Two-component systems of Mycobacterium tuberculosis: structure-based approaches

Dual functioning by the PhoR sensor is a key determinant to Mycobacterium tuberculosis virulence

PhoP-PhoR, one of the 12 two-component systems (TCSs) that empower M. tuberculosis to sense and adapt to diverse environmental conditions, remains essential for virulence, and therefore, represents a major target to develop novel anti-TB therapies. Although both PhoP and PhoR have been structurally characterized, the signal(s) that this TCS responds to remains unknown. Here, we show that PhoR is a sensor of acidic pH/high salt conditions, which subsequently activate PhoP via phosphorylation. In keeping with this, transcriptomic data uncover that acidic pH- inducible expression of PhoP regulon is significantly inhibited in a PhoR-deleted M. tuberculosis. Strikingly, a set of PhoP regulon genes displayed a low pH-dependent activation even in the absence of PhoR, suggesting the presence of non-canonical mechanism(s) of PhoP activation. Using genome-wide interaction-based screening coupled with phosphorylation assays, we identify a non-canonical mechanism of PhoP phosphorylation by the sensor kinase PrrB. To investigate how level of P~PhoP is regulated, we discovered that in addition to its kinase activity PhoR functions as a phosphatase of P~PhoP. Our subsequent results identify the motif/residues responsible for kinase/phosphatase dual functioning of PhoR. Collectively, these results uncover that contrasting kinase and phosphatase functions of PhoR determine the homeostatic mechanism of regulation of intra-mycobacterial P~PhoP which controls the final output of the PhoP regulon. Together, these results connect PhoR to pH-dependent activation of PhoP with downstream functioning of the regulator. Thus, PhoR plays a central role in mycobacterial adaptation to low pH conditions within the host macrophage phagosome, and a PhoR-deleted M. tuberculosis remains significantly attenuated in macrophages and animal models.

The pathogenic mechanism of Mycobacterium tuberculosis: implication for new drug development

Mycobacterium tuberculosis (Mtb), the causative agent of tuberculosis (TB), is a tenacious pathogen that has latently infected one third of the world's population. However, conventional TB treatment regimens are no longer sufficient to tackle the growing threat of drug resistance, stimulating the development of innovative anti-tuberculosis agents, with special emphasis on new protein targets. The Mtb genome encodes ~4000 predicted proteins, among which many enzymes participate in various cellular metabolisms. For example, more than 200 proteins are involved in fatty acid biosynthesis, which assists in the construction of the cell envelope, and is closely related to the pathogenesis and resistance of mycobacteria. Here we review several essential enzymes responsible for fatty acid and nucleotide biosynthesis, cellular metabolism of lipids or amino acids, energy utilization, and metal uptake. These include InhA, MmpL3, MmaA4, PcaA, CmaA1, CmaA2, isocitrate lyases (ICLs), pantothenate synthase (PS), Lysine-ε amino transferase (LAT), LeuD, IdeR, KatG, Rv1098c, and PyrG. In addition, we summarize the role of the transcriptional regulator PhoP which may regulate the expression of more than 110 genes, and the essential biosynthesis enzyme glutamine synthetase (GlnA1). All these enzymes are either validated drug targets or promising target candidates, with drugs targeting ICLs and LAT expected to solve the problem of persistent TB infection. To better understand how anti-tuberculosis drugs act on these proteins, their structures and the structure-based drug/inhibitor designs are discussed. Overall, this investigation should provide guidance and support for current and future pharmaceutical development efforts against mycobacterial pathogenesis.

Structural Annotation of the Mycobacterium tuberculosis Proteome

Efforts from the TB Structural Genomics Consortium together with those of tuberculosis structural biologists worldwide have led to the determination of about 350 structures, making up nearly a tenth of the pathogen's proteome. Given that knowledge of protein structures is essential to obtaining a high-resolution understanding of the underlying biology, it is desirable to have a structural view of the entire proteome. Indeed, structure prediction methods have advanced sufficiently to allow structural models of many more proteins to be built based on homology modeling and fold recognition strategies. By means of these approaches, structural models for about 2,877 proteins, making up nearly 70% of the Mycobacterium tuberculosis proteome, are available. Knowledge from bioinformatics has made significant inroads into an improved annotation of the M. tuberculosis genome and in the prediction of key protein players that interact in vital pathways, some of which are unique to the organism. Functional inferences have been made for a large number of proteins based on fold-function associations. More importantly, ligand-binding pockets of the proteins are identified and scanned against a large database, leading to binding site-based ligand associations and hence structure-based function annotation. Near proteome-wide structural models provide a global perspective of the fold distribution in the genome. New insights about the folds that predominate in the genome, as well as the fold combinations that make up multidomain proteins, are also obtained. This chapter describes the structural proteome, functional inferences drawn from it, and its applications in drug discovery.

