Staphylococcus epidermidis-fibronectin binding and its inhibition by heparin

Management of Biofilm with Breast Implant Surgery

LEARNING OBJECTIVES

After studying this article, the participant should be able to: 1. Understand how bacteria negatively impact aesthetic and reconstructive breast implants. 2. Understand how bacteria infect breast implants. 3. Understand the evidence associated with common implant infection-prevention strategies, and their limitations. 4. Understand why implementation of bacteria-mitigation strategies such as antibiotic administration or "no-touch" techniques may not indefinitely prevent breast implant infection.

SUMMARY

Bacterial infection of aesthetic and reconstructive breast implants is a common and expensive problem. Subacute infections or chronic capsular contractures leading to device explantation are the most commonly documented sequelae. Although bench and translational research underscores the complexities of implant-associated infection, high-quality studies with adequate power, control groups, and duration of follow-up are lacking. Common strategies to minimize infections use antibiotics-administered systemically, in the breast implant pocket, or by directly bathing the implant before insertion-to limit bacterial contamination. Limiting contact between the implant and skin or breast parenchyma represents an additional common strategy. The clinical prevention of breast implant infection is challenged by the clean-contaminated nature of breast parenchyma, and the variable behavior of not only specific bacterial species but also their strains. These factors impact bacterial virulence and antibiotic resistance.

CD9 co-operation with syndecan-1 is required for a major staphylococcal adhesion pathway

Epithelial colonization is a critical first step in bacterial pathogenesis. Staphylococcus aureus can utilize several host factors to associate with cells, including α5β1 integrin and heparan sulfate proteoglycans, such as the syndecans. Here, we demonstrate that a partner protein of both integrins and syndecans, the host membrane adapter protein tetraspanin CD9, is essential for syndecan-mediated staphylococcal adhesion. Fibronectin is also essential in this process, while integrins are only critical for post-adhesion entry into human epithelial cells. Treatment of epithelial cells with CD9-derived peptide or heparin caused significant reductions in staphylococcal adherence, dependent on both CD9 and syndecan-1. Exogenous fibronectin caused a CD9-dependent increase in staphylococcal adhesion, whereas blockade of β1 integrins did not affect adhesion but did reduce the subsequent internalization of adhered bacteria. CD9 disruption or deletion increased β1 integrin-mediated internalization, suggesting that CD9 coordinates sequential staphylococcal adhesion and internalization. CD9 controls staphylococcal adhesion through syndecan-1, using a mechanism that likely requires CD9-mediated syndecan organization to correctly display fibronectin at the host cell surface. We propose that CD9-derived peptides or heparin analogs could be developed as anti-adhesion treatments to inhibit the initial stages of staphylococcal pathogenesis. IMPORTANCE Staphylococcus aureus infection is a significant cause of disease and morbidity. Staphylococci utilize multiple adhesion pathways to associate with epithelial cells, including interactions with proteoglycans or β1 integrins through a fibronectin bridge. Interference with another host protein, tetraspanin CD9, halves staphylococcal adherence to epithelial cells, although CD9 does not interact directly with bacteria. Here, we define the role of CD9 in staphylococcal adherence and uptake, observing that CD9 coordinates syndecan-1, fibronectin, and β1 integrins to allow efficient staphylococcal infection. Two treatments that disrupt this action are effective and may provide an alternative to antibiotics. We provide insights into the mechanisms that underlie staphylococcal infection of host cells, linking two known adhesion pathways together through CD9 for the first time.

Strategies to Mitigate and Treat Orthopaedic Device-Associated Infections

Orthopaedic device implants play a crucial role in restoring functionality to patients suffering from debilitating musculoskeletal diseases or to those who have experienced traumatic injury. However, the surgical implantation of these devices carries a risk of infection, which represents a significant burden for patients and healthcare providers. This review delineates the pathogenesis of orthopaedic implant infections and the challenges that arise due to biofilm formation and the implications for treatment. It focuses on research advancements in the development of next-generation orthopaedic medical devices to mitigate against implant-related infections. Key considerations impacting the development of devices, which must often perform multiple biological and mechanical roles, are delineated. We review technologies designed to exert spatial and temporal control over antimicrobial presentation and the use of antimicrobial surfaces with intrinsic antibacterial activity. A range of measures to control bio-interfacial interactions including approaches that modify implant surface chemistry or topography to reduce the capacity of bacteria to colonise the surface, form biofilms and cause infections at the device interface and surrounding tissues are also reviewed.

The giant staphylococcal protein Embp facilitates colonization of surfaces through Velcro-like attachment to fibrillated fibronectin

Staphylococcus epidermidis causes some of the most hard-to-treat clinical infections by forming biofilms: Multicellular communities of bacteria encased in a protective matrix, supporting immune evasion and tolerance against antibiotics. Biofilms occur most commonly on medical implants, and a key event in implant colonization is the robust adherence to the surface, facilitated by interactions between bacterial surface proteins and host matrix components. S. epidermidis is equipped with a giant adhesive protein, extracellular matrix-binding protein (Embp), which facilitates bacterial interactions with surface-deposited, but not soluble fibronectin. The structural basis behind this selective binding process has remained obscure. Using a suite of single-cell and single-molecule analysis techniques, we show that S. epidermidis is capable of such distinction because Embp binds specifically to fibrillated fibronectin on surfaces, while ignoring globular fibronectin in solution. S. epidermidis adherence is critically dependent on multivalent interactions involving 50 fibronectin-binding repeats of Embp. This unusual, Velcro-like interaction proved critical for colonization of surfaces under high flow, making this newly identified attachment mechanism particularly relevant for colonization of intravascular devices, such as prosthetic heart valves or vascular grafts. Other biofilm-forming pathogens, such as Staphylococcus aureus, express homologs of Embp and likely deploy the same mechanism for surface colonization. Our results may open for a novel direction in efforts to combat devastating, biofilm-associated infections, as the development of implant materials that steer the conformation of adsorbed proteins is a much more manageable task than avoiding protein adsorption altogether.

