Fate and effects of polydimethylsiloxane (PDMS) in marine environments

Sustainable formulation polymers for home, beauty and personal care: challenges and opportunities

As society moves towards a net-zero future, the need to adopt more sustainable polymers is well understood, and as well as plastics, less visible formulation polymers should also be included within this shift. As researchers, industries and consumers move towards more sustainable products there is a clear need to define what sustainability means in fast moving consumer goods and how it can be considered at the design stage. In this perspective key challenges in achieving sustainable formulation polymers are highlighted, and opportunities to overcome them are presented.

Are silicone foul-release coatings a viable and environmentally sustainable alternative to biocidal antifouling coatings in the Baltic Sea region?

To combat unwanted fouling on immersed hulls, biocidal antifouling coatings are commonly applied to vessels trafficking the Baltic Sea. Here, the efficacy, environmental sustainability and market barriers of silicone foul-release coatings (FRCs) was assessed for this region to evaluate their viability as replacements for biocidal coatings. Coated panels were exposed statically over a 1 year period at three locations in the Baltic Sea region to assess the long-term performance of a biocide-free FRC and two copper coatings. The FRC was found to perform equally well or significantly better than the copper coatings. Even though most silicone FRCs on the market are biocide-free, a review of the literature regarding toxic effects and the identity and environmental fate of leachables shows that they may not be completely environmentally benign, simply for the lack of biocides. Nonetheless, FRCs are substantially less toxic compared to biocidal antifouling coatings and their use should be promoted.

Silicones in dermatological topical drug formulation: Overview and advances

Silicones, more specifically those of the polydimethylsiloxane type, have been widely used in the pharmaceutical industry for decades, particularly in topical applications. In the dermatological field, in addition to provide undeniable textural and sensory benefits, they can play important functions in the physicochemical properties, stability and biopharmaceutical behavior of these formulations. However, despite the notable advances that can be attributed to the family of silicones, the reputation of these compounds is quite bad. Indeed, silicones, even if they derive from sand, are synthetic compounds. Moreover, they are not biodegradable. They flow into our wastewater and oceans, accumulating in the fauna and flora. This obviously raises many concerns in the common imagination. Do silicones represent a danger for our environment? Should the human species worry about long term toxic effects? Are the claimed benefits really that important? After exploring the various applications of silicone excipients in topical dermatological formulations with a special focus on recent advances which open breathtaking prospects for dermatological applications, this paper shed light on the specific challenges involved in preparation of silicone-based drug as well as, the in vivo behavior of these polymers, the toxicological and environmental risks associated with their application.

Methylsiloxanes in street dust from Hefei, China: Distribution, sources, and human exposure

Methylsiloxanes are widely found in the environment and have been of increasing concern because of their strong resistance to degradation and potential toxicity to organisms. However, little is known about the distributions of these chemicals in street dust and the associated human health risks. This study investigated three cyclic (D₄-D₆) and nine linear methylsiloxanes (L₅-L₁₃) in street dust from Hefei, China and found total concentrations in the range of 183-1030 (median, 527) ng/g dry weight. The linear congeners were dominant and represented a median of 85.3% of the total methylsiloxanes. D₅ contributed 90.0% of the total concentrations of cyclic methylsiloxanes. In this study, higher concentrations of dust methylsiloxanes were found in the industrial area relative to the other functional areas. A source assessment indicated that the linear and cyclic methylsiloxanes in the street dust were mainly from the industrial and traffic activities, respectively, in addition to important sources of the use of siloxanes-containing products. The estimated median daily intakes of total methylsiloxanes through street dust were 0.037 and 0.476 ng/kg-bw/d for adults and children, respectively, under high-exposure scenarios. More research is needed to characterize the occurrence of methylsiloxane in various exposure sources and the associated adverse effects on human health.

Dynamic Poly(dimethylsiloxane) Brush Coating Shows Even Better Antiscaling Capability than the Low-Surface-Energy Fluorocarbon Counterpart

Scale formation is a significant problem in a wide range of industries, including water treatment, food processing, power plants, and oilfield production. While surface modification provides a promising methodology to address this challenge, it has generally been believed that surface coatings with the lowest surface energy, such as fluorocarbon coatings, are most suitable for antiscaling applications. In contrast to this general knowledge, here we show that a liquid-like coating featuring highly mobile linear poly(dimethylsiloxane) (LPDMS) brush chains can bring an even better antiscaling performance than conventional perfluoroalkylsilane coatings, despite the fact that the former has much higher surface energy than the latter. We demonstrate that the LPDMS brush coating can more effectively inhibit heterogeneous nucleation of scale on a substrate compared with common perfluoroalkylsilane or alkylsilane coatings, and the dynamic liquid-like characteristic of the LPDMS brush coating is speculated to be responsible for its excellent nucleation inhibiting ability by reducing the affinity and effective interface interaction between the substrate and the scale nucleus. Our findings reveal the great prospect of using liquid-like coating to replace environmentally hazardous fluorine-containing organic ones as a green and cost-effective solution to address the scale problem with enhanced antiscaling performance.

