In vitro wear of resin denture teeth

Clinical wear of different types of denture teeth after one year in service: A clinical study

STATEMENT OF PROBLEM

Worn denture teeth are a common reason for replacing complete dentures. However, clinical studies on the amount of denture tooth wear are lacking.

PURPOSE

The purpose of this clinical study was to compare the clinical wear of denture teeth made from double cross-linked (DCL) versus highly cross-linked (HCL) materials after 1 year in service.

MATERIAL AND METHODS

Fourteen participants received maxillary and mandibular removable complete dentures (RCDs). The participants randomly received either DCL or HCL teeth. Each RCD was scanned with an intraoral scanner 1 week after finishing any occlusal adjustment and after 1 year. Occlusal contact marks were recorded using articulating paper, and photographs were made in centric and eccentric movements. The generated 1-week and 1-year standard tessellation language (STL) files of the scans were obtained and trimmed using the Geomagic X software program. After merging the files, the depth of the wear facets was measured using the software program tool that measures the vertical gap distance in micrometers at 100 points distributed on the contact areas. These areas were identified by using the segment tools in the software program. Repeated measures ANOVA was used to analyze the differences between the collected data (α=.05).

RESULTS

The DCL had higher mean ±standard deviation wear (62.7 ±40 µm) than the HCL (37 ±31 µm) after 1 year in service (P<.001).

CONCLUSIONS

Both DCL and HCL denture teeth showed acceptable clinical wear after 1 year of clinical use. HCL denture teeth showed more resistance to occlusal wear than DCL denture teeth.

Evaluating the effects of different beverages with daily consumption habits on the wear of restorative materials

The aim of this study was to investigate the cumulative effects of fruit juices and/or alcoholic beverages on wear track area of the restorative materials by simulating the oral environment in vitro. A microhybrid, a sub-microhybrid, a nanofill resin composite, and a giomer material were used. A daily exposure habits model was created to simulate consumption frequency of acidic and/or alcoholic beverages. Two-body wear tests were carried out using a reciprocating wear tester. ANOVA and Tukey's HSD tests were used for statistical analyses (p < 0.05). When considering experimental groups related to daily exposure habits, statistical difference was found between restorative materials in terms of wear track area (p < 0.01). Joint effect of rmaterial and exposure on wear track area was statistically significant (p < 0.01). Giomer was found to be more affected by acidic and alcoholic beverages. Microhybrid resin composites showed less wear than the other restorative materials. Cumulative effects of alcoholic beverages and fruit juice on wear track area of materials could be related to material's composition and frequency of consumption of acid or ethanol-containing beverages. Daily cumulative effect of acidic and alcoholic beverages was found to be stronger than only acidic fruit juice consumption in terms of wear track area. The plasticizing effect and the concentration of ethanol in the alcoholic beverages provided the basis for the increased wear track area on the restorative materials.

In Vitro Investigation of Wear of CAD/CAM Polymeric Materials Against Primary Teeth

The aim of the study was to evaluate the effects of polymeric computer-aided design/computer-aided manufacturing CAD/CAM materials on antagonistic primary tooth wear. Five CAD/CAM polymeric materials were examined: Vipi Block Monocolor (VBM), Yamahachi polymethylmethacrylate (PMMA) (YAP), Mazic Duro (MZD), Vita Enamic (ENA), and Pekkton (PEK). All of the specimens were tested in a thermomechanical loading machine with the primary canine as the antagonist (50 N, 1.2 × 10⁵ cycles, 1.7 Hz, 5/55 °C). The wear losses of the antagonist tooth and the restorative materials were calculated using reverse modelling software and an electronic scale. VBM and ENA showed significantly higher antagonist tooth wear than PEK (p < 0.05), but there was no significant difference observed among VBM, YAP, MZD, and ENA (p > 0.05). PEK showed the largest value in both material volumetric and weight losses. In terms of material volumetric losses, there was no significant difference between all of the groups (p > 0.05). In terms of material weight losses, PEK was significantly larger than ENA (p < 0.05), but there was no significant difference between VBM, YAP, MZD, and ENA (p > 0.05). Volumetric and weight losses of materials showed similar wear behaviour. However, the wear patterns of antagonists and materials were different, especially in PEK.

