Pitfalls in the synthesis and biological evaluation of sialyl-LewisX mimetics as potential selectin antagonists

Synthesis of multivalent carbohydrate mimetics with aminopolyol end groups and their evaluation as L-selectin inhibitors

In this article a series of divalent and trivalent carbohydrate mimetics on the basis of an enantiopure aminopyran and of serinol is described. These aminopolyols are connected by amide bonds to carboxylic acid derived spacer units either by Schotten-Baumann acylation or by coupling employing HATU as reagent. The O-sulfation employing the SO3·DMF complex was optimized. It was crucial to follow this process by 700 MHz (1)H NMR spectroscopy to ensure full conversion and to use a refined neutralization and purification protocol. Many of the compounds could not be tested as L-selectin inhibitor by SPR due to their insolubility in water, nevertheless, a divalent and a trivalent amide showed surprisingly good activities with IC50 values in the low micromolar range.

Chemoenzymatic synthesis of functional sialyl Lewis(x) mimetics with a heteroaromatic core

Functional mimetics of the sialyl Lewis(X) tetrasaccharide were prepared by the enzymatic sialylation of a 1,3-diglycosylated indole and a glycosyl azide, which was subsequently transformed into a 1,4-diglycosylated 1,2,3-triazole, by using the trans-sialidase of Trypanosoma cruzi. These compounds inhibited the binding of E-, L-, and P-selectin-coated nanoparticles to polyacrylamide-bound sialyl-Lewis(X) -containing neighboring sulfated tyrosine residues (sTyr/sLe(X) -PAA) at low or sub-millimolar concentrations. Except for E-selectin, the mimetics showed higher activities than the natural tetrasaccharide.

The repertoire of glycan determinants in the human glycome

The number of glycan determinants that comprise the human glycome is not known. This uncertainty arises from limited knowledge of the total number of distinct glycans and glycan structures in the human glycome, as well as limited information about the glycan determinants recognized by glycan-binding proteins (GBPs), which include lectins, receptors, toxins, microbial adhesins, antibodies, and enzymes. Available evidence indicates that GBP binding sites may accommodate glycan determinants made up of 2 to 6 linear monosaccharides, together with their potential side chains containing other sugars and modifications, such as sulfation, phosphorylation, and acetylation. Glycosaminoglycans, including heparin and heparan sulfate, comprise repeating disaccharide motifs, where a linear sequence of 5 to 6 monosaccharides may be required for recognition. Based on our current knowledge of the composition of the glycome and the size of GBP binding sites, glycoproteins and glycolipids may contain approximately 3000 glycan determinants with an additional approximately 4000 theoretical pentasaccharide sequences in glycosaminoglycans. These numbers provide an achievable target for new chemical and/or enzymatic syntheses, and raise new challenges for defining the total glycome and the determinants recognized by GBPs.

From carbohydrate leads to glycomimetic drugs

Carbohydrates are the most abundant natural products. Besides their role in metabolism and as structural building blocks, they are fundamental constituents of every cell surface, where they are involved in vital cellular recognition processes. Carbohydrates are a relatively untapped source of new drugs and therefore offer exciting new therapeutic opportunities. Advances in the functional understanding of carbohydrate-protein interactions have enabled the development of a new class of small-molecule drugs, known as glycomimetics. These compounds mimic the bioactive function of carbohydrates and address the drawbacks of carbohydrate leads, namely their low activity and insufficient drug-like properties. Here, we examine examples of approved carbohydrate-derived drugs, discuss the potential of carbohydrate-binding proteins as new drug targets (focusing on the lectin families) and consider ways to overcome the challenges of developing this unique class of novel therapeutics.

Is adamantane a suitable substituent to pre-organize the acid orientation in E-selectin antagonists?

The selectins play a key role in the inflammatory process, that is, the recruitment of leukocytes from blood vessels into inflamed tissue. Because excessive infiltration of leukocytes can induce acute or chronic reactions, the control of leukocyte extravasation is of great pharmaceutical interest. All physiological ligands of the selectins contain the tetrasaccharide epitope sialyl Lewis(x), which therefore became the lead structure in selectin antagonist research. Previous studies indicated that an important factor for the affinity of sLe(x) is the fact that in solution its pharmacophores are already conformationally pre-organized in the bioactive orientation. In mimics where the GlcNAc- and the NeuNAc-moieties of sLe(x) were replaced by (R,R)-cyclohexane-1,2-diol and (S)-cyclohexyllactic acid, respectively, an optimized pre-organization of the pharmacophores could be realized, leading to antagonists with improved affinities. To further optimize the pre-organization of the carboxylic acid, a pharmacophore essential for binding, the replacement of NeuNAc by bulky (R)- and (S)-adamantyl-lactic acid was studied. Although antagonist (S)-7 showed a slightly reduced affinity, the expected beneficial effect of the (S)-configuration at C-2 of the lactate could be confirmed.

