Selective oxidation of phenol and anisole derivatives to quinones with hydrogen peroxide and polymer-supported methylrhenium trioxide systems

Toward Selective Oxidation of Contaminants in Aqueous Systems

The presence of diverse pollutants in water has been threating human health and aquatic ecosystems on a global scale. For more than a century, chemical oxidation using strongly oxidizing species was one of the most effective technologies to destruct pollutants and to ensure a safe and clean water supply. However, the removal of increasing amount of pollutants with higher structural complexity, especially the emerging micropollutants with trace concentrations in the complicated water matrix, requires excessive dosage of oxidant and/or energy input, resulting in a low cost-effectiveness and possible secondary pollution. Consequently, it is of practical significance but scientifically challenging to achieve selective oxidation of pollutants of interest for water decontamination. Currently, there are a variety of examples concerning selective oxidation of pollutants in aqueous systems. However, a systematic understanding of the relationship between the origin of selectivity and its applicable water treatment scenarios, as well as the rational design of catalyst for selective catalytic oxidation, is still lacking. In this critical review, we summarize the state-of-the-art selective oxidation strategies in water decontamination and probe the origins of selectivity, that is, the selectivity resulting from the reactivity of either oxidants or target pollutants, the selectivity arising from the accessibility of pollutants to oxidants via adsorption and size exclusion, as well as the selectivity due to the interfacial electron transfer process and enzymatic oxidation. Finally, the challenges and perspectives are briefly outlined to stimulate future discussion and interest on selective oxidation for water decontamination, particularly toward application in real scenarios.

CO2 Chemisorption Behavior of Coordination-Derived Phenolate Sorbents

CO₂ chemisorption via C-O bond formation is an efficient methodology in carbon capture especially using phenolate-based ionic liquids (ILs) as the sorbents to afford carbonate products. However, most of the current IL systems involve alkylphosphonium cations, leading to side reactions via the ylide intermediate pathway. It is important to figure out the CO₂ chemisorption behavior of phenolate-derived sorbents using inactive and easily accessible cation counterparts without active protons. Herein, phenolate-based systems were constructed via coordination between alkali metal cations with crown ethers to avoid the participation of active protons in CO₂ chemisorption. Reaction pathway study revealed that CO₂ uptake could be achieved by O-C bond formation to afford carbonate. CO₂ uptake capacity and reaction enthalpy were significantly influenced by the coordination effect, alkali metal types, and alkyl groups on the benzene ring.

In situ electro-organic synthesis of hydroquinone using anisole on MWCNT/Nafion modified electrode surface and its heterogeneous electrocatalytic reduction of toxic Cr(vi) species

Owing to its electro-inactive character, anisole (phenylmethyl ether, PhOCH3) and its related derivatives have been used as electrolytes in electrochemistry. Herein, we report a simple one-step electro-organic conversion of PhOCH3 to hydroquinone (HQ) on a pristine-MWCNT-Nafion modified electrode glassy carbon electrode surface, GCE/Nf-MWCNT@HQ, in pH 2 KCl-HCl solution within 15 min of working time. The chemically modified electrode showed a highly redox-active and well-defined signal at an apparent standard electrode potential, E o' = 0.45 V vs. Ag/AgCl (A2/C2) with a surface excess value, Γ HQ = 2.1 × 10-9 mol cm-2. The formation of surface-confined HQ is confirmed by collective physicochemical and spectroscopic characterizations using TEM, UV-Vis, Raman, FTIR, NMR and GC-MS techniques and with several control experiments. Consent about the mechanism, the 2.1% of intrinsic iron present in the pristine-MWCNT is involved for specific complexation with oxygen donor organic molecule (PhOCH3) and hydroxylation in presence of H2O2 (nucleophilic attack) for HQ-product formation. The GCE/Nf-MWCNT@HQ showed an excellent heterogeneous-electrocatalytic reduction of Cr(vi) species in acidic solution with a linear calibration plot in a range, 5-500 ppm at an applied potential, 0.4 V vs. Ag/AgCl with a detection limit, 230 ppb (S/N = 3; amperometric i-t). As a proof of concept, selective detection of toxic Cr(vi) content in the tannery-waste water has been demonstrated with a recovery value ∼100%.

Dendrimer crown-ether tethered multi-wall carbon nanotubes support methyltrioxorhenium in the selective oxidation of olefins to epoxides

Benzo-15-crown-5 ether supported on multi-wall carbon nanotubes (MWCNTs) by tethered poly(amidoamine) (PAMAM) dendrimers efficiently coordinated methyltrioxorhenium in the selective oxidation of olefins to epoxides.