A usually harmless bacterium called Staphylococcus epidermidis lives on human skin. Sometimes it makes its way into the bloodstream through a cut or surgical procedure, but it rarely causes blood infections. It can, however, cause severe infections when it attaches to the surface of a medical implant like a pacemaker or an artificial replacement joint. It does this by forming a colony of bacteria on the implant’s surface called a biofilm, which protects the bacteria from destruction by the immune system or antibiotics.

Understanding how Staphylococcus epidermidis implant infections start is critical to preventing them. This information may help scientists develop infection-resistant implants or new treatments for implant infections. Scientists suspect that Staphylococcus epidermidis attaches to implants by binding to a human protein called fibronectin, which coats medical implants in the human body. Another protein on the surface of the bacteria, called Embp, facilitates the connection. But why the bacteria attach to fibronectin on implants, and not fibronectin molecules in the bloodstream, is unclear.

Now, Khan, Aslan et al. show that Embp forms a Velcro-like bond with fibronectin on the surface of implants. In the experiments, Khan and Aslan et al. used powerful microscopes to create 3-dimensional images of the interactions between Embp and fibronectin. The experiments showed that Embp's attachment site is hidden on the globe-shaped form of fibronectin circulating in the blood. But when fibronectin covers an implant surface, it forms a fibrous network, and Embp can attach to it with up to 50 Velcro-like individual connections. These many weak connections form a strong bond that withstands the force of blood pumping past.

The experiments show that the fibrous coating of fibronectin on implants makes them a hotspot for Staphylococcus epidermidis infections. Finding ways to block Embp from attaching to fibronectin on implants, or altering the form fibronectin takes on implants, may help prevent these infections. Many bacteria that form biofilms have an Embp-like protein. As a result, these discoveries may also help scientists develop prevention or treatment strategies for other bacterial biofilm infections.

Development of Silver-Containing Hydroxyapatite-Coated Antimicrobial Implants for Orthopaedic and Spinal Surgery

The prevention of surgical site infections is directly related to the minimization of surgical invasiveness, and is in line with the concept of minimally invasive spine therapy (MIST). In recent years, the incidence of postoperative infections has been increasing due to the increased use of spinal implant surgery in patients at high risk of infection, including the elderly and easily infected hosts, the limitations of poor bone marrow transfer of antibiotics, and the potential for contamination of surgical gloves and instruments. Thus, the development of antimicrobial implants in orthopedic and spinal surgery is becoming more and more popular, and implants with proven antimicrobial, safety, and osteoconductive properties (i.e., silver, iodine, antibiotics) in vitro, in vivo, and in clinical trials have become available for clinical use. We have developed silver-containing hydroxyapatite (Ag-HA)-coated implants to prevent post-operative infection, and increase bone fusion capacity, and have successfully commercialized antibacterial implants for hip prostheses and spinal interbody cages. This narrative review overviews the present status of available surface coating technologies and materials; describes how the antimicrobial, safety, and biocompatibility (osteoconductivity) of Ag-HA-coated implants have been demonstrated for commercialization; and reviews the clinical use of antimicrobial implants in orthopedic and spinal surgery, including Ag-HA-coated implants that we have developed.

Development of effective heparin extraction method from pig by-products and analysis of their bioavailability

This study was conducted to develop an effective heparin extraction method by using low-cost and highly effective enzymes from six pig by-products (liver, lung, heart, stomach, small intestine, and large intestine), and analyze their bioavailability. Low-cost and highly effective enzymes (alkaline-AK and papain) and a common enzyme (trypsin) were used for the heparin extraction. The angiotensin I - converting enzyme (ACE) inhibitory activity and the antimicrobial activity of extracted heparin were analyzed to verify their bioavailability. The average amount of heparin extracted per kilogram of pig by-products was 439 mg from the liver, 127 mg from the lung, 398 mg from the heart, 261 mg from the stomach, 197 mg from the small intestine, and 239 mg from the large intestine. Various enzymes were used to extract heparin, and the amount of extracted heparin was similar. Based on 1 g of pig by-product, the enzymes trypsin, papain, and alkaline-AK could extract 1,718 mg, 1,697 mg, and 1,905 mg of heparin, respectively. Heparin extracted from pig by-products showed antihypertensive activity and antimicrobial activity against Staphylococcus aureus at low populations. These results indicated that heparin can be obtained from pig by-products at a low cost.

A Giant Extracellular Matrix Binding Protein of Staphylococcus epidermidis Binds Surface-Immobilized Fibronectin via a Novel Mechanism

Although it is normally an innocuous part of the human skin microbiota, Staphylococcus epidermidis has emerged as a major nosocomial pathogen, and implanted foreign materials are an essential risk factor for the development of an infection. The extraordinary efficiency of S. epidermidis to colonize artificial surfaces is particularly related to the ability to form biofilms. Biofilm formation itself critically depends on stable pathogen binding to extracellular host matrix components, e.g. fibronectin (Fn), covering inserted devices in vast amounts. Extracellular matrix binding protein (Embp) and its subdomains referred to as the F-repeat and the FG-repeat are critical for adherence of S. epidermidis to surface-immobilized Fn. Embp-Fn interactions preferentially occur with surface-bound, but not folded, globular Fn via binding to the F3 domain. High-resolution structure analysis of F- and FG-repeats revealed that both repeats are composed of two tightly connected triple α-helix bundles, exhibiting an elongated but rather rigid structural organization in solution. Both F- and FG-repeat possess Fn-binding capacity via interactions with type III subdomain FN12, involving residues within the C and F β-sheet. FN12 essentially supports stability of the globular Fn state, and thus these findings reasonably explain why Embp-mediated interaction of S. epidermidis necessitates Fn surface immobilization. Thus, Embp employs an uncharacterized bacterial Fn-binding mechanism to promote staphylococcal adherence.IMPORTANCE Staphylococcus epidermidis is a leading pathogen in implant-associated hospital infections. The pathogenesis critically depends on bacterial binding to ECM components, specifically fibronectin (Fn). The cell surface-localized, 1-MDa extracellular matrix binding protein (Embp) is essentially characterized by 10 F- and 40 FG-repeats. These repetitive units, each characterized by two α-helical bundles, organize themselves in a rigid, elongated form. Embp binds preferentially to surface-localized but not soluble Fn, with both F- and FG-repeats being sufficient for Fn binding and resulting bacterial adherence. Binding preferentially involves Fn type III domain, specifically residues of FN12 β-sheets C and F. Both play key role in stabilizing the globular Fn conformation, explaining the necessity of Fn surface immobilization for a subsequent interaction with Embp. In comparison to many other bacterial Fn-binding proteins using the Fn N terminus, Embp employs a previously undescribed mechanism supporting the adhesion of S. epidermidis to surface-immobilized Fn.

