Organogenesis and somatic embryogenesis in tissues derived from leaf protoplasts and leaf expiants of Medicago sativa

Induction and Transcriptome Analysis of Callus Tissue from Endosperm of Makapuno Coconut

The makapuno coconut endosperm is distinguished by its soft and irregular texture, in contrast to the solid endosperm of regular coconuts. To establish a scientific foundation for studying makapuno coconuts, callus was induced from makapuno endosperm using a combination of plant growth regulators. The induction was successful, and the resulting callus was subsequently subcultured for further study. Transcriptome sequencing of the makapuno callus identified 429 differentially expressed genes (DEGs), with 273 upregulated and 156 downregulated, compared to callus derived from regular coconut endosperm. Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway enrichment analysis indicated that these DEGs were involved in key metabolic pathways, including fructose and mannose metabolism, carbon fixation in photosynthetic organisms, galactose metabolism, and amino sugar and nucleotide sugar metabolism. Furthermore, lipid content analysis of the makapuno callus revealed a significantly higher total lipid level compared to regular callus, with notable differences in the levels of specific fatty acids, such as myristic acid, palmitic acid, and linoleic acid. This study establishes a novel platform for molecular biological research on makapuno coconuts and provides valuable insights into the molecular mechanisms underlying the formation of makapuno callus tissue. The findings also lay the groundwork for future research aimed at elucidating the unique properties of makapuno endosperm and exploring its potential applications.

In Vitro Regeneration Potential of White Lupin (Lupinus albus) from Cotyledonary Nodes

The tissue culture regeneration system of Lupinus albus has always been considered as recalcitrant material due to its genotype-dependent response and low regeneration efficiency that hamper the use of genetic engineering. Establishment of repeatable plant regeneration protocol is a prerequisite tool for successful application of genetic engineering. This aim of this study was to develop standardized, efficient protocol for successful shoot induction from cotyledonary node of white lupin. In this study, 5 day old aseptically cultured seedlings were used to prepare three explants (half cotyledonary node, HCN; whole cotyledonary node, WCN; and traditional cotyledonary node, TCN), cultured on four concentrations of M519 medium (M519, ½ M519, 1/3 M519, and ¼ M519), containing four carbohydrate sources (sucrose, fructose, maltose, and glucose), and stimulated with various combinations of KT (kinetin), and NAA (naphthalene acetic acid) for direct shoot regeneration. High frequency of 80% shoot regeneration was obtained on ½ M519 medium (KT 4.0 mg L-1 + NAA 0.1 mg L-1) by using HCN as an explant. Interestingly, combinations of (KT 4.0 mg L-1 + NAA 0.1 mg L-1 + BAP 1.67 mg L-1), and (KT 2.0 mg L-1 + NAA 0.1 mg L-1) showed similar shoot regeneration frequency of 60%. Augmentation of 0.25 g L-1 activated charcoal (AC) not only reduced browning effect but also improved shoot elongation. Among the all carbohydrate sources, sucrose showed the highest regeneration frequency with HCN. Additionally, 80% rooting frequency was recorded on ½ M519 containing IAA 1.0 mg L-1 + KT 0.1 mg L-1 (indole acetic acid) after 28 days of culturing. The present study describes establishment of an efficient and successful protocol for direct plant regeneration of white lupin from different cotyledonary nodes.

Extra thin alginate film: an efficient technique for protoplast culture

This paper reports an efficient protoplast culture technique, the "extra thin alginate film" technique. The development of this improved method of protoplast culture was an outcome of an assessment of the efficiency and shortcomings of various protoplast culture techniques. The efficiency of this technique was evaluated with two model plant systems, viz., Nicotiana tabacum and Lotus corniculatus, and a comparison was made with the "thin alginate layer" technique, another efficient protoplast culture system. Results indicate that the culture technique with extra thin alginate film is as efficient as the technique with thin alginate layer, with many additional advantages. The present innovation overcomes most of the limitations of protoplast culture techniques described so far and can now be applied to a wide variety of crops to check its general applicability.

