Enzyme production activity of Phanerochaete chrysosporium and degradation of pentachlorophenol in a bioreactor

Cascading Recycling of Wood Waste: A Review

Wood is an increasingly demanded renewable resource and an important raw material for construction and materials. In addition, new consumption habits are leading to the production of ever greater volumes of waste wood, which constitutes a feedstock that can be mobilized for the cascade production of new materials such as particleboard. However, current legislation and wood waste recycling processes need to be improved in order to maximize the volumes that can be reused and to upgrade the properties of the recycled wood. This review describes wood waste flows and volumes available in Europe, the current French and European legislation, and the innovations under development in this field: innovative automated sorting techniques, physical-chemical processes for cleaning residual glue from the surface of wood particles, cleaning of MDF, and bioremediation processes for cleaning hazardous wood contaminated by heavy metals or creosote.

4-chlorophenol removal by air lift packed bed bioreactor and its modeling by kinetics and numerical model (artificial neural network)

4-chlorophenol (4-CP) is a hazardous contaminant that is hardly removed by some technologies. This study investigated the biodegradation, and physical 4-CP removal by a mixed microbial consortium in the Airlift packed bed bioreactor (ALPBB) and modeling by an artificial neural network (ANN) for first the time. The removal efficiency of ALPBB was investigated at 4-CP(1-1000 mg/L) and hydraulic retention time (HRT)(6-96 hr) by HPLC. The results showed that removal efficiency decreased from 85 at 1 to 0.03% at 1000 mg/L, with increasing 4-CP concentration and HRT decreasing. BOD₅/COD increased with increasing exposure time and concentration decreasing, from 0.05 at 1000 to 0.96 at 1 mg/L. With time increasing, the correlation between COD and 4-CP removal increased (R² = 0.5, HRT = 96 h). There was a positive correlation between the removal of 4-CP and SCOD by curve fitting was R² = 0.93 and 0.96, respectively. Moreover, the kinetics of 4-CP removal follows the first-order and pseudo-first-order equation at 1 mg/L and other concentrations, respectively. 4-CP removal modeling has shown that the 2:3:1 and 2:4:1 were the best structures (MSE: physical = 0.126 and biological = 0.9)(R²_allphysical = 0.999 and R²_testphysical = 0.999) and (R²_allbiological = 0.71, and R²_testbiological = 0.997) for 4-CP removal. Also, the output obtained by the ANN prediction of 4-CP was correlated to the actual data (R²_physical = 0.9997 and R²_biological = 0.59). Based on the results, ALPBB with up-flow submerged aeration is a suitable option for the lower concentration of 4-CP, but it had less efficiency at high concentrations. So, physical removal of 4-CP was predominant in biological treatment. Therefore, the modification of this reactor for 4-CP removal is suggested at high concentrations.

Synergic effect of adsorption and biodegradation enhance cyanide removal by immobilized Alcaligenes sp. strain DN25

A high efficiency and stability polyurethane-foam (PUF)-immobilized cell system was constructed to remove cyanide based on simultaneous adsorption and biodegradation (SAB). The performance of the PUF-immobilized system was evaluated by comparison with the freely suspended cell system. The SAB system exhibited more effective and robust, and could still remain degradation activity even at 40 °C or pH 11.0. The SAB system completely removed 500 mg CN^-/L within 8 h at 30 °C, pH 8.0, and 120 rpm, whereas 12 h were required for the free cells system. Moreover, the SAB system showed apparent superiority in removing higher concentration cyanide up to 1200 mg CN^-/L. A continuously stirred tank bioreactor (CSTR) was successfully designed and steadily operated with approximately 85% of the total average removal efficiency for 52 days at an influent cyanide concentration of 100-200 mg/L, which demonstrated a favorable reliability. Cyanide removal process could be well described using a pseudo first-order model, and the higher apparent rate constants (k) of the immobilized cells showed the synergic effect of adsorption and biodegradation significantly enhanced cyanide removal. Preliminarily, it was found that the foam characteristic might play a not negligible role on the cyanide-degrading enzyme expression of strain DN25 in the SAB system.

Degradation of pentachlorophenol by potato polyphenol oxidase

In this study, polyphenol oxidase (PPO) was extracted from commercial potatoes. Degradation of pentachlorophenol by potato PPO was investigated. The experimental results show that potato PPO is more active in weak acid than in basic condition and that the optimum pH for the reaction is 5.0. The degradation of pentachlorophenol by potato PPO reaches a maximum at 298 K. After reaction for 1 h, the removal of both pentachlorophenol and total organic carbon is >70% with 6.0 units/mL potato PPO at pH 5.0 and 298 K. Pentachlorophenol can be degraded through dechlorination and ring-opening by potato PPO. The work demonstrates that pentachlorophenol can be effectively eliminated by crude potato PPO.

