Bacterial leakage of mineral trioxide aggregate as a root-end filling material

The Management of Open Apex Using a Bioactive Material: A Case Report

The management of teeth with open apices poses unique challenges in endodontics, requiring effective strategies to promote continued root development and maintain pulp vitality. This abstract explores the utilization of bioactive materials in the treatment of open apices, specifically focusing on their role in achieving optimal outcomes. Bioactive materials, such as Biodentine (Septodont, Saint-Maur-des-Fossés, France), have gained prominence for their favourable physiochemical properties, biocompatibility, and ability to stimulate dentinogenesis. The application of a bioactive material as an apical plug not only addresses immediate concerns but also contributes to long-term health and stability. This abstract reviews relevant literature, discusses clinical cases, and emphasizes the importance of tailoring treatment plans to the individual characteristics of open apex cases. The findings underscore the promising role of bioactive materials in reshaping the landscape of endodontic interventions for teeth with open apices, highlighting their potential to enhance both clinical and radiographic success.

Management of a Radicular Cyst in Anterior Maxilla With Endosurgical Intervention Along With Use of Mineral Trioxide Aggregate (MTA) and Bone Graft: A Case Report

Radicular cysts are the most common cystic lesions that affect the jaws, which, though mostly asymptomatic, can be seen radiographically as an oval or pear-shaped unilocular radiolucency in the periapical region. Nonsurgical root canal procedures and periapical surgery followed by placement of bone substitute and bioceramic root-end filling material is generally the treatment of choice. This case report highlights the endosurgical management of long-standing trauma that led to a radicular cyst with respect to three maxillary anterior teeth in a young adult. The clinical and radiographic examination led to a provisional diagnosis of a radicular cyst, which was confirmed by biopsy. Non-surgical root canal treatment was performed with Mineral Trioxide Aggregate (MTA) as the apical barrier and surgical enucleation of the cyst was performed followed by placement of hydroxyapatite bone graft. Follow-ups till two years were done, which revealed the successful management of the case.

Microleakage of Restorative Materials Used for Temporization of Endodontic Access Cavities

A tight temporary seal applied to an access cavity is thought to improve endodontic outcomes. This study aims to assess the bacterial and glucose microleakage of different types and combinations of temporary restorations. Human-extracted incisors were instrumented, dressed with a calcium hydroxide paste, and sealed with Cavit W (CW), CW/Ketac Molar (CW/KM), CW/Smart Dentin Replacement (CW/SDR), Intermediate restorative material/KM (IRM/KM), or Clip F (CF). Standardized 3D-printed hollow test specimens were manufactured and temporized in the same manner. The specimens were examined for bacterial and glucose leakage for 28 days. Data were analyzed using a Kaplan-Meier survival analysis. CW/SDR and CF showed the least bacterial and glucose leakage over time. CW, CW/KM, and IRM/KM had similarly high levels of glucose leakage, but CW/KM and IRM/KM provided a tighter seal against bacterial penetration than CW. CW/SDR and CF should be considered for the sealing of access cavities of teeth previously restored with methacrylate-based materials.

Comparison of the Microleakages of Four Root-End Filling Materials: An In Vitro Study

INTRODUCTION

When a nonsurgical endodontic treatment is ineffective, surgery is necessary. This entails putting a retrofilling to seal the tooth's apex. Exposing the lesion, performing a curettage, exposing the root apex, resecting it, preparing the root end, and lastly filling the cavity with the proper material are all steps in endodontic surgery. Thus, the aim of this study is to compare the apical microleakage of four root-end filling materials in cavities prepared using ultrasonic retro tip in in vitro conditions.

MATERIALS AND METHODS

An in vitro study was conducted on 60 extracted single-rooted teeth and was cut at the cementoenamel junction (CEJ). They were biomechanically prepared and obturated. Apical 3 mm root-end resection was done using a diamond disc. Root-end cavities were made using an ultrasonic retro tip. Teeth were separated into four groups and filled with SuperEBA^®️ ethoxy-benzoic acid (EBA; Keystone Industries, New Jersey), mineral trioxide aggregate (MTA), Biodentine (Septodont, France), and TotalFill Bioceramic Root Repair Material (BC RRM; FKG Dentaire Sàrl, Switzerland). The samples were kept in methylene blue dye and split longitudinally. The degree of dye penetration was observed under a stereomicroscope and scored. Finally, the results were analyzed.

RESULTS

TotalFill BC RRM and Biodentine showed the least apical microleakage (p <0.05). Group 1 samples had the highest mean microleakage, followed by Group 2, Group 3, and Group 4 samples.

CONCLUSION

All of the sample groups showed some evidence of microleakage, but not all of the samples showed leaking. SuperEBA (Group 1) demonstrated the highest microleakage when compared to the other groups.

In vitro evaluation of the sealing ability of combined use of iRoot BP Plus and iRoot SP for root-end filling

OBJECTIVES

The aim of this in vitro study was to evaluate the sealing ability of combined application of iRoot BP Plus Root Repair Material (BP-RRM) and iRoot SP Injectable Root Canal Sealer (SP-RCS) for root-end filling.

MATERIAL AND METHODS

A total of 120 extracted human teeth were used in this study and were randomly divided into four groups. The BP-RRM+SP-RCS group included teeth retro-filled with combined use of BP-RRM and SP-RCS (n=45), and the BP-RRM group included teeth retro-filled by BP-RRM alone (n=45). Teeth without root-end preparation and filling were equally divided into positive control (n=15) and negative control (n=15). The apical sealing ability was evaluated by micro-CT analysis, dye penetrant examination, bacterial leakage test, and glucose leakage test.

RESULTS

Micro-CT analysis showed that the total void fraction of BP-RRM+SP-RCS group was significantly lower than that of BP-RRM group, particularly at the coronal 1/3 segment of the retro-filled roots. Consistently, the maximum linear depth of dye leakage in BP-RRM+SP-RCS group was less than that of BP-RRM group. Bacterial leakage test showed that the microbial leakage in BP-RRM+SP-RCS group was significantly less than that in BP-RRM group. However, no significant difference in glucose leakage between BP-RRM+SP-RCS group and BP-RRM group was observed.

CONCLUSION

Combined use of BP-RRM and SP-RCS for root-end filling promotes apical sealing in vitro.

CLINICAL RELEVANCE

Combined use of BP-RRM and SP-RCS for root-end filling exhibited better apical sealing as compared to BP-RRM alone in vitro, and this may help reducing technical sensitivity and promoting clinical efficiency during endodontic microsurgery.