Serine 83 in DosR, a response regulator from Mycobacterium tuberculosis, promotes its transition from an activated, phosphorylated state to an inactive, unphosphorylated state

A sensor kinase, DosS, and its corresponding response regulator, DosR, constitute a two component system for regulating gene expression under hypoxic conditions in Mycobacterium tuberculosis. Among response regulators in M. tuberculosis, NarL has high sequence similarity to DosR, and autophosphorylated DosS transfers its phosphate group not only to DosR but also to NarL. Phosphorylated DosR is more rapidly dephosphorylated than phosphorylated NarL. DosR and NarL differ with respect to the amino acids at positions T+1 and T+2 around the phosphorylation sites in the N-terminal phosphoacceptor domain; NarL has S83 and Y84, whereas DosR has A90 and H91. A DosR S83A mutant shows prolonged phosphorylation. Structural comparison with a histidinol phosphate phosphatase suggests that the hydroxyl group of DosR S83 could play a role in activating the water molecule involved in the triggering of autodephosphorylation.

Activation of ATP binding for the autophosphorylation of DosS, a Mycobacterium tuberculosis histidine kinase lacking an ATP lid motif

The sensor histidine kinases of Mycobacterium tuberculosis, DosS and DosT, are responsible for sensing hypoxic conditions and consist of sensor and kinase cores responsible for accepting signals and phosphorylation activity, respectively. The kinase core contains a dimerization and histidine phosphate-accepting (DHp) domain and an ATP binding domain (ABD). The 13 histidine kinase genes of M. tuberculosis can be grouped based on the presence or absence of the ATP lid motif and F box (elements known to play roles in ATP binding) in their ABDs; DosS and DosT have ABDs lacking both these elements, and the crystal structures of their ABDs indicated that they were unsuitable for ATP binding, as a short loop covers the putative ATP binding site. Although the ABD alone cannot bind ATP, the kinase core is functional in autophosphorylation. Appropriate spatial arrangement of the ABD and DHp domain within the kinase core is required for both autophosphorylation and ATP binding. An ionic interaction between Arg(440) in the DHp domain and Glu(537) in the short loop of the ABD is available and may open the ATP binding site, by repositioning the short loop away from the site. Mutations at Arg(440) and Glu(537) reduce autophosphorylation activity. Unlike other histidine kinases containing an ATP lid, which protects bound ATP, DosS is unable to accept ATP until the ABD is properly positioned relative to the histidine; this may prevent unexpected ATP reactions. ATP binding can, therefore, function as a control mechanism for histidine kinase activity.

[Adaptive changes of Mycobacterium tuberculosis gene expression during the infectious process]

Mycobacterium tuberculosis causes an infection in humans with clinical manifestations varying from asymptomatic carriage of bacteria to rapidly progressing tuberculosis. Infection outcomes depend on complex and still not fully understood interactions between the pathogenic bacteria and their host organism. Gene expression changes in response to host defense mechanisms are needed for M. tuberculosis survival and functioning. This review focuses on the analysis of dynamic changes in the M. tuberculosis transcriptome taking place during infection processes in host tissues. Presently available data on mycobacterial transcriptome changes obtained from different infection models are discussed. A major part of this review is devoted to the description of biochemical changes occurring in M. tuberculosis infection process, from the primary through latent infection to pathogen reactivation. At each stage of the infection, gene expression changes and induced bacterial metabolic variations are discussed.