Efeito do desafio ácido nas propriedades superficiais das camadas externa e interna de dentes acrílicos reforçados

Resumo Introdução Os dentes acrílicos artificiais devem apresentar característica de resistência aos ácidos, a fim de assegurar a manutenção de suas propriedades, ao longo de sua vida útil. Entretanto, não há estudos disponíveis na literatura pertinente sobre as propriedades superficiais de dureza e rugosidade das diferentes camadas de resina acrílica que compõem os dentes artificiais submetidos a ensaios de erosão simulada. Objetivo Avaliar a dureza e rugosidade superficiais das camadas externa e interna de dentes artificiais acrílicos reforçados submetidos a desafio ácido. Metodologia Molares (SR Postaris e Trilux) seccionados transversalmente foram avaliados inicialmente quanto à dureza Vickers e rugosidade. Esses ensaios foram repetidos após metade das amostras de cada tipo de dente (n=10) ser imersa em água destilada (controle) e outra metade em vinagre durante 15 min/dia por 28 dias. Os resultados foram analisados por ANOVA 2-critérios e teste de Tukey (α=0,05). Resultado A dureza inicial da camada externa dos dois diferentes tipos de dente não sofreu alteração significativa pelo desafio ácido (p>0,05) e a imersão em vinagre não causou efeito deletério à dureza inicial da camada interna dos dois tipos de dentes avaliados (p>0,05). Após 28 dias, a rugosidade inicial de ambos os tipos de dentes estudados, para as duas camadas, não foi alterada com água ou vinagre (p>0,05). Conclusão Os dentes acrílicos reforçados foram resistentes ao desafio ácido uma vez que suas camadas interna e externa não apresentaram alteração significativa de dureza e rugosidade superficiais.

Surface properties of multilayered, acrylic resin artificial teeth after immersion in staining beverages

Objective

To evaluate the effect of staining beverages (coffee, orange juice, and red wine) on the Vickers hardness and surface roughness of the base (BL) and enamel (EL) layers of improved artificial teeth (Vivodent and Trilux).

Material and Methods

Specimens (n=8) were stored in distilled water at 37°C for 24 h and then submitted to the tests. Afterwards, specimens were immersed in one of the staining solutions or distilled water (control) at 37°C, and the tests were also performed after 15 and 30 days of immersion. Data were analyzed using 3-way ANOVA and Tukey’s test (α=0.05).

Results

Vivodent teeth exhibited a continuous decrease (p<0.0005) in hardness of both layers for up to 30 days of immersion in all solutions. For Trilux teeth, similar results were found for the EL (p<0.004), and the BL showed a decrease in hardness after 15 days of immersion (p<0.01). At the end of 30 days, this reduction was not observed for coffee and water (p>0.15), but red wine and orange juice continuously reduced hardness values (p<0.0004). Red wine caused the most significant hardness changes, followed by orange juice, coffee, and water (p<0.006). No significant differences in roughness were observed for both layers of the teeth during the immersion period, despite the beverage (p>0.06).

Conclusions

Hardness of the two brands of acrylic teeth was reduced by all staining beverages, mainly for red wine. Roughness of both layers of the teeth was not affected by long-term immersion in the beverages.

Different Occlusal Schemes in a Persistent Protruding Complete Denture Wearer

Different types of artificial teeth and occlusal designs can be used in complete dentures. Bilateral balanced occlusion, lingualized occlusion, canine guidance, and monoplane are the main occlusal designs; however there is no agreement on which tooth arrangement is ideal for achieving success in complete dentures. This report presents an alternative for persistent involuntary protruding complete denture wearers through the use of artificial teeth with higher cusps. Due to an old and worn pair of complete dentures, the patient had the habit of protruding. New dentures were made with Biotone artificial teeth and in the trial session, the patient would still protrude. A new set was made with Premium artificial teeth, which present higher cusps. With these dentures, the involuntary protrusion did not occur. From the delivery to the follow-up sessions, the patient stopped protruding.

Full Mouth Oral Rehabilitation by Maxillary Implant Supported Hybrid Denture Employing a Fiber Reinforced Material Instead of Conventional PMMA

Many people have life-long problems with their dentures, such as difficulties with speaking and eating, loose denture, and sore mouth syndrome. The evolution of dental implant supported prosthesis gives these patients normal healthy life for their functional and esthetic advantages. This case report presents the fabrication of maxillary implant supported hybrid prosthesis by using Nanofilled Composite (NFC) material in teeth construction to rehabilitate a complete denture wearer patient.

