Interactions of cotton with CBD peptides

Harnessing cellulose-binding protein domains for the development of functionalized cellulose materials

Cellulosic materials are attracting increasing research interest because of their abundance, biocompatibility, and biodegradability, making them suitable in multiple industrial and medical applications. Functionalization of cellulose is usually required to improve or expand its properties to meet the requirements of different applications. Cellulose-binding domains (CBDs) found in various proteins have been shown to be powerful tools in the functionalization of cellulose materials. In this review, we firstly introduce the structural characteristics of commonly used CBDs belonging to carbohydrate-binding module families 1, 2 and 3. Then, we summarize four main kinds of methodologies for employing CBDs to modify cellulosic materials (i.e., CBD only, genetic fusion, non-covalent linkage and covalent linkage). Via different approaches, CBDs have been used to improve the material properties of cellulose, immobilize enzymes for biocatalysis, and design various detection tools. To achieve industrial applications, researches for lowering the production cost of CBDs, improving their performance (e.g., stability), and expanding their application scenarios are still in need.

Research progress of multi-enzyme complexes based on the design of scaffold protein

Multi-enzyme complexes designed based on scaffold proteins are a current topic in molecular enzyme engineering. They have been gradually applied to increase the production of enzyme cascades, thereby achieving effective biosynthetic pathways. This paper reviews the recent progress in the design strategy and application of multi-enzyme complexes. First, the metabolic channels in the multi-enzyme complex have been introduced, and the construction strategies of the multi-enzyme complex emerging in recent years have been summarized. Then, the discovered enzyme cascades related to scaffold proteins are discussed, emphasizing on the influence of the linker on the fusion enzyme (fusion protein) and its possible mechanism. This review is expected to provide a more theoretical basis for the modification of multi-enzyme complexes and broaden their applications in synthetic biology.

Release of Fragrances from Cotton Functionalized with Carbohydrate-Binding Module Proteins

Perspiration as a response to daily activity and physical exercise results in unpleasant odors that cause social unrest and embarrassment. To tackle it, functional textiles incorporating fragrances could be an effective clothing deodorizing product. This work presents two strategies for the release of β-citronellol from functionalized cotton with carbohydrate-binding module (CBM)-based complexes (OBP::GQ₂₀::CBM/β-citronellol-approach 1 and CBM::GQ₂₀::SP-DS3-liposome/β-citronellol-approach 2). CBM from Cellulomonas fimi was fused with the odorant-binding protein (OBP::GQ₂₀::CBM) and with an anchor peptide with affinity to the liposome membrane (CBM::GQ₂₀::SP-DS3). In approach 1, OBP fusion protein served as a fragrance container, whereas in approach 2, the fragrance was loaded into liposomes with a higher cargo capacity. The two strategies showed a differentiated β-citronellol release profile triggered by an acidic sweat solution. OBP::GQ₂₀::CBM complex revealed a fast release (31.9% and 25.8% of the initial amount, after 1.5 and 24 h of exposure with acidic sweat solution, respectively), while the CBM::GQ₂₀::SP-DS3-liposome complex demonstrated a slower and controlled release (5.9% and 10.5% of the initial amount, after 1.5 and 24 h of exposure with acidic sweat solution, respectively). Both strategies revealed high potential for textile functionalization aimed at controlled release of fragrances. The OBP::GQ₂₀::CBM/β-citronellol complex is ideal for applications requiring fast release of a high amount of fragrance, whereas the CBM::GQ₂₀::SP-DS3-liposome/β-citronellol complex is more suitable for prolonged and controlled release of a lower amount of β-citronellol.

Recombinant CBM-fusion technology - Applications overview

Carbohydrate-binding modules (CBMs) are small components of several enzymes, which present an independent fold and function, and specific carbohydrate-binding activity. Their major function is to bind the enzyme to the substrate enhancing its catalytic activity, especially in the case of insoluble substrates. The immense diversity of CBMs, together with their unique properties, has long raised their attention for many biotechnological applications. Recombinant DNA technology has been used for cloning and characterizing new CBMs. In addition, it has been employed to improve the purity and availability of many CBMs, but mainly, to construct bi-functional CBM-fused proteins for specific applications. This review presents a comprehensive summary of the uses of CBMs recombinantly produced from heterologous organisms, or by the original host, along with the latest advances. Emphasis is given particularly to the applications of recombinant CBM-fusions in: (a) modification of fibers, (b) production, purification and immobilization of recombinant proteins, (c) functionalization of biomaterials and (d) development of microarrays and probes.

