Hypersensitivity to metallic biomaterials: a review of leukocyte migration inhibition assays

Surface (bio)-functionalization of metallic materials: How to cope with real interfaces?

Metallic materials are an important class of biomaterials used in various medical devices, owing to a suitable combination of their mechanical properties. The (bio)-functionalization of their surfaces is frequently performed for biocompatibility requirements, as it offers a powerful way to control their interaction with biological systems. This is particularly important when physicochemical processes and biological events, mainly involving proteins and cells, are initiated at the host-material interface. This review addresses the state of "real interfaces" in the context of (bio)-functionalization of metallic materials, and the necessity to cope with it to avoid frequent improper evaluation of the procedure used. This issue is, indeed, well-recognized but often neglected and emerges from three main issues: (i) ubiquity of surface contamination with organic compounds, (ii) reactivity of metallic surfaces in biological medium, and (iii) discrepancy in (bio)-functionalization procedures between expectations and reality. These disturb the assessment of the strategies adopted for surface modifications and limit the possibilities to provide guidelines for their improvements. For this purpose, X-ray photoelectrons spectroscopy (XPS) comes to the rescue. Based on significant progresses made in methodological developments, and through a large amount of data compiled to generate statistically meaningful information, and to insure selectivity, precision and accuracy, the state of "real interfaces" is explored in depth, while looking after the two main constituents: (i) the bio-organic adlayer, in which the discrimination between the compounds of interest (anchoring molecules, coupling agents, proteins, etc) and organic contaminants can be made, and (ii) the metallic surface, which undergoes dynamic processes due to their reactivity. Moreover, through one of the widespread (bio)-functionalization strategy, given as a case study, a particular attention is devoted to describe the state of the interface at different stages (composition, depth distribution of contaminants and (bio)compounds of interest) and the mode of protein retention. It is highlighted, in particular, that the occurrence or improvement of bioactivity does not demonstrate that the chemical schemes worked in reality. These aspects are particularly essential to make progress on the way to choose the suitable (bio)-functionalization strategy and to provide guidelines to improve its efficiency.

Immunological reaction to magnesium-based implants for orthopedic applications. What do we know so far? A systematic review on in vivo studies

Magnesium-based implants (Mg) became an attractive candidate in orthopedic surgery due to their valuable properties, such as osteoconductivity, biodegradability, elasticity and mechanical strength. However, previous studies on biodegradable and non-biodegradable metal implants showed that these materials are not inert when placed in vivo as they interact with host defensive mechanisms. The aim of this study was to systematically review available in vivo studies with Mg-based implants that investigated immunological reactions to these implants. The following questions were raised: Do different types of Mg-based implants in terms of shape, size and alloying system cause different extent of immune response? and; Are there missing links to properly understand immunological reactions upon implantation and degradation of Mg-based implants? The database used for the literature research was PubMed (U.S. National Library of Medicine) and it was undertaken in the end of 2021. The inclusion criteria comprised (i) in vivo studies with bony implantation of Mg-based implants and (ii) analysis of the presence of local immune cells or systemic inflammatory parameters. We further excluded any studies involving coated Mg-implants, in vitro studies, and studies in which the implants had no bone contact. The systematic search process was conducted according to PRISMA guidelines. Initially, the search yielded 225 original articles. After reading each article, and based on the inclusion and exclusion criteria, 16 articles were included in the systematic review. In the available studies, Mg-based implants were not found to cause any severe inflammatory reaction, and only a mild to moderate inflammatory potential was attributed to the material. The timeline of foreign body giant cell formation showed to be different between the reviewed studies. The variety of degradation kinetics of different tested implants and discrepancies in studies regarding the time points of immunological investigations impair the conclusion of immunological reactions. This may be induced by different physical properties of an implant such as size, shape and alloying system. Further research is essential to elucidate the underlying mechanisms by which implant degradation affects the immune system. Also, better understanding will facilitate the decision of patients whether to undergo surgery with new device implantation.

