The functional expression of human bone-derived cells grown on rapidly resorbable calcium phosphate ceramics

Technological Challenges of Phosphorus Removal in High-Phosphorus Ores: Sustainability Implications and Possibilities for Greener Ore Processing

With the present rates of iron ore consumption, currently unusable, high-phosphorus iron ore deposits are likely to be the iron ores of the future as higher-grade iron ore reserves are depleted. Consequently, the design and timely development of environmentally-benign processes for the simultaneous beneficiation of high-phosphorus iron ores and phosphorus recovery, currently a technological challenge, might soon become a sustainability challenge. To stimulate interest in this area, phosphorus adsorption and association in iron oxides/hydroxyoxides, and current efforts at its removal, have been reviewed. The important properties of the most relevant crystalline phosphate phases in iron ores are highlighted, and insights provided on plausible routes for the development of sustainable phosphorus recovery solutions from high-phosphorus iron ores. Leveraging literature information from geochemical investigations into phosphorus distribution, speciation, and mobility in various natural systems, key knowledge gaps that are vital for the development of sustainable phosphorus removal/recovery strategies and important factors (white spaces) not yet adequately taken into consideration in current phosphorus removal/recovery solutions are highlighted, and the need for their integration in the development of future phosphorus removal/recovery solutions, as well as their plausible impacts on phosphorus removal/recovery, are put into perspective.

Bone regeneration with a collagen model polypeptides/α-tricalcium phosphate sponge in a canine tibia defect model

INTRODUCTION

We evaluated the effects of synthesized collagen model polypeptides consisting of a proline-hydroxyproline-glycine (poly(PHG)) sequence combined with porous alpha-tricalcium phosphate (α-TCP) particles on bone formation in a canine tibia defect model.

MATERIALS AND METHODS

The porous α-TCP particles were mixed with a poly(PHG) solution, and the obtained sponge was then cross-linked and characterized by x-ray diffraction and scanning electron microscopy. Tibia defects were analyzed in 12 healthy beagles using microcomputed tomography and histological evaluation.

RESULTS

At 2 and 4 weeks, the volume density of new bone was higher in the poly(PHG)/α-TCP group than in poly(PHG) alone group (P < 0.05); however, there was no difference at 8 weeks (P > 0.05). Histological evaluation at 4 weeks after implantation revealed that the poly(PHG) had degraded, and newly formed bone was present on the surface of the α-TCP particles. At 8 weeks, continuous cortical bone formation with a Haversian structure covered the top of the bone defects in both groups.

CONCLUSION

This study demonstrates that the composite created using porous α-TCP particles and poly(PHG) is sufficiently adaptable for treating bone defects.

Toward smart implant synthesis: bonding bioceramics of different resorbability to match bone growth rates

Craniofacial reconstructive surgery requires a bioactive bone implant capable to provide a gradual resorbability and to adjust to the kinetics of new bone formation during healing. Biomaterials made of calcium phosphate or bioactive glasses are currently available, mainly as bone defect fillers, but it is still required a versatile processing technique to fabricate composition-gradient bioceramics for application as controlled resorption implants. Here it is reported the application of rapid prototyping based on laser cladding to produce three-dimensional bioceramic implants comprising of a calcium phosphate inner core, with moderate in vitro degradation at physiological pH, surrounded by a bioactive glass outer layer of higher degradability. Each component of the implant is validated in terms of chemical and physical properties, and absence of toxicity. Pre-osteoblastic cell adhesion and proliferation assays reveal the adherence and growth of new bone cells on the material. This technique affords implants with gradual-resorbability for restoration of low-load-bearing bone.

