Poly(hydroxybutyrate)/poly(butylene succinate) blends: miscibility and nonisothermal crystallization

How surface modification of cellulose nanocrystals affects the crystallization process of poly (β-hydroxybutyrate)

Hydroxyl groups on the surface of cellulose nanocrystals (CNC) are modified by chemical methods, CNC and the modified CNC are used as fillers to prepare PHB/cellulose nanocomposites. The absorption peak of carbonyl group of the modified CNC (CNC-CL and CNC-LA) appears in the FT-IR spectra, which proves that the modifications are successful. Thermal stability of CNC-CL and CNC-LA is better than that of pure CNC. Pure CNC is beneficial to the nucleation of PHB, while CNC-CL and CNC-LA inhibit the nucleation of PHB. The spherulite size of PHB and its nanocomposites increases linearly over time, and the maximum growth rate of PHB spherulite exists at 90 °C. Rheological analysis shows that viscous deformation plays the dominant role in PHB, PHBC and PHBC-CL samples, while the elastic deformation is dominant in PHBC-LA. According to the rheological data, the dispersion of CNC-CL and CNC-LA in PHB is better than that of CNC. This work demonstrates the impact of modified CNC on the crystallization and viscoelastic properties of PHB. Moreover, the interface enhancement effect of modified CNC on PHB/CNC nanomaterials is revealed from the crystallization and rheology perspectives.

Polyhydroxybutyrate blends: A solution for biodegradable packaging?

Poly (3-hydroxybutyrate) (PHB) is a valuable bio-based and biodegradable polymer that may substitute common polymers in packaging and biomedical applications provided that the production cost is reduced and some properties improved. Blending PHB with other biodegradable polymers is the most simple and accessible route to reduce costs and to improve properties. This review provides a comprehensive overview on the preparation, properties and application of the PHB blends with other biodegradable polyesters such as medium-chain-length polyhydroxyalkanoates, poly(ε-caprolactone), poly(lactic acid), poly(butylene succinate), poly(propylene carbonate) and poly (butylene adipate-co-terephthalate) or polysaccharides and their derivatives. A special attention has been paid to the miscibility of PHB with these polymers and the compatibilizing methods used to improve the dispersion and interface. The changes in the PHB morphology, thermal, mechanical and barrier properties induced by the second polymer have been critically analyzed in view of industrial application. The biodegradability and recyclability strategies of the PHB blends were summarized along with the processing techniques adapted to the intended application. This review provides the tools for a better understanding of the relation between the micro/nanostructure of PHB blends and their properties for the further development of PHB blends as solutions for biodegradable packaging.

Expanding Poly(lactic acid) (PLA) and Polyhydroxyalkanoates (PHAs) Applications: A Review on Modifications and Effects

The high price of petroleum, overconsumption of plastic products, recent climate change regulations, the lack of landfill spaces in addition to the ever-growing population are considered the driving forces for introducing sustainable biodegradable solutions for greener environment. Due to the harmful impact of petroleum waste plastics on human health, environment and ecosystems, societies have been moving towards the adoption of biodegradable natural based polymers whose conversion and consumption are environmentally friendly. Therefore, biodegradable biobased polymers such as poly(lactic acid) (PLA) and polyhydroxyalkanoates (PHAs) have gained a significant amount of attention in recent years. Nonetheless, some of the vital limitations to the broader use of these biopolymers are that they are less flexible and have less impact resistance when compared to petroleum-based plastics (e.g., polypropylene (PP), high-density polyethylene (HDPE) and polystyrene (PS)). Recent advances have shown that with appropriate modification methods-plasticizers and fillers, polymer blends and nanocomposites, such limitations of both polymers can be overcome. This work is meant to widen the applicability of both polymers by reviewing the available materials on these methods and their impacts with a focus on the mechanical properties. This literature investigation leads to the conclusion that both PLA and PHAs show strong candidacy in expanding their utilizations to potentially substitute petroleum-based plastics in various applications, including but not limited to, food, active packaging, surgical implants, dental, drug delivery, biomedical as well as antistatic and flame retardants applications.

