Characteristics of voltammograms for ion transfer through a membrane

Distribution of ion pairs into a bilayer lipid membrane and its effect on the ionic permeability

This work reports the distribution constant of a target ion and a counter-ion between an aqueous phase and an artificial bilayer lipid membrane (BLM) and its influence to the ionic permeability through a BLM. A theoretical formula for ionic permeability through a BLM based on the distribution of the target ion and the counter-ion is also proposed and validated by analyzing the flux of a fluorescent cation [rhodamine 6G (R6G⁺)] through the BLM in the presence of counter-ions (X^- = Br^-, BF₄^-, and ClO₄^-). The transmembrane flux was evaluated by simultaneous measurement of the transmembrane current density and the transmembrane fluorescence intensity as a function of the membrane potential. The distribution constant of R6G⁺ and X^- between the aqueous and BLM phases was determined by a liposome-extraction method. The measured ionic permeability exhibited non-linear dependent on the aqueous concentration of R6G⁺ or X^-, but proportional to the concentration of R6G⁺ and X^- inside the BLM evaluated from the distribution constant of R6G⁺ and X^-. The proportionality demonstrates that the distribution of cations and anions between the aqueous and BLM phases dominates the flux of ion transport through the BLM. The proposed formula can express the dependence of the transmembrane current on the membrane potential and the concentrations of R6G⁺ and X^- in the aqueous phase.

Ion amperometry at the interface between two immiscible electrolyte solutions in view of realizing the amperometric ion-selective electrode

This article reviews the development in ion amperometry at the interface between two immiscible electrolyte solutions (ITIES) in view of realizing the amperometric ion-selective electrode (ISE). The concept of polarizability of ITIES in a multi-ion system is outlined. Principle aspects of ion amperometry at ITIES are discussed including the use of amperometry as a tool for the clarification of the ion sensing mechanism, and for determining the concentrations of ions in the solution. The reference is made to recent amperometric measurements at the supported liquid membrane (SLM) and polymer composite liquid membranes (PCLM), which, together with the micro-hole supported ITIES, appear to be particularly suitable for realization of the amperometric ISE.

Ion transfer through solvent polymeric membranes driven by an exponential current flux

General analytical equations which govern ion transfer through liquid membranes with one and two polarized interfaces driven by an exponential current flux are derived. Expressions for the transient and stationary E-t, dt/dE-E and dI/dE-E curves are obtained, and the evolution from transient to steady behaviour has been analyzed in depth. We have also shown mathematically that the voltammetric and stationary chronopotentiometric I(N)-E curves are identical (with E being the applied potential for voltammetric techniques and the measured potential for chronopotentiometric techniques), and hence, their derivatives provide identical information.

High lipophilicity of perfluoroalkyl carboxylate and sulfonate: implications for their membrane permeability

Here we report on remarkably high lipophilicity of perfluoroalkyl carboxylate and sulfonate. A lipophilic nature of this emerging class of organic pollutants has been hypothesized as an origin of their bioaccumulation and toxicity. Both carboxylate and sulfonate, however, are considered hydrophilic while perfluroalkyl groups are not only hydrophobic but also oleophobic. Partition coefficients of a homologous series of perfluoroalkyl and alkyl carboxylates between water and n-octanol were determined as a measure of their lipophilicity by ion-transfer cyclic voltammetry. Very similar lipophilicity of perfluoroalkyl and alkyl chains with the same length is demonstrated experimentally for the first time by fragment analysis of the partition coefficients. This finding is important for pharmaceutical and biomedical applications of perfluoroalkyl compounds. Interestingly, approximately 2 orders of magnitude higher lipophilicity of a perfluoroalkyl carboxylate or sulfonate in comparison to its alkyl counterpart is ascribed nearly exclusively to their oxoanion groups. The higher lipophilicity originates from a strong electron-withdrawing effect of the perfluoroalkyl group on the adjacent oxoanion group, which is weakly hydrated to decrease its hydrophilicity. In fact, the inductive effect is dramatically reduced for a fluorotelomer with an ethylene spacer between perfluorohexyl and carboxylate groups, which is only as lipophilic as its alkyl counterpart, nonanoate, and is 400 times less lipophilic than perfluorononanoate. The high lipophilicity of perfluoroalkyl carboxylate and sulfonate implies that their permeation across such a thin lipophilic membrane as a bilayer lipid membrane is limited by their transfer at a membrane/water interface. The limiting permeability is lower and less dependent on their lipophilicity than the permeability controlled by their diffusion in the membrane interior as assumed in the classical solubility-diffusion model.

Development of Rotating Liquid Membrane Disk Electrode and Rotating Liquid Membrane Ring-Liquid Membrane Disk Electrode and Evaluation of Characteristics of Ion Transfer Reactions at the Rotating Aqueous|Organic Solution Interface

A liquid membrane disk electrode, LMDE, and a liquid membrane ring-liquid membrane disk electrode, LMRE-LMDE, were developed by placing a gelled polyvinyl chloride thin membrane impregnated with 2-nitrophenyl octyl ether, NPOE-LM, on the surface of a glassy carbon, GC, disk or ring electrode. The voltammogram for the ion transfer at the interface between an aqueous solution, W, and NPOE-LM was recorded by setting the developed electrode in W and rotating at a rate, omega, between 0 and 4000 rpm. The sensitivity of the ion-transfer current at the WINPOE-LM interface, I, was enhanced to be more than 100 times better than that at the WINPOE (solution) interface when LMDE was rotated at omega higher than 200 rpm. The reversibility of the ion transfer reaction could be evaluated based on the dependence of I on omega of LMDE, and the reaction product at LMDE could be identified at LMRE when the rotating LMRE-LMDE system was adopted.

Electroneutrality Coupling of Electron Transfer at an Electrode Surface and Ion Transfer across the Interface between Thin-layer of 1-Octyl-3-methylimidazolium Bis(perfluoroalkylsulfonyl)imide Covering the Electrode Surface and an Outer Electrolyte Solution

The electrode reaction of decamethylferrocene (DMFc) dissolved in a thin layer of a room-temperature molten salt (RTMS), 1-octyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (C8mimC1C1N) or 1-octyl-3-methylimidazolium bis(pentafluoroethylsulfonyl)imide (C8mimC2C2N), on a self-assembled monolayer-modified gold electrode is coupled with the ion transfer across the interface between the RTMS and the outer aqueous solution (W) to give a voltammogram whose shape resembles a voltammogram of a simple one-electron transfer process. The electroneutrality of the RTMS layer during the oxidation of DMFc to decamethylferricenium ion is maintained by the concomitant dissolution of C8mim+ ion from the RTMS phase to the W phase, and the reduction of decamethylferricenium ion to DMFc is accompanied by the transfer of either C1C1N- or C2C2N- from RTMS to W. The midpoint potential of the voltammogram varies with the concentration of the salt in the aqueous phase, C8mimCl or LiCnCnN (n = 1 or 2), in a Nernstian manner, showing that the phase-boundary potential between the RTMS and the W is controlled by the partition of these ions. Although the phase-boundary potential across the RTMS / W interface is Nernstian with respect to the ions common to both phases at the equilibrium, the polarization at the RTMS / W interface under current flow distorts the shape of the voltammograms, resulting in a wider peak separation in the voltammogram.