The influence of supramolecular structure of cellulose allomorphs on the interactions with cellulose-binding domain, CBD3b from Paenibacillus barcinonensis

The interaction of recombinant cellulose-binding domains (CBDs) of endoglucanase Cel9B from Paenibacillus barcinonensis with different cotton cellulose allomorphs (I, II and III) has been investigated, in order to bring new insights regarding the CBD adsorption and desorption processes. The highest CBD adsorption capacity was recorded for cellulose I, confirming the affinity of proteins to the most crystalline substrate. The weakening and splitting of the hydrogen bonds within cellulose structure after CBD adsorption, as well as a decrease of the crystallinity degree were identified by ATR-FTIR spectroscopy and XRD. The CBD's adsorption kinetic was shown to be rendered by properties as, specific surface area and porosity, being confirmed by dynamic vapor sorption measurements. An important influence of temperature (25, 37 and 50°C) and/or pH medium (4, 5.5, 7 and 10) on the CBD desorption capacity was confirmed, being related to the hydrophobic interactions formed between the CBD and the cellulose allomorphs.

An alkaline thermostable recombinant Humicola grisea var. thermoidea cellobiohydrolase presents bifunctional (endo/exoglucanase) activity on cellulosic substrates

Humicola grisea var. thermoidea is a deuteromycete which secretes a large spectrum of hydrolytic enzymes when grown on lignocellulosic residues. This study focused on the heterologous expression and recombinant enzyme analysis of the major secreted cellulase when the fungus is grown on sugarcane bagasse as the sole carbon source. Cellobiohydrolase 1.2 (CBH 1.2) cDNA was cloned in Pichia pastoris under control of the AOX1 promoter. Recombinant protein (rCBH1.2) was efficiently produced and secreted as a functional enzyme, presenting a molecular mass of 47 kDa. Maximum enzyme production was achieved at 96 h, in culture medium supplemented with 1.34 % urea and 1 % yeast extract and upon induction with 1 % methanol. Recombinant enzyme exhibited optimum activity at 60 °C and pH 8, and presented a remarkable thermostability, particularly at alkaline pH. Activity was evaluated on different cellulosic substrates (carboxymethyl cellulose, filter paper, microcrystalline cellulose and 4-para-nitrophenyl β-D-glucopyranoside). Interestingly, rCBH1.2 presented both exoglucanase and endoglucanase activities and mechanical agitation increased substrate hydrolysis. Results indicate that rCBH1.2 is a potential biocatalyst for applications in the textile industry or detergent formulation.

Characterization of Thermobifida fusca cutinase-carbohydrate-binding module fusion proteins and their potential application in bioscouring

Cutinase from Thermobifida fusca is thermally stable and has potential application in the bioscouring of cotton in the textile industry. In the present study, the carbohydrate-binding modules (CBMs) from T. fusca cellulase Cel6A (CBM(Cel6A)) and Cellulomonas fimi cellulase CenA (CBM(CenA)) were fused, separately, to the carboxyl terminus of T. fusca cutinase. Both fusion enzymes, cutinase-CBM(Cel6A) and cutinase-CBM(CenA), were expressed in Escherichia coli and purified to homogeneity. Enzyme characterization showed that both displayed similar catalytic properties and pH stabilities in response to T. fusca cutinase. In addition, both fusion proteins displayed an activity half-life of 53 h at their optimal temperature of 50°C. Compared to T. fusca cutinase, in the absence of pectinase, the binding activity on cotton fiber was enhanced by 2% for cutinase-CBM(Cel6A) and by 28% for cutinase-CBM(CenA), whereas in the presence of pectinase, the binding activity was enhanced by 40% for the former and 45% for the latter. Notably, a dramatic increase of up to 3-fold was observed in the amount of released fatty acids from cotton fiber by both cutinase-CBM fusion proteins when acting in concert with pectinase. This is the first report of improving the scouring efficiency of cutinase by fusing it with CBM. The improvement in activity and the strong synergistic effect between the fusion proteins and pectinase suggest that they may have better applications in textile bioscouring than the native cutinase.