Wear behavior of seven artificial resin teeth assessed with three-dimensional measurements

STATEMENT OF PROBLEM

Artificial resin teeth are widely used for removable dental prostheses because of their excellent properties. An evaluation of their wear behavior is important for predicting good clinical performance.

PURPOSE

The purpose of the study was to examine the wear behavior of 7 different artificial resin teeth with 3-dimensional measurements.

MATERIAL AND METHODS

The artificial denture teeth tested were 2 composite resin teeth (Yamahachi PX, Huge Kaijing), 3 cross-linked acrylic resin teeth (Cosmo HXL, Premium 8, Vita Lingoform), and 2 conventional acrylic resin teeth (Yamahachi FX, Shengjian). The specimens were subjected to an abrasive tester for masticatory simulation. The wear loss (vertical loss and volume loss) was determined with a confocal laser scanning microscope. Data were analyzed with 1-way ANOVA followed by the Games-Howell post hoc test (α=.05).

RESULTS

The mean vertical loss and volume loss for all cross-linked acrylic resin teeth (0.987-1.03 μm, 0.858-0.939 mm(3) × 10(-3)) were higher than for all composite resin teeth (0.636-0.698 μm, 0.507-0.650 mm(3) × 10(-3), P<.001) but lower than those for conventional acrylic resin teeth Yamahachi FX and Shengjian (1.39 μm, 1.24 mm(3) × 10(-3); 12.1 μm, 16.4 mm(3) × 10(-3); P<.001). No significant differences for wear loss were found between the Vita Lingoform group and the other cross-linked acrylic resin teeth (P>.05).

CONCLUSION

The wear behavior of the artificial teeth examined differed with regard to their compositions. The composite resin teeth and high cross-linked acrylic resin teeth found superior wear resistance over the conventional acrylic resin teeth.

Effect of chemical and microwave disinfection on the surface microhardness of acrylic resin denture teeth

PURPOSE

The purpose of this study was to evaluate the effect of simulated disinfections (2% glutaraldehyde, 1% sodium hypochlorite, and microwave energy) on the surface hardness of Trilux, Biocler, Biotone, New Ace, and Magister commercial artificial teeth.

MATERIALS AND METHODS

Specimens (n = 10) were made with the teeth included individually in circular blocks of acrylic resin, leaving the labial surface exposed. Cycles of simulated chemical disinfection were accomplished with the specimens immersed in the solutions at room temperature for 10 minutes, followed by tap water washing for 30 seconds and storage in distilled water at room temperature for 7 days until the next disinfection. Simulated disinfection by microwave energy was carried out in a domestic oven with 1300 W at a potency of 50% for 3 minutes with the specimens individually immersed in 150 ml of distilled water. Control (no disinfection) and the experimental groups (first and third disinfection cycles) were submitted to Knoop hardness measurements with indentations at the center of the labial tooth surface. Data were submitted to repeated measure two-way ANOVA and Tukey's test (α = 0.05).

RESULTS

Biocler, Magister, and Trilux showed lower surface microhardness when submitted to microwave. Lower microhardness for Biotone was promoted by hypochlorite, while no significant difference was shown for New Ace. The third disinfection cycle significantly decreased the tooth surface hardness only for microwave.

CONCLUSIONS

Different disinfection methods promoted different effects on the microhardness of different types of artificial teeth. Surface microhardness of the teeth was less affected by the simulated chemical disinfections when compared to microwaved specimens.

Factors affecting wear of composite resin denture teeth--24-month results from a clinical study

The objectives of this study were to measure the occlusal wear of composite resin denture teeth in patients wearing a complete denture and to evaluate factors affecting wear. Fifty participants provided with complete dentures in at least one jaw were included. Gypsum casts were made from preliminary vinyl polysiloxane impressions 4 weeks after insertion, then after 6 (t(1)), 12 (t(2)), and 24 months (t(3)). Three-hundred and three posterior denture teeth were evaluated after 24 months. Wear was measured indirectly, from the casts, by means of a three-dimensional laser scanner device. Sequential images of the occlusal surfaces were digitized and superimposed (occlusal matching). Statistical analysis was performed by the use of mixed regression models, with the patient being a random effect. Mean wear (median, interquartile range; micrometer) of the entire occlusal surface was 8 (19) at t(1), 18 (34) at t(2), and 40 (61) at t(3). Maximum vertical loss (median, interquartile range; micrometer) was 92 (112) at t(1), 146 (148) at t(2), and 226 (184) at t(3). The dental status of the opposing jaw and the nature of the opposing material significantly affected the wear of denture teeth at t (3). Gender, daily wearing time, jaw, and type of tooth had no significant effects on the extent of wear. Clinically relevant vertical loss of composite resin denture teeth occurs after 24 months. Considering the limitations of this study, wear of denture teeth was affected by dental status and opposing material. The results suggest that wear of composite resin denture teeth exceeds that of enamel.