Plant protoplasts: status and biotechnological perspectives

Plant protoplasts ("naked" cells) provide a unique single cell system to underpin several aspects of modern biotechnology. Major advances in genomics, proteomics, and metabolomics have stimulated renewed interest in these osmotically fragile wall-less cells. Reliable procedures are available to isolate and culture protoplasts from a range of plants, including both monocotyledonous and dicotyledonous crops. Several parameters, particularly the source tissue, culture medium, and environmental factors, influence the ability of protoplasts and protoplast-derived cells to express their totipotency and to develop into fertile plants. Importantly, novel approaches to maximise the efficiency of protoplast-to-plant systems include techniques already well established for animal and microbial cells, such as electrostimulation and exposure of protoplasts to surfactants and respiratory gas carriers, especially perfluorochemicals and hemoglobin. However, despite at least four decades of concerted effort and technology transfer between laboratories worldwide, many species still remain recalcitrant in culture. Nevertheless, isolated protoplasts are unique to a range of experimental procedures. In the context of plant genetic manipulation, somatic hybridisation by protoplast fusion enables nuclear and cytoplasmic genomes to be combined, fully or partially, at the interspecific and intergeneric levels to circumvent naturally occurring sexual incompatibility barriers. Uptake of isolated DNA into protoplasts provides the basis for transient and stable nuclear transformation, and also organelle transformation to generate transplastomic plants. Isolated protoplasts are also exploited in numerous miscellaneous studies involving membrane function, cell structure, synthesis of pharmaceutical products, and toxicological assessments. This review focuses upon the most recent developments in protoplast-based technologies.

Callus induction from protoplasts of V. unguiculata, V. sublobata and V. mungo

Protoplasts were isolated from hypocotyl of V. mungo (L.) Hepper or hypocotyl-derived callus of V. sublobata (Phaseolus sublobata Roxb.) and V. unguiculata (L.) Walp (syn. V. sinensis (L.) Saviex Hassk) using an enzyme solution comprising Cellulase 2.5%, Macerozyme, Hemicellulase and Driselase each at a 0.5% level in 0.5 M sorbitol. Isolated protoplasts were cultured in Murashige and Skoog's (1962) basal liquid medium supplemented with BA, NAA, 2,4-D (1 mg/l each) and sucrose (14%). After four weeks, protoplast colonies were transferred to the same medium with a reduced level of sucrose (7%). Colonies proliferated into actively growing calli. Further attempts to regenerate plants from such calli were not successful. However, protoclones of V. unguiculata differentiated roots on auxin/cytokinin supplemented media. Alternative methods for shoot differentiation from protoplastderived cultures were tried by the use of Agrobacterium tumefaciens "shooter" strains pGV 2215 or pGV 2298 or wild type strain B6S3.

Protoplast-derived streptomycin resistant plants of the forage legume Onobrychis viciifolia Scop. (sainfoin)

Approximately 10(6) protoplast-derived cell colonies of sainfoin were stressed with streptomycin and two resistant colonies were recovered. Plants regenerated from these colonies could be recallused on streptomycin-containing medium three years after growth in the absence of the antibiotic.Ultrastructural studies showed cells of resistant callus grown in the presence of streptomycin to contain chloroplasts with internal thykaloids and grana. Such mutant plants should be useful in designing biochemical selection schemes to recover somatic hybrids and cybrids.

Regeneration of isolated mesophyll and cell suspension protoplasts to plants in Stylosanthes guianensis. A tropical forage legume

Protoplasts were isolated from leaf mesophyll and cell suspensions of two accessions of Stylosanthes guianensis (Aubl.), a tropical forage legume. When cultured in VKM liquid culture medium, both types of protoplasts divided at a rate of 4-8%, and subsequently formed cell colonies. Protoplast-derived calluses produced numerous shoots when transferred to regeneration medium. Regenerated shoots could be easily rooted, and plantlets were transferred to soil. The effects of several factors on the efficiency of this protoplast system have been investigated.