An in vitro evaluation of antimicrobial activity of a fast-setting endodontic material

The aim of this study is to evaluate the antimicrobial activity of the fast-setting iRoot Fast Set Root Repair Material (iRoot FS), Mineral trioxide aggregate (MTA) and Biodentine. The materials were freshly mixed or set for 1 and 7 days to conduct the agar diffusion test, direct contact test and carry-over effect test against E. faecalis and P. gingivalis, and the pH values were also measured. The data were analyzed by an analysis of variance and one-way ANOVA or Dunnett's T3 test, and the Tukey's post hoc test for multiple comparisons (α = 0.05). In the direct contact test, all three materials showed good antibacterial activity after setting for 20 min. The antibacterial properties of the three materials decreased with the increase of setting time (p < 0.05). The suspension of all the three materials showed high pH values (11-12) and no significant difference was observed (p > 0.05). With the extension of setting time, the pH of iRoot FS and Biodentine slightly decreased (p < 0.05). Fresh iRoot FS, Biodentine, and MTA killed E. faecalis and P. gingivalis effectively, but their antimicrobial effect decreased after 24 h, and distinctly decreased after 7 days after mixing. iRoot FS, Biodentine, and MTA showed a tendency of alkalinity during this 7-day experiment.

Dislodgement pushout resistance of five bioceramic root-end filling materials

This study evaluated the dislodgement push-out resistance of five bioceramic materials. One hundred single-rooted teeth with one canal had the apical 3 mm and crown resected to create a 14 mm standardized length. The canals were instrumented to an apical size 80 with a 3 mm root-end preparation made with ultrasonic diamonds. The prepared roots were randomly divided into 5 root-end restorative groups (n=20). ProRoot MTA, Biodentine, EndoSequence Root Repair Material, EndoSequence Fast Set Putty, and EndoSequence BC Sealer with each material placed following manufacturer's instructions and stored at 100% humidity for 2 weeks. An apical-to-coronal static testing load with the identified dislodgement force converted into MPa with mean results analyzed with Kruskal-Wallis and Dunn's post hoc tests (α=0.05). ProRoot MTA and Biodentine displayed similar push-out stress resistance and exhibited significantly greater stress resistance than the similar Endosequence materials. However, all materials failed cohesively and were not dislodged from the root canal surface.

Present Status and Future Directions - Surgical Endodontics

Endodontic surgery encompasses several procedures for the treatment of teeth with a history of failed root canal treatment, such as root-end surgery, crown- and root resections, surgical perforation repair, and intentional replantation. Endodontic microsurgery is the evolution of the traditional apicoectomy techniques and incorporates high magnification, ultrasonic root-end preparation and root-end filling with biocompatible filling materials. Modern endodontic surgery uses the dental operating microscope, incorporates cone-beam computed tomography (CBCT) for preoperative diagnosis and treatment planning, and has adopted piezoelectric approaches to osteotomy and root manipulation. Crown- and root resection techniques have benefitted from the same technological advances. This review focuses on the current state of root-end surgery by comparing the techniques and materials applied during endodontic microsurgery to the most widely used earlier methods and materials. The most recent additions to the clinical protocol and technical improvements are discussed, and an outlook on future directions is given. While non-surgical retreatment remains the first choice to address most cases with a history of endodontic failure, modern endodontic microsurgery has become a predictable and minimally invasive alternative for the retention of natural teeth.

A comprehensive in vitro comparison of the biological and physicochemical properties of bioactive root canal sealers

OBJECTIVES

To evaluate the biological and physicochemical features of bioactive root canal sealers.

MATERIALS AND METHODS

Human periodontal ligament fibroblasts (hPDLF) and human osteoblasts (hOB) were exposed to eluates of three bioactive root canal sealers, GuttaFlow® bioseal (GF), BioRoot™ RCS (BR), and TotalFill® BC Sealer (TF), and the epoxy resin-based sealer AH plus® (AH). Cytotoxicity and cellular inflammatory response were evaluated. The osteogenic potential was examined using human mesenchymal stem cells (hMSC). Film thickness, flowability, and pH were assessed. Root canal treatment was performed on human extracted teeth to evaluate the sealers' tightness towards bacterial penetration. The antibacterial activity against common pathogens in primary root canal infections was tested.

RESULTS

AH was severely cytotoxic to hPDLF and hOB (p < 0.001). The bioactive sealers were generally less cytotoxic. IL-6 levels in hPDLF were elevated in the presence of AH (p < 0.05). AH and GF suppressed IL-6 production in hOB (p < 0.05). AH and BR stimulated the PGE₂ production in hPDLF and hOB (p < 0.05). BR was the only sealer that led to calcium deposits in hMSC (p < 0.05). TF and AH showed the lowest film thickness and the highest flowability. Bacterial tightness was best in teeth filled with AH and BR. All sealers showed similar antimicrobial activity, but the overall antimicrobial efficacy was moderate as the bacteria were reduced by just one log scale (p < 0.05).

CONCLUSIONS

This study revealed favorable in vitro results regarding the biocompatibility of the bioactive root canal sealers.

CLINICAL RELEVANCE

Bioactive root canal sealers may be a useful alternative to epoxy resin-based sealers.

Marginal gaps and internal voids after root-end filling using three calcium silicate-based materials: A Micro-CT analysis

This study evaluated the 3D quality of root-end filling, assessing the presence (volume and percentage) of marginal gaps and internal voids formed after retro-filling with three calcium silicate-based materials: MTA Angelus (Angelus Soluçoes Odontologicas, Londrina, PR, Brazil), Biodentine (Septodont Ltd., Saint Maur-des-Faussés, France) and Neo MTA Plus (Avalon Biomed Inc., Bradenton, Florida, US). Thirty human, extracted, single rooted teeth were used. Orthograde root canal treatment, root resection (3mm shorter than the apex) and retrograde cavity preparation with ultrasonic tips were performed. Teeth were divided into 3 groups (n =10 each) following a stratified randomization according to the initial volume of the root-end cavity. After retrofilling, samples were stored for 7 days. Then, two rounds of micro-CT scans were performed: soon after root-end preparation (with the cavity still empty) and 7 days after root-end filling. Marginal gaps, internal voids volume (mm3 and %), as well as, the overall defects (sum of gaps and voids) were evaluated. Statistics compared the three groups in relation to those defects. There was not statistical difference between groups regarding the marginal gaps (P≥ 0.05), the internal voids (P≥ 0.05), and the overall defects (P≥ 0.05). Median (mm3) and % of overall air-entrapment defects (gaps and/or voids) was: 0.004mm3 and 1.749% for MTA Angelus, 0.018mm3 and 6.660% for Biodentine, and 0.012mm3 and 4.079% for Neo MTA Plus. All materials had gaps and/or voids. No differences were found between MTA Angelus, Biodentine and Neo MTA Plus.