Poly(l-Lactic Acid)-co-poly(Butylene Adipate) New Block Copolymers for the Preparation of Drug-Loaded Long Acting Injectable Microparticles

The present study evaluates the use of newly synthesized poly(l-lactic acid)-co-poly(butylene adipate) (PLA/PBAd) block copolymers as microcarriers for the preparation of aripiprazole (ARI)-loaded long acting injectable (LAI) formulations. The effect of various PLA to PBAd ratios (95/5, 90/10, 75/25 and 50/50 w/w) on the enzymatic hydrolysis of the copolymers showed increasing erosion rates by increasing the PBAd content, while cytotoxicity studies revealed non-toxicity for all prepared biomaterials. SEM images showed the formation of well-shaped, spherical MPs with a smooth exterior surface and no particle's agglomeration, while DSC and pXRD data revealed that the presence of PBAd in the copolymers favors the amorphization of ARI. FTIR spectroscopy showed the formation of new ester bonds between the PLA and PBAd parts, while analysis of the MP formulations showed no molecular drug-polyester matrix interactions. In vitro dissolution studies suggested a highly tunable biphasic extended release, for up to 30 days, indicating the potential of the synthesized copolymers to act as promising LAI formulations, which will maintain a continuous therapeutic level for an extended time period. Lastly, several empirical and mechanistic models were also tested, with respect to their ability to fit the experimental release data.

Sorption of chemical contaminants on degradable and non-degradable microplastics: Recent progress and research trends

Microplastics (<5 mm) are ubiquitous contaminants of growing concern. These have been found in multiple environmental compartments, including remote sites where anthropogenic activity is null. Once released, microplastics interact with multiple chemicals in the environment, many of which are classified as organic contaminants or heavy metals. Some contaminants have an affinity for microplastics, attributed to certain sorption mechanisms, and thus become vectors of hazardous chemicals. Here, we focused on the sorption behavior of degradable and non-degradable microplastics, including field and laboratory experiments. We reviewed the sorption mechanisms, namely hydrophobic interactions, electrostatic interactions, pore-filling, Van der Waals forces, hydrogen bonding, and π-π interactions, and the factors strengthening or weakening these mechanisms. Then, we analyzed the literature investigating the sorption behavior of a wide range of chemicals contaminants on microplastics, and the current knowledge regarding the occurrence of organic contaminants and heavy metals on microplastics extracted from the environment. The future perspectives and research priorities were discussed. It is apparent that degradable microplastics, such as polylactic acid or polybutylene succinate, have a greater affinity for hydrophobic contaminants than conventional synthetic non-degradable microplastics according to recent studies. However, studies assessing degradable microplastics are scarce and much research is required to further prove this point. We stated several knowledge gaps in this new line of research and suggest the future studies to follow an integrative approach, allowing to comprehend the multiple factors involved, such as ecotoxicity, bioaccumulation, and fate of the chemical contaminants.

Sorption of five organic compounds by polar and nonpolar microplastics

Microplastics (MPs) could act as a vector for various kinds of pollutants due to their small size. Compared to nonpolar and nondegradabale MPs, the sorption of organic pollutants on polar and degradable MPs has been seldom studied. In this study, the sorption behavior of two nonpolar polycyclic aromatic hydrocarbons (PAHs, phenanthrene and pyrene), two polar derivates of PAHs (1-nitronapthalene and 1-napthylamine) and a heterocyclic chemical (atrazine) by three polar MPs including polybutylene succinate (PBS), polycaprolactone (PCL) and polyurethane (PU) and a typical nonpolar MP, polystyrene (PS) were investigated. The sorption followed the pseudo-second-order kinetics and sorption equilibrium was achieved within 5 days. Sorption isotherms could be well fitted by both Linear (R²>0.946) and Freundich models (R²>0.945) and the values of nonlinear index (n) from Freundlich model in most cases were close to 1, suggesting that hydrophobic partition was a primary process controlling the sorption. The sorption coefficients (K_d) of the five organic compounds ranged from 29. 6 to 1.42 × 10⁵ (L/kg). The log K_OC/log K_OW of PAHs and derivates of PAHs on polar MPs were greater than 1, especially for 1-naphthylamine (1.30-1.40), confirming the great contribution of hydrogen bonding. PU contains a benzene ring and showed greater sorption compared the other two polar MPs, indicating the existence of π (n) -π electron donor-acceptor interactions. Morevoer, the sorption of phenanthrene and pyrene on PU were better fitted by Langmuir model and the maximum adsorption capacities were 1.06 × 10⁴ and 5.87 × 10³ mg/kg, respectively.

