Biological Properties of Poly-α- Amino Acids

Poly-basic peptides and polymers as new drug candidates against Plasmodium falciparum

BACKGROUND

Plasmodium falciparum, the malaria-causing parasite, is a leading cause of infection-induced deaths worldwide. The preferred treatment approach is artemisinin-based combination therapy, which couples fast-acting artemisinin derivatives with longer-acting drugs, such as lumefantrine, mefloquine, and amodiaquine. However, the urgency for new treatments has risen due to the parasite's growing resistance to existing therapies. In this study, a common characteristic of the P. falciparum proteome-stretches of poly-lysine residues, such as those found in proteins related to adhesion and pathogenicity-is investigated for its potential to treat infected erythrocytes.

METHODS

This study utilizes in vitro culturing of intra-erythrocytic P. falciparum to assess the ability of poly-lysine peptides to inhibit the parasite's growth, measured via flow cytometry of acridine orange-stained infected erythrocytes. The inhibitory effect of many poly-lysine lengths and modifications were tested this way. Affinity pull-downs and mass spectrometry were performed to identify the proteins interacting with these poly-lysines.

RESULTS

A single dose of these poly-basic peptides can successfully diminish parasitemia in human erythrocytes in vitro with minimal toxicity. The effectiveness of the treatment correlates with the length of the poly-lysine peptide, with 30 lysine peptides supporting the eradication of erythrocytic parasites within 72 h. PEG-ylation of the poly-lysine peptides or utilizing poly-lysine dendrimers and polymers retains or increases parasite clearance efficiency and bolsters the stability of these potential new therapeutics. Lastly, affinity pull-downs and mass-spectrometry identify P. falciparum's outer membrane proteins as likely targets for polybasic peptide medications.

CONCLUSION

Since poly-lysine dendrimers are already FDA-approved for drug delivery and this study displays their potency against intraerythrocytic P. falciparum, their adaptation as anti-malarial drugs presents a promising new therapeutic strategy for malaria.

Sustainable Janus lignin-based polyurethane biofoams with robust antibacterial activity and long-term biofilm resistance

Conventional antibiotic therapies have been becoming less efficient due to increasingly, and sometimes fully, antibiotic-resistant bacterial strains, sometimes known as "superbacteria" or "superbugs." Thus, novel antibacterial materials to effectively inhibit or kill bacteria are crucial for humanity. As a broad-spectrum antimicrobial agent, silver nanoparticles (Ag NPs) have been the most widely commercialized of biomedical materials. However, long-term use of significant amounts of Ag NPs can be potentially harmful to human health through a condition known as argyria, in addition to being toxic to many environmental systems. It is, thus, highly necessary to reduce the amount of Ag NPs employed in medical treatments while also ensuring maintenance of antimicrobial properties, in addition to reducing the overall cost of treatment for humanitarian utilization. For this purpose, naturally sourced antimicrobial polylysine (PL) is used to partially replace Ag NPs within the materials composition. Accordingly, a series of PL, Ag NPs, and lignin-based polyurethane (LPU) composite biofoams (LPU-PL-Ag) were prepared. These proposed composite biofoams, containing at most only 2 % PL and 0.03 % Ag NPs, significantly inhibited the growth of both Gram-positive and Gram-negative bacteria within 1 h and caused irreversibly destructive bactericidal effects. Additionally, with a layer of polydimethylsiloxane (PDMS) on the surface, PDMS-LPU-PL(2 %)-Ag(0.03 %) can effectively prevent bacterial adhesion with a clearance rate of about 70 % for both bacterial biofilms within three days and a growth rate of more than 80 % for mouse fibroblasts NIH 3 T3. These lignin-based polyurethane biofoam dressings, with shorter antiseptic sterilization times and broad-spectrum antibacterial effects, are extremely advantageous for infected wound treatment and healing in clinical use.