Development of a novel calcium phosphate cement composed mainly of calcium sodium phosphate with high osteoconductivity

Two novel calcium phosphate cements (CPC) have been developed using calcium sodium phosphate (CSP) as the main ingredient. The first of these cements, labeled CAC, contained CSP, α-tricalcium phosphate (TCP), and anhydrous citric acid, whereas the second, labeled CABC, contained CSP, α-TCP, β-TCP, and anhydrous citric acid. Biopex(®)-R (PENTAX, Tokyo, Japan), which is a commercially available CPC (Com-CPC), and OSferion(®) (Olympus Terumo Biomaterials Corp., Tokyo, Japan), which is a commercially available porous β-TCP, were used as reference controls for analysis. In vitro analysis showed that CABC set in 5.7 ± 0.3 min at 22 °C and had a compressive strength of 86.0 ± 9.7 MPa after 5 days. Furthermore, this material had a compressive strength of 26.7 ± 3.7 MPa after 2 h in physiologic saline. CAC showed a statistically significantly lower compressive strength in the presence of physiologic saline and statistically significantly longer setting times than those of CABC. CABC and CAC exhibited apatite-forming abilities in simulated body fluid that were faster than that of Com-CPC. Samples of the materials were implanted into the femoral condyles of rabbits for in vivo analysis, and subsequent histological examinations revealed that CABC exhibited superior osteoconductivity and equivalent bioresorbability compared with Com-CPC, as well as superior osteoconductivity and bioresorbability compared with CAC. CABC could therefore be used as an alternative bone substitute material.

In vivo evaluation of calcium polyphosphate for bone regeneration

Current problems associated with bone allografts include risk of disease transmission, limited availability, and cost. Synthetic scaffolds have been proposed as substitute graft materials to address these issues. Calcium polyphosphate is a novel synthetic scaffold material that has shown good mechanical properties and biocompatibility. Here, we evaluated calcium polyphosphate in terms of its ability to support cell proliferation and differentiation in vivo. Calcium polyphosphate, morsellized cancellous bone, and hydroxyapatite/tricalcium phosphate particles were seeded with marrow stromal cells and implanted subcutaneously in the back of NOD/Scid mice. At 7, 14, and 28 days the samples were harvested and the proliferation characteristics and gene expression were analyzed. All tested graft materials had similar proliferation characteristics and gene expression. The subcutaneous environment had a stronger impact on the proliferation and differentiation of the cells than the scaffold material itself. However, it was shown that calcium polyphosphate is superior to hydroxyapatite/tricalcium phosphate and bone in its ability to support cell survival in vivo. The study confirmed that calcium polyphosphate has potential for replacing morsellized cancellous bone as a graft material for bone regeneration.

Calcium phosphate combination biomaterials as human mesenchymal stem cell delivery vehicles for bone repair

A new class of biomimetic, bioresorbable apatitic calcium phosphate cement (CPC) was recently developed. The handling characteristics, and the ability to harden at body temperature in the presence of physiological saline, make this material an attractive clinical bone substitute and delivery vehicle for therapeutic agents in orthopedic applications. The major challenge with the material is formulating an injectable paste with options for cell delivery, in order to regenerate new bone faster and with high quality. In this study, three different additives and/or viscosity modifiers (carboxymethylcellulose, silk, and alginate) were incorporated into a CPC matrix. Injectability, cell viability, cell proliferation, surface morphology, and gene expression for osteogenesis of hMSCs were all evaluated. Injectable CPC-gel composites with cell protection were achieved. The CPC modified with alginate provided the best results based on cell proliferation, ALP and collagen production, and osteogenic transcript increases (for ALP, type I collagen, BSP, and OP). Furthermore, osteogenic analysis indicated lineage-specific differentiation of hMSCs into osteogenic outcomes. The results suggest that CPC mixed with alginate can be used as a cell delivery vehicle for bone regeneration.