Preparation and characterization of Alendronate depot microspheres based on novel poly(-ε-caprolactone)/Vitamin E TPGS copolymers

In the present study, new aledronate (AL) loaded microspheres were prepared with the use of polycaprolactone (PCL)/Vitamin E d-ɑ-tocopheryl poly(ethylene glycol) 1000 succinate (TPGS) copolymers. Specifically, PCL-TPGS copolymers, prepared at several PCL to TPGS ratios (namely, 90/10, 80/20, 70/30 and 60/40 w/w) via a ring opening polymerization process, were characterized by intrinsic viscosity, proton nuclear magnetic resonance (¹H NMR), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), differential scanning calorimetry (DSC) and enzymatic hydrolysis. Results showed that as TPGS content increases the intrinsic viscosity of the copolymer (and hence, the viscosity-average molecular weight) is decreasing, while FTIR analysis showed the formation of hydrogen bonds between the —C Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]>O of PCL and the —OH of TPGS. Additionally, XRD analysis indicated that the prepared copolymers were semi-crystalline in nature, while enzymatic hydrolysis studies showed that increasing TGPS content led to increasing copolymer hydrolysis. In the following step, AL drug-loaded microspheres were prepared via single emulsification process. Scanning electron microscopy (SEM) revealed the formation of coarse drug-loaded microspheres with particle size close to 5 μm, while XRD analysis showed that the API was amorphously dispersed only in the cases of high TPGS content. Furthermore, FTIR analysis showed that the API did not interact with the copolymer components, while in vitro drug release studies showed that increasing PCL content led to decreasing API release rate. Finally, analysis of the drug release profiles suggested that the API release mechanism was solely governed by the polymer matrix erosion.

Biotic and Abiotic Synthesis of Renewable Aliphatic Polyesters from Short Building Blocks Obtained from Biotechnology

Biobased polymers have seen their attractiveness increase in recent decades thanks to the significant development of biorefineries to allow access to a wide variety of biobased building blocks. Polyesters are one of the best examples of the development of biobased polymers because most of them now have their monomers produced from renewable resources and are biodegradable. Currently, these polyesters are mainly produced by using traditional chemical catalysts and harsh conditions, but recently greener pathways with nontoxic enzymes as biocatalysts and mild conditions have shown great potential. Bacterial polyesters, such as poly(hydroxyalkanoate)s (PHA), are the best example of the biotic production of high molar mass polymers. PHAs display a wide variety of macromolecular architectures, which allow a large range of applications. The present contribution aims to provide an overview of recent progress in studies on biobased polyesters, especially those made from short building blocks, synthesized through step-growth polymerization. In addition, some important technical aspects of their syntheses through biotic or abiotic pathways have been detailed.

Risperidone Controlled Release Microspheres Based on Poly(Lactic Acid)-Poly(Propylene Adipate) Novel Polymer Blends Appropriate for Long Acting Injectable Formulations