Poly-basic peptides and polymers as new drug candidate against Plasmodium falciparum

Plasmodium falciparum, the malaria-causing parasite, is a leading cause of infection-induced deaths worldwide. The preferred treatment approach is artemisinin-combination therapy, which couples fast-acting artemisinin derivatives with longer-acting drugs like lumefantrine, mefloquine, and amodiaquine. However, the urgency for new treatments has risen due to the parasite's growing resistance to existing therapies. Our study shows that a common characteristic of the P. falciparum proteome - stretches of poly-lysine residues such as those found in proteins related to adhesion and pathogenicity - can serve as an effective peptide treatment for infected erythrocytes. A single dose of these poly-basic peptides can successfully diminish parasitemia in human erythrocytes in vitro with minimal toxicity. The effectiveness of the treatment correlates with the length of the poly-lysine peptide, with 30 lysine peptides supporting the eradication of erythrocytic parasites within 72 hours. PEG-ylation of the poly-lysine peptides or utilizing poly-lysine dendrimers and polymers further increases parasite clearance efficiency and bolsters the stability of these potential new therapeutics. Lastly, our affinity pull-downs and mass-spectrometry identify P. falciparum's outer membrane proteins as likely targets for polybasic peptide medications. Since poly-lysine dendrimers are already FDA-approved for drug delivery, their adaptation as antimalarial drugs presents a promising new therapeutic strategy.

Effects of different conformations of polylysine on the anti-tumor efficacy of methotrexate nanoparticles

Drug delivery systems require that carrier materials have good biocompatibility, degradability, and constructability. Poly(amino acids), a substance with a distinctive secondary structure, not only have the basic features of the carrier materials but also have several reactive functional groups in the side chain, which can be employed as drug carriers to deliver anticancer drugs. The conformation of isomers of drug carriers has some influence on the preparation, morphology, and efficacy of nanoparticles. In this study, two isomers of polylysine, including ε-polylysine (ε-PL) and α-polylysine (α-PL), were used as drug carriers to entrap methotrexate (MTX) and construct nano-drug delivery systems. ε-PL/MTX nanoparticles with the morphology of helical nanorods presented a small particle size (115.0 nm), and relative high drug loading content (57.8 %). The anticancer effect of ε-PL/MTX nanoparticles was 1.3-fold and 2.6-fold stronger than that of α-PL/MTX nanoparticles in vivo and in vitro, respectively. ε-PL is an ideal drug carrier with potential clinical application prospects.

Photodynamic therapy: Innovative approaches for antibacterial and anticancer treatments

Photodynamic therapy is an alternative treatment mainly for cancer but also for bacterial infections. This treatment dates back to 1900 when a German medical school graduate Oscar Raab found a photodynamic effect while doing research for his doctoral dissertation with Professor Hermann von Tappeiner. Unexpectedly, Raab revealed that the toxicity of acridine on paramecium depends on the intensity of light in his laboratory. Photodynamic therapy is therefore based on the administration of a photosensitizer with subsequent light irradiation within the absorption maxima of this substance followed by reactive oxygen species formation and finally cell death. Although this treatment is not a novelty, there is an endeavor for various modifications to the therapy. For example, selectivity and efficiency of the photosensitizer, as well as irradiation with various types of light sources are still being modified to improve final results of the photodynamic therapy. The main aim of this review is to summarize anticancer and antibacterial modifications, namely various compounds, approaches, and techniques, to enhance the effectiveness of photodynamic therapy.

The Pathways to Create Containers for Bacteriophage Delivery

Antimicrobial resistance is a global public health threat. One of the possible ways to solve this problem is phage therapy, but the instability of bacteriophages hinders the development of this approach. A bacteriophage delivery system that stabilizes the phage is one of the possible solutions to this problem. This study is dedicated to exploring methods to create encapsulated forms of bacteriophages for delivery. We studied the effect of proteolytic enzymes on the destruction of the polyelectrolyte microcapsule shell and revealed that protease from Streptomyces griseus was able to destroy the membrane of the microcapsule (dextran sulfate/polyarginine)3 ((DS/PArg)3). In addition, the protease decreased the activity of the bacteriophage in the second hour of incubation, and the phage lost activity after 16 h. It was found that a medium with pH 9.02 did not affect the survival of the bacteriophage or E. coli. The bacteriophages were encapsulated into polyelectrolyte microcapsules (DS/PArg)3. It was established that it is impossible to use microcapsules as a means of delivering bacteriophages since the bacteriophages are inactivated. When bacteriophages were included inside a CaCO3 core, it was demonstrated that the phage retained activity before and after the dissolution of the CaCO3 particle. From the results of this study, we recommend using CaCO3 microparticles as a container for bacteriophage delivery through the acidic stomach barrier.