Establishment and Characterization of Bacterial Infection of Breast Implants in a Murine Model

BACKGROUND

Staphylococcus epidermidis and Pseudomonas aeruginosa are the most common causes of Gram-positive and Gram-negative breast implant-associated infection. Little is known about how these bacteria infect breast implants as a function of implant surface characteristics and timing of infection.

OBJECTIVES

The aim of this work was to establish a mouse model for studying the impact of various conditions on breast implant infection.

METHODS

Ninety-one mice were implanted with 273 breast implant shells and infected with S. epidermidis or P. aeruginosa. Smooth, microtextured, and macrotextured breast implant shells were implanted in each mouse. Bacterial inoculation occurred during implantation or 1 day later. Implants were retrieved 1 or 7 days later. Explanted breast implant shells were sonicated, cultured, and colony-forming units determined or analyzed with scanning electron microscopy.

RESULTS

P. aeruginosa could be detected on all device surfaces at 1- and 7- days post infection (dpi), when mice were implanted and infected concurrently or when they were infected 1- day after implantation. However, P. aeruginosa infection was more robust on implant shells retrieved at 7 dpi and particularly on the macrotextured devices that were infected 1 day post implantation. S. epidermidis was mostly cleared from implants when mice were infected and implanted concurrently. Other the other hand, S. epidermidis could be detected on all device surfaces at 1 dpi and 2 days post implantation. However, S. epidermdis infection was suppressed by 7 dpi and 8 days post implantation.

CONCLUSIONS

S. epidermidis required higher inoculating doses to cause infection and was cleared within 7 days. P. aeruginosa infected at lower inoculating doses, with robust biofilms noted 7 days later.

Fibronectin and Its Role in Human Infective Diseases

Fibronectin is a multidomain glycoprotein ubiquitously detected in extracellular fluids and matrices of a variety of animal and human tissues where it functions as a key link between matrices and cells. Fibronectin has also emerged as the target for a large number of microorganisms, particularly bacteria. There are clear indications that the binding of microorganism’ receptors to fibronectin promotes attachment to and infection of host cells. Each bacterium may use different receptors which recognize specific fibronectin domains, mostly the N-terminal domain and the central cell-binding domain. In many cases, fibronectin receptors have actions over and above that of simple adhesion: In fact, adhesion is often the prerequisite for invasion and internalization of microorganisms in the cells of colonized tissues. This review updates the current understanding of fibronectin receptors of several microorganisms with emphasis on their biochemical and structural properties and the role they can play in the onset and progression of host infection diseases. Furthermore, we describe the antigenic profile and discuss the possibility of designing adhesion inhibitors based on the structure of the fibronectin-binding site in the receptor or the receptor-binding site in fibronectin.

Review of functional materials for potential use as wearable infection sensors in limb prostheses

The fundamental goal of prosthesis is to achieve optimal levels of performance and enhance the quality of life of amputees. Socket type prostheses have been widely employed despite their known drawbacks. More recently, the advent of osseointegrated prostheses have demonstrated potential to be a better alternative to socket prosthesis eliminating most of the drawbacks of the latter. However, both socket and osseointegrated limb prostheses are prone to superficial infections during use. Infection prone skin lesions from frictional rubbing of the socket against the soft tissue are a known problem of socket type prosthesis. Osseointegration, on the other hand, results in an open wound at the implant-stump interface. The integration of infection sensors in prostheses to detect and prevent infections is proposed to enhance quality of life of amputees. Pathogenic volatiles having been identified to be a potent stimulus, this paper reviews the current techniques in the field of infection sensing, specifically focusing on identifying portable and flexible sensors with potential to be integrated into prosthesis designs. Various sensor architectures including but not limited to sensors fabricated from conducting polymers, carbon polymer composites, metal oxide semiconductors, metal organic frameworks, hydrogels and synthetic oligomers are reviewed. The challenges and their potential integration pathways that can enhance the possibilities of integrating these sensors into prosthesis designs are analysed.

Antibacterial Properties of a Novel Zirconium Phosphate-Glycinediphosphonate Loaded with Either Zinc or Silver

A novel compound consisting of a zirconium phosphate-glycinediphosphonate (ZPGly) has recently been introduced. This 2D-structured material forming nanosheets was exfoliated under appropriate conditions, producing colloidal aqueous dispersions (ZPGly-e) which were then loaded with zinc (Zn/ZPGly) or silver ions. Silver ions were subsequently reduced to produce metallic silver nanoparticles on exfoliated ZPGly nanosheets (Ag@ZPGly). In the search for new anti-infective materials, the present study investigated the properties of colloidal dispersions of ZPGly-e, Zn/ZPGly, and Ag@ZPGly. Ag@ZPGly was found to be a bactericidal material and was assayed to define its minimal inhibitory concentration (MIC) and minimal bactericidal concentration (MBC) on the five most prevalent pathogens of orthopaedic implant infections, namely: Staphylococcus aureus ATCC25923, Staphylococcus epidermidis RP62A, Enterococcus faecalis ATCC29212, Escherichia coli ATCC51739, and Pseudomonas aeruginosa ATCC27853. MIC and MBC were in the range of 125–250 μg/mL and 125–1000 μg/mL, respectively, with E. coli being the most sensitive species. Even colloidal suspensions of exfoliated ZPGly nanosheets and Zn/ZPGly exhibited some intrinsic antibacterial properties, but only at greater concentrations. Unexpectedly, Zn/ZPGly was less active than ZPGly-e.