Solid State Oxidation of Phenols to Quinones with Ammonium Persulfate/Wet SiO2

A solid state method for the oxidation of phenols to quinones is described using ammonium persulfate/wet silica gel as oxidant

P4VP-RuII(bda) polyelectrolyte-metal complex as water oxidation catalyst: on the unique slow-diffusion and multi-charge effects of the polyelectrolyte ligand

In this work, we analyze the catalytic mechanism of P4VP–Ru^II(bda) polyelectrolyte–metal complex (PMC) as a water oxidation catalyst and elucidate how the unique slow diffusion and multi-charge properties of the polyelectrolyte ligand dominate the catalytic process. Four poly(4-vinyl pyridine)–Ru(bda) (P4VP–Ru) PMCs with different chain lengths and controlled Ru loading amounts were prepared and used as catalysts for catalytic water oxidation. These catalysts present excellent catalytic performance with turnover numbers (TON) from ∼1200 to ∼1700 because of the good hydration properties. Surprisingly, the combined catalysis kinetics and kinetic isotope effect (KIE) studies for P4VP–Ru PMCs confirm the single-site water nucleophilic attack (WNA) mechanism in catalysis, rather than the interaction between two metal oxide units (I2M). A combination of dynamic light scattering characterization, zeta-potential measurement and molecular dynamics simulation reveals that the slow diffusion and multi-charge properties of the polyelectrolyte ligand are responsible for the observed mechanism difference between the P4VP–Ru PMC system and small-molecule multi-nuclear system, though the two systems actually own a similar structural feature (flexible linkages between Ru centers). Our experimental and simulation results highlight the fact that though the existence of flexible linkages between Ru centers could provide large conformation entropy for the occurrence of Ru-dimerization in small-molecule and neutral polymer systems, the entropy elasticity could not overcome the electrostatic interaction energy in the PMC system. Clearly, this work unambiguously clarified why both intra-chain and inter-chain Ru-dimerization (I2M) are prohibited for the PMC system from a perspective of macromolecular chemistry and physics.

This work shows how the unique slow diffusion and multi-charge properties of the polyelectrolyte ligand dominate the catalytic mechanism for water oxidation catalysts.

Oxidative nucleophilic substitution selectively produces cambinol derivatives with antiproliferative activity on bladder cancer cell lines

Methyltrioxorhenium mediated oxidative addition/elimination nucleophilic substitution yielded alkylamino and arylamino cambinol derivatives characterized by anti-proliferative activity against wild-type and p53 mutated MGH-U1 and RT112 bladder cancer cell lines. Some of the novel compounds showed an activity higher than that of the lead compound. The reaction was highly regioselective, affording for the first time a panel of C-2 cambinol substitution products. Aliphatic primary and secondary amines, and primary aromatic amines, were used as nitrogen centered nucleophiles. Surprisingly, the antiproliferative activity of C-2 substituted cambinol derivatives was not correlated to the induction of p53 protein, as evaluated by the analysis of the cell viability on wild-type and p53 mutated cancer cell lines, and further confirmed by western blot analyses. These data suggest that they exert their antiproliferative activity by a mechanism completely different from cambinol.

Structure-Based Identification of HIV-1 Nucleocapsid Protein Inhibitors Active against Wild-Type and Drug-Resistant HIV-1 Strains

HIV/AIDS is still one of the leading causes of death worldwide. Current drugs that target the canonical steps of the HIV-1 life cycle are efficient in blocking viral replication but are unable to eradicate HIV-1 from infected patients. Moreover, drug resistance (DR) is often associated with the clinical use of these molecules, thus raising the need for novel drug candidates as well as novel putative drug targets. In this respect, pharmacological inhibition of the highly conserved and multifunctional nucleocapsid protein (NC) of HIV-1 is considered a promising alternative to current drugs, particularly to overcome DR. Here, using a multidisciplinary approach combining in silico screening, fluorescence-based molecular assays, and cellular antiviral assays, we identified nordihydroguaiaretic acid (6), as a novel natural product inhibitor of NC. By using NMR, mass spectrometry, fluorescence spectroscopy, and molecular modeling, 6 was found to act through a dual mechanism of action never highlighted before for NC inhibitors (NCIs). First, the molecule recognizes and binds NC noncovalently, which results in the inhibition of the nucleic acid chaperone properties of NC. In a second step, chemical oxidation of 6 induces a potent chemical inactivation of the protein. Overall, 6 inhibits NC and the replication of wild-type and drug-resistant HIV-1 strains in the low micromolar range with moderate cytotoxicity that makes it a profitable tool compound as well as a good starting point for the development of pharmacologically relevant NCIs.

Two ruthenium complexes capable of storing multiple electrons on a single ligand – photophysical, photochemical and electrochemical properties of [Ru(phen)2(TAPHAT)]2+ and [Ru(phen)2(TAPHAT)Ru(phen)2]4+

The photophysical, photochemical and electrochemical properties of two newly synthesized ruthenium(ii) complexes are reported.