A Review of Biomimetic Topographies and Their Role in Promoting Bone Formation and Osseointegration: Implications for Clinical Use

The use of metallic and polymeric materials for implants has been increasing over the past decade. This trend can be attributed to a variety of factors including a significant increase in basic science research focused on implant material characteristics and how various surface modifications may stimulate osseointegration and, ultimately, fusion. There are many interbody fusion devices and dental implants commercially available; however, detailed information about their surface properties, and the effects that various materials and surface modifications may have on osteogenesis, is lacking in the literature. While the concept of bone-implant osseointegration is a relatively recent addition to the spine fusion literature, there is a comparatively large body of literature related to dental implants. The purpose of this article is to summarize the science of surface modified bone-facing implants, focusing on biomimetic material chemistry and topography of titanium implants, to promote a better understanding of how these characteristics may impact bone formation and osseointegration. This manuscript has the following aspects: highlights the role of titanium and its alloys as potent osteoconductive bioactive materials; explores the importance of biomimetic surface topography at the macro-, micro- and nano-scale; summarizes how material surface design can influence osteogenesis and immune responses in vitro; focuses on the kinds of surface modifications that play a role in the process. Biomimetic surface modifications can be varied across many clinically available biomaterials, and the literature supports the hypothesis that those biomaterial surfaces that exhibit physical properties of bone resorption pits, such as roughness and complex hierarchical structures at the submicron and nanoscale, are more effective in supporting osteoblast differentiation in vitro and osteogenesis in vivo.

The Allergic Bone Marrow? The Immuno-Capacity of the Human Bone Marrow in Context of Metal-Associated Hypersensitivity Reactions

Arthroplasty ranks among the greatest achievements of surgical medicine, with total hip replacement termed “the operation of the century.” Despite its wide success, arthroplasty bears risks, such as local reactions to implant derived wear and corrosion products. Prevalence of allergies across Western society increases and along the number of reported hypersensitivity reactions to orthopedic implant materials. In this context the main focus is on delayed hypersensitivity (DTH). This mechanism is mainly attributed to T cells and an overreaction of the adaptive immune system. Arthroplasty implant materials are in direct contact with bone marrow (BM), which is discussed as a secondary lymphoid organ. However, the mechanisms of sensitization toward implant wear remain elusive. Nickel and cobalt ions can form haptens with native peptides to activate immune cell receptors and are therefore common T helper allergens in cutaneous DTH. The rising prevalence of metal-related allergy in the general population and evidence for the immune-modulating function of BM allow for the assumption hypersensitivity reactions could occur in peri-implant BM. There is evidence that pro-inflammatory factors released during DTH reactions enhance osteoclast activity and inhibit osteoblast function, an imbalance characteristic for osteolysis. Even though some mechanisms are understood, hypersensitivity has remained a diagnosis of exclusion. This review aims to summarize current views on the pathomechanism of DTH in arthroplasty with emphasis on BM and discusses recent advances and future directions for basic research and clinical diagnostics.

pH and metal concentration of synovial fluid of osteoarthritic joints and joints with metal replacements

BACKGROUND

Due to degradation and metal dissolution during articulation of metal joint replacements the chemical periprosthetic environment may change. The aim was to establish whether metal replacements cause the local changes in pH and elevated metal concentrations.

METHODS

pH was measured on samples from 167 patients: native hip and knee osteoarthritic joints, joints with hip and knee replacements revised for aseptic or septic reasons. pH of synovial fluid and periprosthetic tissue was measured perioperatively using a microelectrode and pH indicator papers for removed metal components. Metal concentrations were measured in 21 samples using inductively coupled plasma mass spectrometry.

RESULTS

The mean pH value of synovial fluid at native osteoarthritic joints (n = 101) was 7.78 ± 0.38. The mean pH value of synovial fluid at revision aseptic operation (n = 58) was 7.60 ± 0.31, with statistically significant difference (p = 0.002) compared to native osteoarthritic joints. The mean pH value of synovial fluid at revision septic operation (n = 8) was 7.55 ± 0.25, with statistically significant difference (p = 0.038) compared to native osteoarthritic joints. Measurements in tissue and at stems were not reliable. In the majority of samples taken at revision increased levels of cobalt and chromium were measured.

