Electrochemical characterisation of platinum–palladium nanoparticles prepared in a water-in-oil microemulsion

Effect of Pd on the Electrocatalytic Activity of Pt towards Oxidation of Ethanol in Alkaline Solutions

The understanding of electrocatalytic activity and poisoning resistance properties of Pt and Pd nanoparticles, recognized as the best electrocatalysts for the ethanol oxidation reaction, is an essential step for the commercialization of direct ethanol fuel cells (DEFCs). In this paper, mono and bimetallic Pt and Pd nanoparticles with different atomic ratios have been synthesized to study their electrocatalytic properties for an ethanol oxidation reaction in alkaline solutions. The different nanoparticles were physiochemically characterized by transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The electrochemical characterization was performed by cyclic voltammetry and chronoamperometry measurements. The electrochemical measurements indicate that Pt nanoparticles have much higher electrocatalytic activity for ethanol oxidation than Pd nanoparticles. The studies with bimetallic PtPd nanoparticles showed a significant impact of their composition on the ethanol oxidation. Thus, the highest electrocatalytic activity and poisoning resistance properties were obtained for Pt3Pd2 nanoparticles. Moreover, this study demonstrates that the poisoning of the catalyst surface through ethanol oxidation is related to the prevalence of the acetaldehyde–acetate route and the polymerization of acetaldehyde through aldol condensation in the alkaline media.

Mono and dual hetero-structured M@poly-1,2 diaminoanthraquinone (M = Pt, Pd and Pt–Pd) catalysts for the electrooxidation of small organic fuels in alkaline medium

Oxidation of some small organic fuels such as methanol (MeOH), ethanol (EtOH) and ethylene glycol (EG) was carried out in an alkaline medium using palladium (Pd)–platinum (Pt) nanoparticles/poly1,2-diaminoanthraquinone/glassy carbon (p1,2-DAAQ/GC) catalyst electrodes. Pd and Pt were incorporated into the p1,2-DAAQ/GC electrode using the cyclic voltammetry (CV) technique. The obtained Pd/p1,2-DAAQ/GC, Pt/p1,2-DAAQ/GC, Pt/Pd/p1,2-DAAQ/GC and Pd/Pt/p1,2-DAAQ/GC nanocatalyst electrodes were characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX) and CV methods. Real active surface area (A_real) achieved by carbon monoxide (CO) adsorption using differential electrochemical mass spectroscopy (DEMS) technique. The electrochemical activity was evaluated and normalized to A_real per metal loading mass. The electrocatalytic oxidation of the small organic fuels at the prepared nanocatalyst electrodes was studied in 1.0 M NaOH solutions by CV and chronoamperometric (CA) techniques. Pt/Pd/p1,2-DAAQ/GC nanocatalyst electrode exhibited enhanced catalytic activity, better durability and higher tolerance to carbon monoxide generated in the oxidation reaction when compared with the other three studied nanocatalysts. The present investigation suggests that the studied nanocatalysts can be successfully applied in direct oxidation of small organic fuels, especially MeOH.

Oxidation reaction of some small organic fuels such as methanol, ethanol and ethylene glycol was carried out in alkaline medium at palladium (Pd)–platinum (Pt) nanoparticles/poly1,2-diaminoanthraquinone/glassy carbon catalyst electrodes.

An alternative to hydrogenation processes. Electrocatalytic hydrogenation of benzophenone

The electrocatalytic hydrogenation of benzophenone was performed at room temperature and atmospheric pressure using a polymer electrolyte membrane electrochemical reactor (PEMER). Palladium (Pd) nanoparticles were synthesised and supported on a carbonaceous matrix (Pd/C) with a 28 wt % of Pd with respect to carbon material. Pd/C was characterised by transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). Cathodes were prepared using Pd electrocatalytic loadings (L_Pd) of 0.2 and 0.02 mg cm⁻². The anode consisted of hydrogen gas diffusion for the electrooxidation of hydrogen gas, and a 117 Nafion exchange membrane acted as a cationic polymer electrolyte membrane. Benzophenone solution was electrochemically hydrogenated in EtOH/water (90/10 v/v) plus 0.1 M H₂SO₄. Current densities of 10, 15 and 20 mA cm⁻² were analysed for the preparative electrochemical hydrogenation of benzophenone and such results led to the highest fractional conversion (X_R) of around 30% and a selectivity over 90% for the synthesis of diphenylmethanol upon the lowest current density. With regards to an increase by ten times the Pd electrocatalytic loading the electrocatalytic hydrogenation led neither to an increase in fractional conversion nor to a change in selectivity.

Electrocatalytic oxidation of ethanol at Pd, Pt, Pd/Pt and Pt/Pd nano particles supported on poly 1,8-diaminonaphthalene film in alkaline medium

An ethanol oxidation reaction (EOR) in alkaline medium was carried out at palladium (Pd) or platinum (Pt) nanoparticles/poly 1,8-diaminonaphthalene (p1,8-DAN) composite catalyst electrodes. Pd and Pt were incorporated onto a p1,8-DAN/GC electrode by a cyclic voltammetry (CV) strategy. The obtained Pd/p1,8-DAN/GC, Pt/p1,8-DAN/GC, Pt/Pd/p1,8-DAN/GC and Pd/Pt/p1,8-DAN/GC modified electrodes were characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX) and cyclic voltammetry (CV) techniques. Electrode surface areas (ESAs) of the obtained catalysts were calculated by carbon monoxide (CO) adsorption using differential electrochemical mass spectroscopy (DEMS). The electrocatalytic oxidation of ethanol (EtOH) at the catalyst electrodes was considered in 0.5 M NaOH solutions by CV and chronoamperometric techniques. The catalyst electrodes significantly enhanced the catalytic efficiency for EOR compared to a bare glassy carbon (GC) electrode. Bimetallic catalyst electrodes demonstrate improved catalytic activity, superior durability and higher tolerance to (CO) poison generated in the development of EOR compared with Pd/p1,8-DAN and Pt/p1,8-DAN catalysts, giving priority to Pt/Pd/p1,8-DAN/GC electrodes. Viability parameters, such as NaOH and EtOH concentrations, scan rate and upper potential limits, were examined and analyzed. This study suggests that the prepared catalysts have pronounced potential applications in direct EOR in fuel cells.