Chitosan utilized for bacterial preparation for scanning electron microscopy

Bacterial sample preparation is crucial for its observation by scanning electron microscopy (SEM). However, the current polylysine (PLL) method leads to bacterial morphological changes. To overcome this problem, we employed chitosan (CS) to coat coverslips to prepare bacteria for SEM and compared it with the PLL method. Coverslips coated with 0.025% (w/v) CS showed satisfactory bacterial binding ability. Within 30 min of binding time, the number of bacteria on CS-coated and PLL-coated coverslips exhibited no differences. Four bacteria strains were employed to compare the differences in SEM images between the two methods. Most of the bacteria showed irregular surface or sticky substances after settling on PLL-coated coverslips, while bacteria with clear surface texture were observed on CS-coated coverslips. Transmission electron microscopy (TEM) images showed deformed bacterial envelope on PLL-coated coverslips; meanwhile, similar intact envelope was observed from the bacteria on CS-coated coverslips and the bacteria without any treatment. The TEM results verified the morphological differences of SEM between the two methods. Except for morphology, the length of the rod-shaped bacteria was longer on CS-coated coverslips than that on PLL-coated coverslips, less shrinkage of the sample was observed, and CS could preserve the length of the rod-shaped bacteria better than PLL in its preparation for SEM. It is demonstrated that the low-cost CS could be utilized in bacterial preparation for SEM to acquire preferable images. Bacterial suspension with optical density at 600 nm of about 0.5, deposited on 0.025% CS-coated coverslips for 30 min, and followed by routine fixation, dehydration, and drying are optimal parameters.

Advances of peptides for antibacterial applications

In the past few decades, peptide antibacterial products with unique antibacterial mechanisms have attracted widespread interest. They can effectively reduce the probability of drug resistance of bacteria and are biocompatible, so they possess tremendous development prospects. This review provides recent research and analysis on the basic types of antimicrobial peptides (including poly (amino acid)s, short AMPs, and lipopeptides) and factors to optimize antimicrobial effects. It also summarizes the two most important modes of action of antimicrobial peptides and the latest developments in the application of AMPs, including antimicrobial agent, wound healing, preservative, antibacterial coating and others. Finally, we discuss the remaining challenges to improve the antibacterial peptides and propose prospects in the field.

Enhancement of local bone formation on titanium implants in osteoporotic rats by biomimetic multilayered structures containing parathyroid hormone (PTH)-related protein

Osteoporosis is a severe health problem causing bone fragility and consequent fracture. Titanium (Ti) implants, used in patients with osteoporotic fractures, are prone to failure because of the decreased bone mass and strength. Therefore, it is of utmost importance to fabricate implants possessing osteogenic properties to improve implant osseointegration. To improve the long-term survival rate of Ti implants in osteoporotic patients, hyaluronic acid/ϵ-polylysine multilayers containing the parathyroid hormone (PTH)-related protein (PTHrP) were deposited on Ti implants by a layer-by-layer (LBL) electro assembly technique. The murine pre-osteoblast cell line MC3T3-E1, possessing a high potential of osteoblast differentiation, was used to evaluate the osteo-inductive effects of Ti-LBL-PTHrP in vitro. In addition, the performance of the Ti (Ti-LBL-PTHrP) implant was evaluated in vivo in a femoral intramedullary implantation in Sprague Dawley rats. The Ti-LBL-PTHrP implant regulated the release of the loaded PTHrP to increase bone formation in the early stage of implantation. The in vitro results revealed that cells on Ti-LBL-PTHrP did not show any evident proliferation, but a high level of alkaline phosphatase activity and osteoblast-related protein expression was found, compared to the uncoated Ti group (p < 0.05). In addition, in vivo micro-CT and histological analysis demonstrated that the Ti-LBL-PTHrP implants could significantly promote the formation and remodeling of new bone in osteoporotic rats at 14 d after implantation. Overall, this study established a profound and straightforward methodology for the manufacture of biofunctional Ti implants for the treatment of osteoporosis.