Effect of bone graft substitute on marrow stromal cell proliferation and differentiation

Marrow stromal cells (MSCs) are ideally suited for tissue engineered bone grafts since they have the potential to regenerate bone, but may also maintain the homeostasis of the repaired tissue through their ability for self-renewal. An ideal bone graft substitute should support MSC self-renewal as well as differentiation to ensure complete bone defect regeneration and maintenance. The purpose of this investigation was to determine the effect of different substrate materials on MSC expansion and differentiation. Calcium polyphosphate (CPP), bone and hydroxyapatite/tricalcium phosphate (HA/TCP) were seeded with rat MSCs and maintained in culture conditions that promote cell expansion. At 0, 3, 7, 14, and 21 days cell numbers were determined by measuring their metabolic activity using a MTT assay and the frequency of cycling cells by 24 hr BrdU incorporation. Osteogenic, chondrogenic, and adipogenic marker expression in these cultures was measured by qRT-PCR. An initial drop in cell numbers was observed on all substrates. CPP and bone, but not HA/TCP supported an increase in proliferating cells at day 14 and 21. In addition, no upregulation of mature bone markers was observed in cells cultured on CPP and bone, which suggests that these substrates support the expansion of undifferentiated MSCs. In contrast, cell numbers on HA/TCP decreased with time and only rare BrdU positive cells were observed. This decrease in proliferation correlated with the down regulation of osteogenic progenitor markers and the substantial increase in mature osteocyte markers, indicating that HA/TCP favors MSC differentiation and maturation along the osteogenic lineage.

Relationships between degradability of silk scaffolds and osteogenesis

Bone repairs represent a major focus in orthopedic medicine with biomaterials as a critical aspect of the regenerative process. However, only a limited set of biomaterials are utilized today and few studies relate biomaterial scaffold design to degradation rate and new bone formation. Matching biomaterial remodeling rate towards new bone formation is important in terms of the overall rate and quality of bone regeneration outcomes. We report on the osteogenesis and metabolism of human bone marrow derived mesenchymal stem cells (hMSCs) in 3D silk scaffolds. The scaffolds were prepared with two different degradation rates in order to study relationships between matrix degradation, cell metabolism and bone tissue formation in vitro. SEM, histology, chemical assays, real-time PCR and metabolic analyses were assessed to investigate these relationships. More extensively mineralized ECM formed in the scaffolds designed to degrade more rapidly, based on SEM, von Kossa and type I collagen staining and calcium content. Measures of osteogenic ECM were significantly higher in the more rapidly degrading scaffolds than in the more slowly degrading scaffolds over 56 days of study in vitro. Metabolic analysis, including glucose and lactate levels, confirmed the degradation rate differences with the two types of scaffolds, with the more rapidly degrading scaffolds supporting higher levels of glucose consumption and lactate synthesis by the hMSCs upon osteogenesis, in comparison to the more slowly degrading scaffolds. The results demonstrate that scaffold degradation rates directly impact the metabolism of hMSCs, and in turn the rate of osteogenesis. An understanding of the interplay between cellular metabolism and scaffold degradability should aid in the more rational design of scaffolds for bone regeneration needs both in vitro and in vivo.

Appositional Bone Formation by OCP-Collagen Composite

Synthetic octacalcium phosphate (OCP) has been shown to enhance bone formation and to biodegrade if implanted into bone defects. Here, we hypothesized that an OCP-atelocollagen complex (OCP/Col) is biodegradable and can induce bone formation in a thickness-dependent manner when implanted into the calvaria. OCP/Col disks (diameter, 9 mm; thickness, 1 or 3 mm) were implanted into a subperiosteal pocket in the calvaria of 12-week-old Wistar rats for 4, 8, and 12 weeks and subsequent bone formation was monitored. X-ray diffraction analysis and Fourier transform infrared spectroscopy showed that OCP in the OCP/Col implants was converted into a carbonate-rich apatite after 4 weeks. Although thinner disks tended to be replaced by new bone, thicker disks were progressively resorbed by osteoclast-like cells until 12 weeks, possibly via the increased mechanical load in the subperiosteal pocket. Therefore, OCP/Col can increase appositional intra-membranous bone formation if the appropriate size of the implant is applied.