Pentachlorophenol sorption in nylon fiber and removal by immobilized Rhizopus oryzae ENHE

This study describes pentachlophenol (PCP) sorption in nylon fiber in which Rhizopus oryzae ENHE was immobilized to remove the chemical compound. The experimental sorption data were analyzed using the Langmuir, Freundlich, and Redlich-Peterson isotherm models using non-linear error functions to fit the experimental data to the three models. Results showed that the isotherm obtained from the data fitted the three models used. However, the g parameter from Redlich-Peterson model showed that the isotherm obtained approaches the Freundlich model. This support reached the sorption equilibrium concentration at 3mg PCPg(-1)nylon. To study PCP removal capability by R. oryzae ENHE and to eliminate the error caused by PCP sorbed by the nylon fiber during its quantification, nylon fiber at PCP equilibrium sorption concentration was used to immobilize R. oryzae ENHE. It was found that this fungus grew within nylon fiber cubes in presence or not of PCP, even when PCP caused growth inhibition. Maximum biomass accumulated into nylon cubes without PCP was of 32 mg biomass g(-1)nylon and into nylon cubes at PCP equilibrium concentration was of 18 mg g(-1)nylon. The results showed that R. oryzae ENHE immobilized into nylon fiber removed 88.6% and 92% of PCP in cultures with 12.5 and 25 mg PCPL(-1), as initial concentration, respectively. This is the first work to report that a zygomycete, such as R. oryzae ENHE, immobilized into nylon fiber kept its potential to remove PCP.

FUNGOS NA BIORREMEDIAÇÃO DE ÁREAS DEGRADADAS

RESUMO O aumento das atividades industriais tem intensificado a poluição ambiental, promovendo a disposição inadequada de resíduos domésticos e industriais, principalmente resíduos perniciosos, implicando na contaminação do solo, ar, recursos hídricos superficiais e subterrâneos. Dentre as tecnologias mais utilizadas na recuperação dessas áreas degradadas, destaca-se a biorremediação, que tem, como agentes recuperadores, os micro-organismos. Portanto, o presente trabalho de revisão tem por objetivo abordar os principais aspectos da biorremediação por fungos – micorremediação de solos contaminados baseados nas diversas pesquisas já publicadas e disponíveis nos principais bancos de dados, tais como SciELO, LILACS, HighWire e PubMed. Essa biotecnologia vem sendo utilizada há vários anos em outros países e, em certos casos, apresenta menor custo e maior eficiência na remoção dos contaminantes do que as técnicas físicas e químicas que são atualmente utilizadas em escala comercial no tratamento de diversos resíduos e na remediação de áreas degradadas. Diante disso, é necessário que sejam realizados mais estudos para compreender os mecanismos de biorremediação mediada por micro-organismos, como ferramenta biológica no combate a poluição.

Production of Ligninolytic Enzymes by White-Rot FungusDatroniasp. KAPI0039 and Their Application for Reactive Dye Removal

This study focused on decolorization of 2 reactive dyes; Reactive Blue 19 (RBBR) and Reactive Black 5 (RB5), by selected white-rot fungusDatroniasp. KAPI0039. The effects of reactive dye concentration, fungal inoculum size as well as pH were studied. Samples were periodically collected for the measurement of color unit, Laccase (Lac), Manganese Peroxidase (MnP), and Lignin Peroxidase (LiP) activity. Eighty-six percent of 1,000 mg L−1RBBR decolorization was achieved by 2% (w/v)Datroniasp. KAPI0039 at pH 5. The highest Lac activity (759.81 UL−1) was detected in the optimal condition. For RB5,Datroniasp. KAPI0039 efficiently performed (88.01% decolorization) at 2% (w/v) fungal inoculum size for the reduction of 600 mg L−1RB5 under pH 5. The highest Lac activity (178.57 UL−1) was detected, whereas the activity of MnP and LiP was absent during this hour. The result, therefore, indicated thatDatroniasp. KAPI0039 was obviously able to breakdown both reactive dyes, and Lac was considered as a major lignin-degradation enzyme in this reaction.

Fungal Bioremediation of Phenolic Wastewaters in an Airlift Reactor

Of the various types of industry-generated effluents, those containing organic pollutants such as phenols are generally difficult to remediate. There is a need to develop new technologies that emphasize the destruction of these pollutants rather than their disposal. In this work the white rot fungus, Trametes pubescens, was demonstrated to be an effective bioremediation agent for the treatment of phenolic wastewaters. An airlift loop reactor was optimized, in terms of volumetric oxygen transfer rate (K(L)a = 0.45 s(-1)), to provide an environment suited to rapid growth of T.pubescens (mu = 0.25 day(-1)) and a particularly efficient growth yield on glucose of 0.87 g biomass.g glucose(-1). The phenolic effluent was shown to be a paramorphogen, influencing fungal pellet morphology in the reactor, as well as increasing laccase enzyme activity by a factor of 5 over the control, to a maximum of 11.8 U.mL(-1). This increased activity was aided by the feeding of nonrepressing amounts (0.5 g.L(-1)) of glucose to the reactor culture. To our knowledge the degradation results represent the highest rate of removal (0.033 g phenol.g biomass(-1).day(-1)) of phenolic compounds from water reported for white rot fungi.