An in vitro analysis of wear resistance of commercially available acrylic denture teeth

Posterior denture teeth wear faster than the anterior teeth, causing occlusal prematurities and loss of vertical dimension of occlusion. The loss of vertical dimension of occlusion lays more stress on the anterior alveolar ridge, which in turn increases the rate of residual ridge resorption and causes loss of alveolar ridge height in the anterior segment and compromises esthetics. Hence it is important for the clinician to choose acrylic resin teeth with high wear resistance. The objective of the study is to investigate and compare the wear resistance of three different commercially available acrylic resin denture teeth. 60 specimens were tested for wear resistance in terms of loss of weight and loss in volume on a wear and friction monitor for 5,000 cycle wear periods (total of 10,000 cycles) under a 0.20 kg load.

STATISTICAL ANALYSIS USED

The findings were analyzed using one way analysis of variance (ANOVA) and Tukey HSD test. Comparison of weight loss and volume loss between Surana ultradent, Premadent and Dentek showed highly significant difference, Surana ultraddent having better wear resistance. Surana ultradent acrylic resin denture had highest wear resistance amongst the three groups of tested samples.

Three-body wear of resin denture teeth with and without nanofillers

STATEMENT OF PROBLEM

The wear behavior of newly developed denture teeth with nanofillers may be different from teeth with other chemical formulations.

PURPOSE

The purpose of this study was to examine the 3-body wear resistance of 11 different commercially available resin denture teeth.

MATERIAL AND METHODS

The materials tested were conventional (SR Orthotyp PE, Orthognath) and cross-linked acrylic resin teeth without inorganic fillers (Premium 8, SR Postaris DCL, Trubyte Portrait, Artiplus), composite resin teeth with inorganic fillers (SR Orthosit PE, Vitapan), and composite resin teeth (experimental materials) with inorganic nanofillers (NC Veracia Posterior, e-Ha, Mondial). Human enamel and a ceramic denture tooth (Lumin Vacuum) were used as reference materials. The 3-body wear test was performed in a wear machine developed by the Academic Center for Dentistry Amsterdam (ACTA), with millet suspension acting as an abrasive medium (n=10, test load: 15 N, slip rate: 20%, number of cycles: 100,000). Wear was determined with the aid of a profilometer. Data were analyzed with the Kruskal-Wallis test and Mann-Whitney U test using the closed testing approach (significance level for familywise error rate, alpha=.05).

RESULTS

None of the acrylic and composite resin materials tested in this study demonstrated the 3-body wear resistance of ceramic teeth or human enamel. Teeth with inorganic fillers demonstrated significantly lower wear values than conventional or cross-linked acrylic resin teeth without fillers. Composite resin teeth with traditional fillers showed significantly lower wear than composite resin teeth with nanofillers.

CONCLUSIONS

Denture teeth with and without inorganic fillers differed significantly with regard to the degree of wear generated in the ACTA wear simulator. The incorporation of nanofillers did not improve the wear resistance compared to teeth with traditional fillers.

Abrasion wear resistance of different artificial teeth opposed to metal and composite antagonists

One of the most important properties of artificial teeth is the abrasion wear resistance, which is determinant in the maintenance of the rehabilitation's occlusal pattern.