Bone growth is enhanced by novel bioceramic coatings on Ti alloy implants

Calcium phosphate ceramics are widely used as coating materials to orthopedic implants and are found to enhance initial bony ingrowth by stimulating osseous apposition to the implant surface. In this study, two novel calcium orthophosphate materials were selected for coating onto the commonly used orthopedic implant material Ti-6Al- 4V. One was calcium alkali orthophosphate with the crystalline phase Ca10[K/Na](PO4)7 with a small addition of SiO2 (AW-Si) and the other was calcium orthophosphate composed of 70 mol % fluorapatite, Ca10(PO4)6F2 and 30 mol % CaZr4(PO4)6 (FA7Z). The coated implants were placed in cortical and cortico-cancellous bone of sheep femur for six weeks. Retrieved samples were tested for osseointegration and mechanical strength. It was found that both coatings produced enhanced bone/implant contact rate compared to the control when implanted in cortico-cancellous bone. This study demonstrates that the two coatings have the capability of encouraging bone growth, and hence the potential for being used as coating materials on Ti implants.

Effect of beta-tricalcium phosphate particles with varying porosity on osteogenesis after sinus floor augmentation in humans

This study examines the effect of two beta-tricalcium phosphate (TCP) particulate bone grafting materials with varying porosity on bone formation and on osteogenic marker expression 6 months after sinus floor augmentation. Unilateral sinus grafting was performed in 20 patients using a combination (4:1 ratio) of beta-TCP particles with 35% porosity (TCP-C) or 65% porosity (TCP-CM) and autogenous bone chips. At implant placement cylindrical biopsies were sampled and processed for immunohistochemical analysis of resin embedded sections. Sections were stained for collagen type I (Col I), alkaline phosphatase (ALP), osteocalcin (OC) and bone sialoprotein (BSP). Furthermore, the area fraction of newly formed bone as well as the particle area fraction were determined histomorphometrically first, apically close to the Schneiderian membrane and second, in the center of the cylindrical biopsies. In the TCP-CM patient group a larger amount of bone formation and particle degradation was observed in the apical area and thus at the largest distance from the crestal bone compared to the TCP-C group. Good bone bonding behaviour was observed with both materials. This was accompanied by expression of ALP, Col I, BSP and OC in the newly formed bone and osteogenic mesenchym in contact with the degrading particles. Both TCP materials supported bone formation in the augmented sinus floor. Six months after implantation of both types of beta-TCP particles, bone formation and matrix mineralization was still actively progressing in the tissue surrounding the particles. Consequently, a greater porosity appears to be advantageous for enhancing bone formation and particle degradation.

Preparation of Nano-Sized Strontium Containing Tricalcium Phosphate Particles

In this work, nano-sized strontium containing tricalcium phosphate (SrTCP) particles with different strontium content were prepared using co-precipitation method in an ice-water bath and then 800°C calcination. The AAS results show that the relative Sr/(Sr+Ca) ratios are consistent with the amount of strontium added in the initial solution but larger than the designed molar percentage. The TEM micrographs demonstrate the size of the SrTCP particles is in the region of 150-400 nm while the pure TCP particle is about 500nm. The SEM photographs show the morphology of the particles before and after incorporation of strontium and it is obvious that the particle size of SrTCP decrease with the increasing of strontium content.

A new rhenanite (β-NaCaPO4) and hydroxyapatite biphasic biomaterial for skeletal repair

Biphasic beta-rhenanite (beta-NaCaPO(4))-hydroxyapatite (Ca(10)(PO(4))(6)(OH)(2)) biomaterials were prepared by using a one-pot, solution-based synthesis procedure at the physiological pH of 7.4, followed by low-temperature (300-600 degrees C) calcination in air for 6 h. Calcination was for the sole purpose of crystallization. An aqueous solution of Ca(NO(3))(2). 4H(2)O was rapidly added to a solution of Na(2)HPO(4) and NaHCO(3), followed by immediate removal of gel-like, poorly-crystallized precursor precipitates from the mother liquors of pH 7.4. Freeze-dried precursors were found to be nanosize with an average particle size of 45 nm and a surface area of 128 m(2)/g. Upon calcination in air, precursor powders crystallized into biphasic (60% HA-40% rhenanite) biomaterials, while retaining their submicron particle sizes and high surface areas. beta-rhenanite is a high solubility sodium calcium phosphate phase. Samples were characterized by XRD, FTIR, SEM, TEM, ICP-AES, TG, DTA, DSC, and surface area measurements.