The present study evaluates the preparation of risperidone controlled release microspheres as appropriate long-acting injectable formulations based on a series of novel biodegradable and biocompatible poly(lactic acid)⁻poly(propylene adipate) (PLA/PPAd) polymer blends. Initially, PPAd was synthesized using a two-stage melt polycondensation method (esterification and polycondensation) and characterized by 1H-NMR, differential scanning calorimetry (DSC), and powder X-ray diffraction (XRD) analyses. DSC and XRD results for PLA/PPAd blends (prepared by the solvent evaporation method) showed that these are immiscible, while enzymatic hydrolysis studies performed at 37 °C showed increased mass loss for PPAd compared to PLA. Risperidone-polyester microparticles prepared by the oil⁻water emulsification/solvent evaporation method showed smooth spherical surface with particle sizes from 1 to 15 μm. DSC, XRD, and Fourier-transformed infrared (FTIR) analyses showed that the active pharmaceutical ingredient (API) was dispersed in the amorphous phase within the polymer matrices, whereas in vitro drug release studies showed risperidone controlled release rates in all PLA/PPAd blend formulations. Finally, statistical moment analysis showed that polyester hydrolysis had a major impact on API release kinetics, while in PLA/PPAd blends with high PLA content, drug release was mainly controlled by diffusion.

Binary polyhydroxyalkanoate systems for soft tissue engineering

Progress in tissue engineering is dependent on the availability of suitable biomaterials. In an effort to overcome the brittleness of poly(3-hydroxybutyrate), P(3HB), a natural biodegradable polyester, and widen its biomedical applications, plasticising of P(3HB) with oligomeric substances of related structure has been studied. A biosynthesised medium-chain-length polyhydroxyalkanoate (mcl-PHA) copolymer, the plasticiser precursor, was obtained using vegetable waste frying oil as a sole carbon source. The mcl-PHA was transformed into an oligomeric derivative by acid hydrolysis. The plasticising effect of the oligomeric mcl-PHA on P(3HB) was studied via characterisation of thermal and mechanical properties of the blends in the course of ageing at ambient conditions. Addition of oligomeric mcl-PHA to P(3HB) resulted in softer and more flexible materials based entirely on PHAs. It was shown that the oligomeric mcl-PHA transformed highly crystalline P(3HB) into materials with a dominant amorphous phase when the content of oligomeric mcl-PHA exceeded 10 wt%. In vitro biocompatibility studies of the new binary PHA materials showed high viability and proliferation of C2C12 myoblast cells. Thus, the proposed approach for P(3HB) plasticisation has the potential for the generation of more pliable biomaterials based on P(3HB) which can find application in unique soft tissue engineering applications where a balance between stiffness, tensile strength and ductility is required.

STATEMENT OF SIGNIFICANCE

Polyhydroxyalkanoates, a broad family of natural biodegradable and biocompatible polymers, have emerged as highly promising biomaterials both for bulk and biomedical applications. Here we describe an approach to tune the mechanical properties of stiff and brittle poly(3-hydroxybutyrate) and thereby to expand its potential biomedical applications. Plasticisation, a common practice in the plastic industry to modify polymer mechanical properties, has been used very cautiously for biomedical applications due to plasticiser toxicity and migration. We have developed a plasticiser for poly(3-hydroxybutyrate) based on a structurally related but softer and pliable medium chain length polyhydroxyalkanoate. Additives of oligomeric derivatives of this polymer improved ductility of poly(3-hydroxybutyrate), greatly widening the future applicability of this well-established biomaterial. In parallel, the binary polyhydroxyalkanoate materials also exhibited improved cell attachment and proliferation, a highly desirable outcome.

Investigation of Structure and Crystallization Behavior of Poly(butylene succinate) by Fourier Transform Infrared Spectroscopy

