Origin of the infrared reflectance increase produced by the adsorption of CO on particulate metals deposited on moderately reflecting substrates

Surface Sensitive Infrared Spectroelectrochemistry using Palladium Electrodeposited on ITO-Modified Internal Reflection Elements

Palladium nanoparticles have been electrodeposited on the surfaces of conductive indium tin oxide (ITO) modified silicon internal reflection elements. The resulting films are shown to be excellent platforms for attenuated...

In-Situ Infrared Spectroscopy Applied to the Study of the Electrocatalytic Reduction of CO2 : Theory, Practice and Challenges

The field of electrochemical CO₂ conversion is undergoing significant growth in terms of the number of publications and worldwide research groups involved. Despite improvements of the catalytic performance, the complex reaction mechanisms and solution chemistry of CO₂ have resulted in a considerable amount of discrepancies between theoretical and experimental studies. A clear identification of the reaction mechanism and the catalytic sites are of key importance in order to allow for a qualitative breakthrough and, from an experimental perspective, calls for the use of in-situ or operando spectroscopic techniques. In-situ infrared spectroscopy can provide information on the nature of intermediate species and products in real time and, in some cases, with relatively high time resolution. In this contribution, we review key theoretical aspects of infrared reflection spectroscopy, followed by considerations of practical implementation. Finally, recent applications to the electrocatalytic reduction of CO₂ are reviewed, including challenges associated with the detection of reaction intermediates.

Fluorescent iridium nanoclusters for selective determination of chromium(VI)

Fluorescent iridium nanoclusters (IrNCs) consisting of up to 7 Ir atoms were prepared by heating IrCl₃ in N,N-dimethylformamide. No other reagents are required. High resolution transmission electron microscopy (HRTEM) shows the IrNCs to be monodispersed with an average size of 0.9 ± 0.2 nm. They are well soluble in polar solvents and stable in these solvents for at least 6 months. Under photoexcitation with 365 nm light, they emit strong bluish green fluorescence with peaks that depend on the excitation wavelength and range from 530 to 650 nm. The fluorescence lifetime typically is 2.2 ns and the quantum yield is 8.3%. Fluorescence is quenched by Cr(VI) ion (chromate), and the emission peak is gradually red-shifted. According to the absorbance spectra of IrNCs in the presence and absence of Cr(VI) and Stern-Volmer quenching behavior study, static quenching is involved. Based on these findings, a selective assay was developed for the determination of Cr(VI). It has a linear response in the 0.1 to 100 μM chromate concentration range and a 25 nM detection limit. Graphic abstract Fluorescent iridium nanoclusters (IrNCs), consisting of up to 7 Ir atoms, were prepared in N,N-dimethylformamide (DMF) solution without using any other reagents. Their fluorescence is statically quenched by Cr(VI).

In-situ infrared spectroscopic studies of electrochemical energy conversion and storage

With their ability to convert chemical energy of fuels directly into electrical power or reversibly store electrical energy, systems such as fuel cells and lithium ion batteries are of great importance in managing energy use. In these electrochemical energy conversion and storage (EECS) systems, controlled electrochemical redox reactions generate or store the electrical energy, ideally under conditions that avoid or kinetically suppress side reactions. A comprehensive understanding of electrode reactions is critical for the exploration and optimization of electrode materials and is therefore the key issue for developing advanced EECS systems. Based on its fingerprint and surface selection rules, electrochemical in-situ FTIR spectroscopy (in-situ FTIRS) can provide real-time information about the chemical nature of adsorbates and solution species as well as intermediate/product species involved in the electrochemical reactions. These unique features make this technique well-suited for insitu studies of EECS. In this Account, we review the characterization of electrode materials and the investigation of interfacial reaction processes involved in EECS systems by using state-of-the-art in-situ FTIR reflection technologies, primarily with an external configuration. We introduce the application of in-situ FTIRS to EECS systems and describe relevant technologies including in-situ microscope FTIRS, in-situ time-resolved FTIRS, and the combinatorial FTIRS approach. We focus first on the in-situ steady-state and time-resolved FTIRS studies on the electrooxidation of small organic molecules. Next, we review the characterization of electrocatalysts through the IR properties of nanomaterials, such as abnormal IR effects (AIREs) and surface enhanced infrared absorption (SEIRA). Finally, we introduce the application of in-situ FTIRS to demonstrate the decomposition of electrolyte and (de)lithiation processes involved in lithium ion batteries. The body of work summarized here has substantially advanced the knowledge of electrode processes and represents the forefront in studies of EECS at the molecular level.