Bioceramics composition modulate resorption of human osteoclasts

Biomaterials used in bone regeneration are designed to be gradually resorbed by the osteoclast and replaced by new bone formed through osteoblastic activity. The aim of the present study is to analyze the role of osteoclasts in the resorption process. The attachment of human osteoclasts and the appearance of their resorption lacunae, when cultured on either the resorbable crystalline, calcium orthophosphate materials or on the long-term stable bioceramic material was investigated. The resorbable materials contain Ca10[K,Na](PO4)7 (AW-Si) and Ca2KNa(PO4)2 (GB14, GB9 & D9/25) as their main crystal phases, however they differ in their total solubility. These differences result from small variations in the composition. The long-term stable material consist of about 30% fluorapatite beside calcium zirconium phosphate (Ca5(PO4)3F + CaZr4(PO4)6) and shows a very small solubility. AW-Si has an alkali containing crystalline phase, Ca10[K,Na](PO4). While GB14, GB9 and D9/25 contain the crystalline phase Ca2KNa(PO4)2 with small additions of crystalline and amorphous diphosphates and/or magnesium potassium phosphate (GB14). D9/25 and AW-Si is less soluble compared to GB14, and GB9 among the resorbable materials. Resorbable and long-term stable materials vary in their chemical compositions, solubility, and surface morphology. Osteoclasts modified the surface in their attempts to resorb the materials irrespective of the differences in their physical and chemical properties. The depth and morphology of the resorption imprints were different depending on the type of material. These changes in the surface structure created by osteoclasts are likely to affect the way osteoblasts interact with the materials and how bone is subsequently formed.

Cyclosilicate nanocomposite: a novel resorbable bioactive tissue engineering scaffold for BMP and bone-marrow cell delivery

Porous bioactive resorbable silica-calcium phosphate nanocomposite (SCPC) was prepared by a sintering technique. XRD analyses showed that the main crystalline phases of the SCPC are Na(3)CaPSiO(7) (clinophosinaite), beta-NaCaPO(4) (rhenanite), Na(2)CaSiO(4), and beta-quartz (SiO(2)). The clinophosinaite is a novel cyclosilicate bioactive mineral that enhanced the mechanical and bioactivity properties of the SCPC. TEM analysis showed that the grain sizes of the multiphase SCPC are in the nanometer scale. Moreover, the SCPC was engineered with nano- and microscale porosity. The SCPC had significantly higher compressive strength than porous hydroxyapatite (HA). FTIR analyses revealed the formation of biological hydroxyapatite layer on the SCPC surface after 4 days of immersion in SBF. When SCPC was loaded with rhBMP-2, it provided a superior release profile of biologically active rhBMP-2 compared to porous HA. Bone-marrow cells incubated with medium treated with the rhBMP-2 released from the SCPC-rhBMP-2 hybrid expressed significantly higher alkaline phosphatase activity than that expressed by cells incubated with media treated with rhBMP-2 released from HA-rhBMP-2. In addition, cells attached to the SCPC-rhBMP-2 hybrid produced mineralized extracellular matrix (ECM) and bone-like tissue that covered the material surface and filled pores in the entire thickness of the template after 3 weeks in culture. In contrary, cells attached to the HA-rhBMP-2 produced limited amount of unmineralized ECM after the same time period. Results of the study strongly suggest that the porous bioactive silica-calcium phosphate nanocomposite can serve as a delivery system for cells and biological molecules. The SCPC-rhBMP-2-marrow cell hybrid may serve as an alternative to autologous bone grafting.