CONCLUSION

A small but statistically significant difference was observed in the pH of synovial fluid between natural joints with degenerative diseases and joints treated with metal replacements. Based on the increased metal levels we expected the value of pH to be lower, but the influence of metal ions is counteracted by the buffering capacity of human body. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 2507-2515, 2017.

Patient-Reported Metal Allergy: A Risk Factor for Poor Outcomes After Total Joint Arthroplasty?

BACKGROUND

Metal sensitivity after total joint arthroplasty has been of increased concern, but the impact of a patient-reported metal allergy on clinical outcomes has not been investigated. The purpose of this study was to report the incidence and impact of patient-reported metal allergy after total knee arthroplasty (TKA) and total hip arthroplasty (THA).

METHODS

This was a retrospective, institutional review board-approved investigation of patients undergoing a primary, elective total joint arthroplasty between 2009 and 2011. All patients completed a preoperative questionnaire asking about drug and environmental allergies. In January 2010, a specific question was added regarding the presence of a metal allergy. University of California at Los Angeles Activity, Short Form 12 (SF-12), Modified Harris Hip, and Knee Society scores were collected preoperatively and at most recent follow-up. Overall cohorts of metal allergy and nonmetal allergy patients were compared, and a 1:2 matching analysis was also performed.

RESULTS

Nine hundred six primary THAs and 589 primary TKAs were included. The incidence of patient-reported metal allergy was 1.7% before January 2010 and 4.0% after (overall 2.3% of THAs and 4.1% of TKAs); 97.8% of metal allergy patients were female. After TKA, postoperative Knee Society Function, Symptoms, Satisfaction, and Expectation scores were all decreased in the metal allergy cohort (P < .001-.002). After THA, metal allergy patients had a decreased postoperative SF-12 Mental Component Score and less incremental improvement in their SF-12 Mental Component Score vs the nonmetal allergy cohort (P < .0001 and P = .001, respectively).

CONCLUSION

Patient-reported metal allergy is associated with decreased functional outcomes after TKA and decreased mental health scores after THA.

Chromium (VI)-Induced Immunotoxicity and Intracellular Accumulation in Human Primary Dendritic Cells

Chromium compounds, besides being occupational carcinogens, can also induce allergic contact dermatitis (ACD) and other immunomodulatory effects. In this study we investigate cell viability, uptake and intracellular distribution of chromium in human primary dendritic cells (DCs), either immature (iDCs) or driven to differentiate by a specific maturation stimulus (LPS) (mature DCs, mDCs), when exposed for 48 h to concentrations of soluble radiolabelled Na251CrO4 ranging from 5 to 0.5 μM. The modulation of the expression of membrane markers (CD80, CD86, MHC class II) correlated with the immunological functions of DCs was also measured. After 48 h of exposure the mean IC50 values in 4 donors were 36 and 31 μM in iDCs and mDC respectively, as detected by propidium iodide incorporation. Cellular uptake of chromium was nearly linear with increasing doses. At 48 h post-exposure chromium was accumulated preferentially in the nuclear and cytosolic fractions (44.1 to 66% and 13.1 to 31% of total cellular chromium, respectively). Although a high inter-individual variability was observed, an increase in the expression of CD86 and, to a lower extent, CD80 and MHC class II membrane markers was found in mDCs of single donors. These results highlight the relevance of searching for the biodistribution of trace metals in primary cells of the immune system. Moreover, they suggest that DCs differentiation markers can help in measuring the immunotoxicity of metal

Titanium: a review on exposure, release, penetration, allergy, epidemiology, and clinical reactivity

Exposure to titanium (Ti) from implants and from personal care products as nanoparticles (NPs) is common. This article reviews exposure sources, ion release, skin penetration, allergenic effects, and diagnostic possibilities. We conclude that human exposure to Ti mainly derives from dental and medical implants, personal care products, and foods. Despite being considered to be highly biocompatible relative to other metals, Ti is released in the presence of biological fluids and tissue, especially under certain circumstances, which seem to be more likely with regard to dental implants. Although most of the studies reviewed have important limitations, Ti seems not to penetrate a competent skin barrier, either as pure Ti, alloy, or as Ti oxide NPs. However, there are some indications of Ti penetration through the oral mucosa. We conclude that patch testing with the available Ti preparations for detection of type IV hypersensitivity is currently inadequate for Ti. Although several other methods for contact allergy detection have been suggested, including lymphocyte stimulation tests, none has yet been generally accepted, and the diagnosis of Ti allergy is therefore still based primarily on clinical evaluation. Reports on clinical allergy and adverse events have rarely been published. Whether this is because of unawareness of possible adverse reactions to this specific metal, difficulties in detection methods, or the metal actually being relatively safe to use, is still unresolved.