Pyrene-Terminated, Amphiphilic Polypeptide and Its Hydrogen-Bonded Interpolymer Complex as Delivery Systems of Doxorubicin

The intensity ratio between the first (373 nm) and the third (383 nm) vibronic peaks [I ₁/I ₃, as the pyrene (Py) scale] of fluorescent Py was used to monitor the critical concentration, drug-loading, and -releasing behaviors of a Py-terminated, amphiphilic polypeptide PPM and its hydrogen-bonded interpolymer complex (HIPC) with poly(acrylic acid) (PAA). Primarily, an amphiphilic PPM with a hydrophobic Py terminal and hydrophilic methoxy-bis(ethylene oxide) pendant groups was synthesized through multiple preparative steps, and the resultant PPM was thoroughly mixed with PAA through a preferable hydrogen bond (H bond) interaction to form HIPC. The emission study suggested that the I ₁/I ₃ ratio and the quantum yield (Φ_F) are effective in determining the critical concentrations of the aqueous PPM and PPM/PAA solutions. Moreover, the I ₁/I ₃ ratio and Φ_F were found to be convenient measures for determining the amounts of doxorubicin drugs loaded by and released from the aqueous PPM and PPM/PAA solutions.

The Immunomodulatory Drug Glatiramer Acetate is Also an Effective Antimicrobial Agent that Kills Gram-negative Bacteria

Classic drug development strategies have failed to meet the urgent clinical needs in treating infections with Gram-negative bacteria. Repurposing drugs can lead to timely availability of new antibiotics, accelerated by existing safety profiles. Glatiramer acetate (GA) is a widely used and safe formulation for treatment of multiple sclerosis. It contains a large diversity of essentially isomeric polypeptides with the cationic and amphiphilic character of many antimicrobial peptides (AMP). Here, we report that GA is antibacterial, targeting Gram-negative organisms with higher activity towards Pseudomonas aeruginosa than the naturally-occurring AMP LL-37 in human plasma. As judged from flow cytometric assays, bacterial killing by GA occurred within minutes. Laboratory strains of Escherichia coli and P. aeruginosa were killed by a process of condensing intracellular contents. Efficient killing by GA was also demonstrated in Acinetobacter baumannii clinical isolates and approximately 50% of clinical isolates of P. aeruginosa from chronic airway infection in CF patients. By contrast, the Gram-positive Staphylococcus aureus cells appeared to be protected from GA by an increased formation of nm-scale particulates. Our data identify GA as an attractive drug repurposing candidate to treat infections with Gram-negative bacteria.

Strategies to Fabricate Polypeptide-Based Structures via Ring-Opening Polymerization of N-Carboxyanhydrides

In this review, we provide a general and clear overview about the different alternatives reported to fabricate a myriad of polypeptide architectures based on the ring-opening polymerization of N-carbonyanhydrides (ROP NCAs). First of all, the strategies for the preparation of NCA monomers directly from natural occurring or from modified amino acids are analyzed. The synthetic alternatives to prepare non-functionalized and functionalized NCAs are presented. Protection/deprotection protocols, as well as other functionalization chemistries are discussed in this section. Later on, the mechanisms involved in the ROP NCA polymerization, as well as the strategies developed to reduce the eventually occurring side reactions are presented. Finally, a general overview of the synthetic strategies described in the literature to fabricate different polypeptide architectures is provided. This part of the review is organized depending on the complexity of the macromolecular topology prepared. Therefore, linear homopolypeptides, random and block copolypeptides are described first. The next sections include cyclic and branched polymers such as star polypeptides, polymer brushes and highly branched structures including arborescent or dendrigraft structures.

Selective Precipitation of Proteins

Selective precipitation of proteins can be used as a bulk method to recover the majority of proteins from a crude lysate, as a selective method to fractionate a subset of proteins from a protein solution, or as a very specific method to recover a single protein of interest from a purification step. This unit describes a number of methods suitable for selective precipitation. In each of the protocols that are outlined, the physical or chemical basis of the precipitation process, the parameters that can be varied for optimization, and the basic steps for developing an optimized precipitation are described.