P-selectin blocking potency of multimeric tyrosine sulfates in vitro and in vivo

P-selectin blocking potency was investigated using synthetic monomeric and polymeric anionic compounds containing sulfate groups such as O-sulfotyrosine (sTyr) and/or sulfated Lewis structures. A non-carbohydrate-containing polyacrylamide conjugate sTyr-PAA (80% mol of sTyr) was a remarkably potent inhibitor of P-selectin binding in vitro, having an IC(50) value of 6 ng/mL (equivalent to 10 nM calculated on the basis of sTyr residues or 0.1 nM calculated by the mass of the macromolecule). The inhibitory effect of sTyr-PAA (80%) towards P-selectin is significantly greater than that of fucoidan (IC(50), 100 ng/mL). However, sTyr-PAA (80%) was less effective than fucoidan at reducing neutrophil extravasation in an in vivo rat model of peritonitis.

Design and synthesis of sialyl Lewis(x) mimics as E- and P-selectin inhibitors

The selectins are a family of cell-adhesion proteins that mediate the rolling of leukocytes on activated endothelial cells through the recognition of the carbohydrate epitope sialyl Lewis(x) (sLe(x)). Control of the leukocyte-endothelial cell adhesion process may prove useful in cases where excess recruitment of leukocytes can contribute to acute diseases such as stroke and reperfusion injury and chronic diseases such as psoriasis and rheumatoid arthritis. The development of molecules that block the interactions between sLe(x) and the selectins has become an active area of research. In this review, we will highlight the various approaches taken toward the development of sLe(x) mimetics as antagonists of E- and P-selectin, including the use of structural information about the selectins and their interactions with sLe(x) that have been revealed through the use of NMR, protein crystallography and molecular modeling.

Synthesis of a potent antagonist of E-selectin

A synthesis of an antagonist of E-selectin previously reported by a group at Novartis Pharma in Basel is described. An important feature involves the formation of an ether linkage based on a Rh(II)-catalyzed reaction. Stereocontrolled glycosylations rely on the anomeric activation of 2-pyridylthio carbonate as leaving group for the attachment of beta-D-galactopyranosyl and alpha-L-fucopyranosyl units on a common 1,5-anhydro D-glucitol scaffold.

Novel mimics of sialyl Lewis X: design, synthesis and biological activity of a series of 2- and 3-malonate substituted galactoconjugates

A series of potent inhibitors of P-selectin as potential anti-inflammatory agents is reported. These compounds are derivatives of galactocerebrosides bearing a malonate side chain in positions 2 and 3 of the galactose moiety. Based on the binding mode of sialyl Lewis X, the two acidic groups of the malonate are designed to form ionic interactions with two important lysines in the active site of P-selectin, Lys113 and Lys111. On the other hand, the 4- and 6-hydroxy groups on the galactose ring are arranged to chelate the calcium ion in the P-selectin active site. The synthesis and the biological activity of this series of compounds are described. Lead compounds having a greater potency than sialyl Lewis X are identified.

Polymerized Liposome Assemblies: Bifunctional Macromolecular Selectin Inhibitors Mimicking Physiological Selectin Ligands

Monomeric sialyl Lewis(X) (sLe(x)) and sLe(x)-like oligosaccharides are minimal structures capable of supporting selectin binding in vitro. However, their weak binding interactions do not correlate with the high-affinity binding interactions witnessed in vivo. The polyvalent display of carbohydrate groups found on cell surface glycoprotein structures may contribute to the enhanced binding strength of selectin-mediated adhesion. Detailed biochemical analyses of physiological selectin ligands have revealed a complicated composition of molecules that bind to the selectins in vivo and suggest that there are other requirements for tight binding beyond simple carbohydrate multimerization. In an effort to mimic the high-affinity binding, polyvalent scaffolds that contain multicomponent displays of selectin-binding ligands have been synthesized. Here, we demonstrate that the presentation of additional anionic functional groups in the form of sulfate esters, on a polymerized liposome surface containing a multimeric array of sLe(x)-like oligosaccharides, generates a highly potent, bifunctional macromolecular assembly. This assembly inhibits L-, E-, and P-selectin binding to GlyCAM-1, a physiological ligand better than sLe(x)-like liposomes without additional anionic charge. These multivalent arrays are 4 orders of magnitude better than the monovalent carbohydrate. Liposomes displaying 3'-sulfo Lewis(X)-like oligosaccharides, on the other hand, show slight loss of binding with introduction of additional anionic functional groups for E- and P-selectin and negligible change for L-selectin. The ability to rapidly and systematically vary the composition of these assemblies is a distinguishing feature of this methodology and may be applied to the study of other systems where composite binding determinants are important for high-affinity binding.

Glycosyltransferase catalyzed assemblage of sialyl-Lewis(a)-saccharopeptides

A series of methyl hexopyranosiduronic acids are coupled to type I disaccharide amines to give 'trisaccharides' which have the natural N-acetyl group of the type I disaccharides replaced by uronic acids (-->saccharopeptides). These saccharopeptides are surprisingly good substrates for alpha-2,3,-sialyltransferase and fucosyltransferase III. The enzymes transfer N-acetylneuraminic acid and fucose, respectively, onto these acceptor substrates, despite the far reaching alterations, regio- and stereospecifically in the expected manner to yield sialyl-Lewis(a)-saccharopeptides.