1.3-Cycloadditionen von azomethin-yliden aus aziridin-carbonestern

Green Light Promoted Iridium(III)/Copper(I)-Catalyzed Addition of Alkynes to Aziridinoquinoxalines Through the Intermediacy of Azomethine Ylides

This manuscript describes the development of alkyne addition to the aziridine moiety of aziridinoquinoxalines using dual Ir(III)/Cu(I) catalytic system under green light-emitting diode (LED) photolysis (λmax =525 nm). This mild method features high levels of chemo- and regioselectivity and was used to generate 30 highly functionalized substituted dihydroquinoxalines in 36-98 % yield. This transformation was also carried asymmetrically using phthalazinamine-based chiral ligand to provide 9 chiral addition products in 96 : 4 to 86 : 14 e.r. The experimental and quantum chemical explorations of this reaction suggest a mechanism that involves Ir(III)-catalyzed triplet energy transfer followed by a ring-opening reaction ultimately leading to the formation of azomethine ylide intermediates. These azomethine intermediates undergo sequential protonation/copper(I) acetylide addition to provide the products.

Maximizing Step-Normalized Increases in Molecular Complexity: Formal [4+2+2+2] Photoinduced Cyclization Cascade to Access Polyheterocycles Possessing Privileged Substructures

A new complexity building photoinduced cascade which amounts to an unprecedented formal [4+2+2+2] cycloaddition topology is developed to access complex nitrogen polyheterocycles. This photocascade is initiated by the excited state intramolecular proton transfer (ESIPT) in aromatic amino ketones with tethered dual unsaturated pendants, i.e. pyrrole and alkenic moieties, resulting in the formation of four σ-bonds and setting six new stereogenic centers in a single experimentally simple photochemical step with up to 220 mcbit complexity increases.

General Pyrrolidine Synthesis via Iridium-Catalyzed Reductive Azomethine Ylide Generation from Tertiary Amides and Lactams

An iridium-catalyzed reductive generation of both stabilized and unstabilized azomethine ylides and their application to functionalized pyrrolidine synthesis via [3 + 2] dipolar cycloaddition reactions is described. Proceeding under mild reaction conditions from both amide and lactam precursors possessing a suitably positioned electron-withdrawing or a trimethylsilyl group, using 1 mol% Vaska’s complex [IrCl(CO)(PPh₃)₂] and tetramethyldisiloxane (TMDS) as a terminal reductant, a broad range of (un)stabilized azomethine ylides were accessible. Subsequent regio- and diastereoselective, inter- and intramolecular dipolar cycloaddition reactions with variously substituted electron-deficient alkenes enabled ready and efficient access to structurally complex pyrrolidine architectures. Density functional theory (DFT) calculations of the dipolar cycloaddition reactions uncovered an intimate balance between asynchronicity and interaction energies of transition structures, which ultimately control the unusual selectivities observed in certain cases.

The Huisgen Reaction: Milestones of the 1,3-Dipolar Cycloaddition

The concept of 1,3-dipolar cycloadditions was presented by Rolf Huisgen 60 years ago. Previously unknown reactive intermediates, for example azomethine ylides, were introduced to organic chemistry and the (3+2) cycloadditions of 1,3-dipoles to multiple-bond systems (Huisgen reaction) developed into one of the most versatile synthetic methods in heterocyclic chemistry. In this Review, we present the history of this research area, highlight important older reports, and describe the evolution and further development of the concept. The most important mechanistic and synthetic results are discussed. Quantum-mechanical calculations support the concerted mechanism always favored by R. Huisgen; however, in extreme cases intermediates may be involved. The impact of 1,3-dipolar cycloadditions on the click chemistry concept of K. B. Sharpless will also be discussed.

2-Azaallyl Anions, 2-Azaallyl Cations, 2-Azaallyl Radicals, and Azomethine Ylides

This review covers the use of 2-azaallyl anions, 2-azaallyl cations, and 2-azaallyl radicals in organic synthesis up through June 2018. Particular attention is paid to both foundational studies and recent advances over the past decade involving semistabilized and nonstabilized 2-azaallyl anions as key intermediates in various carbon-carbon and carbon-heteroatom bond-forming processes. Both transition-metal-catalyzed and transition-metal-free transformations are covered. Azomethine ylides, which have received significant attention elsewhere, are discussed briefly with the primary focus on critical comparisons with 2-azaallyl anions in regard to generation and use.

Construction of thiazines and oxathianes via [3 + 3] annulation of N-tosylaziridinedicarboxylates and oxiranes with 1,4-dithiane-2,5-diol: application towards the synthesis of bioactive molecules

Efficient construction of functionalized thiazine and oxathiane derivatives via [3 + 3] annulation of N-tosylaziridinedicarboxylates and oxiranes with in situ generated mercaptoaldehyde in the presence of a Lewis acid is described.