Chloroperoxidase-mediated transformation of highly halogenated monoaromatic compounds

Peroxidase transformations of widely distributed pollutants, tetra- and penta-chlorinated phenols and anilines, were studied using different peroxidases. Chloroperoxidase from Caldariomyces fumago was able to transform tetra- and penta-chlorinated phenols and anilines, while horseradish peroxidase, lignin peroxidase from Phanerochaete chrysosporium and versatile peroxidase from Bjerkandera adusta were able only to transform the halogenated phenols. Chloroperoxidase showed a specific activity on pentachlorophenol two orders of magnitude higher than lignin peroxidase and horseradish peroxidase, and one order of magnitude higher than versatile peroxidase. The main product from peroxidase oxidation in all cases was a polymeric and insoluble material. The insolubilization of halogenated phenols and anilines permits their removal, reduces their bioavailability, and thus reduces their environmental impact. The other minor products from the enzymatic transformation of highly chlorinated compounds were determined by mass spectrometry. Tetrachloroquinone, dimers and trimers of halogenated compounds were also identified. Chloroperoxidase was able to halogenate tetrachloroaniline to form pentachloroaniline.

Removal of pentachlorophenol from aqueous solutions by dolomitic sorbents

The partial decomposition of dolomite carried out within the temperature range 600-1000 degrees C provides new sorbents, called dolomitic sorbents. Their surface properties and identification by X-ray diffraction are discussed. The lowest specific surface area value was found for the raw dolomite, while the highest value was achieved by the D-1000 sample. The adsorption equilibrium of pentachlorophenol from aqueous solutions on the examined sorbents was investigated at 30, 40, and 50 degrees C via a bath process. Langmuir, Freundlich, Langmuir-Freundlich, and Redlich-Petersen models were fitted to experimental equilibrium data, and their goodnesses of fit are compared. The adjustable parameters of Langmuir-Freundlich and Redlich-Petersen isotherms were estimated by nonlinear least-squares analysis. Langmuir and Freundlich models were found insufficient to explain the adsorption equilibrium, while Langmuir-Freundlich and Redlich-Petersen isotherms provide the best correlation of the pentachlorophenol adsorption onto dolomitic sorbents.

Photodegradation of pentachlorophenol and its degradation pathways predicted using density functional theory

The objectives of the present research were (i) to report the mass balance of chlorine during pentachlorophenol (PCP) photodegradation and (ii) to reveal the photodegradation pathway experimentally with a theoretical proof based on the density functional theory (DFT). The chlorine of PCP was completely mineralized to produce chloride ions after 24h of UV irradiation. As intermediates, 2,3,5,6-tetrachlorophenol, 2,3,4,6-tetrachlorophenol and 2,5-dichlorophenol were identified. At least 80% of the chlorine balance during PCP photodegradation was accounted by PCP, these intermediates, and chloride ions. A DFT calculation showed differences in the C-Cl bond dissociation energy level and the positions of respective PCP molecular and the PCP intermediates. The dechlorination intermediates predicted using the calculated C-Cl bond dissociation energy were consistent with those experimentally confirmed, indicating the feasibility of this theoretical method in predicting the dechlorination pathway.

Enzymatic activity, osmotic stress and degradation of pesticide mixtures in soil extract liquid broth inoculated with Phanerochaete chrysosporium and Trametes versicolor

In this study we examined the extracellular enzymatic activity of two white rot fungi (Phanerochaete chrysosporium and Trametes versicolor) in a soil extract broth in relation to differential degradation of a mixture of different concentrations (0-30 p.p.m.) of simazine, dieldrin and trifluralin under different osmotic stress (-0.7 and -2.8 MPa) and quantified enzyme production, relevant to P and N release (phosphomonoesterase, protease), carbon cycling (beta-glucosidase, cellulase) and laccase activity, involved in lignin degradation. Our results suggest that T. versicolor and P. chrysosporium have the ability to degrade different groups of pesticides, supported by the capacity for expression of a range of extracellular enzymes at both -0.7 and -2.8 MPa water potential. Phanerochaete chrysosporium was able to degrade this mixture of pesticides independently of laccase activity. In soil extract, T. versicolor was able to produce the same range of enzymes as P. chrysoporium plus laccase, even in the presence of 30 p.p.m. of the pesticide mixture. Complete degradation of dieldrin and trifluralin was observed, while about 80% of the simazine was degraded regardless of osmotic stress treatment in a nutritionally poor soil extract broth. The capacity of tolerance and degradation of high concentrations of mixtures of pesticides and production of a range of enzymes, even under osmotic stress, suggest potential bioremediation applications.