Mineral trioxide aggregate immersed in sodium hypochlorite reduce the osteoblastic differentiation of human periodontal ligament stem cells

White mineral trioxide aggregate (WMTA) is a root canal treatment material, which is known to exhibit a dark brown color when in contact with sodium hypochlorite solution (NaOCl). This study aimed to investigate the effects of NaOCl on the surface properties of WMTA discs and WMTA-induced osteoblastic differentiation of periodontal ligament stem cells (PDLSCs). Mixed WMTA (ProRoot MTA) was filled into the molds to form WMTA discs. These discs were immersed in distilled water (D-WMTA) or 5% NaOCl (Na-WMTA). Their surface structures and Ca²⁺ release level was investigated. Moreover, they were cultured with a clonal human PDLSC line (line 1–17 cells). The main crystal structures of Na-WMTA were identical to the structures of D-WMTA. Globular aggregates with polygonal and needle-like crystals were found on D-WMTA and Na-WMTA, which included Ca, Si, Al, C and O. However, many amorphous structures were also identified on Na-WMTA. These structures consisted of Na and Cl, but did not include Ca. NaOCl immersion also reduced Ca²⁺ release level from whole WMTA discs. Line 1–17 cells cultured with D-WMTA formed many mineralized nodules and exhibited high expression levels of osteoblast-related genes. However, cells incubated with Na-WMTA generated a small number of nodules and showed low expression levels of osteoblast-related genes. These results indicated that NaOCl reduced Ca²⁺ release from WMTA by generating amorphous structures and changing its elemental distribution. NaOCl may also partially abolish the ability of WMTA to stimulate osteoblastic differentiation of PDLSCs.

Sealing Efficiency of MTA, Accelerated MTA, Biodentine and RMGIC as Retrograde Filling Materials

Background/Aim: This in-vitro study evaluated the apical-sealing ability of MTA, MTA+10% CaCl2, Biodentine™ and RMGIC when used as retrograde material.

Material and Methods: A total of 80 single-rooted bovine incisors were decoronated, instrumented, and divided into 4 groups according to retrograde material, as follows: Group 1: MTA (ProRoot MTA, Dentsply); Group 2: MTA (ProRoot MTA, Dentsply) + 10% CaCl2; Group 3: Biodentine (Biodentine®, Septodont); Group 4: RMGIC (Nova Glass -LC, Imicryl). Root surfaces were isolated with nail polish, and teeth were immersed in 2% methylene blue dye at 37°C for 48 h. The extent of dye penetration (mm) was measured under a stereomicroscope.

Results: RMGIC had the highest mean-rank dye penetration score (MP=49.05), followed by MTA (MP=43.65), Biodentine (35.95) and MTA+CaCl2 (MP=33.35). The results of paired comparison tests found the mean microleakage value of MTA+10% CaCl2 and Biodentine (Group 3) to be significantly lower than that of RMGIC (respectively; p=0,020, p=0,019). No significant difference was found in the other group comparisons (p> 0.05).

Conclusions: These results suggest that the addition of an accelerator to MTA may reduce microleakage following endodontic surgery. Biodentine can be used as an alternative to MTA on retrograde obturation.

Biomaterials in periapical regeneration after microsurgical endodontics: A narrative review

Background

The objective of this narrative review was to analyze the available scientific evidence regarding the application of biomaterials in endodontic microsurgery and its influence in post-surgical tissue repair.

Material and Methods

The review question was Do biomaterials used in endodontic microsurgery influence post-surgical tissue repair and regeneration? Systematic MEDLINE/PubMed review was used to evaluate and present the results.

Results

The search yielded 131 references, 82 of which were selected for full text review after reading the abstracts. After a manual search in the references of the articles selected, 52 references were eliminated. Finally, 30 articles were selected.

Conclusions

Bone grafts, membranes and bioceramics, especially MTA, are biomaterials with the ability to stimulate periapical tissue regeneration. This is one of many reason why bioceramics are the best choice as retrograde sealing materials. However, microsurgically treated periapical lesions can heal completely without the need to use bone grafts or membranes. Those techniques are indicated in endodontic microsurgery when additional stimulation of tissue regeneration is required, or when bone collapse needs to be prevented.

Key words:Bioactive endodontic cements, endodontic surgery, periapical repair.

Marginal gaps and voids of three root-end filling materials: A microcomputed tomographic study

A root-end filling material is required to fill the root-end cavity without gaps or voids, to prevent root canal reinfection and to provide periapical healing. Thus, this study evaluated the volume of marginal gaps and voids of three root-end filling materials using microcomputed tomography (micro-CT). Thirty maxillary incisors were prepared and filled with gutta-percha and endodontic sealer. The specimens were scanned using micro-CT and distributed into three groups (n = 10): White MTA, MTA Repair HP, and Bio-C Repair. The root tips were resected at 90° to the longitudinal axis and the cavity (3 mm depth) was prepared with an ultrasonic tip. The materials were handled, and the cavities were filled. The specimens were rescanned and the percentual volume of gaps and voids were analyzed. The data were analyzed using Kruskal-Wallis and Dunn tests (p < .05). No statistical difference was found in the percentage of gaps among the tested materials (p > .05). White MTA presented less voids than Bio-C and MTA Repair HP (p < .05). The materials presented a similar percentual volume of gaps and White MTA presented less voids than other tested materials.

Comparison of Obturation Quality after MTA Orthograde Filling with Various Obturation Techniques

This study aimed to quantify and compare the obturation quality after mineral trioxide aggregate (MTA) orthograde fillings with three different obturation techniques. Thirty-three extracted human maxillary molars were collected. Distobuccal and palatal canals were prepared to an apical size of #40/06 with a Profile Ni-Ti system. All 66 canals were divided into two groups according to the material (EZ-seal or OrthoMTA) and then obturated using three different techniques: manual compaction using S-kondenser (group H), compactor activation (group C), or reverse rotary motion of Ni-Ti file (group R). The obturated roots were scanned using micro-computed tomography (micro-CT). The percentage of voids located in the apical 5 mm was measured separately, that is, closed, open, and total porosity. There was no relation between the filling material and obturation technique (p > 0.05). The percentage volume of open and total porosity was higher in EZ-seal than in OrthoMTA (open: p = 0.002, total: p = 0.001). Group H showed higher open and total porosity than groups C and R. Micro-CT analysis showed that the void volume after orthograde MTA fillings significantly decreased when the additional activation was accompanied by hand condensation. Obturation with a Ni-Ti file using reverse motion could be recommended as an MTA orthograde filling technique.

Physical, Chemical, Mechanical, and Biological Properties of Four Different Commercial Root-End Filling Materials: A Comparative Study

Commercial mineral trioxide aggregate (MTA) materials such as Endocem MTA (EC), Dia-Root Bio MTA (DR), RetroMTA (RM), and ProRoot MTA (PR) are increasingly used as root-end filling materials. The aim of this study was to assess and compare the physicochemical and mechanical properties and cytotoxicity of these MTAs. The film thicknesses of EC and DR were considerably less than that of PR; however, RM’s film thickness was greater than that of PR. In addition, the setting times of EC, DR, and RM were shorter than that of PR (p < 0.05). The solubility was not significantly different among all groups. The three relatively new MTA groups (EC, DR, and RM) exhibited a significant difference in pH variation and calcium ion release relative to the PR group (p < 0.05). The radiopacity of the three new MTAs was considerably less than that of PR. The mechanical strength of RM was not significantly different from that of PR (p > 0.05); however, the EC and DR groups were not as strong as PR (p < 0.05). All MTA groups revealed cytocompatibility. In conclusion, the results of this study confirmed that EC, RM, DR, and PR exhibit clinically acceptable physicochemical and mechanical properties and cell cytotoxicity.