Comparative characterization of a recombinant Volvariella volvacea endoglucanase I (EG1) with its truncated catalytic core (EG1-CM), and their impact on the bio-treatment of cellulose-based fabrics

Recombinant Volvariella volvacea endoglucanase 1 (EG1) and its catalytic module (EG1-CM) were obtained by expression in Pichia pastoris, purified by two-step chromatography, and the catalytic activities and binding capacities were compared. EG1 and EG1-CM exhibited very similar specific activities towards the soluble substrates carboxymethyl cellulose, lichenan and mannan, and insoluble H(3)PO(4) acid-swollen cellulose, whereas the specific activities of EG1-CM towards the insoluble substrates alpha-cellulose, Avicel and filter paper were approximately 58, 43 and 38%, respectively compared to EG1. No increase in reducing sugar release was detected in the reaction mixture supernatants after 50h exposure of filter paper, Avicel or alpha-cellulose to EG1-CM, whereas increases in the total reducing sugar equivalents (i.e. reducing sugar released into solution together with new reducing ends generated in the cellulosic substrates) in reaction mixtures were observed after 1h. In reaction mixtures containing EG1, soluble reducing sugar equivalents were detected in supernatants after 3h incubation with the insoluble cellulosic substrates. EG1-CM did not adsorb to Avicel, and the binding capacities of EG1-CM towards filter paper and H(3)PO(4) acid-swollen cellulose were 27.9-33.3% and 29.6-60.6%, respectively of values obtained with EG1 within the range of total added protein. In enzymatic deinking experiments, the ink removal rate in EG1-CM-treated samples was only slightly higher (approximately 8%), than that of untreated controls, whereas that of the EG1-treated samples was 100% higher. Bio-stoning of denim with EG1-CM resulted in increases of 48% and 40% in weight loss and indigo dye removal, respectively compared with untreated controls. These increases were considerably lower than the corresponding values of 219% and 133% obtained when samples were treated with EG1.

Molecular cloning and biochemical characterization of a family-9 endoglucanase with an unusual structure from the gliding bacteria Cytophaga hut chinsonii

Cytophaga hutchinsonii was originally isolated from sugarcane piles. This microorganism therefore probably produces an array of enzymes allowing it to digest cellulosic substrates. C. hutchinsonii thus represents a rich source of potentially effective cellulase enzymes that can be harnessed for conversion of biomass to simple sugars. These sugars can then be used as feedstock for ethanol production or other chemical syntheses. In this study, we report the PCR cloning of an endoglucanase gene (Cel9A) from C. hutchinsonii using degenerated primers directed at the catalytic domain. Alignment of the amino acids sequence revealed that Cel9A has a gene structure totally different from the other known cellulose degraders. The most striking feature of this cloned protein is the absence of a cellulose-binding domain (CBD), which to date was believed to be imperative in cellulose hydrolysis. Consequently, the Cel9A gene, encoding beta-1,4 endoglucanase from C. hutchinsonii was overexpressed in Escherichia coli with a His-Tag based expression vector. The resulting polypeptide, with a molecular mass of 105 KDa, was purified from cell extracts by affinity chromatography on cellulose. Mature Cel9A was optimally active at pH 5.0 and 45 degrees C. The enzyme efficiently hydrolyzes carboxymethyl- cellulose (CMC). Analysis of CMC and filter paper hydrolysis suggests that Cel9A is a nonprocessive enzyme with endo-cellulase activities.

Carbohydrate binding modules: biochemical properties and novel applications

Polysaccharide-degrading microorganisms express a repertoire of hydrolytic enzymes that act in synergy on plant cell wall and other natural polysaccharides to elicit the degradation of often-recalcitrant substrates. These enzymes, particularly those that hydrolyze cellulose and hemicellulose, have a complex molecular architecture comprising discrete modules which are normally joined by relatively unstructured linker sequences. This structure is typically comprised of a catalytic module and one or more carbohydrate binding modules (CBMs) that bind to the polysaccharide. CBMs, by bringing the biocatalyst into intimate and prolonged association with its substrate, allow and promote catalysis. Based on their properties, CBMs are grouped into 43 families that display substantial variation in substrate specificity, along with other properties that make them a gold mine for biotechnologists who seek natural molecular "Velcro" for diverse and unusual applications. In this article, we review recent progress in the field of CBMs and provide an up-to-date summary of the latest developments in CBM applications.

New substrates for reliable enzymes: enzymatic modification of polymers

Recent studies clearly indicate that the modification of synthetic and natural polymers with enzymes is an environmentally friendly alternative to chemical methods using harsh conditions. New processes using lipases, proteases, nitrilases and glycosidases have been developed for the specific non-destructive functionalization of polymer surfaces. The specificity of enzymes has also been exploited in polymer synthesis; for example, lipases have been used for the production of optically active polyesters. Oxidoreductases have been used for the cross-linking and grafting of lignaceous materials and for the production of polymers from phenolics. Recent successes in this area are mainly attributable to advances in the design of reaction systems (e.g. biphasic systems and micellar solutions), while the enzymes are mainly from commercial sources.

