Enantiomeric separation by capillary electrophoresis with an electroosmotic flow-controlled capillary

Polyelectrolyte Multilayers in Capillary Electrophoresis

Capillary electrophoresis (CE) has been proven to be a performant analytical method to analyze both small and macro molecules. Indeed, it is capable of separating compounds of the same nature according to differences in their charge to size ratios, particularly proteins, monoclonal antibodies and peptides. However, one of the major obstacles to reach high separation efficiency remains the adsorption of solutes on the capillary wall. Among the different coating approaches used to control and minimize solute adsorption, polyelectrolyte multilayers can be applied to CE as a versatile approach. These coatings are made up of alternating layers of polycations and polyanions, and may be used in acidic, neutral or basic conditions depending on the solutes to be analyzed. This Review provides an overview of Successive Multiple Ionic-polymer Layer (SMIL) coatings used in CE, looking at how different parameters induce variations on the electro-osmotic flow (EOF), separation efficiency and coating stability, as well as their promising applications in the biopharmaceutical field.

Polymer Entrapment in Polymerized Silicate for Preparing Highly Stable Capillary Coatings for CE and CE−MS

An easy-to-implement capillary coating strategy based on polymer entrapment in the network of polymerized silicate is described. In this manner, cationic polymers are tightly fixed onto the inner wall of the capillary for electroosmotic flow control without necessitating complex surface modification chemistries. The resulting coated capillary exhibited good stability over a wide range of pH, good reproducibility, strong endurance in more than 300 electrophoretic runs, and tolerance of commonly employed organic solvent additives in CE. Applications in CE-MS analysis of biologically important anions as well as sample enrichment are shown. Additionally, it was used as a durable base for attachment of multiple layers of charged polymers on the wall, via electrostatic interaction with the preceding layer. Thus, two novel types of highly stable coated capillaries, one with anodic EOF and the other cathodic, were developed.

Enantioseparations by using capillary electrophoretic techniques. The story of 20 and a few more years

This paper provides the author's insight on the past, present and future of performing enantioseparations using capillary electrophoretic (CE) techniques. These techniques are discussed from the historical point of view, as well as based on their potential as the separation techniques of today and the future. The overview covers mechanistic as well as practical aspects of CE techniques.

Penicillin G acylase as chiral selector in CE using a pullulan-coated capillary

In the present study, penicillin G acylase (PGA), an enzyme belonging to the family of hydrolases, has been investigated as chiral selector in CE using the partial filling technique. Owing to the strong disposition of PGA to be adsorbed by the inner capillary wall, permanently coated capillaries were used to diminish both the protein-wall interactions and the EOF. In particular, the silica surface of the capillary was chemically coated by an antiadhesive and an hydrophilic layer of pullulan, a high-molecular-mass homopolysaccharide. The coating procedure consisted in the silanization with glycidoxypropyltrimethoxysilane and the subsequent coupling of the hydroxyl groups of pullulan onto the silanized capillary. Using this approach, a significant EOF suppression was obtained within a wide pH range (pH 3.0-9.0); this result was very important in order to find the suitable conditions for the application of partial filling technique. The optimization of partial filling was carried out by considering the effects of different experimental conditions (buffer pH, PGA concentration, and loading duration), on the migration time and enantioresolution of rac-ketoprofen. Under the selected conditions as: 100 mM sodium phosphate buffer (pH 5.5) containing 240 microM of PGA (partial filling of 120 s at a pressure of 50 mbar), a series of acidic compounds resulted to be enantioresolved in about 10 min. The long-term stability of the proposed coating was evaluated; more than 100 injections were performed without significant loss of reproducibility.

Electrophoretic analysis of proteins and enantiomers using capillaries modified by a successive multiple ionic-polymer layer (SMIL) coating technique

The applicability of three-layer coatings consisting of three different polymers (A(+)-B(-)-C(+) coating) prepared by a successive multiple ionic-polymer layer (SMIL) coating technique to the immobilization of polypeptides and/or proteins onto the inner surface of the capillaries was investigated to provide a high-performance separation medium for proteins and enantiomers in capillary electrophoresis (CE). To obtain a stable protein-coated capillary, high molecular mass poly(ethyleneimine) (PEI) was employed as the first layer in the A(+)-B(-)-C(+) coating, and then a cationic protein was immobilized as the third layer. Comparisons of analytical performances between the A(+)-B(-)-C(+) coating and the conventional SMIL-coated (A(+)-B(-)-A(+) coating) capillary were conducted. The CE separation of cationic proteins was successfully achieved with the prepared capillaries. In addition, the polypeptide- and protein-coated capillaries were applied to the chiral separation of a binaphthyl compound. It should be noted that the chiral separation efficiency was strongly dependent on the second anionic polymer layer of the coating. Effects of the interaction between oppositely charged ionic polymer layers on the separation efficiency are discussed.

Use of coupled open-tubular capillaries for in-line ion-exchange preconcentration of anions by capillary electrochromatography with elution by a transient isotachophoretic gradient

Open-tubular capillaries have been joined together for use in on-column ion-exchange preconcentration of anions by capillary electrochromatography (CEC) with elution by a transient isotachophoretic gradient. This involved the coupling of a preconcentration capillary and a separation capillary using a PTFE sleeve. Such coupling allowed precise lengths of differently coated capillaries to be joined in-line to form a single multi-mode column. The different segments could be tailored to optimize a separation by either altering the length of each segment to precisely manipulate the amount of stationary phase present or by changing the internal diameter of each segment to alter the phase ratio in the chromatographic column without affecting the path length for UV detection. In this work, a segmented in-line capillary was used in conjunction with a fluoride-octanesulfonate discontinuous electrolyte system to increase the number of anions that could be preconcentrated and separated. Quaternary ammonium functionalised latex particles were used for creating the preconcentration segment and the separation segment was coated with poly(diallyldimethylammonium chloride). This allowed the detection of trace anions in drinking water and in situ sampling of river water for the analysis of trace inorganic anions. The repeatability of producing the quaternary ammonium functionalized latex-coated segments was assessed and the effect of segmentation on peak efficiency was investigated.

Enantioseparations in capillary electromigration techniques: recent developments and future trends

This review summarizes the current status of enantioseparations using capillary electromigration techniques and gives the authors insights on the selected fundamental aspects and future trends in this field. The most recent developments in the field of chiral separations using capillary electrophoresis (CE) and capillary electrochromatography (CEC) are summarized. The status of chiral electromigration techniques is evaluated tacking into account the most recent developments in related techniques such as chiral HPLC, GC and SFC.