Thermopneumatic Soft Micro Bellows Actuator for Standalone Operation

Typical pneumatic soft micro actuators can be manufactured without using heavy driving components such as pumps and power supplies by adopting an independent battery-powered mechanism. In this study, a thermopneumatically operated soft micro bellows actuator was manufactured, and the standalone operation of the actuator was experimentally validated. Thermopneumatic actuation is based on heating a sealed cavity inside the elastomer of the actuator to raise the pressure, leading to deflection of the elastomer. The bellows actuator was fabricated by casting polydimethylsiloxane (PDMS) using the 3D-printed soluble mold technique to prevent leakage, which is inherent in conventional soft lithography due to the bonding of individual layers. The heater, manufactured separately using winding copper wire, was inserted into the cavity of the bellows actuator, which together formed the thermopneumatic actuator. The 3D coil heater and bellows allowed immediate heat transfer and free movement in the intended direction, which is unachievable for conventional microfabrication. The fabricated actuator produced a stroke of 2184 μm, equivalent to 62% of the body, and exerted a force of 90.2 mN at a voltage of 0.55 V. A system in which the thermopneumatic actuator was driven by alkaline batteries and a control circuit also demonstrated a repetitive standalone operation.

Silicone-Based Fouling-Release Coatings for Marine Antifouling

Marine biofouling profoundly influences marine industries and activities. It slows the speed and increases the fuel consumption of ships, corrodes offshore platforms, and blocks seawater pipelines. The most effective and economical antifouling approach uses coatings. Fouling-release coatings (FRCs) with low surface free energy and high elasticity weakly adhere to marine organisms, so they can be readily removed by the water shear force. FRCs have attracted increasing interest because they are biocide-free and hence ecofriendly. However, traditional silicone-based FRCs have weak adhesion to substrates, low mechanical strength, and low fouling resistance, limiting their applications. In recent years, many attempts have been made to improve their mechanical properties and fouling resistance. This review deals with the progress in the construction of high-performance silicone-based fouling-release surfaces.

Life and death of liquid-infused surfaces: a review on the choice, analysis and fate of the infused liquid layer

We review the rational choice, the analysis, the depletion and the properties imparted by the liquid layer in liquid-infused surfaces – a new class of low-adhesion surface.

Progress in biomimetic leverages for marine antifouling using nanocomposite coatings

Because of the environmental and economic casualties of biofouling on maritime navigation, modern studies have been devoted toward formulating advanced nanoscale composites in the controlled development of effective marine antifouling self-cleaning surfaces.

Self-replenishing vascularized fouling-release surfaces

Inspired by the long-term effectiveness of living antifouling materials, we have developed a method for the self-replenishment of synthetic biofouling-release surfaces. These surfaces are created by either molding or directly embedding 3D vascular systems into polydimethylsiloxane (PDMS) and filling them with a silicone oil to generate a nontoxic oil-infused material. When replenished with silicone oil from an outside source, these materials are capable of self-lubrication and continuous renewal of the interfacial fouling-release layer. Under accelerated lubricant loss conditions, fully infused vascularized samples retained significantly more lubricant than equivalent nonvascularized controls. Tests of lubricant-infused PDMS in static cultures of the infectious bacteria Staphylococcus aureus and Escherichia coli as well as the green microalgae Botryococcus braunii, Chlamydomonas reinhardtii, Dunaliella salina, and Nannochloropsis oculata showed a significant reduction in biofilm adhesion compared to PDMS and glass controls containing no lubricant. Further experiments on vascularized versus nonvascularized samples that had been subjected to accelerated lubricant evaporation conditions for up to 48 h showed significantly less biofilm adherence on the vascularized surfaces. These results demonstrate the ability of an embedded lubricant-filled vascular network to improve the longevity of fouling-release surfaces.

Development of a polydimethylsiloxane film-based passive dosing method in the in vitro DR-CALUX® assay

In bioassays, exposure concentrations of test compounds are usually expressed as nominal concentrations. As a result of various processes, such as adsorption, degradation, or uptake, the actual freely dissolved concentration of the test compound may differ from the nominal concentration. The goal of the present study was to develop a method to dose passively the freely dissolved fraction of organic chemicals in an in vitro bioassay with adherent cells. To this end, a polydimethylsiloxane (PDMS) film-based method was developed for a reporter gene assay for dioxin-like compounds in a rat liver cell line. Polydimethylsiloxane films loaded with test compounds ensure that the concentration during exposure is in equilibrium and that the ratio between the concentration on the film and the concentration in medium is constant. Benzo[k]fluoranthene (BkF) was used as a model compound to develop the passive dosing method in transwell plates, which was further tested with a complex mixture, i.e., an extract prepared from a contaminated sediment. A higher dioxin-like activity was found when extracts were dosed by passive dosing with PDMS than when directly added to medium. Comparison with analysis of the concentration of BkF in medium shows that passive dosing of individual chemicals may not be necessary if freely dissolved concentrations are known. Use of PDMS for passive dosing of complex samples may represent a more realistic method for exposure in in vitro bioassays.

Hazard assessment of silicone oils (polydimethylsiloxanes, PDMS) used in antifouling-/foul-release-products in the marine environment

Non-eroding silicone-based coatings can effectively reduce fouling of ship hulls and are an alternative to biocidal and heavy metal-based antifoulings. The products, whose formulations and make up are closely guarded proprietary knowledge, consist of a silicone resin matrix and may contain unbound silicone oils (1-10%). If these oils leach out, they can have impacts on marine environments: PDMS are persistent, adsorb to suspended particulate matter and may settle into sediment. If oil films build up on sediments, infiltration may inhibit pore water exchange. PDMS do not bioaccumulate in marine organisms and soluble fractions have low toxicity to aquatic and benthic organisms. At higher exposures, undissolved silicone oil films or droplets can cause physical-mechanic effects with trapping and suffocation of organisms. These 'new' effects are not covered by current assessment schemes. PDMS make the case that very low water solubility and bioavailability do not necessarily preclude damage to marine environments.