Optimal conditions and sample storage for the determination of H2O2 in marine waters by the scopoletin–horseradish peroxidase fluorometric method

Phytoplankton interspecific interactions modified by symbiotic fungi and bacterial metabolites under environmentally relevant hydrogen peroxide concentrations stress

Hydrogen peroxide (H2O2), which accumulates in water and triggers oxidative stress for aquatic microbes, has been shown to have profound impacts on planktonic microbial community dynamics including cyanobacterial bloom formation. Yet, potential effects of H2O2 on interspecific relationships of phytoplankton-microbe symbiotic interactions remain unclear. Here, we investigated effects of environmentally relevant H2O2 concentrations on interspecific microbial relationships in algae-microbe symbiosis. Microbes play a crucial role in the competition between M. aeruginosa and Chlorella vulgaris at low H2O2 concentrations (∼400 nM), in which fungi and bacteria protect Microcystis aeruginosa from oxidative stress. Moreover, H2O2 stimulated the synthesis and release of extracellular microcystin-LR from Microcystis aeruginosa, while intracellular microcystin-LR concentrations remained at a relatively constant level. In the presence of H2O2, loss of organoheterocyclic compounds, organic acids and ketones contributed to the growth of M. aeruginosa, but the reduction of vitamins inhibited it. Regulation of interspecific relationships by H2O2 is achieved by its action on fungal species and bacterial secretory metabolites. This study explored the response of phytoplankton interspecific relationships in symbiotic phytoplankton-microbe interactions to environmentally relevant H2O2 concentrations stress, providing a theoretical basis for understanding the formation of harmful-algae blooming and impact of photochemical properties of water on aquatic ecological safety and stability.

Facile fabrication of laser induced versatile graphene-metal nanoparticles electrodes for the detection of hazardous molecules

In this work, we developed a facile method to fabricate laser induced versatile graphene-metal nanoparticles (LIG-MNPs) electrodes with redox molecules sensing capabilities. Unlike conventional post-electrodes deposition, versatile graphene-based composites were engraved by a facile synthesis process. As a general protocol, we successfully prepared modular electrodes including LIG-PtNPs and LIG-AuNPs and applied them to electrochemical sensing. This facile laser engraving process enables rapid preparation and modification of electrodes, as well as simple replacement of metal particles modification towards varied sensing targets. The LIG-MNPs showed high sensitivity towards H₂O₂ and H₂S due to their excellent electron transmission efficiency and electrocatalytic activity. By simply changing the types of coated precursors, the LIG-MNPs electrodes have successfully achieved real-time monitoring of H₂O₂ released from tumor cells and H₂S contained in wastewater. This work contributed a universal and versatile protocol for quantitatively detecting a wide range of hazardous redox molecules.

Cu-MOF/hemin: a bionic enzyme with excellent dispersity for the determination of hydrogen peroxide released from living cells

The stability, repeatability and sensitivity of an electrochemical biosensor material are closely connected with the dispersibility of metal organic frameworks (MOFs) in aqueous media. Herein, a nanocomposite based on Cu-MOF/hemin, which is not only highly water-soluble but also simple and efficient in synthesis, was used for the construction of a non-enzymatic sensor to detect hydrogen peroxide (H₂O₂). The Cu-MOF/hemin was characterized via scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDS)-mapping, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS) and thermal gravimetric analysis (TGA), which indicate that hemin and the Cu-MOF were successfully combined. As a H₂O₂ electrochemical biomimetic enzyme, the Cu-MOF/hemin exhibited excellent electrocatalytic performance, which was confirmed by the electrochemical experiments and chromogenic reactions, and the possible mechanism of the reactions has been deduced. The electrochemical sensor based on the biomimetic enzyme exhibited an extended linear detection range from 0.01-5.0 mM (R = 0.998), low detection limit of 4.14 μM, and high selectivity and stability under the optimized conditions. More importantly, the practical application ability of the sensor was verified by the test of H₂O₂ in human serum samples and it could be used for the real-time detection of H₂O₂ released from living cells with satisfactory results. Therefore, this novel nanocomposite has certain potential in preparing electrochemical sensing platforms for nonenzymatic biosensing and provides a new method for clinical diagnosis and real-time monitoring.