Adsorption/oxidation of CO on highly dispersed Pt catalyst studied by combined electrochemical and ATR-FTIRAS methods: oxidation of CO adsorbed on carbon-supported Pt catalyst and unsupported Pt black

ATR-FTIRAS measurements combined with linear potential sweep voltammetry were conducted to investigate oxidation of CO adsorbed on a highly dispersed Pt catalyst supported on carbon black, Pt/C, and carbon-unsupported Pt black catalyst, Pt-B. Bands nu(CO) of atop- and bridge-bonded COs were resolved into those of COs adsorbed at terrace and step edge sites by curve-fitting analysis. At the high coverage near the saturation, a band around 1950-1960 cm(-1) assigned to asymmetric bridge-bonded CO, CO(B)(asym), was observed to develop on both Pt/C and Pt-B, which was the predominant type on the latter. Preferential oxidation of atop-CO adsorbed at the step edge site was commonly observed on both Pt/C and Pt-B during the potential sweep from 0.05 to 1.2 V. However, it has been found that CO(B)(asym) is the most reactive species. The high reactivity of the CO(B)(asym) on Pt/C and Pt-B is demonstrated for the first time in the present report. Adsorption of CO on the Pt/C and Pt-B resulted in growth of a sharp nu(OH) band around 3642-3645 cm(-1) which is assigned to non-hydrogen-bonded water molecules coadsorbed with CO. The nu(OH) band frequency exhibits a linear increase with potential with a Stark tuning rate of ca. 20 cm(-1)/V. Analysis of the potential dependence of this band in the CO oxidation potential region led us to conclude that this is the oxygen-containing species to oxidize adsorbed CO. Stark tuning rates of nu(CO) bands for the COs at the terrace and step edge sites on both Pt/C and Pt-B are almost independent of the adsorption sites for both atop- and bridge-bonded COs. However, CO(B)(asym) exhibits tuning rates of 41 cm-1/V and 37 cm-1/ V on Pt/C and Pt-B, respectively, which is in between the rates of atop and symmetric bridge-bonded COs.

Electrochemical preparation and structural characterization of Co thin films and their anomalous IR properties

Nanometer scale cobalt thin films of different structures and thicknesses supported on glassy carbon were prepared by electrochemical deposition under cyclic voltammetric conditions (denoted nm-Co/GC(n)). The thickness of Co thin films was altered systematically by varying the number (n) of potential cycling within a defined potential range in electrodeposition. Electrochemical in situ scanning tunneling microscopy (STM) and ex situ scanning electron microscopy (SEM) were employed to characterize the surface structure of Co thin films. It has been illustrated that the Co thin films were uniformly composed of Co nanoparticles, whose structure and size varied with increasing n. The structure of nanoparticles inside the Co thin films underwent a transition from bearded nanoparticles to multiform nanoparticles and finally to hexagonal nanosheets, accompanying with an increase of average size. In situ FTIR reflection spectroscopic studies employing CO adsorption as probe reaction revealed that the Co thin films all exhibited anomalous IR properties; that is, along with their different nanostructures they presented abnormal IR effects, Fano-like IR effects, and surface-enhanced IR absorption effects. CO adsorbed on Co thin films dominated by bearded nanoparticles yielded abnormal IR absorption bands; that is, the direction of the bands is inverted completely, with enhanced intensity in comparison with those of CO adsorbed on a bulk Co electrode. The enhancement of abnormal IR absorption has reached a maximal value of 26.2 on the nm-Co/GC(2) electrode. Fano-like IR features, which describe the bipolar IR bands with their positive-going peak on the low wavenumbers side, were observed in cases of CO adsorbed on Co thin films composed mainly of multiform nanoparticles, typically on the nm-Co/GC(8) electrode. IR features were finally changed into surface-enhanced IR absorption as CO adsorbed on the nm-Co/GC(30) electrode, on which the Co thin film is dominated by Co hexagonal nanosheets.