Weight loss of five commercially available denture teeth after toothbrushing with three different dentifrices

Brushing is the most common cleansing method employed on complete dentures and it may damage the integrity of acrylic resin, the main component of this type of prosthesis. This study evaluated the abrasion resistance of artificial teeth with different number of acrylic layers, and the abrasiveness of specific and non-specific dentifrices for denture cleaning. The abrasion test was conducted by a tooth brushing device, using soft toothbrushes under load (200g). Sixty artificial teeth specimens were manufactured, 12 from each brand: Vipi-Dent Plus (Dental Vipi), Trubyte Biotone (Dentsply), Trilux (Ruthinium), Ivostar (Ivoclar) and SR Vivodent PE (Ivoclar). Three brands of dentifrices were selected: Colgate (Colgate-Palmolive), Bonyplus (Bonyf AG) and Dentu-Creme (Dentco). Distilled water was used as control. The brushing time was 100 minutes, at 356 strokes/minute. The specimens were weighed on an analytical balance before and after the abrasion test. Analysis of dentifrices' abrasive particles was made by scanning electron microscopy (SEM). Two-way ANOVA and Tukey tests were employed (a=0.05). The general mean of weight loss values were obtained: 6.1 mg (Ivostar); 6.0 mg (Trilux); 5.9 mg (Trubyte); 5.8 mg (Vipi); 5.3 mg (Vivodent). The abrasiveness difference among teeth brands was not statistically significant. The Colgate dentifrice produced the greatest weight reduction (10.1 mg), followed by Dentu-Creme (7.6 mg). Bonyplus was the least abrasive (2.4 mg), similar to the distilled water used as control group (3.1 mg) (p=0.05). It was concluded that all acrylic teeth presented similar abrasion resistance. Specific dentifrices for dentures tend to cause less damage to acrylic resin.

Two-body wear of artificial acrylic and composite resin teeth in relation to antagonist material

STATEMENT OF PROBLEM

Wear resistance is one of the most important physical properties of artificial resin teeth, and its dependence on the antagonist material has not been clearly established.

PURPOSE

The purpose of this in vitro study was to investigate the wear resistance of representative artificial resin teeth in relation to antagonist material.

MATERIAL AND METHODS

Twenty-four standardized specimens were prepared for each of 8 tooth types representative of anterior and posterior artificial acrylic and composite resin teeth (Gnathostar, SR Orthosit PE, Condyloform II NFC, SR Postaris DCL, SR Vivodent PE, VITA Physiodens, SR Antaris DCL, Bioplus), for a total of 192 specimens. Each specimen was prepared to a diameter of 5 mm and a thickness of 2 mm on the buccal/facial tooth surfaces. The specimens were then polished and subjected to simulated mastication (50 N, 1.2 x 10(5) cycles, 1.2 Hz) using a pin-on-block design and additional thermocycling (600 cycles, 5/55 degrees C, 2 min/cycle). Three antagonists (artificial resin teeth, steel, steatite) were prepared, and 8 specimens per tooth type were tested for each antagonist. Vertical substance and volume loss were analyzed using cast replicas and an optical 3-dimensional (3-D) surface profilometer, as well as scanning electron microscopy. Data were analyzed using 2- and 1-way ANOVA and the Games-Howell test (alpha=.05).

RESULTS

For both vertical substance and volume loss, significant differences were found for the various antagonists. Lowest overall mean values (SD) for vertical substance and volume loss were measured for artificial tooth antagonists (26 (10) microm to 95 (46) microm, 1.5 (1.5) microm(3) to 10.5 (9) microm(3)), and the highest values were measured for steatite antagonists (95 (23) microm to 723 (168) microm, 8 (4) microm(3) to 245 (109) microm(3)). Intermediate mean values (SD) for vertical substance and volume loss were measured for steel antagonists (118 (88) microm to 205 (120) microm, 9 (7) microm(3) to 28 (24) microm(3)). Using artificial teeth and steel antagonists, few significant differences in wear resistance were found between the various resin teeth. In contrast, significant differences were observed with steatite antagonists.

CONCLUSIONS

The use of steatite antagonists allowed for significantly better differentiation of wear behavior between various artificial teeth than the use of artificial resin teeth or steel antagonists.