Design and synthesis of nonionic copolypeptide hydrogels with reversible thermoresponsive and tunable physical properties

Polypeptide-based formulations that undergo liquid to hydrogel transitions upon change in temperature have become desirable targets since they can be mixed with cells or injected into tissues as liquids, and subsequently transform into rigid scaffolds or depots. Such materials have been challenging to prepare using synthetic polypeptides, especially when reversible gelation and tunable physical properties are desired. Here, we designed and prepared new nonionic diblock copolypeptide hydrogels (DCH) containing hydrophilic poly(γ-[2-(2-methoxyethoxy)ethyl]-rac-glutamate) and hydrophobic poly(l-leucine) segments, named DCHEO, and also further incorporated copolypeptide domains into DCHEO to yield unprecedented thermoresponsive DCH, named DCHT. Although previous attempts to prepare nonionic hydrogels composed solely of synthetic polypeptides have been unsuccessful, our designs yielded materials with highly reversible thermal transitions and tunable properties. Nonionic, thermoresponsive DCHT were found to support the viability of suspended mesenchymal stem cells in vitro and were able to dissolve and provide prolonged release of both hydrophilic and hydrophobic molecules. The versatility of these materials was further demonstrated by the independent molecular tuning of DCHT liquid viscosity at room temperature and DCHT hydrogel stiffness at elevated temperature, as well as the DCHT liquid to hydrogel transition temperature itself.

In vivo toxicity and biodistribution of intraperitoneal and intravenous poly-L-lysine and poly-L-lysine/poly-L-glutamate in rats

The combination of two differently charged polypeptides, poly-L-lysine (PL) and poly-L-glutamate (PG), has shown excellent postsurgical antiadhesive properties. However, the high molecular, positively charged PL is toxic in high doses, proposed as lysis of red blood cells. This study aims to elucidate the in vivo toxicity and biodistribution of PL and complex bound PLPG comparing intravenous and intraperitoneal administration. Fifty-six Sprague-Dawley rats were used in a model with repeated blood samples within 30 min examining blood gases and blood smears. Similarly, FITC labelled PL were used to track bio distribution and clearance of PL, given as single dose and complex bound to PG after intravenous and intraperitoneal administration. Tissue for histology and immunohistochemistry was collected. Blood gases and blood smears as well as histology points to a toxic effect of high dose PL given intravenously but not after intraperitoneal administration. The toxic effect is exerted through endothelial disruption and subsequent bleeding in the lungs, provoking sanguineous lung edema. FITC-labelled PL experiments reveal a rapid clearance with differences between routes and complex binding. This study advocates a new theory of the toxic effects in vivo of high molecular PL. PLPG complex is safe to use as antiadhesive prevention based on this toxicity study given that PL is always intraperitoneally administered in combination with PG and that the dose is adequate.

Fine tuning of vesicle assembly and properties using dual hydrophilic triblock copolypeptides

The design, synthesis, and self-assembly of the first dual hydrophilic triblock copolypeptide vesicles, R(H)(m)E(n)L(o) and K(P)(m)R(H)(n)L(o), is reported. Variation of the two distinct hydrophilic domains is used to tune cellular interactions without disrupting the self-assembled structure. The aqueous self-assemblies of these triblock copolypeptides in water are characterized using microscopy and DLS. Cell culture studies are used to evaluate cytotoxicity as well as intracellular uptake of the vesicles. The ability of polypeptides to incorporate ordered chain conformations that direct self-assembly, combined with the facile preparation of functional, multiblock copolypeptide sequences of defined lengths, allow the design of vesicles attractive for development as drug carriers.

Occurrence, biosynthesis, biodegradation, and industrial and medical applications of a naturally occurring ε-poly-L-lysine

ε-Poly-L-lysine (ε-PL) consists of 25-35 L-lysine residues with linkages between the α-carboxyl groups and the ε-amino groups. It exhibits antimicrobial activity against a spectrum of microorganisms, including bacteria and fungi. Because of its high levels of safety and biodegradability, it is used as a food preservative in several countries. We recently identified an ε-PL synthetase (Pls) as a membrane protein, and investigated the catalytic mechanism. Pls was found to be an unusual non-ribosomal peptide synthetase (NRPS)-like peptide synthetase producing ε-PL with chain-length diversity. In addition, transcriptional analysis of pls and a kinetic study of Pls further suggested that the Pls catalytic function is regulated by intracellular ATP, high levels of which are required for full enzymatic activity. Furthermore, it was found that acidic pH conditions during ε-PL fermentation are necessary for the accumulation of intracellular ATP, rather than inhibition of the ε-PL-degrading enzyme.