Somatic embryogenesis and plantlet regeneration in the soybean Glycine max

A tissue culture procedure for the regeneration of somatic embryos and plantlets from somatic cells of the soybean Glycine max is described. Bean pods of soybean cv. TGM119 were immersed in liquid nitrogen for 20 minutes. Young embryos were excised from the immature seeds and cultured to form calli. Calli grown from the young embryos were incubated in liquid culture for two weeks. The liquid suspension culture was filtered to obtain single cells. The soybean cells were cultured for one month in a liquid medium in hanging drop cultures for development into proembryoids. The proembryoids were maintained on a solid growth medium for 40 days. The resultant callus tissue was transferred into MS media containing selected combinations and concentrations of 2,4-Dichlorophenoxyacetic acid, Naphthaleneacetic acid, Kinetin, Benzyladenine and Indoleacetic acid. In the presence of Benzyladenine (0.2 mg/l) and Indoleacetic acid (0.01 mg/l), globular and heart shaped somatic embryos were formed on the surface of the calli. Calli containing somatic embryos were transferred into liquid medium and incubated under low light conditions. After six months further incubation, more than 1,000 plantlets and a large number of somatic embryoids at various developmental stages were obtained per flask.

Isolation of protoplasts and regeneration of callus from suspension cultures of cultivated beets

Conditions necessary for the isolation and culture of protoplasts from suspension cultures of sugar, fodder and garden beets were investigated. Good yields of protoplasts were obtained by treating cells with a mixture of cellulase, Macerozyme and Driselase enzymes. Nutritional requirements of beet protoplasts were found to be quite simple: protoplasts could be cultured in MS, B5 or PGo based media with 0.4 M glucose with the optimum result being produced on KM8p medium. Plating efficiency (P.E) was genotype-dependent with the sugar beet giving better P.E. than the fodder or garden beets used, and higher values being achieved with the use of desalted Driselase for isolation followed by culture on KMBp medium.

Induction of efficient cell division in alfalfa protoplasts

Alfalfa (Medicago sativa L.) protoplasts derived from cell suspension cultures divided inefficiently in liquid culture. The onset of cell division activity occurred synchronously among the protoplasts; however, many were blocked at cytokinesis and therefore did not complete first division. Very few of the cells that began to divide continued to do so. Immobilization of protoplasts in agarose after 1 to 4 days in liquid culture overcame this inhibition of division. Continuous growth in agarose was restricted and therefore microcolonies were transferred to agar medium to complete callus development. Plating efficiencies of 2-10% were achieved within 30 days of protoplast isolation. The agarose treatment was responsible for a 5- to 30-fold improvement in plating efficiency.

Screening of diploid Medicago sativa germplasm for somatic embryogenesis

Nineteen accessions of diploid Medicago sativa L. belonging to the four subspecies sativa, caerula, falcata and xvaria were screened for their ability to produce somatic embryos on hypocotyl-derived callus. Two medium protocols were used in this study, a three-step sequence with exposure of the callus cultures to a high 2,4-D concentration and a two-step sequence without exposure to a high 2,4-D concentration. Considerable variation for callus proliferation was observed. In general, the diploid M. sativa accessions showed poor regenerability and it was not possible to correlate high regeneration frequencies with a particular germplasm source. It was, however, possible to identify regenerable genotypes in all four subspecies. One falcata accession produced somatic embryos on the callus induction media at high frequencies. This response was also obtained with a few genotypes from one xvaria accession. All regenerable plants were maintained as shoot cultures and were able to form somatic embryos on petiole-derived calli.

Studies on a drought resistant legume: The moth bean, Vigna aconitifolia (Jacq) marechal. I. Protoplast culture and organogenesis

High yields of viable protoplasts were obtained from callus cultures derived from shoot apices of Vigna aconitifolia (JACQ) Marechal. The protoplasts divided and formed cell clusters on modified MS medium. The protoplast-derived callus formed multiple shoot buds on MS and B5 basal media without supplements, on MS medium containing supplements and on B5 medium containing charcoal (0.25%). Shoot formation occurred.

Plant regeneration from protoplast-derived tissues of Linum usitatissimum L. (Flax)

Protoplasts were isolated enzymatically from seedling roots, hypocotyls and cotyledons of Linum usitatissimum L. which divided to form callus. Plant regeneration was obtained from protoplast-derived tissues of root and cotyledon, but only rhizogenesis was observed in the case of protoplasts derived from hypocotyls. The ability to isolate, culture, and regenerate plants from root and cotyledon protoplasts of Linum usitatissimum L. is discussed in relation to future attempts to produce somatic hybrids between Linum species.