Mass loss of four commercially available heat-polymerized acrylic resins after toothbrushing with three different dentifrices

The association between a toothbrush and a dentifrice is the most used denture cleaning method. The purpose of this study was to evaluate the abrasiveness of specific and non-specific denture cleaning dentifrices on different heat-polymerized acrylic resins. Sixteen specimens (90x30x3mm) of each acrylic resin (QC-20, Lucitone 550, Clássico, Vipi-Cril) were prepared and randomly assigned to 4 groups: 1: control (distilled water), 2: Colgate, 3: Bonyplus and 4: Dentu-Creme. The specimens were subjected to simulated toothbrushing in an automatic brushing machine using 35,600 brush strokes for each specimen. Brushing abrasion run at a 200-g load with the specimens immersed in 2:1 dentifrice/water slurry. Specimens were reconditioned to constant mass and the mass loss (mg) was evaluated. Data were analyzed by 2-way ANOVA and Tukey's test (α=0.05). Analysis of dentifrices' abrasive particles was made by scanning electron microscopy. Colgate produced the greatest mass reduction (42.44 mg, p<0.05), followed by Dentu-Creme (33.60 mg). Bonyplus was the less abrasive (19.91 mg), similar to the control group (19.69 mg) (p>0.05). The mass loss values indicated that QC-20 (33.13 mg) and Lucitone 550 (33.05 mg) resins were less (p<0.05) resistant to abrasion than Clássico (26.04 mg) and Vipi-Cril (23.43 mg). In conclusion, Colgate produced the greatest abrasion. Specific dentifrices for dentures tend to cause less damage to acrylic resins.

Wear of feldspathic ceramic, nano-filled composite resin and acrylic resin artificial teeth when opposed to different antagonists

The aim of this study was to evaluate the wear of denture teeth and their antagonists produced by two-body and three-body wear tests. Three types of denture teeth, namely feldspathic ceramic (FC), nano-filled composite resin (NCR), and experimental acrylic resin teeth (AR), were tested. For each type two groups of eight upper premolars each were prepared. The first group was tested against cusps from the same material and the second group was tested against human enamel cusps. Each group was loaded with a total of 200,000 chewing cycles (two-body wear 100,000 cycles and three-body wear 100,000 cycles). Wear was analyzed by measuring the maximum depth and volume loss of the denture teeth using a laser scanner and by measuring the vertical loss of the antagonists using an optical macroscope. Statistically, there was no significant difference between the following combinations: FC-FC and NCR-NCR regarding the vertical and volume loss; and FC-enamel and NCR-enamel regarding the total vertical substance loss. The combinations AR-AR and AR-enamel showed higher wear values than the other combinations. For complete dentures, composite resin and ceramic teeth showed similar vertical and volume loss, whereas composite resin teeth seemed to be more suitable for partial dentures opposing natural teeth in terms of wear of teeth and antagonists.

In vitro wear resistance of three types of polymethyl methacrylate denture teeth

The wear resistance of denture teeth is important to the longevity of removable prostheses of edentulous patients. The ability of denture teeth to maintain a stable occlusal relationship over time may be influenced by this property. The purpose of this in vitro study was to evaluate the wear resistance of polymethyl methacrylate (PMMA) denture teeth based on their chemical composition when opposed by a ceramic antagonist. The maxillary canines (n=10) of 3 PMMA denture teeth (Trubyte Biotone, cross-linked PMMA; Trilux, highly cross-linked IPN (interpenetrating polymer network)-PMMA; and Vivodent, highly cross-linked PMMA) were secured in an in vitro 2-body wear-testing apparatus that produced sliding contact of the specimens (4.5 cycles/s, sliding distance of 20 mm, under 37°C running water) against glazed or airborne particle abraded ceramic. Wear resistance was measured as height loss (mm) under 300 g (sliding force) after 100,000 cycles, using a digital measuring microscope. Mean values were analyzed by 2-way ANOVA and Tukey's test (α=0.05). The wear of Trubyte Biotone (0.93 ± 0.14 mm) was significantly higher than that of both other types of teeth tested against abraded ceramic (p<0.05). The Vivodent tooth (0.64 ± 0.17 mm) exhibited the best wear resistance among the denture teeth tested against airborne particle abraded ceramic. There were no statistically significant differences (p>0.05) in wear among the 3 denture teeth evaluated against glazed ceramic. Trilux and Vivodent teeth tested against either glazed or airborne particle abraded ceramic did not differ significantly from each other (p<0.05). All teeth showed significantly more wear against airborne particle abraded ceramic than against glazed ceramic (p<0.05). In conclusion, the three types of PMMA denture teeth presented significantly different wear resistance against the abraded ceramic. The high-strength PMMA denture teeth were more wear-resistant than the conventional PMMA denture tooth.

