7% nitric acid. Method detection limits for chloride, sulfate and phosphate of 150 microg/l and lower were achieved.