The detailed structure and crystallization behavior of poly(butylene succinate) (PBS) have been investigated by Fourier transform infrared (FTIR) and other methods systematically. For the first time, we confirmed that the C═O stretching modes of PBS can respond to three distinguish absorption bands in the FTIR spectrum, at around 1736, 1720, and 1714 cm^-1 respectively. The 1736 cm^-1 band is adopted as the stretching mode of C═O groups in free amorphous fraction (MAF); the 1714 cm^-1 band which is relevant to more stable structure, displays more anisotropic in polarized FTIR spectra, and has been confirmed as stretching vibrations of hydrogen-bonded C═O groups in the crystalline phase. The 1720 cm^-1 band is linked to crystallization but comes from less ordered structure. Moreover, the 1720 cm^-1 band can be destroyed prior to 1714 cm^-1 band during heating and constructed behind 1714 cm^-1 band during cooling. Thus, the 1720 cm^-1 band is reasonably ascribed to the C═O groups in rigid amorphous fraction (RAF) or intermediate phase which locates between MAF and crystalline phase. The corresponding investigation by differential scanning calorimetry (DSC) and wide-angle X-ray diffraction (WAXD) further supports that the three particular C═O absorption bands indeed reveal the typical three-phase structure for PBS. More important, the FTIR spectrum of PBS is very sensitive to sample preparation process and measurement mode. The relative content of each band depends on the crystallization temperature (T_c) and measured thickness. The higher T_c, the more RAF content appears when measured at room temperature; the thinner penetration thickness of FTIR measurement, the less RAF content can be detected, and the penetration thickness-dependent behavior is suggested as the result of higher mobility of chains in the air/bulk surface. Additionally, the particular three absorption bands of C═O groups in PBS force us to carefully reconsider previous reports on structure and interaction state obtained by FTIR spectroscopy in PBS and its composites.

Effect of Composition Asymmetry on the Phase Separation and Crystallization in Double Crystalline Binary Polymer Blends: A Dynamic Monte Carlo Simulation Study

Polymer blends offer an exciting material for various potential applications due to their tunable properties by varying constituting components and their relative composition. Our simulation results unravel an intrinsic relationship between crystallization behavior and composition asymmetry. We report simulation results for nonisothermal and isothermal crystallization with weak and strong segregation strength to elucidate the composition dependent crystallization behavior. With increasing composition of low melting B-polymer, macrophase separation temperature changes nonmonotonically, which is attributed to the nonmonotonic change in diffusivity of both polymers. In weak segregation strength, however, at high enough composition of B-polymer, A-polymer yields relatively thicker crystals, which is attributed to the dilution effect exhibited by B-polymer. When B-polymer composition is high enough, it acts like a "solvent" while A-polymer crystallizes. Under this situation, A-polymer segments become more mobile and less facile to crystallize. As a result, A-polymer crystallizes at a relatively low temperature with the formation of thicker crystals. At strong segregation strength, the dilution effect is accompanied by the strong A-B repulsive interaction, which is reflected in a nonmonotonic trend of the mean square radius of gyration with the increasing composition of the B-polymer. Isothermal crystallization also reveals a strong nonmonotonic relationship between composition and crystallization behavior. Two-step, compared to one-step, isothermal crystallization yields better crystals for both polymers.

Crystallization behavior of crystalline/crystalline polymer blends under confinement in electrospun nanofibers of polystyrene/poly(ethylene oxide)/poly(ε-caprolactone) ternary mixtures

We have studied the crystallization behavior of crystalline/crystalline blends of poly(ethylene oxide) (PEO) and poly(ε-caprolactone) (PCL) in electrospun nanofibers fabricated from ternary blends of polystyrene (PS), PEO, and PCL, where PS was present as the majority component. It was demonstrated previously that PEO in PS/PEO binary blend nanofibers with a low PEO weight fraction (≦0.2) crystallized predominantly through homogenous nucleation due to the small PEO domain size which excluded the presence of heterogeneities (Soft Matter, 2016, 12, 5110). Here, it was found that PCL in PS/PCL binary blend nanofibers exhibited similar behavior, but at a much lower weight fraction of PCL (≦0.1) due to the presence of an inherently higher concentration of heterogeneities in the PCL homopolymer. In the PS/PEO/PCL ternary blend nanofibers, where the combined weight fraction of PEO and PCL was kept at 0.2 or less, the crystallization of the two components took place separately through both heterogeneous and homogenous nucleation mechanisms. The phase segregated crystallization behavior was further confirmed by the melting behavior of the blend nanofibers and wide angle X-ray diffraction (WAXD) measurements. Most significantly, the homogenous nucleation of both PEO and PCL was suppressed whereas the heterogeneous nucleation was enhanced in the ternary blend nanofibers even at very low weight fraction of PEO or PCL. This was plausibly attributed to the coupling between the crystallization and the liquid-liquid phase separation (LLPS) of the PEO/PCL mixture dispersed in the PS matrix during non-isothermal cooling of the blend nanofibers. Furthermore, it was observed that thermal treatment of the PS/PEO/PCL blend nanofibers above the glass transition temperature of PS further promoted the heterogeneous nucleation-initiated crystallization of PEO because of a complex interplay between Plateau-Rayleigh instability-induced domain breakup and its further coalescence and demixing within the PEO/PCL domains embedded in the PS matrix.