Sealing ability of three different root repair materials for furcation perforation repair: An in vitro study

Aim

The present study aimed to evaluate and compare the sealing ability of mineral trioxide aggregate (MTA)-Angelus, Biodentine™, and EndoSequence cement in furcation perforations using protein leakage assessment.

Materials and Methods

The present study was conducted using seventy extracted human maxillary and mandibular molars with intact furcation. The samples were randomly allocated into three groups (n = 20) based on repair material used: Group 1 - MTA-Angelus, Group 2 - Biodentine™, and Group 3 - EndoSequence. Two additional groups served as positive and negative controls (n = 5). Using the leakage assessment apparatus, the presence of protein was detected with a reagent (Coomassive Brilliant Blue) every day for 60 days. One-way ANOVA and post hoc Tukey's test were used for statistical analysis using SPSS software.

Results

All the groups exhibited protein leakage from day 1. Biodentine showed minimum (0.1201 mg/ml), MTA showed maximum (0.3738 mg/ml), and EndoSequence had intermediate (0.2465 mg/ml) leakage. None in the negative control and all of the positive control specimens leaked during the experimental period of 60 days.

Conclusion

The newer biomaterials, Biodentine and Endosequence with better handling properties, could be used as alternatives to MTA-Angelus while repairing furcation perforations.

Comparative evaluation of volumetric changes of three different retrograde calcium silicate materials placed under different pH condititions

BACKGROUND

The present study aimed to compare the volumetric changes of three calcium silicate cements after retrofilling and placing under different pH conditions via micro-computed tomography (micro-CT) scan.

METHODS

Forty-two extracted human single-rooted teeth were randomly assigned to three groups according to the retrofilling materials used (Biodentine, Endocem MTA, and ProRoot MTA). Each group was divided into two subgroups according to the setting condition. The teeth in one group were immersed in normal saline for 5 days at room temperature, and the teeth in the other group were immersed in butyric acid (pH = 5.4) for 5 days at room temperature. The volume ratios of the retrofilling material were calculated via micro-CT imaging.

RESULTS

The volume ratios of the Biodentine and Endocem MTA groups were significantly different between the two setting environment, and these groups had significantly lower filled volume ratio (Vf, %) in the acidic environment than in the saline environment (pH = 5.4). Meanwhile, the volume ratio of the ProRoot MTA group did not significantly differ between the two setting environments. All materials under the acidic setting condition had relative radiolucency in the area in contact with the acidic solution.

CONCLUSION

The Vf ratio of the Biodentine and Endocem MTA cements was significantly lower in the acidic environment than in the saline environment. No statistically significant difference was observed in the Vf ratio of ProRoot MTA between the two setting environments.

Antimicrobial action of NeoMTA Plus on mono- and dual-species biofilms of Enterococcus faecalis and Candida albicans: An in vitro study

OBJECTIVE

To evaluate the antimicrobial action of NeoMTA Plus on mono- and dual-species biofilms of Enterococcus faecalis and Candida albicans.

MATERIAL AND METHODS

A total of 171 sterile dentin blocks, measuring 4 mm × 4 mm × 1 mm, were incubated in media containing E. faecalis (3.1 × 10⁸ cells/mL) and/or C. albicans (1 × 10⁷ cells/mL) for 2 d. These blocks were randomly divided into three groups: the control (no treatment with biomaterials), MTA (treated with an MTA sample with width and thickness same as those of the dentin block after the material was set), and NeoMTA Plus (treated with NeoMTA Plus in a fashion similar to the treatment of the MTA group) groups. The biomaterials remained in contact with the biofilms for 24 h. Quantitative analyses of the number of colony-forming units (CFUs) and metabolic activity (XTT), were performed. Furthermore, qualitative analysis of biofilm structure was performed by scanning electron microscopy. Data were statistically analyzed considering a significance level of 5%.

RESULTS

XTT and the number of CFUs were similar among the groups (p > 0.05). The type of biofilm (mono- or dual-species) or the biomaterial used (MTA or NeoMTA Plus) did not affect the results. Biofilm structure exhibited a robust architecture composed of yeast and bacterial cell multilayers and was homogeneous among the groups.

CONCLUSION

NeoMTA Plus was not effective against mono- and dual-species biofilms of E. faecalis and C. albicans. Further research investigating biofilm removal methods including those involving the use of biomaterials with antiseptics and other supporting therapies is warranted.

A 3D finite element analysis of stress distribution on different thicknesses of mineral trioxide aggregate applied on various sizes of pulp perforation

OBJECTIVES

The aim of this study was to evaluate the stress distribution on different thicknesses of mineral trioxide aggregate (MTA) placed on various widths of pulp perforations during the condensation of the composite resin material.

MATERIALS AND METHODS

The mandibular molar tooth was modeled by COSMOSWorks program (SolidWorks, Waltham, MA). Three finite elemental analysis models representing 3 different dimensions of pulp perforations, 1, 2, and 3 mm in diameter, were created. The perforation area was assumed as filled with MTA with different thicknesses, 1, 2, and 3 mm for each pulp perforation width, creating a total of 9 different models. Then, a composite resin material was layered on MTA for each model. A 66.7 N load was applied and an engineering simulation program (ANSYS, Canonsburg, US) was used for the analysis. Results were presented considering von Mises stress criteria.

RESULTS

As MTA thickness increased, the stress values recorded within the area between pulp and MTA decreased. Strain was decreased when the thickness of MTA increased.

CONCLUSIONS

Stresses at MTA-pulp interface and strain on MTA decreased with the increase in MTA thickness.

CLINICAL RELEVANCE

In clinical practice, when MTA is required for pulp capping, using a thick layer of the material seems to be a better option in order to reduce the stress under forces of hand condensation of overlying restorative materials.

The Effect of Pulpotomy Base Material on Bacterial Penetration and Proliferation for Pulpotomized Primary Molar Teeth: A Confocal Laser Scanning Microscopy Study

Introduction: the study aimed to evaluate Enterococcus Faecalis colonization in the pulp chamber in pulpotomized extracted human teeth filled by different pulpotomy base materials (PBMs), using confocal laser scanning microscopy (CLSM). Study design: Cavity preparations were made in 70 extracted primary molars. The pulp chambers were filled using either Intermediate restorative material (IRM), Mineral Trioxide Aggregate (MTA) or Glass ionomer (GI). Twenty-five teeth served controls. The specimens were sterilized, and coronally filled with bacterial suspension for 21 days. The specimens were cut through the furcation area, stained using LIVE/DEAD BacLight Bacterial Viability Kit and evaluated using CLSM. Results: The extent of fluorescent staining was larger in the GI group, compared to the IRM and MTA groups, and larger in the IRM group compared to the MTA group (P<0.05). The minimal and maximal bacterial penetration depths into the dentinal tubules were 55 and 695&mu;m, respectively (mean 310&mu;m), without differences between the materials (GI, IRM, MTA, p>0.05). The ratio of live bacteria to dead bacteria within the evaluated areas was higher in the GI group compared to the IRM and the MTA groups, and higher in the IRM group compared to the MTA group (P<0.05). There were no differences between the mesial, distal and apical parts in any of the evaluations (p>0.05). Conclusions: bacteria colonize the interface between the PBM and dentin and penetrate deeply into the dentinal tubules. The extent and the vitality of the colonized bacteria may be affected by the type of PBM.