Shoulder arthroplasty in the patient with metal hypersensitivity

The in vivo effects of metal hypersensitivity remain a topic of much debate. At the core of this debate is the possible, although still hotly contested, link between metal hypersensitivity and poorly functioning or failing implants. There are multiple studies on this topic in the hip and knee arthroplasty literature, but the applicability of this experience to shoulder arthroplasty remains unclear. Although how often metal hypersensitivity affects shoulder arthroplasty patients remains uncertain, a multitude of case reports have implicated metallic implants as a source of local and systemic allergic reactions. We recommend a cautious approach to patients with a history of metal hypersensitivity, including a careful evaluation of suspected metal hypersensitivities in all patients undergoing shoulder arthroplasty. If available, we recommend a metallic implant with low to no nickel content in patients with metal hypersensitivity. Given the large and increasing, number of total shoulder arthroplasty procedures and the high percentage of the population having a known or suspected metal hypersensitivity, this review is intended to guide and educate the shoulder surgeon in the evaluation and treatment of this patient population and to point out the areas where evidence-based recommendations are lacking.

Biodegradable magnesium-based screw clinically equivalent to titanium screw in hallux valgus surgery: short term results of the first prospective, randomized, controlled clinical pilot study

Purpose

Nondegradable steel-and titanium-based implants are commonly used in orthopedic surgery. Although they provide maximal stability, they are also associated with interference on imaging modalities, may induce stress shielding, and additional explantation procedures may be necessary. Alternatively, degradable polymer implants are mechanically weaker and induce foreign body reactions. Degradable magnesium-based stents are currently being investigated in clinical trials for use in cardiovascular medicine. The magnesium alloy MgYREZr demonstrates good biocompatibility and osteoconductive properties. The aim of this prospective, randomized, clinical pilot trial was to determine if magnesium-based MgYREZr screws are equivalent to standard titanium screws for fixation during chevron osteotomy in patients with a mild hallux valgus.

Methods

Patients (n=26) were randomly assigned to undergo osteosynthesis using either titanium or degradable magnesium-based implants of the same design. The 6 month follow-up period included clinical, laboratory, and radiographic assessments.

Results

No significant differences were found in terms of the American Orthopaedic Foot and Ankle Society (AOFAS) score for hallux, visual analog scale for pain assessment, or range of motion (ROM) of the first metatarsophalangeal joint (MTPJ). No foreign body reactions, osteolysis, or systemic inflammatory reactions were detected. The groups were not significantly different in terms of radiographic or laboratory results.

Conclusion

The radiographic and clinical results of this prospective controlled study demonstrate that degradable magnesium-based screws are equivalent to titanium screws for the treatment of mild hallux valgus deformities.

Prospective analysis of human leukocyte functional tests reveals metal sensitivity in patients with hip implant

Background

The aim of the study was to examine the reactivity of peripheral human leukocytes to various metal ions prior and following hip replacement in order to investigate implant-induced metal sensitivity.

Methods

Three patient groups were set up: (1) individuals without implants and no history of metal allergy (7 cases), (2) individuals without implants and known history of metal allergy (7 cases), and (3) patients undergoing cementless hip replacement (40 cases). Blood samples were taken in groups 1 and 2 at three different occasions; in group 3, prior and 3, 6, 12, 24, and 36 months after surgery. Peripheral leukocytes were separated and left either untreated or challenged with Ti, NiCl₂, CoCl₂, CrCl₃, and phytohemagglutinin. Cell proliferation, cytokine release, and leukocyte migration inhibition assays were performed. Metal-induced reactivity was considered when all three assays showed significant change. Skin patch tests were also carried out.