Implant infections: adhesion, biofilm formation and immune evasion

Medical device-associated infections account for a large proportion of hospital-acquired infections. A variety of opportunistic pathogens can cause implant infections, depending on the type of the implant and on the anatomical site of implantation. The success of these versatile pathogens depends on rapid adhesion to virtually all biomaterial surfaces and survival in the hostile host environment. Biofilm formation on implant surfaces shelters the bacteria and encourages persistence of infection. Furthermore, implant-infecting bacteria can elude innate and adaptive host defences as well as biocides and antibiotic chemotherapies. In this Review, we explore the fundamental pathogenic mechanisms underlying implant infections, highlighting orthopaedic implants and Staphylococcus aureus as a prime example, and discuss innovative targets for preventive and therapeutic strategies.

Adaptive antibacterial biomaterial surfaces and their applications

Bacterial infections on the implant surface may eventually lead to biofilm formation ​and thus threaten the use of implants in body. Despite efficient host immune system, the implant surface can be rapidly occupied by bacteria, resulting in infection persistence, implant failure, and even death of the patients. It is difficult to cope with these problems because bacteria exhibit complex adhesion mechanisms to the implants that vary according to bacterial strains. Different biomaterial coatings have been produced to release antibiotics to kill bacteria. However, antibiotic resistance occurs very frequently. Stimuli-responsive biomaterials have gained much attention in recent years ​but are not effective enough in killing the pathogens because of the complex mechanisms in bacteria. This review is focused on the development of highly efficient and specifically targeted biomaterials that release the antimicrobial agents or respond to bacteria on demands in body. The mechanisms of bacterial adhesion, biofilm formation, and antibiotic resistance are discussed, and the released substances accounting for implant infection are described. Strategies that have been used in past for the eradication of bacterial infections are also discussed. Different types of stimuli can be triggered only upon the existence of bacteria, leading to the release of antibacterial molecules that in turn kill the bacteria. In particular, the toxin-triggered, pH-responsive, and dual stimulus-responsive adaptive antibacterial biomaterials are introduced. Finally, the state of the art in fabrication of dual responsive antibacterial biomaterials and tissue integration in medical implants is discussed.

Penile prosthesis biofilm formation and emerging therapies against them

Infections are among the most feared and devastating complications of penile prosthesis infections, often requiring surgical exploration and explantation are prosthesis infections. While the rate of infections have decreased due to antibiotic prophylaxis, antiseptic device preparation, increased sterility in implantation techniques and device modifications, infections still occur at a rate of 1-3%. This article reviews the formation of biofilms on penile prostheses and novel, experimental methods to prevent and eradicate them.

Antibacterial surface modification of titanium implants in orthopaedics

The use of biomaterials in orthopaedics for joint replacement, fracture healing and bone regeneration is a rapidly expanding field. Infection of these biomaterials is a major healthcare burden, leading to significant morbidity and mortality. Furthermore, the cost to healthcare systems is increasing dramatically. With advances in implant design and production, research has predominately focussed on osseointegration; however, modification of implant material, surface topography and chemistry can also provide antibacterial activity. With the increasing burden of infection, it is vitally important that we consider the bacterial interaction with the biomaterial and the host when designing and manufacturing future implants. During this review, we will elucidate the interaction between patient, biomaterial surface and bacteria. We aim to review current and developing surface modifications with a view towards antibacterial orthopaedic implants for clinical applications.

Host Defense Against Implant Infection: The Ambivalent Role of Phagocytosis

Bacteria embedded in biofilms resist both antibiotics and host defense mechanisms. However, biofilms are not inherently protected against the attack of phagocytic cells. The weapons that polymorphonuclear neutrophils employ against implant infection are phagocytosis, degranulation, with release of antimicrobial molecules, and formation of Neutrophil Extracellular Traps (NETs). NETs contain DNA, histones, and neutrophil elastase, which enable neutrophils to fulfill their role of limiting both microbial spread and the collateral damage from granular contents. It is not yet clear whether the DNA released by neutrophils would support biofilm formation by adding to bacterial extracellular DNA (eDNA), an integral part of the biofilm extracellular matrix. In spite of the evidence of somewhat effective phagocytosis around an implant infection, biofilm-embedded staphylococci persist, tissue destruction occurs and, in the case of orthopedic implant infection, osteolysis prevails. The mechanism for tissue destruction is based on the infiltration and persistence at the site of infection of neutrophils which are unable to effectively perform phagocytosis, but able to inflict tissue damage and cause osteolysis by the release of proteolytic and collagenolytic enzymes. Phagocytosis thus has an ambiguous and ambivalent role: it carries out an antibacterial strategy and at the same time is responsible for osteolysis.

Advances in in Vitro and in Vivo Models for Studying the Staphylococcal Factors Involved in Implant Infections

Implant infections due to staphylococci are one of the greatest threats facing patients receiving implant devices. For many years researchers have sought to understand the mechanisms involved in the adherence of the bacterium to the implanted device and the formation of the unique structure, the biofilm, which protects the indwelling bacteria from the host defence and renders them resistant to antibiotic treatment. A major goal has been to develop in vitro and in vivo models that adequately reflect the real-life situation. From the simple microtiter plate assay and scanning electron microscopy, tools for studying adherence and biofilm formation have since evolved to include specialised equipment for studying adherence, flow cell systems, real-time analysis of biofilm formation using reporter gene assays both in vitro and in vivo, and a wide variety of animal models. In this article, we discuss advances in the last few years in selected in vitro and in vivo models as well as future developments in the study of adherence and biofilm formation by the staphylococci.

New Surfaces with Hydrophilic/Hydrophobic Characteristics in Relation to (No)Bioadhesion

The possibility of biosurfaces with high or low adhesiveness for protein, bacteria or eukaryotic cells is discussed.

At the interface surface object/biological milieu, biocompatibility, (no) bioadhesion and (no) biocontamination are shown to be correlated with physico-chemical surface characteristics. First consequence is the (no) possibility of biofilm formation.

Substrates with low surface energy could interact only with hydrophobic biomolecules. On substrates with high surface energy, a water monolayer spontaneously formed. Modification of a surface by plasma techniques is a way for engineering biomaterials. Plasma techniques are dry processes and more suitable for biomedical applications. In the field of biomaterial medical devices, in hygienic prevention of nosocomial diseases, in food packaging, the use of substrates with a very hydrophilic character may help to prevent the proliferation of cells and bacteria. Such a technique is so efficient that antibiotic molecules are not necessary. Therefore, surface engineering is a tool for modifying and adapting materials to specific biological applications.