Catalytic oxidation of biorefinery lignin to value-added chemicals to support sustainable biofuel production

Transforming plant biomass to biofuel is one of the few solutions that can truly sustain mankind's long-term needs for liquid transportation fuel with minimized environmental impact. However, despite decades of effort, commercial development of biomass-to-biofuel conversion processes is still not an economically viable proposition. Identifying value-added co-products along with the production of biofuel provides a key solution to overcoming this economic barrier. Lignin is the second most abundant component next to cellulose in almost all plant biomass; the emerging biomass refinery industry will inevitably generate an enormous amount of lignin. Development of selective biorefinery lignin-to-bioproducts conversion processes will play a pivotal role in significantly improving the economic feasibility and sustainability of biofuel production from renewable biomass. The urgency and importance of this endeavor has been increasingly recognized in the last few years. This paper reviews state-of-the-art oxidative lignin depolymerization chemistries employed in the papermaking process and oxidative catalysts that can be applied to biorefinery lignin to produce platform chemicals including phenolic compounds, dicarboxylic acids, and quinones in high selectivity and yield. The potential synergies of integrating new catalysts with commercial delignification chemistries are discussed. We hope the information will build on the existing body of knowledge to provide new insights towards developing practical and commercially viable lignin conversion technologies, enabling sustainable biofuel production from lignocellulosic biomass to be competitive with fossil fuel.

Selective hydroxylation of benzene derivatives and alkanes with hydrogen peroxide catalysed by a manganese complex incorporated into mesoporous silica–alumina

Selective hydroxylation of benzene to phenol with hydrogen peroxide was efficiently catalysed by a manganese complex incorporated into mesoporous silica–alumina.

Oxidation of phenol by hydrogen peroxide catalyzed by metal-containing poly(amidoxime) grafted starch

Polyamidoxime chelating resin was obtained from polyacrylonitrile (PAN) grafted starch. The nitrile groups of the starch-grafted polyacrylonitrile (St-g-PAN) were converted into amidoximes by reaction with hydroxylamine under basic conditions. The synthesized graft copolymer and polyamidoxime were characterized by FTIR, TGA and elemental microanalysis. Metal chelation of the polyamidoxime resin with iron, copper and zinc has been studied. The produced metal-polyamidoxime polymer complexes were used as catalysts for the oxidation of phenol using H(2)O(2) as oxidizing agent. The oxidation of phenol depends on the central metal ion present in the polyamidoxime complex. Reuse of M-polyamidoxime catalyst/H(2)O(2) system showed a slight decrease in catalytic activities for all M-polyamidoxime catalysts.

Larvicidal activity of para-benzoquinones

Plant products may be alternative sources of mosquito larval control agents, since they constitute a rich source of bioactive compounds that are biodegradable into nontoxic products. It has been reported that quinones and derivatives present toxic activity against mosquito larvae Aedes aegypti. Therefore, these facts led us to investigate the larvicidal potential of six structurally related para-benzoquinones against A. aegypti L. (Culicidae) larvae, the vector of dengue fever. All the para-benzoquinones were found to have larvicidal effect. The unsubstituted para-benzoquinone was the compound that exhibited the lowest potency, while 2-isopropyl-para-benzoquinone was the most bioactive. In general, the presence of alkyl groups results in more potent compounds. In addition, the number, position, and size of these groups modulate the potency of the compounds. The experimental results showed that by appropriate structural modification of para-benzoquinones, it may be possible to develop novel insecticidal compounds with potential use to control A. aegypti population.

Immobilized methyltrioxo rhenium (MTO)/H2O2 systems for the oxidation of lignin and lignin model compounds

A convenient and efficient application of heterogeneous methylrhenium trioxide (MTO) systems for the selective oxidation of lignin model compounds and lignins is reported. Environmental friendly and low-cost H2O2 was used as the oxygen atom donor. Overall, the data presented and discussed in this paper point toward the conclusion that the immobilized heterogeneous catalytic systems based on H2O2/and MTO catalysts are able to extensively oxidize both phenolic and non-phenolic, monomeric, and dimeric, lignin model compounds. Condensed diphenylmethane models were found also extensively oxidized. Technical lignins, such as hydrolytic sugar cane lignin (SCL) and red spruce kraft lignin (RSL), displayed oxidative activity with immobilized MTO catalytic systems. After oxidation, these lignins displayed the formation of more soluble lignin fragments with a high degree of degradation as indicated by the lower contents of aliphatic and condensed OH groups, and the higher amounts of carboxylic acid moieties. Our data indicate that immobilized MTO catalytic systems are significant potential candidates for the development of alternative totally chlorine-free delignification processes and environmental sustainable lignin selective modification reactions.