Results

Both skin patch tests and leukocyte functional tests were negative in group 1, and both were positive in group 2. In group 3, after 6 months, 12% of the patients showed reactivity to the tested metals except for NiCl₂. Following the 36-month period, 18% of group three became sensitive to metals (including all the earlier 12%). In contrast, patch tests were negative at each time point in group 3.

Conclusions

Orthopedic implant material may induce metal reactivity after implantation in a manner where susceptibility is yet to be elucidated. Leukocyte triple assay technique might be a useful tool to test implant material-related sensitivity.

Postoperative spinal infection mimicking systemic vasculitis with titanium-spinal implants

BACKGROUND

Secondary systemic vasculitis after posterior spinal fusion surgery is rare. It is usually related to over-reaction of immune-system, to genetic factors, toxicity, infection or metal allergies.

CASE DESCRIPTION

A 14 year-old girl with a history of extended posterior spinal fusion due to idiopathic scoliosis presented to our department with diffuse erythema and nephritis (macroscopic hemuresis and proteinuria) 5 months post surgery. The surgical trauma had no signs of inflammation or infection. The blood markers ESR and CRP were increased. Skin tests were positive for nickel allergy, which is a content of titanium alloy. The patient received corticosteroids systematically (hydrocortisone 10 mg) for 6 months, leading to total recess of skin and systemic reaction. However, a palpable mass close to the surgical wound raised the suspicion of a late infection. The patient had a second surgery consisting of surgical debridement and one stage revision of posterior spinal instrumentation. Intraoperative cultures were positive to Staphylococcus aureus. Intravenous antibiotics were administered. The patient is now free of symptoms 24 months post revision surgery without any signs of recurrence of either vasculitis or infection.

LITERATURE REVIEW

Systemic vasculitis after spinal surgery is exceptionally rare. Causative factors are broad and sometimes controversial. In general, it is associated with allergy to metal ions. This is usually addressed with metal on metal total hip bearings. In spinal surgery, titanium implants are considered to be inert and only few reports have presented cases with systemic vasculitides. Therefore, other etiologies of immune over-reaction should always be considered, such as drug toxicity, infection, or genetic predisposition.

PURPOSES AND CLINICAL RELEVANCE

Our purpose was to highlight the difficulties during the diagnostic work-up for systemic vasculitis and management in cases of posterior spinal surgery.

Dermatitis associated with chromium following total knee arthroplasty

All metal implants release metal ions because of corrosion. Although 20% to 25% of patients develop metal sensitivity after total joint arthroplasty, which is 10% higher than that in the general population, only very few highly susceptible patients exhibit symptoms. Even patients with known metal allergy often do not react to their metal prosthesis. Systemic allergic contact dermatitis is particularly uncommon with total knee arthroplasty because there is no metal-on-metal contact between the femoral and tibial components. We present a case report of 62-year-old man with dermatitis most likely caused by chromium after total knee arthroplasty and review the relevant literature. Although this complication is very rare, it sometimes can be painful enough for the patient to undergo revision surgery.

Biocompatible carbohydrate-functionalized stainless steel surfaces: a new method for passivating biomedical implants

A convenient method for passivating and functionalizing stainless steel is described. Several methods of coating stainless steel (SS) samples with silica were investigated and of these methods, a thin (less than 15 nm thick) layer of silica created by atomic layer deposition (ALD) was found to give superior performance in electrochemical testing. These interfaces were then used as a platform for further functionalization with molecules of biological interest. Specifically, the SS samples were functionalized with biologically significant carbohydrates [N-acetyl-D-glucosamine (GlcNAc) and D-galactose (Gal)] that contain trialkoxysilane derivatives as chemical handles for linking to the surface. The presence and biological availability of these moieties on the silica coated SS were confirmed by XPS analysis and an enzyme-linked lectin assay (ELLA) using complementary lectins that specifically recognize the surface-bound carbohydrate. This method has the potential of being adapted to the functionalization of stainless steel biomedical implants with other biologically relevant carbohydrates.

Titanium allergy: could it affect dental implant integration?