Bioactive tri/dicalcium silicate cements for treatment of pulpal and periapical tissues

Over 2500 articles and 200 reviews have been published on the bioactive tri/dicalcium silicate dental materials. The indications have expanded since their introduction in the 1990s from endodontic restorative and pulpal treatments to endodontic sealing and obturation. Bioactive ceramics, based on tri/dicalcium silicate cements, are now an indispensable part of the contemporary dental armamentarium for specialists including endodontists, pediatric dentists, oral surgeons andfor general dentists. This review emphasizes research on how these materials have conformed to international standards for dental materials ranging from biocompatibility (ISO 7405) to conformance as root canal sealers (ISO 6876). Potential future developments of alternative hydraulic materials were included. This review provides accurate materials science information on these important materials. STATEMENT OF SIGNIFICANCE: The broadening indications and the proliferation of tri/dicalcium silicate-based products make this relatively new dental material important for all dentists and biomaterials scientists. Presenting the variations in compositions, properties, indications and clinical performance enable clinicians to choose the material most suitable for their cases. Researchers may expand their bioactive investigations to further validate and improve materials and outcomes.

Surface Pre-Reacted Glass Filler Contributes to Tertiary Dentin Formation through a Mechanism Different Than That of Hydraulic Calcium-Silicate Cement

The induction of tissue mineralization and the mechanism by which surface pre-reacted glass-ionomer (S-PRG) cement influences pulpal healing remain unclear. We evaluated S-PRG cement-induced tertiary dentin formation in vivo, and its effect on the pulp cell healing process in vitro. Induced tertiary dentin formation was evaluated with micro-computed tomography (μCT) and scanning electron microscopy (SEM). The distribution of elements from the S-PRG cement in pulpal tissue was confirmed by micro-X-ray fluorescence (μXRF). The effects of S-PRG cement on cytotoxicity, proliferation, formation of mineralized nodules, and gene expression in human dental pulp stem cells (hDPSCs) were assessed in vitro. μCT and SEM revealed that S-PRG induced tertiary dentin formation with similar characteristics to that induced by hydraulic calcium-silicate cement (ProRoot mineral trioxide aggregate (MTA)). μXRF showed Sr and Si ion transfer into pulpal tissue from S-PRG cement. Notably, S-PRG cement and MTA showed similar biocompatibility. A co-culture of hDPSCs and S-PRG discs promoted mineralized nodule formation on surrounding cells. Additionally, S-PRG cement regulated the expression of genes related to osteo/dentinogenic differentiation. MTA and S-PRG regulated gene expression in hDPSCs, but the patterns of regulation differed. S-PRG cement upregulated CXCL-12 and TGF-β1 gene expression. These findings showed that S-PRG and MTA exhibit similar effects on dental pulp through different mechanisms.

Treatment of immature teeth with nonvital pulps in adults: a prospective comparative clinical study comparing MTA with Ca(OH)2

AIM

To evaluate and compare the influence of various predictors on outcomes of apexification using either mineral trioxide aggregate (MTA) or calcium hydroxide (CH) in permanent immature anterior teeth with necrotic pulps and periapical lesions of adults.

METHODOLOGY

Ninety immature teeth with necrotic pulps and periapical lesions on adult patients (aged 18-40 years) were treated with MTA (45 teeth) or CH (45 teeth) between 2015 and 2018. Patients of both groups were recalled for follow-up examinations after the first intervention at 1,3,6 and 12 months for the first year, every 6 months for the second year and every year thereafter until the end of the study (median 32.3 months). The treatment outcome based on clinical and radiographic criteria was assessed by calibrated examiners and dichotomized as 'healed+healing' or 'not healed'. The age, gender, stage of root development, preoperative signs and symptoms of apical periodontitis and size of periapical lesion were recorded. The cumulative success proportion and mean time were analysed with the Kaplan-Meier test. The generalized logrank statistic was used to describe prognostic clinical variables. Fisher's exact test was applied for the evaluation of the healing rates.

RESULTS

Thirty-nine of the 45 teeth treated with MTA were available for recall. Of these, 29 teeth (74%) revealed calcific apical barrier formation with complete resolution of periapical lesions, 7 teeth (18%) were healing, and 3 teeth (8%) had persistent disease. Thirty-four of the 45 teeth in the CH group were available for recall. Of these, 27 teeth (79%) had complete healing of periapical lesions and had calcific barrier formation, 4 teeth (12%) were healing, and the remaining 3 teeth (9%) had not healed. The survival rate of teeth treated with MTA was similar to the survival rates observed in teeth treated with CH (90% and 91%, respectively, P > 0.05). The generalized logrank statistic revealed that the cumulative success rate of both materials was not significantly different (P > 0.05). None of the tested predictors had an influence on the treatment outcomes of teeth in both groups (P > 0.05).

CONCLUSIONS

Apexification with both MTA and CH was associated with similar treatment outcomes. MTA may be proposed as a material for apexification treatment in immature teeth of adult patients due to the shorter treatment time associated with its use.

Regenerative Endodontic Procedures Using Contemporary Endodontic Materials

Calcium hydroxide apexification and Mineral Trioxide Aggregate (MTA) apexification are classical treatments for necrotic immature permanent teeth. The first tend to fail for lack of compliance given the high number of sessions needed; the second has technical difficulties such as material manipulation and overfilling. With both techniques, the root development is interrupted leaving the tooth with a fragile root structure, a poor crown-to-root ratio, periodontal breakdown, and high risk of fracture, compromising long-term prognosis of the tooth. New scientific literature has described a procedure that allows complete root development of these specific teeth. This regenerative endodontic procedure (REP) proposes the use of a combination of antimicrobials and irrigants, no canal walls instrumentation, induced apical bleeding to form a blood clot and a tight seal into the root canal to promote healing. MTA is the most used material to perform this seal, but updated guidelines advise the use of other bioactive endodontic cements that incorporate calcium and silicate in their compositions. They share most of their characteristics with MTA but claim to have fewer drawbacks with regards to manipulation and aesthetics. The purpose of the present article is to review pertinent literature and to describe the clinical procedures protocol with its variations, and their clinical application.

Bacterial leakage and marginal adaptation of various bioceramics as apical plug in open apex model

AIM

The aim of the present study was to investigate bacterial leakage and marginal adaptation of bioceramic apical plugs.