Implant Infection and Infection Resistant Materials: A Mini Review

Implant infection is an aggressive, often irreducible post-surgical infection. It remains the primary cause of implant failure. Bacterial contamination during surgery and subsequent adhesion onto biomaterial surface of opportunistic microorganisms, such as staphylococcal species, exopolysaccharidic slimes or specific adhesins, initiates the implant infection.

Pathogenesis of periprosthestic infection is the focus of studies aimed at developing infection resistant materials.

Biofilm in Implant Infections: Its Production and Regulation

A significant proportion of medical implants become the focus of a device-related infection, difficult to eradicate because bacteria that cause these infections live in well-developed biofilms.

Biofilm is a microbial derived sessile community characterized by cells that are irreversibly attached to a substratum or interface to each other, embedded in a matrix of extracellular polymeric substances that they have produced.

Bacterial adherence and biofilm production proceed in two steps: first, an attachment to a surface and, second, a cell-to-cell adhesion, with pluristratification of bacteria onto the artificial surface. The first step requires the mediation of bacterial surface proteins, the cardinal of which is similar to S. aureus autolysin and is denominated AtlE.

In staphylococci the matrix of extracellular polymeric substances of biofilm is a polymer of β-1,6-linked N-acetylglucosamine (PIA), whose synthesis is mediated by the ica operon. Biofilm formation is partially controlled by quorum sensing, an interbacterial communication mechanism dependent on population density.

The principal implants that can be compromised by biofilm associated infections are: central venous catheters, heart valves, ventricular assist devices, coronary stents, neurosurgical ventricular shunts, implantable neurological stimulators, arthro-prostheses, fracture-fixation devices, inflatable penile implants, breast implants, cochlear implants, intra-ocular lenses, dental implants.

Biofilms play an important role in the spread of antibiotic resistance. Within the high dense bacterial population, efficient horizontal transfer of resistance and virulence genes takes place.

In the future, treatments that inhibit the transcription of biofilm controlling genes might be a successful strategy in inhibiting these infections.

Molecular Genetics of Staphylococcus Epidermidis Biofilms on Indwelling Medical Devices

Staphylococcus epidermidis is an opportunistic pathogen associated with foreign body infections and nosocomial sepsis. The pathogenicity of S. epidermidis is mostly due to its ability to colonize indwelling polymeric devices and form a thick, multilayered biofilm. Biofilm formation is a major problem in treating S. epidermidis infection as biofilms provide significant resistance to antibiotics and to components of the innate host defenses. Various cell surface associated bacterial factors play a role in adherence and accumulation of the biofilm such as the polysaccharide intercellular adhesin and the autolysin AtlE. Furthermore, recent studies have shown that global regulators such as the agr quorum sensing system, the transcriptional regulator sarA and the alternative sigma factor sigB have an important function in the regulation of biofilm formation. Understanding the many complex mechanisms involved in biofilm formation is a key factor in the search for new anti-staphylococcal therapeutics.

Antimicrobial and Antifouling Strategies for Polymeric Medical Devices

Hospital-acquired infections arising from implanted polymeric medical devices continue to pose a significant challenge for medical professionals and patients. Often times, these infections arise from biofilm accumulation on the device, which is difficult to eradicate and usually requires antibiotic treatment and device removal. In response, significant efforts have been made to design functional polymeric devices or coatings that possess antimicrobial or antifouling properties that limit biofilm formation and subsequent infection by inhibiting or eliminating bacteria near the device surface or by limiting the initial attachment of proteins and bacteria. In this Viewpoint, we highlight the magnitude of device-associated infections, the role of biofilm formation in human pathogenesis, and recent advances in antimicrobial and antifouling polymers, as well as current strategies employed in commercial devices for preventing infection.

Staphylococcus Biofilm Components as Targets for Vaccines and Drugs

Staphylococci have become the most common cause of nosocomial infections, especially in patients with predisposing factors such as indwelling or implanted foreign polymer bodies. The pathogenesis of foreign-body associated infections with S. aureus and S. epidermidis is mainly related to the ability of these bacteria to form thick, adherent multilayered biofilms. In a biofilm, staphylococci are protected against antibiotic treatment and attack from the immune system, thus making eradication of the infections problematic. This necessitates the discovery of novel prophylactic and therapeutic strategies to treat these infections. In this review, we provide an overview of staphylococcal biofilm components and discuss new possible approaches to controlling these persistent biofilm-dwelling bacteria.

Combating Implant Infections. Remarks by a Women's Team

Research on implant infections requires cooperative efforts and integration between basic and clinical expertises. An international group of women scientists is acting together in this field. The main research topics of the participants of this group are described. Formation of bacterial biofilms, antibiotic resistance and production of virulence factors like adhesins and toxins are investigated. New biomaterials, coatings and drugs designed to inhibit microbial adhesion are evaluated, and infection-resistant biomaterials are under study, such as a novel heparinizable polycarbonate-urethane (Bionate) or incorporation of diamino-diamide-diol (PIME) to reduce bacterial attachment. The correlation between biofilm production and the accessory-gene-regulator (agr) is investigated in Staphylococcus aureus. The ability to form biofilm has also been shown to be one of the important virulence factors of Enterococcus faecalis, favouring colonization of inert and biological surfaces. The study of quorum sensing has led to the discovery of a quorum sensing inhibitor termed RIP that suppresses staphylococcal biofilm and infections. The immune response and the local defence mechanisms of the host against implant-associated infections, activation and infiltration of immunocompetent cells into the sites of infection have been studied in patients with implant-associated osteomyelitis. Production of monoclonal antibodies (mAbs) as possible vaccines against the staphylococcal collagen-binding MSCRAMMs is in progress. (Int J Artif Organs 2008; 31: 858–64)

Innovative Methods of Rapid Bacterial Quantification and Applicability in Diagnostics and in Implant Materials Assessment

In recent years, a variety of new technologies have been proposed that allow rapid qualitative and quantitative microbiological analyses. In this paper we discuss the urgent needs for reliable and rapid microbiological analytical techniques in different applicative fields involving the research, production and medical application of implant materials, and the potential benefits derived from the use of new methods for rapid bacterial quantification. Current compendial methods are easy to perform and have gained confidence over their long period of use, but the supplemental use of new technologies could represent real breakthroughs whenever sensitive and rapid responses are urgently required and not met by the tests currently in use. Overall, the new microbiological methods require critical evaluation depending on their specific type of application and they may still not be thought of as totally substitutive, but they certainly exhibit considerable potential for different areas of biomaterials, as well as for advanced therapy medicinal and tissue engineering treatments.