Two-body wear of resin and ceramic denture teeth in comparison to human enamel

OBJECTIVES

To evaluate the two-body wear resistance of different artificial denture teeth when opposed to steatite ceramic balls in a dual-axis chewing simulator.

METHODS

Artificial denture teeth including the ceramic tooth Bonartic CT, the composite resin tooth Condyloform II NFC, the acrylic resin teeth Bonartic TCR, Orthognath, Polystar Selection, SR Orthotyp DCL, and Vitapan Cuspiform, and human maxillary premolars were tested in a chewing simulator. Wear resistance was analyzed measuring vertical substance loss and volume loss using profilometry and an optical macroscope after various chewing cycles (49N, up to 1,200,000 cycles). Data were statistically analyzed using one-way analysis of variance (ANOVA) followed by the Fisher test (LSD) at p< or =0.05.

RESULTS

After 1,200,000 chewing cycles the mean vertical substance loss and volume loss for the composite resin teeth (117microm and 0.144mm3) were significantly lower than for all acrylic resin teeth (149-166microm and 0.220-0.292mm3) (p< or =0.05), but higher than for ceramic teeth (36microm and 0.029mm3) and for enamel (56microm and 0.033mm3) (p< or =0.05). No significant differences were found among the acrylic resin teeth for both parameters (p>0.05).

SIGNIFICANCE

The composite resin showed improved in vitro two-body wear resistance compared to modern acrylic resin denture teeth; however, it showed less wear resistance than ceramic teeth and human enamel. Ceramic teeth should be preferred over natural teeth when occlusal stability is considered a high priority.

Wear of resin denture teeth by two-body contact

OBJECTIVES

The objective of this study was to examine the two-body wear resistance of nine different resin denture teeth and one experimental material.

METHODS

The two-body wear test was performed in a chewing simulator with an antagonistic Al(2)O(3) ball under an axial load of 40 N for 100,000 cycles. In each test series, an enamel sample was included as a reference. The wear was determined with an optical 3D surface profilometer. For statistical evaluation, SPSS for Windows was used.

RESULTS

The samples of Artiplus (18.7-SD 21.0) and e-Ha (21.2-SD 15.1) showed the lowest volumetric wear (in mm(3)x10(-3)) after 100,000 cycles. The difference from the other materials tested, except NC Veracia Posterior, was statistically significant (p=0.001-0.037). SR-Postaris-DCL (55.0-SD 6.8), SR-Orthosit-PE (61.1-SD 12.4) and Vitapan (72.1-SD 15.9) exhibited medium-sized wear values with low dispersion, whereas Orthognat (80.1-SD 31.6), Premium 8 (84.6-SD 31.4), NC Veracia Posterior (87.0-SD 52.7), SR-Orthotyp-PE (114.6-SD 28.0) and Trubyte Portrait (123.0-SD 45.6) showed high wear values with great variations. Statistically provable differences were found between SR-Orthotyp-PE and SR-Postaris-DCL (p=0.019) and also between SR-Orthotyp-PE and SR-Orthosit-PE (p=0.031). For enamel, a medium-sized wear value of 66.1-SD 76.8 was determined.

SIGNIFICANCE

The denture teeth examined showed differences in two-body wear resistance. The wear values determined were in some cases higher and in others lower than those of natural enamel. A definite connection between the wear resistance and the chemical composition of the materials could not be found in this investigation.

Effect of Mica and Glass on Acrylic Teeth Material's Color

The purpose of this study was to evaluate the effect of two different ratios of silanized mica filler and milled glass fiber reinforcement on the color of acrylic denture teeth materials. Ten acrylic resin discs made of acrylic denture teeth material (PMMA) obtained from the manufacturer were used as the control group. Four experimental groups were modified from the control group's PMMA material by adding a ratio of 5% or 10% by weight of silane-treated mica filler or milled glass fibers. Each group consisted of 10 specimens. Measurements were performed using a spectrophotometer CM-2600d, and the color changes were characterized in the Commission Internationale d'Eclairage L*a*b* color space. deltaE* values of 5% mica-, 10% mica-, 5% glass-, and 10% glass-containing sample groups were 2.46, 3.03, 2.16, and 2.59 respectively. There were statistically significant differences in L*, a*, and b* values between the control group and each test group. It was shown that when PMMA denture teeth material was modified with silane-treated mica filler or silane-treated milled glass fibers for the purpose of reinforcement, it would also cause significant changes to the original color of the material.