METHODS

Extracted human mandibular premolars were prepared to simulate open apex using No. 4 Peeso reamer in retrograde direction. In total, 150 specimens were divided into 10 groups by obturation with five bioceramics in two thicknesses. Groups 1, 3, 5, 7, and 9 were obturated with ProRootMTA, Biodentine, TotalFill BC RRM paste, TotalFill BC RRM putty, and RetroMTA at 3 mm, and groups 2, 4, 6, 8, and 10 were obturated with the same materials at 4 mm. Ten specimens in each group were evaluated for bacterial leakage of Enterococcus faecalis for 75 days. Five specimens from each group were sectioned to investigate the gap area under scanning electron microscope.

RESULTS

The 3- and 4-mm Biodentine and TotalFill BC RRM putty groups and the 4-mm ProRootMTA group exhibited less bacterial leakage and lower mean percentage of gap area than those of the other groups. TotalFill BC RRM paste showed the highest leakage for both the 3- and 4-mm groups.

CONCLUSION

The 3- and 4-mm Biodentine and TotalFill BC RRM putty groups and the 4-mm ProRootMTA group exhibited the best sealing ability and marginal adaptation of apical plugs.

The use of Bioceramics as root-end filling materials in periradicular surgery: A literature review

Introduction

Periradicular surgery involves the placement of a root-end filling following root-end resection, to provide an apical seal to the root canal system. Historically several materials have been used in order to achieve this seal. Recently a class of materials known as Bioceramics have been adopted. The aim of this article is to provide a review of the outcomes of periradicular surgery when Bioceramic root-end filling materials are used on human permanent teeth in comparison to "traditional" materials.

Methods & results

An electronic literature search was performed in the databases of Web of Science, PubMed and Google Scholar, between 2006 and 2017, to collect clinical studies where Bioceramic materials were utilised as retrograde filling materials, and to compare such materials with traditional materials. In this search, 1 systematic review and 14 clinical studies were identified. Of these, 8 reported the success rates of retrograde Bioceramics, and 6 compared treatment outcomes of mineral trioxide aggregate (MTA) and traditional cements when used as root-end filling materials.

Conclusion

Bioceramic root-end filling materials are shown to have success rates of 86.4-95.6% (over 1-5 years). Bioceramics has significantly higher success rates than amalgam, but they were statistically similar to intermediate restorative material (IRM) and Super ethoxybenzoic acid (Super EBA) when used as retrograde filling materials in apical surgery. However, it seems that the high success rates were not solely attributable to the type of the root-end filling materials. The surgical/microsurgical techniques and tooth prognostic factors may significantly affect treatment outcome.

Strontium ranelate promotes odonto-/osteogenic differentiation/mineralization of dental papillae cells in vitro and mineralized tissue formation of the dental pulp in vivo

This study examined the effects and mechanisms of strontium ranelate (SrRn)-a drug used to treat osteoporosis-on the proliferation and differentiation/mineralization of cloned dental pulp-like cells (mouse dental papillae cells; MDPs). It also determined whether topical application of SrRn to exposed dental pulp tissue promotes the formation of mineralized tissue in vivo. The MDPs were cultured with or without SrRn, and cell proliferation, odonto-/osteoblastic gene expression, mineralized nodule formation, and Akt phosphorylation were evaluated. The formation of mineralized tissue in SrRn-treated pulp tissue in rat upper first molars was evaluated histologically. The SrRn up-regulated cell proliferation and expression of Alp (alkaline phosphatase), Bsp (bone sialoprotein), Dmp (dentin matrix acidic phosphoprotein)-1, Dspp (dentin sialophosphoprotein), and Oc (osteocalcin) in a dose-dependent manner. Mineralized nodule formation was also enhanced by SrRn. NPS-2143, a calcium-sensing receptor (CaSR) antagonist, and siRNA against the CaSR gene blocked SrRn-induced proliferation, odonto-/osteoblastic gene expression, and mineralized nodule formation. SrRn induced Akt phosphorylation, and this was blocked by NPS-2143. Topical application of SrRn to exposed rat molar pulps induced the formation of osteodentin-like mineralized tissue. Our study revealed for the first time that SrRn promotes proliferation and odonto-/osteogenic differentiation/mineralization of MDPs via PI3K/Akt signaling activated by CaSR in vitro; mineralized tissue forms from the dental pulp in vivo.

Chemical Composition and Porosity Characteristics of Various Calcium Silicate-Based Endodontic Cements

Chemical composition and porosity characteristics of calcium silicate-based endodontic cements are important determinants of their clinical performance. Therefore, the aim of this study was to investigate the chemical composition and porosity characteristics of various calcium silicate-based endodontic cements: MTA-angelus, Bioaggregate, Biodentine, Micromega MTA, Ortho MTA, and ProRoot MTA. The specific surface area, pore volume, and pore diameter were measured by the porosimetry analysis of N2 adsorption/desorption isotherms. Chemical composition and powder analysis by scanning electron microscope (SEM) and energy dispersive spectroscopy (EDS) were also carried out on these endodontic cements. Biodentine and MTA-angelus showed the smallest pore volume and pore diameter, respectively. Specific surface area was the largest in MTA-angelus. SEM and EDS analysis showed that Bioaggregate and Biodentine contained homogenous, round and small particles, which did not contain bismuth oxide.

Alkaline Materials and Regenerative Endodontics: A Review

Periapical health is the primary goal of endodontic treatment in mature and immature teeth. In addition, the goals of treatment of immature teeth with arrested root development include root growth to length and maturation of the apex, as well as thickening of the canal wall. These goals are valid for immature teeth that have been subjected to trauma and dental caries or that are the result of developmental anomalies that expose the tooth to the risk of pulp necrosis and consequently result in the cessation of root maturation. Regenerative endodontic procedures (REPs) have been described as a “paradigm shift” in the treatment of immature teeth with pulp necrosis and underdeveloped roots, as there is the potential for further root maturation and return of vitality. Treatment with REPs is advocated as the treatment of choice for immature teeth with pulp necrosis. REP protocols involve the use of alkaline biomaterials, primarily sodium hypochlorite, calcium hydroxide, mineral trioxide aggregates and Biodentine, and are the essential components of a successful treatment regimen.

Storage Medium Affects the Surface Porosity of Dental Cements

INTRODUCTION

Calcium silicate-based cements physical properties is influenced by environmental changes.

AIM

Here, we intended to evaluate the effect of storage medium on surface porosity of root Mineral Trioxide Aggregate (MTA) and Biodentine cement.

MATERIALS AND METHODS

A total of 40 polyethylene tubes were selected and divided into two groups: Group A (MTA) and Group B (Biodentine). Each group was subdivided into two subgroups (n=10). In subgroups A1 and B1, tubes were transferred to Distilled Water (DW), while samples of subgroup A2 and B2 were transferred to Synthetic Tissue Fluid (STF) as storage medium and samples were stored for three days. All specimens were then placed in a desiccator for 24 hours and then subject to surface porosity evaluation by Scanning Electron Microscopy (SEM) at ×500, ×1000, ×2000 and ×5000 magnifications. The number and the surface porosities were determined by Image J analysis. Data were analyzed by ANOVA at level of significance of p<0.05.