Perspectives on DNA Vaccines. Targeting Staphylococcal Adhesins to Prevent Implant Infections

DNA vaccines consist of a plasmid DNA genetically engineered to produce one or more proteins able to elicit protective immune responses against virulence factors of infectious pathogens. Once introduced into the cells of the host, a DNA vaccine induces a high production of antigens by the endogenous presence of the peptide codifying gene; improves antigen processing and presentation; may be able to simultaneously co-express multiple antigenic molecules; and, lastly, switches on both humoral and cellular immune responses. In this mini-review, we underscore the advantageous characteristics of DNA vaccines compared with traditional ones and provide summaries of some of the more recent studies on them, mainly focusing the possibility of their use in targeting the staphylococcal adhesins that play a key role in the first adhesive phase of implant infections.

Pathogenic Mechanisms and Host Interactions in Staphylococcus epidermidis Device-Related Infection

Staphylococcus epidermidis is a permanent member of the normal human microbiota, commonly found on skin and mucous membranes. By adhering to tissue surface moieties of the host via specific adhesins, S. epidermidis is capable of establishing a lifelong commensal relationship with humans that begins early in life. In its role as a commensal organism, S. epidermidis is thought to provide benefits to human host, including out-competing more virulent pathogens. However, largely due to its capacity to form biofilm on implanted foreign bodies, S. epidermidis has emerged as an important opportunistic pathogen in patients receiving medical devices. S. epidermidis causes approximately 20% of all orthopedic device-related infections (ODRIs), increasing up to 50% in late-developing infections. Despite this prevalence, it remains underrepresented in the scientific literature, in particular lagging behind the study of the S. aureus. This review aims to provide an overview of the interactions of S. epidermidis with the human host, both as a commensal and as a pathogen. The mechanisms retained by S. epidermidis that enable colonization of human skin as well as invasive infection, will be described, with a particular focus upon biofilm formation. The host immune responses to these infections are also described, including how S. epidermidis seems to trigger low levels of pro-inflammatory cytokines and high levels of interleukin-10, which may contribute to the sub-acute and persistent nature often associated with these infections. The adaptive immune response to S. epidermidis remains poorly described, and represents an area which may provide significant new discoveries in the coming years.

Surface analysis of nitrogen plasma-treated C60/PS nanocomposite films for antibacterial activity

The influence of N₂ plasma on the antibacterial properties of polystyrene/fullerene (C₆₀/PS) nanocomposite films with two concentrations is investigated. A comparison is made between the surface characteristics of the films before and after plasma irradiation for different time intervals. The alterations induced on the surface of the films after treatment are analyzed by contact angle and surface energy measurements, FTIR spectroscopy, and atomic force microscopy. The antibacterial properties, growth, biofilm formation, and adhesion of the nanocomposite films against two multidrug-resistant bacterial strains, Staphylococcus aureus KT337489 and Pseudomonas aeruginosa KT337488, are investigated before and after plasma irradiation. The results indicate that P. aeruginosa is more sensitive to treatment than S. aureus as well as an enhancement of the anti-adhesion of both strains to treated surfaces through exposure.

The osteoblast as an inflammatory cell: production of cytokines in response to bacteria and components of bacterial biofilms

BACKGROUND

Implant infections are a major complication in the field of orthopaedics. Bacteria attach to the implant-surface and form biofilm-colonies which makes them difficult to treat. Not only immune cells exclusively respond to bacterial challenges, but also local tissue cells are capable of participating in defense mechanisms. The aim of this study was to evaluate the role of osteoblasts in the context of implant infections.

METHODS

Primary osteoblasts were cultivated and stimulated with free-swimming bacteria at 4 °C and 37 °C. Supernatants were harvested for ELISA and expression of pro-inflammatory cytokines evaluated by RT-PCR. Bacterial binding to osteoblasts was evaluated using cytofluorometry and uptake was investigated by (3)H thymidine-labelling of bacteria. Osteoblasts were additionally stimulated with the extracellular polymeric substance (EPS) of Staphylococcus epidermidis biofilms, as well as components of the EPS; the bacterial heat shock protein GroEL in particular.

RESULTS

We demonstrated that binding of bacteria to the osteoblast cell surface leads to an increased production of pro-inflammatory cytokines. Bacteria are capable of surviving intracellular. Furthermore, osteoblasts do not only respond to free-swimming, planktonic bacteria, but also to components of the EPS, including lipoteichoic acid and the heat shock protein GroEL.

CONCLUSION

In conclusion, local tissue cells, specifically osteoblasts, might contribute to the persistence of the inflammatory response associated with implant-infections.

Biofilm-based implant infections in orthopaedics

The demand for joint replacement surgery is continuously increasing with rising costs for hospitals and healthcare systems. Staphylococci are the most prevalent etiological agents of orthopedic infections. After an initial adhesin-mediated implant colonization, Staphylococcus aureus and Staphylococcus epidermidis produce biofilm. Biofilm formation proceeds as a four-step process: (1) initial attachment of bacterial cells; (2) cell aggregation and accumulation in multiple cell layers; (3) biofilm maturation and (4) detachment of cells from the biofilm into a planktonic state to initiate a new cycle of biofilm formation elsewhere. The encasing of bacteria in biofilms gives rise to insuperable difficulties not only in the treatment of the infection, but also in assessing the state and the nature of the infection using traditional cultural methods. Therefore, DNA-based molecular methods have been developed to provide rapid identification of all microbial pathogens. To combat biofilm-centered implant infections, new strategies are being developed, among which anti-infective or infective-resistant materials are at the forefront. Infection-resistant materials can be based on different approaches: (i) modifying the biomaterial surface to give anti-adhesive properties, (ii) doping the material with antimicrobial substances, (iii) combining anti-adhesive and antimicrobial effects in the same coating, (iv) designing materials able to oppose biofilm formation and support bone repair.