Monolayer Studies of Synthetic Poly (α-Amino Acids)

Synthetic poly-α-amino acids spread at the air-water interface can form monomolecular films. These polymers may assume several conformations, namely the α-helix, β-pleated sheets or random coils. The stabilizing forces can be inter- or intramolecular and are mainly hydrogen bonding and hydrophobic interactions. The area/residue values for helical polymers differ significantly from those of β-sheets.

Poly-α-amino acids can form both cholesteric and nematic structures. Synthetic polypeptides of amphiphilic character, of both α and β conformers, can by synthesized and are very surface active. These polymers associate with cell membranes or lipoproteins. Many biologically active polypeptides, such as hormones, form amphiphilic α-helices and these ligands bind to receptor sites on cell surfaces.

These polypeptides offer a source of materials whose properties can be varied as desired, providing opportunities for rationale drug design.

Effect of Synthetic Polylysine on Fungi

The synthetic, basic poly-alpha-amino acid, polylysine, had antifungal activity against plant pathogens (three strains of fusaria, three isolates of verticillia, and Ceratocystis fimbriata) and against the human pathogens (Trichophyton mentagrophytes, T. rubrum, and Candida albicans) in vitro. It inhibited penetration of Ceratocystis fimbriata on sweet potato slices. Polylysine inhibited the infection of tomato cuttings by Flsarium oxysporum f. lycopersici, but it was also toxic to the plants.

The reaction of rat mast cells to polylysine

The effects of a single intraperitoneal injection of polyamino acids (lysine, glutamic, aspartic) on mast cells of the rat are described. In vitro interaction of mast-cell components with these polyamino acids is also explored. Poly-DL-lysine (but not the acidic amino acids) has both immediate (minutes-hours) and long-term (days-weeks) effects on mast cells. At the dosage selected, some cells evidence rapid fusion of granules and degranulation, but without concomitant swelling; most display intracellular changes only. Neither degranulation nor granule fusion appears to be lethal. Rather, these spur the cell to greater synthetic activity which involves first the Golgi apparatus and subsequently also the endoplasmic reticulum. Early involvement of macrophages and eosinophils is described. Sequential studies after polylysine injection support the following concepts: (a) mast-cell granules exist as "physiological sets," several being confined to a common membranous "sac;" (b) each set can respond independently to applied stimuli; (c) each set can connect directly to the extracellular milieu; (d) poly-DL-lysine binds directly to the granules and stabilizes them; it is not readily digested; (e) mast-cell granules are produced directly; they do not arise by intake of exogenous polysaccharides. It is hypothesized that mast-cell granules are topologically outside the cell while held intimately within extensive cytoplasmic folds and recesses. Mast cells may function by causing intercellular connective tissue fluids to percolate over their granules which may process this fluid in some as yet undefined way(s).

Selective precipitation of proteins

Selective precipitation of proteins can be used as a bulk method to recover the majority of proteins from a crude lysate, as a selective method to fractionate a subset of proteins from a protein solution, or as a very specific method to recover a single protein of interest from a purification step. This unit describes a number of methods suitable for selective precipitation. In each of the protocols that are outlined, the physical or chemical basis of the precipitation process, the parameters that can be varied for optimization, and the basic steps for developing an optimized precipitation are described.

Examination of interactions of oppositely charged proteins in gels

Understanding the interactions of proteins with one another serves as an important step for developing faster protein separation methods. To examine protein-protein interactions of oppositely charged proteins, fluorescently labeled albumin and poly-l-lysine were subjected to electrophoresis in agarose gels, in which the cationic albumin and the anionic poly-L-lysine were allowed to migrate toward each other and interact. Fluorescence microscopy was used to image fluorescently tagged proteins in the gel. The secondary structure of the proteins in solution was studied using conventional FTIR spectroscopy. Results showed that sharp interfaces were formed where FITC tagged albumin met poly-L-lysine and that the interfaces did not migrate after they had been formed. The position of the interface in the gel was found to be linearly dependent upon the relative concentration of the proteins. The formation of the interface also depended upon the fluorescent tag attached to the protein. The size of the aggregates at the interface, the fluorescence intensity modifications, and the mobility of the interface for different pore sizes of the gel were investigated. It was observed that the interface was made up of aggregates of about 1 microm in size. Using dynamic light scattering, it was observed that the size of the aggregates that formed due to interactions of oppositely charged proteins depended upon the fluorescent tags attached to the proteins. The addition of small amounts of poly-L-lysine to solutions containing FITC albumin decreased the zeta potential drastically. For this, we propose a model suggesting that adding small amounts of poly-L-lysine to solutions containing FITC -albumin favors the formation of macromolecular complexes having FITC albumin molecules on its surface. Although oppositely charged FITC tagged poly-L-lysine and FITC tagged albumin influence each other's migration velocities by forming aggregates, there were no observable secondary structural modifications when the proteins were mixed in solution.