The Effect of Synthesis Procedure on Hydrogen Peroxidase-Like Catalytic Activity of Iron Oxide Magnetic Particles

A comparative study was carried out using magnetic nanoparticles (MNPs) for the fabrication of non-enzymatic sensors for the continuous and rapid detection and monitoring of H2O2. Various MNPs, differing in terms of their synthesis procedure and modification, were synthesized and characterized by different techniques. The electrochemical catalytic activity of the synthesized MNPs toward the reduction in H2O2 was investigated by cyclic voltammetry. The naked MNPs showed the highest catalytic activity among all the synthesized MNPs. The biosensor based on the naked MNPs was then applied in the determination of H2O2 using chronoamperometry. The parameters such as the applied cathodic potential and the amount of MNPs on the developed biosensor were optimized. Moreover, the analytical figures of merit, including reproducibility (RSD = 6.14%), sensitivity (m = 0.0676 µA µM−1), limit of detection (LOD) = 27.02 µmol L−1, and limit of quantification (LOQ) = 89.26 µmol L−1 of the developed biosensor indicate satisfactory analysis. Finally, MNPs were successfully utilized for the determination of H2O2 in milk.

Preparation of SnS2/MWCNTs chemically modified electrode and its electrochemical detection of H2O2

Considering the importance of hydrogen peroxide (H₂O₂) rapid detection, a SnS₂/MWCNTs composite was prepared by loading tin disulfide (SnS₂) nanoparticles on a three-dimensional conductive network composed of multi-walled carbon nanotubes (MWCNTs). The obtained SnS₂/MWCNTs composite was used as the modified material to prepare a chemically modified electrode (CME), which was used for the rapid detection of H₂O₂. The morphology and structure of the obtained samples were characterized and analyzed by scanning electron microscopy, X-ray diffraction, and energy-dispersive spectroscopy. The electrochemical performance of the modified electrode was researched by cyclic voltammetry, amperometric i-t curves, and AC impedance techniques. The results show that SnS₂ nanoparticles with a size of about 33 nm are evenly dispersed on the surface of MWCNTs. The obtained SnS₂/MWCNTs-CME has a strong current response to H₂O₂: it has a good linear relationship during the range of 0.248 ~ 16.423 mmol L^-1, and its linear regression equation is I_pa (mA) = (-0.94 ± 0.05) × 10^-2 + (- 0.43 ± 0.06) × 10^-2c (mmol L^-1) (R² = 0.997) with a sensitivity of 87.84 μA mmol^-1 L cm^-2. The corresponding detection limit is 1.04 μmol L^-1 (S/N = 3). At the same time, the SnS₂/MWCNTs-CME has good selectivity, reproducibility, and stability. Graphical abstract Uniformly distributed SnS₂/CNTs composite is used to prepare a chemically modified electrode for H₂O₂ detection. The prepared electrode has a strong electrochemical response to H₂O₂ due to the excellent conductivity and support of CNTs. And the SnS₂/CNTs electrode shows high sensitivity and selectivity for the electrochemical detection of H₂O₂.

A magnetic electrode modified with hemoglobin for determination of hydrogen peroxide: distinctly improved response by applying a magnetic field

A facile and highly sensitive biosensor was developed for the determination of hydrogen peroxide (H₂O₂) via electrochemical catalytic reduction of H₂O₂ by hemoglobin (Hb). Hb was enriched and immobilized simply in a chitosan (Chit) membrane on a magnetic electrode to construct an enzyme-like biosensor. The biosensor catalyzes the electrochemical reduction of H₂O₂ under an external magnetic field. The response improved roughly twice as Hb was adsorbed by Chit in an alkaline medium. The response of the biosensor under the magnetic field increased by 16% owing to the paramagnetism of Hb. The effect of pH values on Hb adsorption by Chit, as well as the effect of an external magnetic field on Hb configuration were investigated by UV-vis spectroscopy. The reduction peak current has linear and log-linear relationships with H₂O₂ concentration in the range of 5-250 μmol∙L^-1 and 0.01-1 μmol∙L^-1, respectively. The detection limit was 0.003 μmol∙L^-1, with a good sensitivity of 0.227 μA∙μM^-1∙cm^-2. The biosensor was successfully applied to the determination of H₂O₂ in milk samples and in disinfectant solutions. Recoveries ranged from 96.3 to 105.4%, and from 95.3 to 107.7%, respectively. Graphical abstractConstruction of the biosensor, and principle of H₂O₂ determination based on Hb bioelectrocatalysis.