Ubiquitous Strategy for Probing ATR Surface-Enhanced Infrared Absorption at Platinum Group Metal−Electrolyte Interfaces

A versatile two-step wet process to fabricate Pt, Pd, Rh, and Ru nanoparticle films (simplified as nanofilms hereafter) for in situ attenuated total reflection Fourier transform infrared (ATR-FTIR) study of electrochemical interfaces is presented, which incorporates an initial chemical deposition of a gold nanofilm on the basal plane of a silicon prism with the subsequent electrodepostion of desired platinum group metal overlayers. Galvanostatic electrodeposition of Pt, Rh, and Pd from phosphate or perchloric acid electrolytes, or potentiostatic electrodeposition of Ru from a sulfuric acid electrolyte, yields sufficiently "pinhole-free" overlayers as evidenced by electrochemical and spectroscopic characterizations. The Pt group metal nanofilms thus obtained exhibit strongly enhanced IR absorption. In contrast to the corresponding metal films electrochemically deposited directly on glassy carbon and bulk metal electrodes, the observed enhanced absorption for the probe molecule CO exhibits normal unipolar band shapes. Scanning tunneling microscopic (STM) images reveal that fine nanoparticles of Pt group metals are deposited around wavy and stepped bunches of Au nanoparticles of relatively large sizes. This ubiquitous strategy is expected to open a wide avenue for extending ATR surface-enhanced IR absorption spectroscopy to explore molecular adsorption and reactions on technologically important transition metals, as exemplified by successful real-time spectroscopic and electrochemical monitoring of the oxidation of CO at Pd and that of methanol at Pt nanofilm electrodes. The spectral features of free water molecules coadsorbed with CO on Pt, Pd, Rh, and Ru are also discussed.

In Situ STM Studies of Electrochemical Growth of Nanostructured Ni Films and Their Anomalous IR Properties

We have extended the study of anomalous IR properties, which were initially discovered on nanostructured films of platinum group metals and alloys, to nanostructured films of nickel, a member of the iron group triad, and broadened the fundamental knowledge on this subject. Nanostructured thin films of nickel supported on glassy carbon [nm-Ni/GC(n)] were prepared by electrochemical deposition under cyclic voltammetric conditions, and the thickness of films was altered systematically by varying the number (n) of potential cycling within a defined potential range for electrodeposition. Electrochemical in situ scanning tunneling microscopy (STM) was employed to monitor the electrochemical growth of nanostructured Ni films. These in situ STM images illustrated that, along the increase of the film thickness, Ni films have undergone a transformation from layer structure to island structure and finally to lumpish arris structure. Investigations by in situ FTIR spectroscopy employing adsorbed CO as the probe revealed that these nanostructures of Ni films yield abnormal IR features, Fano-like IR features, and normal IR features, respectively. The IR bands of CO adsorbed on Ni thin films of a layer structure were inverted in their direction and enhanced in their intensity up to 15.5 times on an nm-Ni/GC(4) electrode. The Fano-like IR features, which are defined as a bipolar band with its negative-going peak on the low wavenumber side and its positive-going peak on the high wavenumber side, are observed for the first time on Ni thin films of an island nanostructure, i.e., at the nm-Ni/GC(16) electrode. IR features changed to normal absorption in CO adsorbed on the nm-Ni/GC(25) electrode, i.e., that with lumpish arris nanostructured Ni film of a larger thickness.

Electrochemical infrared characterization of CO comains on ruthenium-decorated platinum nanoparticles

Spectra obtained by electrochemical infrared reflection absorption spectroscopy (EC-IRAS) for carbon monoxide (CO) adlayers formed by partial CO dosing on various ruthenium-decorated platinum nanoparticle films are reported. The need to achieve a well distributed rather than aggregated metal nanoparticle array is demonstrated, given that such nanoparticle aggregates induce complex dielectric behavior. The strategy here is to use an "organic glue matrix" (short chain SAMs) between the nanoparticles and the gold substrates. The observed promotion in CO electrooxidation by the existence of a Ru island on Pt nanoparticles, of interest to fuel-cell catalysis, showed a strong relationship with Ru surface concentrations, consistent with previous studies on single crystal or polycrystalline bimetallic surfaces. Two distinctive CO infrared bands, one for the Pt-CO and one for Ru-CO domain were found after the dipole coupling of CO within the two CO domains was minimized. Interestingly, those two CO bands showed independent electrooxidation behavior with electrode potential changes. Also, it is shown that the electrooxidation of CO on large Ru islands is less facile than on small Ru islands. In addition, the activity of commercial Pt/Ru alloy nanoparticles to CO stripping was tested and IRAS spectra were reported as a comparison to our Ru-decorated Pt nanoparticles.