The sensor region of the ubiquitous cytosolic sensor kinase, PdtaS, contains PAS and GAF domain sensing modules

Two-component systems, a sensor histidine kinase (HK) and a response regulator (RR), are ubiquitous signaling systems that allow prokaryotes to respond to external challenges. HKs normally have sensing modules and highly conserved cytosolic histidine kinase and ATPase domains. The interaction between the activated phosphohistidine and the cognate RR allows an external signal to be passed from the exterior of gram-positive bacteria (GPB) to the cytoplasm. Orthologs of the PdtaS/PdtaR regulatory system, found in most GPB phyla, are unusual in two respects. The HK is not membrane anchored, and the RR acts at the level of transcriptional antitermination. The structure of the complete sensor region of the cytosolic HK, PdtaS, from Mycobacterium tuberculosis consists of closely linked GAF and PAS domains. The structure and sequence analysis suggest that the PdtaS/PdtaR regulatory system is structurally equivalent to the EutW/EutV system regulating ethanolamine catabolism in some phyla but that the effector for the PAS domain is not ethanolamine in the Actinobacteria.

Structure of the response regulator PhoP from Mycobacterium tuberculosis reveals a dimer through the receiver domain

The PhoP protein from Mycobacterium tuberculosis is a response regulator of the OmpR/PhoB subfamily, whose structure consists of an N-terminal receiver domain and a C-terminal DNA-binding domain. How the DNA-binding activities are regulated by phosphorylation of the receiver domain remains unclear due to a lack of structural information on the full-length proteins. Here we report the crystal structure of the full-length PhoP of M. tuberculosis. Unlike other known structures of full-length proteins of the same subfamily, PhoP forms a dimer through its receiver domain with the dimer interface involving α4-β5-α5, a common interface for activated receiver domain dimers. However, the switch residues, Thr99 and Tyr118, are in a conformation resembling those of nonactivated receiver domains. The Tyr118 side chain is involved in the dimer interface interactions. The receiver domain is tethered to the DNA-binding domain through a flexible linker and does not impose structural constraints on the DNA-binding domain. This structure suggests that phosphorylation likely facilitates/stabilizes receiver domain dimerization, bringing the DNA-binding domains to close proximity, thereby increasing their binding affinity for direct repeat DNA sequences.

Physiology of mycobacteria

Mycobacterium tuberculosis is a prototrophic, metabolically flexible bacterium that has achieved a spread in the human population that is unmatched by any other bacterial pathogen. The success of M. tuberculosis as a pathogen can be attributed to its extraordinary stealth and capacity to adapt to environmental changes throughout the course of infection. These changes include: nutrient deprivation, hypoxia, various exogenous stress conditions and, in the case of the pathogenic species, the intraphagosomal environment. Knowledge of the physiology of M. tuberculosis during this process has been limited by the slow growth of the bacterium in the laboratory and other technical problems such as cell aggregation. Advances in genomics and molecular methods to analyze the M. tuberculosis genome have revealed that adaptive changes are mediated by complex regulatory networks and signals, resulting in temporal gene expression coupled to metabolic and energetic changes. An important goal for bacterial physiologists will be to elucidate the physiology of M. tuberculosis during the transition between the diverse conditions encountered by M. tuberculosis. This review covers the growth of the mycobacterial cell and how environmental stimuli are sensed by this bacterium. Adaptation to different environments is described from the viewpoint of nutrient acquisition, energy generation, and regulation. To gain quantitative understanding of mycobacterial physiology will require a systems biology approach and recent efforts in this area are discussed.

1.9 A structure of the signal receiver domain of the putative response regulator NarL from Mycobacterium tuberculosis

NarL from Mycobacterium tuberculosis is a putative nitrate response regulator that is involved in the regulation of anaerobic metabolism in this pathogen. The recombinant purified N-terminal signal receiver domain of NarL has been crystallized in space group C222(1), with unit-cell parameters a = 85.6, b = 90.0, c = 126.3 A, and the structure was determined by molecular replacement to 1.9 A resolution. Comparisons with related signal receiver domains show that the closest structural homologue is an uncharacterized protein from Staphylococcus aureus, whereas the nearest sequence homologue, NarL from Escherichia coli, displays larger differences in three-dimensional structure. The largest differences between the mycobacterial and E. coli NarL domains were found in the loop between beta3 and alpha3 in the proximity of the phosphorylation site. The active site in response regulators is similar to that of members of the haloacid dehalogenase (HAD) family, which also form a phospho-aspartyl intermediate. In NarL, the aspartic acid that acts as catalytic acid/base in several HAD enzymes is replaced by an arginine residue, which is less likely to participate in steps involving proton abstraction. This substitution may slow down the breakdown of the phospho-aspartyl anhydride and allow signalling beyond the timescales defined by a catalytic reaction intermediate.