A Chemiluminescent Method for the Detection of H₂O₂ and Glucose Based on Intrinsic Peroxidase-Like Activity of WS₂ Quantum Dots

Currently, researchers are looking for nanomaterials with peroxidase-like activity to replace natural peroxidase enzymes. For this purpose, WS₂ quantum dots (WS₂ QDs) were synthesized via a solvothermal method, which improved the mimetic behavior. The resulting WS₂ QDs with a size of 1⁻1.5 nm had a high fluorescence emission, dependent on the excitation wavelength. WS₂ QDs with uniform morphology showed a high catalytic effect in destroying H₂O₂. The peroxidase-like activity of synthesized nanostructures was studied in H₂O₂ chemical and electrochemical reduction systems. The mimetic effect of WS₂ QDs was also shown in an H₂O₂⁻rhodamine B (RB) chemiluminescence system. For this aim, a stopped-flow chemiluminescence (CL) detection system was applied. Also, in order to confirm the peroxidase-like effect of quantum dots, colorimetry and electrochemical techniques were used. In the enzymatic reaction of glucose, H₂O₂ is one of the products which can be determined. Under optimum conditions, H₂O₂ can be detected in the concentration range of 0⁻1000 nmol·L-1, with a detection limit of 2.4 nmol·L-1. Using this CL assay, a linear relationship was obtained between the intensity of the CL emission and glucose concentration in the range of 0.01⁻30 nmol·L-1, with a limit of detection (3S) of 4.2 nmol·L-1.

Optical properties of straw-derived dissolved organic matter and growth inhibition of Microcystis aeruginosa by straw-derived dissolved organic matter via photo-generated hydrogen peroxide

Recent advances in research on algae inhibition by using low-cost straw proposed a possible mechanism that reactive oxygen species (ROS) generated by the solar irradiation of straw-derived dissolved organic matter (DOM) might contribute to cyanobacteria inhibition. However, this process is not clearly understood. Here, DOM from three types of straw (barley, rice, and wheat) and natural organic matter (NOM) isolates were investigated in terms of their photochemical properties and ROS generating abilities. Results demonstrated that the DOM derived from the aeration decomposition of barley straw (A-DOMbs) yielded the best formation efficiencies of hydrogen peroxide (H₂O₂) and hydroxyl radicals (•OH) under solar-simulated irradiation in all organic matter samples. Correlation analysis implies that optical parameters and phenolic hydroxyl group contents can signify ROS generating abilities of different DOM solutions. Bioassay results show that A-DOMbs possesses the highest inhibition performance for M. aeruginosa in all DOM samples, much higher than those of NOM isolates. The addition of catalase greatly relieves the inhibition performance, making the loss of chlorophyll a content decreased from 37.14% to 7.83% in 2 h for A-DOMbs, which implies that for cyanobacteria growth inhibition, photochemically-produced H₂O₂ from SOM is far more important than singlet oxygen (¹O₂), •OH, and even SOM itself. Our results show that H₂O₂ photochemically generated from straw-derived DOM is able to result in rapid inhibition of M. aeruginosa in a relatively short period, furthering the understanding of complicated mechanisms of cyanobacteria inhibition by using low-cost straw in eutrophic waters.