Studies on the formal [3 + 2] cycloaddition of aziridines with alkenes for the synthesis of 1-azaspiroalkanes

The Lewis acid-mediated [3 + 2] cycloaddition of N-sulfonyl- and N-sulfamoylaziridines with alkenes provides a rapid and efficient access to 1-azaspiro[4.n]alkanes. Experimental studies have been combined with DFT calculations to explore the mechanism of the reaction. They demonstrate that the nature of the electron-withdrawing nitrogen protecting group has a very limited influence on the course of the reaction and, particularly, on the initial formation of the 1,3-zwitterionic species through C-N bond cleavage, which has been found to be the rate-determining step. Compared to N-sulfonylaziridines, N-sulfamoylaziridines have proved to be more synthetically useful synthons that afford crystalline polycyclic structures in good yields. A short sequence of catalytic C(sp(3))-H amination-cyclization-[3 + 2] cycloaddition has then been successfully designed to afford the homologue 1-azaspiro[5.n]alkanes, thereby illustrating the higher versatility of sulfamates in these cycloadditions.

Synthesis of polysubstituted pyrroles via [3 + 2]-annulation of aziridines and β-nitroalkenes under aerobic conditions

Polysubstituted pyrroles are regioselectively synthesizedviathe copper acetate-catalyzed [3 + 2] annulation reaction of aziridines and nitroalkenes under aerobic conditions.

Enantioselective construction of pyrrolidines by palladium-catalyzed asymmetric [3 + 2] cycloaddition of trimethylenemethane with imines

A protocol for the enantioselective [3 + 2] cycloaddition of trimethylenemethane (TMM) with imines has been developed. Central to this effort were the novel phosphoramidite ligands developed in our laboratories. The conditions developed to effect an asymmetric TMM reaction using 2-trimethylsilylmethyl allyl acetate were shown to be tolerant of a wide variety of imine acceptors to provide the corresponding pyrrolidine cycloadducts with excellent yields and selectivities. Use of a bis-2-naphthyl phosphoramidite allowed the successful cycloaddition of the parent TMM with N-Boc imines, and has further permitted the reaction of substituted donors with N-tosyl aldimines and ketimines in high regio-, diastereo-, and enantioselectivity. Use of a diphenylazetidine ligand allows the complementary synthesis of the exocyclic nitrile product shown, and we demonstrate control of the regioselectivity of the product based on manipulation of the reaction parameters.

Lewis acid-catalyzed [3 + 2]cyclo-addition of alkynes with N-tosyl-aziridines via carbon-carbon bond cleavage: synthesis of highly substituted 3-pyrrolines

A novel, efficient, and highly regioselective Lewis acid-catalyzed [3 + 2] cycloaddition of alkynes with azomethine ylides, which are easily obtained from N-tosylaziridines via C-C bond heterolysis at room temperature was developed. Moderate enantioselectivity (70% ee) can be achieved by the application of the commercially available chiral Pybox 7 as the ligand.

Nickel(II)-catalyzed diastereoselective [3+2] cycloaddition of N-tosyl-aziridines and aldehydes via selective carbon-carbon bond cleavage

An efficient and mild Ni(ClO(4))(2)-catalyzed [3+2] cycloaddition of N-tosylaziridines and aldehydes via C-C bond cleavage was developed. The cycloaddition reaction proceeds with high diastereoselectivity and regioselectivity leading to highly substituted 1,3-oxazolidines. Notably, this novel reaction can be easily expanded to gram level scale and the thermal conditions cannot achieve the same transformation.

Lewis acid-catalyzed formal [3+2] cycloadditions of N-tosyl aziridines with electron-rich alkenes via selective carbon-carbon bond cleavage

A novel, mild, robust catalyst Y(OTf)(3) for C-C bond heterolysis of N-tosyl aziridines was developed and the resulting metallo-azomethine ylides may readily undergo [3+2] dipolar cycloaddition with an electron-rich olefin via a stepwise reaction pathway with high regio- and diastereoselectivity leading to substituted pyrrolidines.

A novel[2 + 3]cycloaddition reaction: singlet oxygen mediated formation of 1,3-dipole from iminodiacetic acid dimethyl ester and its addition to maleimides

Sensitized photolysis of iminodiacetic acid methyl ester and maleimides follows a [2 + 3] cycloaddition pathway yielding pyrrolidine derivatives. This is similar to the photochemical reaction between C(60) and amines. A series of pyrrolidine derivatives are prepared by the method including multipyrrolidines from bis- and tris-maleimide starting materials. The yields range from 13% to 85%. The reaction is highly stereoselective. All the isolated products have the 1,3-dimethoxycarbonyl groups in the cis configuration. Various sensitizers may be used with slightly different yields. A plausible mechanism is proposed that involves the singlet oxygen abstraction of two alpha hydrogen atoms from the iminodiacetate and formation of a 1,3-dipole with a structure similar to the classical thermally generated 1,3-dipole.

Fullerene-sensitized

[reaction: see text] Fullerene catalyzes the cycloaddition of dimethyliminodiacetate to maleimides under photolysis to form 2,5-dimethoxycarbonylpyrrolidine derivatives.