RESULTS

The lowest surface porosity was observed in MTA samples stored in STF and the highest was in Biodentine samples stored in DW. Significant differences were noted between groups and subgroups of each group (p< 0.05). MTA samples stored in DW and STF showed significantly lower surface porosities compared to Biodentine samples (p < 0.05).

CONCLUSION

Storage medium can drastically affect the surface porosity of tested calcium silicate-based cements. However, MTA showed lower surface porosity compared to Biodentine cement, which can result in lower microleakage in applied area.

A comparative evaluation of sealing ability of four root end filling materials using fluid filtration method: An in vitro study

Aim of the Study

The aim of this study was to compare and evaluate the sealing ability of four root end filling materials mineral trioxide aggregate (MTA)-Plus, Biodentine, MTA (MTA Angelus) and glass ionomer cement (GIC) using fluid filtration method.

Materials and Methods

Forty-four extracted, human single-rooted teeth were collected. The crown of each tooth was decoronated 2 mm above the cementoenamel junction. Canals were negotiated, instrumented, obturated using lateral compaction method. The access cavities were sealed with Cavit. Root end resection and apical root end cavity preparations of 4 mm were made in each specimen. The selected roots were then randomly divided into four groups (n = 11) and restored as follows. Group 1 - GIC, Group 2 - MTA (MTA Angelus), Group 3 - Biodentine, and Group 4 - MTA Plus. The apical microleakage of each specimen was assessed using fluid filtration method at 72 h, 1 month and 3 months. Microleakage in each specimen was recorded in mm (millimeter) and converted to μl/min/cm H₂O.

Results

MTA Angelus showed least microleakage followed by Biodentine and MTA Plus. Least sealing ability was seen with GIC. There was statistically significant difference between all the materials at various time intervals.

Conclusion

MTA Angelus showed superior sealing ability as a retrograde filling material followed by Biodentine and MTA Plus.

Sealing efficacy of mineral trioxide aggregate with and without nanosilver for root end filling: An in vitro bacterial leakage study

BACKGROUND

Various materials have been added to mineral trioxide aggregate to enhance its properties. This study was aimed to compare the sealing efficacy of MTA with and without nanosilver using bacterial leakage approach.

MATERIAL AND METHODS

Seventy canine teeth were prepared and obturated. Then, after apical resection, the root-end cavities were prepared by ultrasonic retrotips. Teeth were randomly divided into 4 groups containing two experimental groups (n=30) and two negative and positive controls (n=5). In group 1 and 2, root-end cavities were respectively filled with MTA and MTA with nanosilver (by 1% weight). Leakage assessment was carried out by bacterial leakage apparatus with Enterococcus faecalis species. Leakage comparison between experimental groups was done using Mann-Whitney test by Spss 16 software at significancy level of 0.05.

RESULTS

The median bacterial leakages for MTA and MTA with nanosilver were 19 and 2, respectively. The mean bacterial leakages for MTA and MTA with nanosilver were 30.06±28.67 and 9.66±14.25, respectively. Mann-Whitney test indicated that there was a significant difference in bacterial leakage day between two experimental groups (P=0.002).

CONCLUSIONS

Based on the findings of this in-vitro bacterial leakage study, adding nanosilver to MTA decreased its sealing ability. Key words:Root canal therapy, root canal obturation, root canal filling materials, nanosilver, MTA.

Sealing ability of MTA, CPM, and MBPc as root-end filling materials: a bacterial leakage study

Objectives To evaluate the sealing ability of three root-end filling materials (white MTA, CPM, and MBPc) using an Enterococcus faecalis leakage model. Material and Methods Seventy single-root extracted human teeth were instrumented and root-ends were resected to prepare 3 mm depth cavities. Root-end preparations were filled with white MTA, CPM, and MBPc cements. Enterococcus faecalis was coronally introduced and the apical portion was immersed in BHI culture medium with phenol red indicator. The bacterial leakage was monitored every 24 h for 4 weeks. The statistical analysis was performed using the Wilcoxon-Gehan test (p<0.05). Results All cements showed bacterial leakage after 24 hours, except for the negative control group. The MBPc showed significantly less bacterial leakage compared with the MTA group (p<0.05). No significant differences were found between the CPM and the other groups. Conclusions The epoxy resin-based cement MBPc had lower bacterial leakage compared with the calcium silicate-based cements MTA and CPM.

Root-end Filling Materials Alter Fibroblast Differentiation

Root-end filling materials are commonly used following endodontic surgical procedures; however, their effect on adjacent soft tissues is poorly understood. We predict that, due to the differences in their chemical composition, these materials will have profoundly different effects on the survival and differentiation of fibroblasts. Many of the root-end filling materials examined were initially cytotoxic to both PDL and gingival fibroblasts in co-culture experiments; however, this was reduced after the materials were washed in either mineral trioxide aggregate (MTA) or hybrid ionomere composite resin (HICR) for 2 wks. Additionally, PDL fibroblasts displayed enhanced proliferation on MTA and survival on amalgam when compared with gingival fibroblasts. MTA preferentially induced alkaline phosphatase expression and activity in both PDL and gingival fibroblasts. In contrast, HICR inhibited alkaline phosphatase expression and activity. In addition, MTA and HICR repressed pleiotrophin in PDL fibroblasts, while HICR repressed periostin in both fibroblasts. Thus, root-end filling materials differentially affect periodontal fibroblast differentiation. Abbreviations: mineral trioxide aggregate (MTA), zinc-oxide eugenol cement (ZOEC), hybrid ionomer composite resin (HICR), reverse-transcriptase polymerase chain-reaction (RT-PCR).

Apical Microleakage of four Materials after Root End Resection (In Vitro Study)

Hermetic sealing of the apical area after root end resection is essential to the success of endodontic surgery. To compare microleakage after root end resection of the two bioceramic sealers without retrograde filling - Total Fill BC Sealer and MTA Fillapex, and two materials for retrograde filling-MTA and Biodentine, using the method of penetration of dye - 2% methylene blue. Forty eight extracted single-rooted human teeth were used in this study. The resection was made at 3 mm from the root tip at an angle of 90 degree to the long axis of the tooth. The teeth were divided into 4 groups: 1st group (n = 9) - root canal obturation with Total Fill BC Sealer without retrograde filling; 2nd group (n = 8) - root canal obturation with MTA Fillapex without retrograde filling. 3rd group (n = 10) - retrograde ultrasonic cavity preparation and filling with MTA. 4th group (n = 8) - retrograde ultrasonic cavity preparation and filling with Biodentine. The outer surface of the root was covered with two layers of varnish, with the exception of the apical 3 mm and then immersed in 2% methylene blue for 72 h. The degree of penetration of the dye is measured in millimeters. The data was entered and processed with the statistical package IBM SPSS Statistics 22.0. We reject the null hypothesis when p < 0.05. With significantly higher value is the arithmetic mean of the group with the root canal obturation with Total Fill BC Sealer without retrograde filling - 2,01 mm; versus a retrograde filling with MTA - 0,68 mm and Biodentin - 0,51 mm; and no statistically significant difference with the group root canal obturation with MTA Fillapex - 1,76 mm. In the four material microleakage dye was observed, but to varying degrees.