A Novel Non-Enzymatic Electrochemical Hydrogen Peroxide Sensor Based on a Metal-Organic Framework/Carbon Nanofiber Composite

A co-based porous metal-organic framework (MOF) of zeolitic imidazolate framework-67 (ZIF-67) and carbon nanofibers (CNFs) was utilized to prepare a ZIF-67/CNFs composite via a one-pot synthesis method. Scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), and X-ray diffraction (XRD) were employed to investigate the morphology, structure, and composition of the resulting composite. A novel high-performance non-enzymatic electrochemical sensor was constructed based on the ZIF-67/CNFs composite. The ZIF-67/CNFs based sensor exhibited enhanced electrocatalytic activity towards H₂O₂ compared to a pure ZIF-67-based sensor, due to the synergistic effects of ZIF-67 and CNFs. Meanwhile, chronoamperometry was utilized to explore the detection performance of the sensor. Results showed the sensor displayed high-efficiency electrocatalysis towards H₂O₂ with a detection limit of 0.62 μM (S/N = 3), a sensitivity of 323 µA mM⁻¹ cm⁻², a linear range from 0.0025 to 0.19 mM, as well as satisfactory selectivity and long-term stability. Furthermore, the sensor demonstrated its application potential in the detection of H₂O₂ in food.

3D Interconnected Mesoporous Alumina with Loaded Hemoglobin as a Highly Active Electrochemical Biosensor for H2 O2

Alumina is one of the most common and stable metal oxides in nature, which has been developed as a novel adsorbent in enrichment of biomolecules due to its excellent affinity to phosphor or amino groups. In this study, ordered mesoporous alumina (OMA) with interconnected mesopores and surface acidic property is synthesized through a solvent evaporation induced co-assembly process using poly(ethylene oxide)-b-polystyrene (PEO-b-PS) diblock copolymer as a template and aluminium acetylacetonate (Al(acac)₃ ) as the aluminium source. The pore size (12.1-19.7 nm), pore window size (3.5-9.0 nm) and surface acidity (0.092-0.165 mmol g^-1 ) can be precisely adjusted. The highly porous structure endows the OMA materials with high hemoglobin (Hb) immobilization capacity (170 mg g^-1 ). The obtained Hb@OMA composite is used as an electrocatalyst of biosensor for convienet and fast detection of hydrogen peroxide (H₂ O₂ ) with a low H₂ O₂ detection limit of 1.7 × 10^-8 m and a wide linear range of 2.5 × 10^-8 to 5.0 × 10^-5 m. Moreover, the Hb@OMA sensors show a good performance in real time detection of H₂ O₂ released from Homo sapiens bone osteosarcoma, indicating their potential application in complex biological processes.

The Scopoletin-HRP Fluorimetric Determination of H2O2 in Seawaters-A Plea for the Two-Stage Protocol

A single solution protocol has been widely used for the fluorimetric determination of H₂O₂ in natural waters by its bleaching of the fluorescing scopoletin in the presence of the enzyme horseradish peroxidase (HRP). In this protocol, the reaction between scopoletin and H₂O₂ in the sample and the subsequent internal additions, and the measurements of the fluorescence are all carried out at a single pH in a fluorometer cell. It is found that this protocol is prone to four sources of possible error. The variability in the reaction stoichiometry between scopoletin and H₂O₂ in the presence of varying amounts of excess scopoletin, the effect of pH on the rate of reaction between scopoletin and H₂O₂, the photobleaching of scopoletin, and the de-activation of HRP. These possible sources of error can be circumvented in a two-stage protocol in which the reaction between H₂O₂ and scopoletin is carried out immediately upon sampling at a pH of 7, and the measurement of the fluorescence is carried out later on at a pH of 9. It should be the protocol of choice. Furthermore, in the two-stage protocol, after the initial reaction between H₂O₂ and scopoletin, the sample may be stored at room temperature for six days and at 4 °C for at least a month before its fluorescence is measured. This option can significantly reduce the logistics in the field.

Direct growth of MnOOH nanorod arrays on a carbon cloth for high-performance non-enzymatic hydrogen peroxide sensing