In vitro wear resistance of three types of composite resin denture teeth

STATEMENT OF PROBLEM

The wear resistance of artificial teeth is important to the life of the removable prosthesis for the edentulous patient. The ability of artificial teeth to maintain a stable occlusal relationship over time may be influenced by this property.

PURPOSE

The purpose of this in vitro study was to evaluate the wear resistance of artificial teeth based on composite resin filler content when opposed by a denture tooth antagonist.

MATERIAL AND METHODS

The right first molars (both maxillary and mandibular) of 3 composite resin denture teeth (Endura, 47% organic filler; Duradent, 42% organic and inorganic filler; and Duracross, 68% organic filler) were secured in an in vitro 2-body wear-testing apparatus that simulated masticatory function (60 strokes/min, grinding distance of 2 mm, under 37 degrees C flowing water). Wear resistance was assessed as volume loss (mm3) and height loss (mm) at 5 kgf (grinding force) after 50,000 strokes (6 pairs for each type). The Vickers microhardness (VHN) of the occlusal surfaces was measured with a load of 50 g and a loading time of 30 seconds. After testing, the worn surfaces were observed with a scanning electron microscope (SEM). Mean values were analyzed using a 1-way analysis of variance followed by the Fisher test (alpha=.05).

RESULTS

The volume loss of Duradent teeth (0.87 +/- 0.03 mm3) was significantly higher than of the 2 other types of teeth tested (P<.001). The Duracross teeth (0.22 +/- 0.08 mm3 and 0.11 +/- 0.04 mm) exhibited the best wear resistance of the denture teeth tested. The wear resistance of the materials tested was consistent with their hardness (Endura 27.54 +/- 0.67 VHN, Duradent 24.00 +/- 0.60 VHN, Duracross 39.64 +/- 3.11 VHN). SEM observation showed that many filler particles were missing from the matrix of Duradent.

CONCLUSION

The wear resistance among the 3 types of teeth was significantly different; Duracross and Endura were more wear resistant than Duradent. Although the densities as reported by the manufacturer were similar, hardness and microstructure were the primary factors affecting the wear resistance of artificial teeth. Hardness appears to correlate with wear resistance since the wear resistance of Duradent with a lower VHN of 24 was greater than the other 2 types of teeth with greater hardness.

In Vitro Wear of Nano‐Composite Denture Teeth

PURPOSE

Few laboratory tests have been able to substantiate and quantify the wear resistances of polymeric denture teeth. This study evaluated the relative wear resistance of several types of denture teeth using an in vitro wear testing device.

MATERIAL AND METHODS

Four different types of denture teeth [nano-filled (Veracia) and micro-filled composites (SR-Orthosit, Endura, Duradent, Surpass), cross-linked acrylic (SR-Postaris, Genios-P, Creapearl, Vitapan Physiodens, Premium 8, Integral), and a conventional acrylic (Biotone)] were used. The flattened buccal surface of each denture tooth was subjected to the evaluation of Knoop hardness (n=5) and localized wear for 100,000 cycles (n=10). Wear values were determined in micrometers using a profilometer. The data for the hardness, wear depth, and worn surface areas were individually analyzed by one-way ANOVA.

RESULTS

Knoop hardness values (KHN) ranged from 28.2 to 29.8 for micro-filled composite, 18.9 to 21.6 for cross-linked acrylic, 22.7 for nano-composite, and 18.6 for conventional acrylic teeth. All micro-filled composite teeth were significantly harder than other teeth (p <0.0001). The wear depth values were 90.5 microm for the nano-composite, 69.8 to 93.0 microm for the micro-filled composite, 80.8 to 104.0 microm for the cross-linked acrylic, and 162.5 microm for conventional acrylic teeth. The worn surface areas were 5.1 mm2 for the nano-composite, 2.6 to 3.6 mm2 for the micro-filled composite, 4.4 to 5.7 mm2 for the cross-linked acrylic, and 10.1 mm2 for conventional acrylic teeth. The wear values of the acrylic control were significantly different from all other denture teeth (p <0.001).

CONCLUSION

The nano-composite tooth was harder and more wear resistant than the acrylic teeth but not significantly different from most of the cross-linked and micro-filled composite teeth tested.