An ethanol oxidation reaction (EOR) in alkaline medium was carried out at palladium (Pd) or platinum (Pt) nanoparticles/poly 1,8-diaminonaphthalene (p1,8-DAN) composite catalyst electrodes.

Nitrate Reduction on Platinum (111) Surfaces Modifiedl with Bi: Single Crystalsl and Nanoparticles

Nitrate reduction on well-oriented platinum surfaces modified with Bi adatoms has been studied. The quantification of the electrocatalytic enhancement of the reaction rate due to the presence of Bi at different coverages was made on Pt(111) and the vicinal surfaces Pt(554) and Pt(332). These contain 9 and 5 atoms-width (111) terraces, respectively, separated by (110) monoatomic steps. The study was then extended to preferentially {111}Pt oriented nanoparticles. In all cases, Bi catalyzes nitrate reduction at high potentials, but the catalytic current suddenly drops when Bi is reduced. The analysis of the variation of catalytic activity with Bi coverage reveals the participation of a third body effect, meaning that Bi impedes the NO formation on the surface that acts as a poison for the nitrate reduction.

Preparation, characterization and catalytic properties of Pd-Fe-zeolite and Pd-Ce-zeolite composite catalysts

Highly effective composite catalysts for removal of CO by catalytic oxidation have been designed through constructing active centers on the support of zeolite. Performances of the derived Pd-Fe-zeolite and Pd-Ce-zeolite composite catalysts for CO removal under different heterogeneous conditions were studied. The results indicate that the two kinds of promoted catalysts, including special chemical states of Pd and surface active oxygen, show high catalytic activities not only for the low temperature oxidation of CO, but also for CO electro-oxidation. The typical light-off temperatures of Pd-Fe-zeolite and Pd-Ce-zeolite for low temperature CO oxidation are 270 and 273 K. Their characteristic peak potentials for CO electro-oxidation are both around 0.70 V. The promotional effects are associated with the special interaction among Pd, modifier and zeolite, which can be firmly supported by the detailed characterizations using XRD, BET, XPS, TPD and TPR.

Biosynthesis of platinum nanoparticles by Escherichia coli MC4100: can such nanoparticles exhibit intrinsic surface enantioselectivity?

The biomanufacture of two types of platinum bionanoparticle (bioNP) using Escherichia coli MC4100(1% and 20% by mass metal loading) together with a method for both liberating the nanoparticles (NPs) from the bacterial layer and their subsequent critical cleaning is reported. The possibility of an enantiomeric excess of chiral kink sites forming on the surface of the Pt nanoparticles produced by the bacteria was investigated using the electrooxidation of D- and L-glucose as the chiral probe. Transmission electron microscopy revealed that the Pt bioNPs (after recovery and cleaning) were typically 2.3 ± 0.7 nm (1% loading) and 4.5 ± 0.7 nm (20% loading) in diameter. The D- and L-glucose electrooxidation measurements did not give rise to any chiral response using either of the Pt bioNPs types but did display differing CV profiles. This suggested that the overall surface morphology of each bioNP could be controlled by the degree of metal loading but that no enantiomeric excess of intrinsically chiral surface kink sites was present.

Measurement of benzenethiol adsorption to nanostructured Pt, Pd, and PtPd films using Raman spectroelectrochemistry

Raman spectroscopy and electrochemical methods were used to study the behavior of the model adsorbate benzenethiol (BT) on nanostructured Pt, Pd, and PtPd electrodes as a function of applied potential. Benzenethiol adsorbs out of ethanolic solutions as the corresponding thiolate, and voltammetric stripping data reveal that BT is oxidatively removed from all of the nanostructured metals upon repeated oxidative and reductive cycling. Oxidative stripping potentials for BT increase in the order Pt < PtPd < Pd, indicating that BT adsorbs most strongly to nanoscale Pd. Yet, BT Raman scattering intensities, measured in situ over time scales of minutes to hours, are most persistent on the film of nanostructured Pt. Raman spectra indicate that adsorbed BT desorbs from nanoscale Pt at oxidizing potentials via cleavage of the Pt-S bond. In contrast, on nanoscale Pd and PtPd, BT is irreversibly lost due to cleavage of BT C-S bonds at oxidizing potentials, which leaves adsorbed sulfur oxides on Pd and PtPd films and effects the desulfurization of BT. While Pd and PtPd films are less sulfur-resistant than Pt films, palladium oxides, which form at higher potentials than Pt oxides, oxidatively desulfurize BT. In situ spectroelectrochemical Raman spectroscopy provides real-time, chemically specific information that complements the cyclic voltammetric data. The combination of these techniques affords a powerful and convenient method for guiding the development of sulfur-tolerant PEMFC catalysts.