Polyarginine segments in block copolypeptides drive both vesicular assembly and intracellular delivery

Polymeric vesicles are a relatively new class of nanoscale self-assembled materials that show great promise as robust encapsulants. Compared with liposomes, use of polymeric building blocks for membrane formation allows increased stability, stimuli responsiveness and chemical diversity, which may prove advantageous for drug-delivery applications . A major drawback of most polymeric vesicles is the lack of biofunctionality, which restricts their ability to interact with cells and tissues. We have prepared vesicles composed of polyarginine and polyleucine segments that are stable in media, can entrap water soluble species, and can be processed to different sizes and prepared in large quantities. The remarkable feature of these materials is that the polyarginine segments both direct structure for vesicle formation and provide functionality for efficient intracellular delivery of the vesicles. This unique synergy between nanoscale self-assembly and inherent peptide functionality provides a new approach for design of multifunctional materials for drug delivery.

Stimuli-responsive polypeptide vesicles by conformation-specific assembly

In biology, lipids are well known for their ability to assemble into spherical vesicles. Proteins, in particular virus capsids, can also form regular vesicle-like structures, where the precise folding and stable conformations of many identical subunits directs their self-assembly. Functionality present on these subunits also controls their disassembly within the cellular environment, for example, in response to a pH change. Here, we report the preparation of diblock copolypeptides that self-assemble into spherical vesicular assemblies whose size and structure are dictated primarily by the ordered conformations of the polymer segments, in a manner similar to viral capsid assembly. Furthermore, functionality was incorporated into these molecules to render them susceptible to environmental stimuli, which is desirable for drug-delivery applications. The control of assembly and function exhibited in these systems is a significant advance towards the synthesis of materials that can mimic the precise three-dimensional assembly found in proteins.

Biosynthesis of epsilon-poly-L-lysine in a cell-free system of Streptomyces albulus

epsilon-Poly-L-lysine (epsilon-PL) is a homo-poly-amino acid characterized by a peptide bond between carboxyl and epsilon-amino groups of L-lysine. Here we report the cell-free synthesis of epsilon-PL by a sensitive radioisotopic epsilon-PL assay system. In vitro epsilon-PL synthesis depended on ATP and was not affected by ribonuclease, kanamycin, or chloramphenicol. epsilon-PL synthesizing activity was detected in the membrane fraction. The reaction product, epsilon-PL, from L-lysine was identified by MALDI-TOF MS and the number of lysine residues of the epsilon-PL products was apparently 11-34. These results suggest that the biosynthesis of epsilon-PL is nonribosomal peptide synthesis and is catalyzed by membrane bound enzyme(s). The enzyme preparation showing the epsilon-PL synthesizing activity also catalyzed lysine-dependent AMP production and an ATP-PPi exchange reaction, suggesting that L-lysine is adenylated in the first step of epsilon-PL biosynthesis.

Methodologies for preparation of synthetic block copolypeptides: materials with future promise in drug delivery

This article summarizes recent developments in the synthesis of copolypeptides, focusing on the realization of living polymerizations that allow preparation of materials with excellent attributes for drug delivery. Traditional methods used to polymerize alpha-amino acid-N-carboxyanhydrides (NCAs) are described, and limitations in the utility of these systems for the preparation of polypeptides are discussed. A system utilizing transition metal catalysis for polypeptide synthesis is described that allows preparation of materials that begin to rival biologically produced counterparts in terms of complexity and purity. Overall, new developments in NCA and beta-lactam polymerizations hold tremendous promise now that block copolypeptides of controlled dimensions (molecular weight, sequence, composition, and molecular weight distribution) can be prepared. Such well-defined polymers should greatly assist in the development of new drug carriers with increased function.