PURPOSE

Degradation products of metallic biomaterials including titanium may result in metal hypersensitivity reaction. Hypersensitivity to biomaterials is often described in terms of vague pain, skin rashes, fatigue and malaise and in some cases implant loss. Recently, titanium hypersensitivity has been suggested as one of the factors responsible for implant failure. Although titanium hypersensitivity is a growing concern, epidemiological data on incidence of titanium-related allergic reactions are still lacking.

MATERIALS AND METHODS

A computer search of electronic databases primarily MEDLINE and PUBMED was performed with the following key words: 'titanium hypersensitivity', 'titanium allergy', 'titanium release' without any language restriction. Manual searches of the bibliographies of all the retrieved articles were also performed. In addition, a complementary hand search was also conducted to identify recent articles and case reports.

RESULTS

Most of the literature comprised case reports and prospective in vivo/in vitro trials. One hundred and twenty-seven publications were selected for full text reading. The bulk of the literature originated from the orthopaedic discipline, reporting wear debris following knee/hip arthroplasties. The rest comprised osteosynthesis (plates/screws), oral implant/dental materials, dermatology/cardiac-pacemaker, pathology/cancer, biomaterials and general reports.

CONCLUSION

This review of the literature indicates that titanium can induce hypersensitivity in susceptible patients and could play a critical role in implant failure. Furthermore, this review supports the need for long-term clinical and radiographic follow-up of all implant patients who are sensitive to metals. At present, we know little about titanium hypersensitivity, but it cannot be excluded as a reason for implant failure.

Electrochemical Instrumentation of a Hip Simulator: A New Tool for Assessing the Role of Corrosion in Metal-On-Metal Hip Joints

Polyethylene wear debris induced osteolysis has triggered investigations to find alternative material combinations to the well-established metal-on-polyethylene hip implants. Owing to some early successful clinical cases, metal-on-metal (MoM) hip replacements have been attracting more and more interest. There is, however, considerable concern about the propensity of MoM hip replacements to release metal ions and fine, nanometre-scale metallic wear debris. The long-term effect from released metal ions and wear particles is still not clear.

To date, all the work on hip simulators focused on assessing mass losses damage has been referred to as ‘wear’. However, it is known in the field of tribocorrosion that mechanical removal of the passive layer on Co—Cr alloys can significantly enhance corrosion activity. In total joint replacements, it is possible that corrosion plays a significant role. However, no one has ever tried to extract, on a hip simulator, what proportion of the damage is due to mechanical processes and the corrosion processes. This paper describes the first instrumentation of an integrated hip joint simulator to provide in-situ electrochemical measurements in real time. The open circuit potential results are reported to assess the corrosion regime in the absence and presence of movement at the bearing surfaces. The importance of these measurements is that the real damage mechanisms can be assessed as a function of the operating cycle.

In vitro biocompatibility evaluation of surface-modified titanium alloys

The present work is aimed to evaluate the effects of a surface modification process on the biocompatibility of three vanadium-free titanium alloys with biomedical applications interest. Chemical composition of alloys investigated, in weight %, were Ti-7Nb-6Al, Ti-13Nb-13Zr, and Ti-15Zr-4Nb. An easy and economic method intended to improve the biocompatibiblity of these materials consists in a simple thermal treatment at high temperature, 750 degrees C, in air for different times. The significance of modification of the surface properties to the biological response was studied putting in contact both untreated and thermally treated alloys with human cells in culture, Human Umbilical Vein Endothelial Cells (HUVEC) and Human Peripheral Blood Mononuclear Cells (PBMC). The TNF-alpha release data indicate that thermal treatment improves the biological response of the alloys. The notable enhancement of the surface roughness upon oxidation could be related with the observed reduction of the TNF-alpha levels for treated alloys. A different behavior of the two cell lines may be observed, when adhesion molecules (ICAM-1 and VCAM-1 in HUVEC, ICAM-1, and LFA-1 in PBMC) were determined, PBMC being more sensitive than HUVEC to the contact with the samples. The data also distinguish surface composition and corrosion resistance as significant parameters for the biological response.

