A method for the one-pot regioselective formation of the two disulfide bonds of α-conotoxin SI

Distinct 3-disulfide-bonded isomers of tridegin differentially inhibit coagulation factor XIIIa: The influence of structural stability on bioactivity

Tridegin is a 66mer cysteine-rich coagulation factor XIIIa (FXI-IIa) inhibitor from the giant amazon leech Haementeria ghilianii of yet unknown disulfide connectivity. This study covers the structural and functional characterization of five different 3-disulfide-bonded tridegin isomers. In addition to three previously identified isomers, one isomer containing the inhibitory cystine knot (ICK, knottin) motif, and one isomer with the leech antihemostatic protein (LAP) motif were synthesized in a regioselective manner. A fluorogenic enzyme activity assay revealed a positive correlation between the constriction of conformational flexibility in the N-terminal part of the peptide and the inhibitory potential towards FXI-IIa with clear differences between the isomers. This observation was supported by molecular dynamics (MD) simulations and subsequent molecular docking studies. The presented results provide detailed structure-activity relationship studies of different tridegin disulfide isomers towards FXI-IIa and reveal insights into the possibly existing native linkage compared to non-native disulfide tridegin species.

Stepwise Construction of Disulfides in Peptides

The disulfide bond plays an important role in biological systems. It defines global conformation, and ultimately the biological activity and stability of the peptide or protein. It is frequently present, singly or multiply, in biologically important peptide hormones and toxins. Numerous disulfide-containing peptides have been approved by the regulatory agencies as marketed drugs. Chemical synthesis is one of the prerequisite tools needed to gain deep insights into the structure-function relationships of these biomolecules. Along with the development of solid-phase peptide synthesis, a number of methods of disulfide construction have been established. This minireview will focus on the regiospecific, stepwise construction of multiple disulfides used in the chemical synthesis of peptides. We intend for this article to serve a reference for peptide chemists conducting complex peptide syntheses and also hope to stimulate the future development of disulfide methodologies.

Folding of conotoxins: formation of the native disulfide bridges during chemical synthesis and biosynthesis of Conus peptides

Conopeptides from >700 species of predatory marine Conus snails provide an impressive molecular diversity of cysteine-rich peptides. Most of the estimated 50,000-100,000 distinct conopeptides range in size from 10 to 50 amino acid residues, often with multiple posttranslational modifications. The great majority contain from two to four disulfide bridges. As the biosynthetic and chemical production of this impressive repertoire of disulfide-rich peptides has been investigated, particularly the formation of native disulfide bridges, differences between in vivo and in vitro oxidative folding have become increasingly evident. In this article, we provide an overview of the molecular diversity of conotoxins with an emphasis on the cysteine patterns and disulfide frameworks. The conotoxin folding studies reviewed include regioselective and direct oxidation strategies, recombinant expression, optimization of folding methods, mechanisms of in vitro folding, and preliminary data on the biosynthesis of conotoxins in venom ducts. Despite these studies, how the cone snails efficiently produce properly folded conotoxins remains unanswered. As chemists continue to master oxidative folding techniques, insights gleaned from how conotoxins are folded in vivo will likely lead to the development of the new folding methods, as well as shed some light on fundamental mechanisms relevant to the protein folding problem.

Synthesis of protected norcysteines for SPPS compatible with Fmoc-strategy

We report the synthesis of racemic Alloc-Ncy(Tmob)-OH, the resolution of its methyl ester, and demonstrate its application to form a norcystine bridge in octreotide-amide using the Fmoc-strategy on solid phase. N-Alloc and S-Tmob protections of norcysteine (Ncy) were found to be a preferred choice for Fmoc-strategy over three other protected norcysteines synthesized i.e. Fmoc-Ncy(tBu)-OH, Alloc-Ncy(tBu)-OH and Alloc-Ncy(Trt)-OH.