Atomic force microscopy study of cellulose surface interaction controlled by cellulose binding domains

Colloidal probe microscopy has been used to study the interaction between model cellulose surfaces and the role of cellulose binding domain (CBD), peptides specifically binding to cellulose, in interfacial interaction of cellulose surfaces modified with CBDs. The interaction between pure cellulose surfaces in aqueous electrolyte solution is dominated by double layer repulsive forces with the range and magnitude of the net force dependent on electrolyte concentration. AFM imaging reveals agglomeration of CBD adsorbed on cellulose surface. Despite an increase in surface charge owing to CBD binding to cellulose surface, force profiles are less repulsive for interactions involving, at least, one modified surface. Such changes are attributed to irregularity of the topography of protein surface and non-uniform distribution of surface charges on the surface of modified cellulose. Binding double CBD hybrid protein to cellulose surfaces causes adhesive forces at retraction, whereas separation curves obtained with cellulose modified with single CBD show small adhesion only at high ionic strength. This is possibly caused by the formation of the cross-links between cellulose surfaces in the case of double CBD.

Cellulose-binding domains

Many researchers have acknowledged the fact that there exists an immense potential for the application of the cellulose-binding domains (CBDs) in the field of biotechnology. This becomes apparent when the phrase "cellulose-binding domain" is used as the key word for a computerized patent search; more then 150 hits are retrieved. Cellulose is an ideal matrix for large-scale affinity purification procedures. This chemically inert matrix has excellent physical properties as well as low affinity for nonspecific protein binding. It is available in a diverse range of forms and sizes, is pharmaceutically safe, and relatively inexpensive. Present studies into the application of CBDs in industry have established that they can be applied in the modification of physical and chemical properties of composite materials and the development of modified materials with improved properties. In agro-biotechnology, CBDs can be used to modify polysaccharide materials both in vivo and in vitro. The CBDs exert nonhydrolytic fiber disruption on cellulose-containing materials. The potential applications of "CBD technology" range from modulating the architecture of individual cells to the modification of an entire organism. Expressing these genes under specific promoters and using appropriate trafficking signals, can be used to alter the nutritional value and texture of agricultural crops and their final products.

Modification of polysaccharides and plant cell wall by endo-1,4-beta-glucanase and cellulose-binding domains

Cellulose is one of the most abundant polymers in nature. Different living systems evolved simultaneously, using structurally similar proteins to synthesize and metabolize polysaccharides. In the growing plant, cell wall loosening, together with cellulose biosynthesis, enables turgor-driven cell expansion. It has been postulated that endo-1,4-beta-glucanases (EGases) play a central role in these complex activities. Similarly, microorganisms use a consortium of lytic enzymes to convert cellulose into soluble sugars. Most, if not all, cellulases have a modular structure with two or more separate independent functional domains. Binding to cellulose is mediated by a cellulose-binding domain (CBD), whereas the catalytic domain mediates hydrolysis. Today, EGases and CBDs are known to exist in a wide range of species and it is evident that both possess immense potential in modifying polysaccharide materials in-vivo and in-vitro. The hydrolytic function is utilized for polysaccharide degradation in microbial systems and cell wall biogenesis in plants. The CBDs exerts activity that can be utilized for effective degradation of crystalline cellulose, plant cell wall relaxation, expansion and cell wall biosynthesis. Applications range from modulating the architecture of individual cells to an entire organism. These genes, when expressed under specific promoters and appropriate trafficking signals can be used to alter the nutritional value and texture of agricultural crop and their final products. EGases and CBDs may also find applications in the modification of physical and chemical properties of composite materials to create new materials possessing improved properties.

Effects of agitation level on the adsorption, desorption, and activities on cotton fabrics of full length and core domains of EGV (Humicola insolens) and CenA (Cellulomonas fimi)

The activities (at pH 7 and 50 degrees C) of purified EGV (Humicola insolens) and CenA (Cellulomonas fimi) were determined on cotton fabrics at high and low levels of mechanical agitation. Similar activity measurements were also made by using the core domains of these cellulases. Activity experiments suggested that the presence of cellulose binding domains (CBDs) is not essential for cellulase performance in the textile processes, where high levels of mechanical agitation are applied. The binding reversibilities of these cellulases and their cores were studied by dilution of the treatment liquor after equilibrium adsorption. EGV showed low percentage of adsorption under both levels of agitation. It was observed that the adsorption/desorption processes of cellulases are enhanced by higher mechanical agitation levels and that the binding of cellulase with CBD of family I (EGV) is more reversible than that of CBD of the cellulase of family II (CenA).