Potentiometric pH sensors based on chemically modified electrodes with electropolymerized metal-tetraaminophthalocyanine

Fabrication of CuTAPc polymer nanowires and nanotubes by electropolymerization

Poly-copper tetraaminophthalocyanine (CuTAPc) nanowires and nanotubes were successfully fabricated on porous alumina templates by electropolymerization and characterized using field-emission scanning electron microscopy (FE-SEM), energy-dispersive x-ray spectroscopy (EDX), transmission electron microscopy (TEM) and Raman microscopy. The lengths of these nanostructures could be controlled by the number of cycles applied and the monomer concentrations, while their diameters are confined by the pore size of the template. The product of electropolymerization (whether as nanowires or nanotubes) is a function of the monomer concentrations. The morphology of electropolymerized nanowires was found to be sensitive to the changes in scan rates and monomer concentrations. These organometallic nanostructures may have applications in micro-electronics, chemical sensing, and catalysis.

pH Sensitivity of Novel PANI/PVB/PS3 Composite Films

This paper reports on the results from the investigation into the pH sensitivity ofnovel PANI/PVB/PS3 composite films. The conductimetric sensing mode was chosen as itis one of the most promising alternatives to the mainstream pH-sensing methods and it is theleast investigated due to the popularity of other approaches. The films were deposited usingboth screen-printing and a drop-coating method. It was found that the best response to pHwas obtained from the screen-printed thick films, which demonstrated a change inconductance by as much as three orders of magnitude over the pH range pH2-pH11. Thedevices exhibited a stable response over 96 hours of operation. Several films were immersedin buffer solutions of different pH values for 96 hours and these were then investigated usingXPS. The resulting N 1s spectra for the various films confirmed that the change inconductance was due to deprotonation of the PANI polymer backbone. SEM andProfilometry were also undertaken and showed that no considerable changes in themorphology of the films took place and that the films did not swell or contract due toexposure to test solutions.

Determination of l-dopa using electropolymerized 3,3′,3″,3‴-tetraaminophthalocyanatonickel(II) film on glassy carbon electrode

Electropolymerized film of 3,3',3'',3'''-tetraaminophthalocyanatonickel(II) (p-Ni(II)TAPc) on glassy carbon (GC) electrode was used for the selective and stable determination of 3,4-dihydroxy-L-phenylalanine (L-dopa) in acetate buffer (pH 4.0) solution. Bare GC electrode fails to determine the concentration of L-dopa accurately in acetate buffer solution due to the cyclization reaction of dopaquinone to cyclodopa in solution. On the other hand, p-Ni(II)TAPc electrode successfully determines the concentration of L-dopa accurately because the cyclization reaction was prevented at this electrode. It was found that the electrochemical reaction of L-dopa at the modified electrode is faster than that at the bare GC electrode. This was confirmed from the higher heterogeneous electron transfer rate constant (k(0)) of L-dopa at p-Ni(II)TAPc electrode (3.35 x 10(-2) cms(-1)) when compared to that at the bare GC electrode (5.18 x 10(-3) cms(-1)). Further, it was found that p-Ni(II)TAPc electrode separates the signals of ascorbic acid (AA) and L-dopa in a mixture with a peak separation of 220 mV. Lowest detection limit of 100 nM was achieved at the modified electrode using amperometric method. Common physiological interferents like uric acid, glucose and urea does not show any interference within the potential window of L-dopa oxidation. The present electrode system was also successfully applied to estimate the concentration of L-dopa in the commercially available tablets.

State Key Laboratory of Nonlinear Mechanics (LNM), Institute of Mechanics, Chinese Academy of Sciences, Beijing 100080, China

This paper reviews current state-of-the-art methods of measuring pH levels that are based on polymer materials. These include polymer-coated fibre optic sensors, devices with electrodes modified with pH-sensitive polymers, fluorescent pH indicators, potentiometric pH sensors as well as sensors that use combinatory approach for ion concentration monitoring.

Miniaturized pH biosensors based on electrochemically modified electrodes with biocompatible polymers

Potentiometric pH sensors based on linear polyethylenimine (L-PEI) and linear polypropylenimine(L-PPI), two synthetic enzymes and biocompatible polymers, films were prepared by electropolymerization of three different monomers: ethylenediamine (EDA), 1,3-diaminopropane (1,3-DAP) and diethylenetriamine (DETA) in order to be used in clinical, dermatological and biological applications, such as in vivo analysis. In a first step a biosensor was tested which consisted in a platinum wire protruded from glass sheath. The polymer film coated on these platinum electrodes showed good linear potentiometric responses to pH changes from pH 3 to 10. Resulting electrodes present both good reversibility and good stability versus time. The effect of the different polymer film thicknesses to potentiometric responses was also studied. This study allowed us to develop a miniaturized pH biosensor in the second step. This sensor was fabricated using photo-lithography, followed by sputtering and lift-off processes, and it included an electronic detection system. We have also successfully studied the potentiometric responses to pH changes of this device over a period of 1 month, and so we propose this new pH micro-biosensor as an alternative to classical pH sensors currently used in dermatology.