Novel MnOOH nanorod arrays directly growing on a flexible carbon cloth substrate (MnOOH/CC) is first synthesized through a facile hydrothermal technique and utilized as an electrocatalyst for non-enzymatic detection of hydrogen peroxide. The as-prepared MnOOH nanorods are uniformly distributed on the carbon cloth with a 3D porous network structure, which provides a high specific surface area and numerous electroactive sites. The electrode based on the carbon cloth-supported MnOOH nanorod arrays exhibits a higher sensitivity (692.42 μA mM(-1) cm(-2)) and a wider linear range (20 μm-9.67 mM) with a detection limit of 3.2 μM (S/N = 3) compared with the electrode based on the rigid graphite substrate supported the random distributed MnOOH nanorods. Further, the MnOOH/CC possesses an outstanding flexibility and can conveniently be assembled into the required shape for a specific use, thus the arc-shaped MnOOH/CC electrodes are fabricated whose electrocatalytic activity toward the hydrogen peroxide reduction remains nearly unchanged in comparison with the unbent state. Due to its excellent sensitivity, reproducibility, anti-interference and stability, the electrode based on the carbon cloth-supported MnOOH nanorod arrays is believed to be promising for applications in high efficiency flexible hydrogen peroxide sensing.

Photochemical production of hydrogen peroxide from natural algicides: decomposition organic matter from straw

The ability of decomposition organic matter from three natural algicides (barley, rice, and wheat straw) and natural organic matter (NOM) isolates to generate hydrogen peroxide under simulated solar irradiation was evaluated in order to understand the mechanism of indirect algae inhibition through a photochemical pathway. Specific optical properties (higher phenolic hydroxyl group contents and lower E2/E3) of barley straw organic matter (BSOM) reveal its outstanding ability to produce H2O2 as a photosensitizer. The appearance of a protein-like structure in BSOM indicated that bacteria or fungi probably transformed the structure of BSOM and brought other organic matter, which may account for its distinct optical properties. The ΦH2O2 of BSOM obtained through aerobic decomposition is 14.73 × 10(-5), which is three times the value of SRHA, whereas the ΦH2O2 value of BSOM obtained for non-aerobic decomposition was 5.30 × 10(-5), still higher than that of SRHA. The ΦH2O2 of rice straw organic matter was slightly lower than those of SRHA and SRFA, but much higher than that of wheat straw organic matter. The superior ability of BSOM to generate H2O2 was partly responsible for the outstanding potential and prior choice of barley straw for cyanobacteria or algae inhibition in various plant decomposition products.

Amperometric Hydrogen Peroxide Biosensor Based on Horseradish Peroxidase-labeled Nano-Au Colloids Immobilized on Poly(2,6-pyridinedicarboxylic acid) Layer by Cysteamine

A sensitive hydrogen peroxidase (H2O2) amperometric sensor based on horseradish peroxidase (HRP)-labeled nano-Au colloids has been proposed. Nano-Au colloids were immobilized by the thiol group of cysteamine, which was associated with the carboxyl groups of poly(2,6-pyridinedicarboxylic acid) (PPDA). With the aid of the hydroquinone, the sensor displayed excellent electrocatalytical response to the reduction of H2O2. Compared with the non-Au-colloid modified electrode, i.e., PPDA/HRP, the Au-colloid modified electrode exhibited better performance characteristics, including stability, reproducibility, sensitivity and accuracy. The biosensor shows a linear response to H2O2 in the range of 3.0 x 10(-7) - 2 x 10(-3) M. The detection limit was 1.0 x 10(-7) M.

Horseradish peroxidase: a valuable tool in biotechnology

Peroxidases have conquered a prominent position in biotechnology and associated research areas (enzymology, biochemistry, medicine, genetics, physiology, histo- and cytochemistry). They are one of the most extensively studied groups of enzymes and the literature is rich in research papers dating back from the 19th century. Nevertheless, peroxidases continue to be widely studied, with more than 2000 articles already published in 2002 (according to the Institute for Scientific Information). The importance of peroxidases is emphasised by their wide distribution among living organisms and by their multiple physiological roles. They have been divided into three superfamilies according to their source and mode of action: plant peroxidases, animal peroxidases and catalases. Among all peroxidases, horseradish peroxidase (HRP) has received a special attention and will be the focus of this review. A brief description of the three super-families is included in the first section of this review. In the second section, a comprehensive description of the present state of knowledge of the structure and catalytic action of HRP is presented. The physiological role of peroxidases in higher plants is described in the third section. And finally, the fourth section addresses the applications of peroxidases, especially HRP, in the environmental and health care sectors, and in the pharmaceutical, chemical and biotechnological industries.