An assessment of the cultural capabilities of Trifolium repens L. (white clover) and Onobrychis viciifolia Scop. (sainfoin) mesophyll protoplasts

Mesophyll protoplasts isolated from white clover and sainfoin divided to form callus under similar cultural conditions. White clover protoplasts showed varietal differences in their plating efficiency. Sainfoin tissues regenerated readily by forming shoots, but induction of morphogenesis in white clover was only achieved after testing several media and culture sequences. Many of the white clover shoots were abnormal in being fused together to form green plate-like structures, but the latter still developed into plantlets while attached to the parent callus. The ability to isolate, culture, and regenerate mesophyll protoplasts of these two forage legumes is discussed in relation to future attempts to produce somatic hybrids between high tannin containing bloat-safe sainfoin and other major forage legumes such as alfalfa, white clover, and red clover.

Selection for NaCl tolerance in cell cultures of Medicago sativa and recovery of plants from a NaCl-tolerant cell line

Medicago sativa lines with a high incidence of regeneration were established as suspension cultures and used to select for NaCl tolerant lines. Attempts were then made to regenerate plants from these lines. Regeneration was severely depressed in NaCl tolerant calli and the only plants that were successfully regenerated were from one callus of M. sativa cv. Regen S which grew in 62.5 mM NaCl. Plants from this callus, and new calli derived from the recovered plants, have shown a tolerance to NaCl comparable to calli and plants from the initial seed stock rather than an improved level of tolerance.

Mesophyll protoplasts of fenugreek (Trigonella foenumgraecum): Isolation, culture and shoot regeneration

High yields of mesophyll protoplasts were obtained after treatment of leaves of Trigonella foenumgraecum, a forage legume, with purified cellulase. Under appropriate conditions of culture up to 70% plating efficiency could be obtained. The protoplast-derived colonies developed into rapidly growing green calli and produced leafy shoots on a medium containing 0.1 mg/l each of benzylaminopurine (BAP) and zeatin. Addition of glutamine and asparagine to the medium was found essential for rapid cell division, callus growth and differentiation.

Phenotypic variation and ploidy level of plants regenerated from protoplasts of tetraploid potato (Solanum tuberosum L. cv. 'Bintje')

A wide range of phenotypic variation occurred among protoplast - derived plants of tetraploid potato cultivar 'Bintje'. The variant plants had alterations in growth and vigour, and in leaf and stem characteristics. The results suggest that the altered morphologies are caused predominantly by changes in ploidy levels. Some alterations could be attributed typically to octoploidy and aneuploidy. The occurrence of mixoploidy indicates that at least part of the observed variation arose during culture stage. The exogeneous cytokinin or auxin level and their combination during in vitro phase influenced the frequency of the variants observed. The origin of variation is discussed.

Prolific plant regeneration from protoplast-derived tissues of Lotus corniculatus L. (birdsfoot trefoil)

Protoplasts isolated enzymatically from seedling roots, hypocotyls and cotyledons of Lotus corniculatus L. produced callus which underwent prolific shoot regeneration. The rapidity and ease of recovering plants from protoplast-derived tissues makes this forage legume an attractive experimental system for genetic manipulation.

Somatic embryogenesis from mesophyll protoplasts of Trigonella corniculata (leguminosae)

Mesophyll protoplasts isolated enzymatically from Trigonella corniculata divided to form callus, with a plating efficiency of 49% in Kao (1977) medium. Protoplast-derived tissues formed somatic embryoids at high frequency on MS medium with 2.0 mg L(-7) NAA and 0.5 mg L(-7) BAP. Embryoids developed into plants on MS medium lacking hormones.

Somaclonal variation - a novel source of variability from cell cultures for plant improvement

It is concluded from a review of the literature that plant cell culture itself generates genetic variability (somaclonal variation). Extensive examples are discussed of such variation in culture subclones and in regenerated plants (somaclones). A number of possible mechanisms for the origin of this phenomenon are considered. It is argued that this variation already is proving to be of significance for plant improvement. In particular the phenomenon may be employed to enhance the exchange required in sexual hybrids for the introgression of desirable alien genes into a crop species. It may also be used to generate variants of a commercial cultivar in high frequency without hybridizing to other genotypes.