Bacterial adhesion to poly-(D,L)lactic acid blended with vitamin E: toward gentle anti-infective biomaterials

Anti-infective properties of biomedical materials are often achieved by loading or coating them with powerful bactericides. Undesirably, these bioactive molecules can damage the host cells at the biomaterial-tissues interface and, sometimes, even determine systemic toxic effects. The search for biomaterials able to actively resist infection while displaying a safe cytocompatibility profile toward eukaryotic cells is being progressively developed. Poly-(D,L)lactic acid (PLA) is a broadly used resorbable material with established biocompatibility properties. The dissolving surfaces of a biodegradable material tend to be per se elusive for bacteria. Here, films of pristine PLA, of PLA blended with vitamin E (VitE) and PLA blended with vitamin E acetate (VitE ac) were challenged in vitro with the biofilm-producers Staphylococcus epidermidis RP62A and Staphylococcus aureus ATCC25923. The bacterial adhesion properties of the different materials were investigated on small film disc specimens by a method based on microtiter plates. Adherent bacteria were quantified by both CFU plating and bioluminescence. Significant decrease in bacterial adhesion and biofilm accumulation was found on the surface of both the enriched polymers. These findings, together with the favorable intrinsic properties of PLA and the desirable bioactivities conferred by VitE, point up the VitE-blended PLA polymers as gentle anti-infective biomaterials.

The macrophage inflammatory proteins MIP1α (CCL3) and MIP2α (CXCL2) in implant-associated osteomyelitis: linking inflammation to bone degradation

Bacterial infections of bones remain a serious complication of endoprosthetic surgery. These infections are difficult to treat, because many bacterial species form biofilms on implants, which are relatively resistant towards antibiotics. Bacterial biofilms elicit a progressive local inflammatory response, resulting in tissue damage and bone degradation. In the majority of patients, replacement of the prosthesis is required. To address the question of how the local inflammatory response is linked to bone degradation, tissue samples were taken during surgery and gene expression of the macrophage inflammatory proteins MIP1α (CCL3) and MIP2α (CXCL2) was assessed by quantitative RT-PCR. MIPs were expressed predominantly at osteolytic sites, in close correlation with CD14 which was used as marker for monocytes/macrophages. Colocalisation of MIPs with monocytic cells could be confirmed by histology. In vitro experiments revealed that, aside from monocytic cells, also osteoblasts were capable of MIP production when stimulated with bacteria; moreover, CCL3 induced the differentiation of monocytes to osteoclasts. In conclusion, the multifunctional chemokines CCL3 and CXCL2 are produced locally in response to bacterial infection of bones. In addition to their well described chemokine activity, these cytokines can induce generation of bone resorbing osteoclasts, thus providing a link between bacterial infection and osteolysis.

A review of the biomaterials technologies for infection-resistant surfaces

Anti-infective biomaterials need to be tailored according to the specific clinical application. All their properties have to be tuned to achieve the best anti-infective performance together with safe biocompatibility and appropriate tissue interactions. Innovative technologies are developing new biomaterials and surfaces endowed with anti-infective properties, relying either on antifouling, or bactericidal, or antibiofilm activities. This review aims at thoroughly surveying the numerous classes of antibacterial biomaterials and the underlying strategies behind them. Bacteria repelling and antiadhesive surfaces, materials with intrinsic antibacterial properties, antibacterial coatings, nanostructured materials, and molecules interfering with bacterial biofilm are considered. Among the new strategies, the use of phages or of antisense peptide nucleic acids are discussed, as well as the possibility to modulate the local immune response by active cytokines. Overall, there is a wealth of technical solutions to contrast the establishment of an implant infection. Many of them exhibit a great potential in preclinical models. The lack of well-structured prospective multicenter clinical trials hinders the achievement of conclusive data on the efficacy and comparative performance of anti-infective biomaterials.

A review of the clinical implications of anti-infective biomaterials and infection-resistant surfaces

Infection is currently regarded as the most severe and devastating complication associated to the use of biomaterials. The important social, clinical and economic impacts of implant-related infections are promoting the efforts to obviate these severe diseases. In this context, the development of anti-infective biomaterials and of infection-resistant surfaces is being regarded as the main strategy to prevent the establishment of implant colonisation and biofilm formation by bacteria. In this review, the attention is focused on the biomaterial-associated infections, from which the need for anti-infective biomaterials originates. Biomaterial-associated infections differ markedly for epidemiology, aetiology and severity, depending mainly on the anatomic site, on the time of biomaterial application, and on the depth of the tissues harbouring the prosthesis. Here, the diversity and complexity of the different scenarios where medical devices are currently utilised are explored, providing an overview of the emblematic applicative fields and of the requirements for anti-infective biomaterials.

Periprosthetic Joint Infection: What is on the Horizon?

Periprosthetic joint infection (PJI) will emerge as one of the most important issues for both orthopedic surgeons and researchers active in the field over the coming decades. Although the rate of PJI has not changed significantly over the past decade, the affected patients (hosts) being treated often present with more comorbidities than in the past, and the organisms responsible for these infections are evolving to become more difficult to treat. Fortunately, though, major strides in basic, translational, and clinical research have occurred in recent years that have armed the clinician with an armamentarium of techniques and technologies to better diagnose, prevent, and treat PJI. Advances in diagnostics, including refinements in established biomarkers, the introduction of point of service tests, developments in molecular techniques, and new techniques in advanced imaging will allow us to correctly identify the infecting pathogens and their virulence factors. Utilizing developed risk indexes to stratify and medically optimize our patients, modifying implants to incorporate antimicrobial and anti-biofilm properties, and developing clinically applicable vaccines and biofilm inhibiting enzymes will address our struggles in preventing PJI. Success of our future treatment strategies will hinge on refining the indications and technique of our current surgical procedures as well as the rational use of biofilm disrupting technologies and photodynamic therapy. Finally, the field of metabolomics, though still relatively in its infancy, likely holds the key to a novel diagnostic and treatment approach to infection and a more profound understanding of the pathophysiology of PJI on the human body.