The sealing ability of novel Kryptonite adhesive bone cement as a retrograde filling material

Background. This study evaluated the ability of Kryptonite bone cement in sealing retrograde cavities. Methods. The root canals of one hundred extracted human maxillary incisor teeth were instrumented up to master apical file #40 using Mtwo rotary system and obturated with gutta-percha and AHPlus sealer by cold lateral compaction method. The specimens were assigned to one control group and four experimental groups based on the retrograde filling materials (n=20). The specimens were immersed in 0.5% Rhodamine B solution for 48h. Then the specimens were divided longitudinally into two parts and the depth of dye penetration was assessed under ×10 magnification. Data were analyzed using one-way ANOVA and Bonferroni tests. Results. There were statistically significant difference between the experimental groups and the control group (P<0.05). There were no statistically significant differences between the experimental groups in dye penetration scores (P>0.05). Conclusion . Kryptonite cement provided optimal apical seal in a manner similar to MTA, amalgam and IRM when used as a retrograde filling cement.

Coronal Microleakage of the Resilon and Gutta-Percha Obturation Materials with Epiphany SE Sealer: An in-vitro Study

INTRODUCTION

The coronal leakage of bacteria and other irritants to the root canal system is one of the main factors that may result in clinical failure and affect the long term success of endodontic treatment. The Resilon/Epiphany obturation system has been developed as an alternative to gutta-percha and traditional sealers.

AIM

This study aimed to evaluate and compare the coronal leakage between Resilon obturation material and gutta-percha using the same sealer.

MATERIALS AND METHODS

In this in-vitro study, 72 freshly extracted single-rooted human teeth were used, and were sectioned at CEJ with 13mm length. The roots were randomly divided into four groups. In Group I, 30 roots were obturated using Resilon and Epiphany SE sealer, Group II, 30 roots were obturated using gutta-percha and Epiphany SE. Group III and Group IV, 12 roots were used as control groups (positive and negative). The coronal leakage was measured using the dye penetration technique. Data were statistically analysed by a One-Way ANOVA test.

RESULTS

There was a significant difference between the two experimental groups where Resilon revealed less microleakage than gutta-percha group (p <0.05).

CONCLUSION

Resilon is a suitable replacement for gutta-percha on the basis of its increased resistance to microleakage, but it failed to provide complete hermetic coronal sealing.

Management of incompletely developed teeth requiring root canal treatment

Endodontic management of the permanent immature tooth continues to be a challenge for both clinicians and researchers. Clinical concerns are primarily related to achieving adequate levels of disinfection as 'aggressive' instrumentation is contraindicated and hence there exists a much greater reliance on endodontic irrigants and medicaments. The open apex has also presented obturation difficulties, notably in controlling length. Long-term apexification procedures with calcium hydroxide have proven to be successful in retaining many of these immature infected teeth but due to their thin dentinal walls and perceived problems associated with long-term placement of calcium hydroxide, they have been found to be prone to cervical fracture and subsequent tooth loss. In recent years there has developed an increasing interest in the possibility of 'regenerating' pulp tissue in an infected immature tooth. It is apparent that although the philosophy and hope of 'regeneration' is commendable, recent histologic studies appear to suggest that the calcified material deposited on the canal wall is bone/cementum rather than dentine, hence the absence of pulp tissue with or without an odontoblast layer.

Tooth discoloration induced by a novel mineral trioxide aggregate-based root canal sealer

Objectives:

The aim of this study was to evaluate tooth discoloration caused by contact with a novel injectable mineral trioxide aggregate (MTA)-based root canal sealer (Endoseal; Maruchi, Wonju, Korea) compared with a widely used resin-based root canal sealer (AHplus; Dentsply De Trey, Konstanz, Germany) and conventional MTA (ProRoot; Dentsply, Tulsa, OK, USA).

Materials and Methods:

Forty standardized bovine tooth samples were instrumented and divided into three experimental groups and one control group (n = 10/group). Each material was inserted into the cavity, and all specimens were sealed with a self-adhesive resin. Based on CIE Lab system, brightness change (ΔL) and total color change (ΔE) of each specimen between baseline and 1, 2, 4, and 8 weeks were obtained.

Results:

At all time points, Endoseal showed no significant difference in ΔL and ΔE compared to AHplus and control group (P > 0.05), whereas the ProRoot group showed significantly higher ΔL and ΔE values than the Endoseal group at 2, 4, and 8 weeks (P < 0.05). Therefore, Endoseal showed less discoloration than conventional MTA and a similar color change to AHplus.

Conclusions:

Within the limitations of this study, our data indicate that the MTA-based sealer produces a similar amount of tooth discoloration as AHplus which is considered to be acceptable.

A Comparative Evaluation of Sealing Ability of New MTA Based Sealers with Conventional Resin Based Sealer: An In-vitro Study

INTRODUCTION

Root canal obturation is the most important step in the root canal treatment that aims to obtain a complete hermetic seal and to prevent the re-growth of microorganisms in the root canal system. To accomplish this, many endodontic obturation materials and sealers are being used.

AIM

To evaluate and compare the apical microleakage of a resin based sealer; Adseal with Mineral Trioxide Aggregate (MTA) based sealers; Pro root MTA and MTA Fillapex.

MATERIALS AND METHODS

Total 75 extracted human single rooted teeth were taken and decoronated at cemento-enamel junction. The access cavities and biomechanical preparation were performed using endodontic rotary system. The teeth were randomly divided into five groups with n=15; Group I - Gutta-percha and Adseal sealer; Group II - Gutta-percha and MTA Fillapex; Group III- Gutta-percha and Pro root MTA; Group IV- Gutta-percha without sealer (positive control group); Group V- Root canal remained empty (negative control). All the specimens were stored at 37(0)C with 100% humidity for one week. All root surfaces except the apical 2mm were covered with two layers of nail varnish and then immersed in an aqueous solution of 2% methylene blue dye for 72 hours. Roots were longitudinally split using a diamond disk. Linear apical dye penetration was measured under Stereomicroscope at 40X magnification.

STATISTICAL ANALYSIS

The data obtained was subjected to statistical analysis using paried t-test, ANOVA for interclass comparison, with SPSS statistical software (version 20.0).

RESULTS

The intraobserver reliability was found to be insignificant in each of the triplicate study of all the three study samples. MTA Fillapex group showed maxmium apical microleakage followed by Pro root MTA and Adseal sealer.

CONCLUSION

The results concluded that Adseal sealer showed minimal dye penetration followed by Pro root MTA and MTA Fillapex. Thus, concluding that Adseal sealer is better in apical sealing than Pro root MTA and MTA Fillapex.