Investigations on Green Blends Comprising Biodegradable Polymer and Ionic Liquid

The green blends of an ionic liquid, 1-ethyl-3-propylimidazolium bis(trifluoromethanesulfonyl)imide {[EPrI][TFSI]}, and a biodegradable polymer, poly(3-hydroxybutyrate) (PHB), were investigated in this study. The influence of an ionic liquid on the crystallization behaviors of a biodegradable polymer was explored. In the blends, the presence of [EPrI][TFSI] decreased the Tg and Tm of PHB. Incorporating [EPrI][TFSI] in the blends reduced the degree of crystallinity of PHB, inferring that the [EPrI][TFSI] weakened the crystallization of PHB. It further showed retarded isothermal and non-isothermal crystallization for PHB with the presence of [EPrI][TFSI]. The smaller K and 1/t0.5 estimated by the Avrami equation for the blends indicated that [EPrI][TFSI] weakened the isothermal crystallization of PHB with exhibiting the slower crystallization rate. The present study also discussed non-isothermal crystallization of the blends. We found that the Mo model, which is generally used to discuss the non-isothermal crystallization, adequately described the non-isothermal behaviors of the [EPrI][TFSI]/PHB blends. By increasing the [EPrI][TFSI] content, the rate-related parameter F(T) systematically increased, inferring a decreased crystallization rate of PHB with the addition of [EPrI][TFSI] in the blends. The FTIR results suggested an ion⁻dipole interaction between [EPrI][TFSI] and PHB. This proposes the occurrence of possible complexation between [EPrI][TFSI] and PHB.

Matrix-assisted laser desorption ionization time-of-flight/time-of-flight tandem mass spectra of biodegradable polybutylenesuccinate

RATIONALE

Matrix-Assisted Laser Desorption/Ionization Time-Of-Flight/Time-Of-Flight Tandem Mass Spectrometry (MALDI-TOF MS/MS) was employed to analyze five poly(butylene succinate) (PBSu) oligomers and to investigate their fragmentation pathways.

METHODS

MALDI-TOF MS/MS analysis was performed on cyclic and linear oligomers terminated by dicarboxyl groups, carboxyl and hydroxyl groups, hydroxyl and olefin groups, and dihydroxyl groups. The sodium adduct ions of these oligomers were selected as precursor ions. Experiments were carried out with and without argon as the collision gas.

RESULTS

A β-hydrogen transfer rearrangement, leading to the selective cleavage of the -O-CH2- bonds, and cleavage of the -CH2-CO- bonds, the ester bonds, and the -CH2-CH2- bonds in the diol moiety were observed. Two fragmentation mechanisms, correlated to the end-group structure of the precursor ions, were also proposed. The detection of cyclic anhydrides was related to the presence of succinic acid terminal groups. The formation of microcyclic oligoesters probably occurred via an intramolecular transesterification mechanism involving a hydroxyl end group.

CONCLUSIONS

A β-hydrogen transfer rearrangement has been proposed as the main fragmentation mechanism occurring in PBSu without using the collision gas. Cleavages of almost all types of bonds take place in the MALDI CID experiments. According to the structures of the most abundant product ions, six fragmentation pathways have been proposed when using argon as the collision gas. Two fragmentation mechanisms were suggested as being correlated to the end-group structure of the precursor ions.