Interactions of Staphylococci with Osteoblasts and Phagocytes in the Pathogenesis of Implant-Associated Osteomyelitis

In spite of great advancements in the field of biomaterials and in surgical techniques, the implant of medical devices is still associated with a high risk of bacterial infection. Implant-associated osteomyelitis is a deep infection of bone around the implant. The continuous inflammatory destruction of bone tissues characterizes this serious bone infectious disease. Staphylococcus aureus and Staphylococcus epidermidis are the most prevalent etiologic agents of implant-associated infections, together with the emerging pathogen Staphylococcus lugdunensis. Various interactions between staphylococci, osteoblasts, and phagocytes occurring in the peri-prosthesis environment play a crucial role in the pathogenesis of implant-associated osteomyelitis. Here we focus on two main events: internalization of staphylococci into osteoblasts, and bacterial interactions with phagocytic cells.

Adsorption behavior of human plasma fibronectin on hydrophobic and hydrophilic Ti6Al4V substrata and its influence on bacterial adhesion and detachment

Biomaterial implant-associated infections, a common cause of medical devices' failure, are initiated by bacterial adhesion to an adsorbed protein layer on the implant material surface. In this study, the influence of protein surface orientation on bacterial adhesion has been examined using three clinically relevant bacterial strains known to express specific binding sites for human plasma fibronectin (HFN). HFN was allowed to adsorb on hydrophobic Ti6Al4V and physically modified hydrophilic Ti6Al4V substrata. Ellipsometric data reveal that the characteristics of the adsorbed protein layers primary depend on solid surface tension and the initial protein concentration in solution. In particular, HFN molecules adopt a more extended conformation on hydrophobic than hydrophilic surfaces, an effect that is more pronounced at low than at high initial protein concentrations. Moreover, the extended conformation of the protein molecules on these surfaces likely facilitates the exposure of specific sites for adhesion, resulting in the higher bacterial-cell attachment observed regardless of the strain considered. Contact angle measurements and the analysis of the number of remaining adhering cells after being subjected to external forces further suggest that both specific and nonspecific (hydrophobic) interactions play an important role on bacterial attachment. This study is the first one to evaluate the influence of surface hydrophobicity on protein adsorption and its subsequent effect on bacterial adhesion using a material whose hydrophobicity was not modified using chemical treatments that potentially led to surface properties changes other than hydrophobicity.

Infection of orthopedic implants with emphasis on bacterial adhesion process and techniques used in studying bacterial-material interactions

Staphylococcus comprises up to two-thirds of all pathogens in orthopedic implant infections and they are the principal causative agents of two major types of infection affecting bone: septic arthritis and osteomyelitis, which involve the inflammatory destruction of joint and bone. Bacterial adhesion is the first and most important step in implant infection. It is a complex process influenced by environmental factors, bacterial properties, material surface properties and by the presence of serum or tissue proteins. Properties of the substrate, such as chemical composition of the material, surface charge, hydrophobicity, surface roughness and the presence of specific proteins at the surface, are all thought to be important in the initial cell attachment process. The biofilm mode of growth of infecting bacteria on an implant surface protects the organisms from the host immune system and antibiotic therapy. The research for novel therapeutic strategies is incited by the emergence of antibiotic-resistant bacteria. This work will provide an overview of the mechanisms and factors involved in bacterial adhesion, the techniques that are currently being used studying bacterial-material interactions as well as provide insight into future directions in the field.

Adhesion of Staphylococcus epidermidis to biomaterials is inhibited by fibronectin and albumin

Decades of contradictory results have obscured the exact role of adsorbed fibronectin in the adhesion of the bacterium, Staphylococcus epidermidis, to biomaterials. Here, the ability of adsorbed fibronectin (FN) or bovine serum albumin (BSA) to modulate S. epidermidis adhesion to various biomaterials is reported. FN or BSA was adsorbed in increasing surface densities up to saturated monolayer coverage onto various common biomaterials, including poly(ethylene terephthalate), fluorinated ethylene propylene, poly(ether urethane), silicone, and borosilicate glass. Despite the wide range of surface characteristics represented, adsorption isotherms varied only subtly between materials for the two proteins considered. S. epidermidis adhesion to the various protein-coated biomaterials was quantified in a static-fluid batch adhesion assay. Although slight differences in overall adherent cell numbers were observed between the various protein-coated substrata, all materials exhibited significant dose-dependent decreases in S. epidermidis adhesion with increasing adsorption of either protein (FN, BSA) to all surfaces. Results here indicate that S. epidermidis adhesion to FN-coated surfaces is not a specific adhesion (i.e., receptor: ligand) mediated process, as no significant difference in adhesion was found between FN- and BSA-coated materials. Rather, results indicate that increasing surface density of either FN or BSA actually inhibited S. epidermidis adhesion to all biomaterials examined.

Biofilm formation in Staphylococcus implant infections. A review of molecular mechanisms and implications for biofilm-resistant materials

Implant infections in orthopaedics, as well as in many other medical fields, are chiefly caused by staphylococci. The ability of growing within a biofilm enhances the chances of staphylococci to protect themselves from host defences, antibiotic therapies, and biocides. Advances in scientific knowledge on structural molecules (exopolysaccharide, proteins, teichoic acids, and the most recently described extracellular DNA), on the synthesis and genetics of staphylococcal biofilms, and on the complex network of signal factors that intervene in their control are here presented, also reporting on the emerging strategies to disrupt or inhibit them. The attitude of polymorphonuclear neutrophils and macrophages to infiltrate and phagocytise biofilms, as well as the ambiguous behaviour exhibited by these innate immune cells in biofilm-related implant infections, are here discussed. Research on anti-biofilm biomaterials is focused, reviewing materials loaded with antibacterial substances, or coated with anti-adhesive/anti-bacterial immobilized agents, or surfaced with nanostructures. Latter approaches appear promising, since they avoid the spread of antibacterial substances in the neighbouring tissues with the consequent risk of inducing bacterial resistance.