Catalysis of protein disulfide bond isomerization in a homogeneous substrate

Protein disulfide isomerase (PDI) catalyzes the rearrangement of nonnative disulfide bonds in the endoplasmic reticulum of eukaryotic cells, a process that often limits the rate at which polypeptide chains fold into a native protein conformation. The mechanism of the reaction catalyzed by PDI is unclear. In assays involving protein substrates, the reaction appears to involve the complete reduction of some or all of its nonnative disulfide bonds followed by oxidation of the resulting dithiols. The substrates in these assays are, however, heterogeneous, which complicates mechanistic analyses. Here, we report the first analysis of disulfide bond isomerization in a homogeneous substrate. Our substrate is based on tachyplesin I, a 17-mer peptide that folds into a beta hairpin stabilized by two disulfide bonds. We describe the chemical synthesis of a variant of tachyplesin I in which its two disulfide bonds are in a nonnative state and side chains near its N and C terminus contain a fluorescence donor (tryptophan) and acceptor (N(epsilon)-dansyllysine). Fluorescence resonance energy transfer from 280 to 465 nm increases by 28-fold upon isomerization of the disulfide bonds into their native state (which has a lower E(o') = -0.313 V than does PDI). We use this continuous assay to analyze catalysis by wild-type human PDI and a variant in which the C-terminal cysteine residue within each Cys-Gly-His-Cys active site is replaced with alanine. We find that wild-type PDI catalyzes the isomerization of the substrate with kcat/K(M) = 1.7 x 10(5) M(-1) s(-1), which is the largest value yet reported for catalysis of disulfide bond isomerization. The variant, which is a poor catalyst of disulfide bond reduction and dithiol oxidation, retains virtually all of the activity of wild-type PDI in catalysis of disulfide bond isomerization. Thus, the C-terminal cysteine residues play an insignificant role in the isomerization of the disulfide bonds in nonnative tachyplesin I. We conclude that catalysis of disulfide bond isomerization by PDI does not necessarily involve a cycle of substrate reduction/oxidation.

Engineering disulfide bonds of the novel human beta-defensins hBD-27 and hBD-28: differences in disulfide formation and biological activity among human beta-defensins

Human beta-defensins comprise a large number of peptides that play a functional role in the innate and adaptive immune system. Recently, clusters of new beta-defensin genes with predominant expression in testicular tissue have been discovered on different chromosomes by bioinformatics. beta-Defensins share a common pattern of three disulfides that are essential for their biological effects. Here we report for the first time the chemical synthesis of the new fully disulfide-bonded beta-defensins hBD-27 and hBD-28, and compare the results with synthetic procedures to obtain the known hBD-2 and hBD-3. While hBD-27 was readily converted into a product with the desired disulfide pattern by oxidative folding, hBD-28 required a selective protective group strategy to introduce the three disulfide bonds. The established synthetic processes were applied to the synthesis of hBD-2, which, like hBD-27, was accessible by oxidative folding, whereas hBD-3 required a selective strategy comparable to hBD-28. Experimental work demonstrated that trityl, acetamidomethyl, and t-butyl are superior to other protection strategies. However, the suitable pairwise arrangement of the protective groups can be different, as shown here for hBD-3 and hBD-28. Determination of the minimum inhibitory concentration against different bacteria revealed that hBD-27, in contrast to other beta-defensins tested, has virtually no antimicrobial activity. Compared to the other peptides tested, hBD-27 showed almost no cytotoxic activity, measured by hemoglobin release of erythrocytes. This might be due to the low positive net charge, which is significantly higher for hBD-2, hBD-3, and hBD-28.

Physico-chemical characterization and synthesis of neuronally active alpha-conotoxins

The high specificity of alpha-conotoxins for different neuronal nicotinic acetylcholine receptors makes them important probes for dissecting receptor subtype selectivity. New sequences continue to expand the diversity and utility of the pool of available alpha-conotoxins. Their identification and characterization depend on a suite of techniques with increasing emphasis on mass spectrometry and microscale chromatography, which have benefited from recent advances in resolution and capability. Rigorous physico-chemical analysis together with synthetic peptide chemistry is a prerequisite for detailed conformational analysis and to provide sufficient quantities of alpha-conotoxins for activity assessment and structure-activity relationship studies.

Regioselective formation, using orthogonal cysteine protection, of an alpha-conotoxin dimer peptide containing four disulfide bonds

[structure: see text] The combination of the cysteine thiol protecting groups Trt, Acm, tBu, and MeBzl were used for the regioselective formation of an alpha-conotoxin dimer peptide containing four disulfide bridges. Additionally, a protocol is described whereby two one-pot oxidations were employed in order to improve the efficiency of the folding process. The target compound was produced in good yield.

A novel approach to the synthesis of EGF-like domains: a method for the one-pot regioselective formation of the three disulfide bonds of a human blood coagulation factor VII EGF-1 analogue

The study of EGF-like domains is of great general interest in protein science because of their participation in a multitude of protein-protein interactions. A common structural feature of EGF-like modules is the presence of three disulfide bonds, the regioselective formation of which still remains a challenge to peptide chemists. We report here on a method for the one-pot regioselective synthesis of an analogue of the EGF-1 domain of human coagulation Factor VII (residues 45-83) comprising an Asn57beta-Asp substitution. The cysteine protecting groups trityl, t-butyl and acetamidomethyl were chosen for the three disulfide bond pairings. All three disulfide bridges were prepared directly from the crude starting product, obviating the need for the timely and costly purification of the intermediate folded products. The fully folded product was purified by preparative high-pressure liquid chromatography prior to evaluation of its biological activity in an assay to detect inhibition of FVII/TF complex formation. In addition circular dichroism spectroscopy was employed to elucidate the main structural similarities between this peptide analogue and the native human Factor VII EGF-1 domain.