[Biodegradable synthetic implant materials : clinical applications and immunological aspects]

In the last decade biodegradable synthetic implant materials have been established for various clinical applications. Ceramic materials such as calcium phosphate, bioglass and polymers are now routinely used as degradable implants in the clinical practice. Additionally these materials are now also used as coating materials or as microspheres for controlled drug release and belong to a series of examples for applications as scaffolds for tissue engineering. Because immense local concentrations of degradation products are produced during biodegradation, this review deals with the question whether allergic immune reactions, which have been reported for classical metallic and organic implant materials, also play a role in the clinical routine for synthetic biodegradable materials. Furthermore, possible explanatory theories will be developed to clarify the lack of clinical reports on allergy or sensitization to biodegradable synthetic materials.

Orthopaedic metals and their potential toxicity in the arthroplasty patient

The long-term effects of metal-on-metal arthroplasty are currently under scrutiny because of the potential biological effects of metal wear debris. This review summarises data describing the release, dissemination, uptake, biological activity, and potential toxicity of metal wear debris released from alloys currently used in modern orthopaedics. The introduction of risk assessment for the evaluation of metal alloys and their use in arthroplasty patients is discussed and this should include potential harmful effects on immunity, reproduction, the kidney, developmental toxicity, the nervous system and carcinogenesis.

Corrosion degradation and prevention by surface modification of biometallic materials

Metals, in addition to ceramics and polymers, are important class of materials considered for replacement of non-functional parts in the body. Stainless steel 316, titanium and titanium alloys, Co-Cr, and nitinol shape memory alloys are the most frequently used metallic materials. These alloys are prone to corrosion in various extents. This review briefly discusses the important biomaterials, their properties, and the physiological environment to which these materials are exposed. Corrosion performance of currently used metallic materials has been assessed and threat to the biocompatibility from corrosion products/metal ions is discussed. The possible preventive measures to improve corrosion resistance by surface modification and to increase the bioactivity of the metallic surfaces have also been discussed. Importance of the formation of oxide layers on the metal surface, another aspect of corrosion process, has been correlated with the host response. The gap areas and future direction of research are also outlined in the paper.

Foreign body gingival lesions: distribution, morphology, identification by X-ray energy dispersive analysis and possible origin of foreign material

BACKGROUND

Foreign material may cause and aggravate gingival lesions. This is rarely considered clinically. The lesions are resistant to frequently protracted conventional therapy. The foreign material is often inconspicuous and easily overlooked by the pathologist.

METHODS

85 cases of gingival lesions containing foreign material were investigated by conventional and polarization light microscopy, focusing on the morphology and optical characteristics of the foreign substance. Supplemented with the results of X-ray energy dispersive analysis the foreign material was compared with commonly used dental materials.

RESULTS

The foreign material was most frequently compatible with amalgam. Inconspicuous crystals, often revealed only by polarization microscopy, were most commonly compatible with abrasives, particularly corundum and silicates, and mostly occurred together with amalgam dust.

CONCLUSIONS

Iatrogenic introduction of dental materials during dental procedures explains most foreign body gingival lesions which could be reduced or avoided by prophylactic measures. Pathologists should meticulously scrutinize gingival biopsies routinely applying polarization microscopy.

Effects of CNI-1493 on human granulocyte functions

During acute bacterial infections such as sepsis and meningitis, activation of inflammatory mediators such as nitric oxide (NO) plays a crucial role in both pathogenesis and host defense. We have previously reported that CNI-1493, a macrophage deactivator, reduced mortality in infant rats infected with Haemophilus influenzae type b (Hib) with associated decrease in the number of granulocytes in the infected tissue. The aim of the present study was to investigate how CNI-1493 affects granulocytes and macrophages in vitro. Murine macrophages (RAW 264.7) pre-incubated with CNI-1493 prior to activation with lipopolysaccharide (LPS)/interferon gamma (IFNgamma) had decreased NO production measured as NO(2)(-)/NO(3)(-) levels and reduction in inducible NO-synthase (iNOS) expression. Reactive oxygen species (ROS) production was increased in formylmethionyl-leucyl-phenylalanine (FMLP)-stimulated granulocytes following CNI-1493 treatment, whereas F-actin content, motility and chemotaxis were decreased under the same conditions. The effects of CNI-1493 on both NO production in LPS/IFNgamma-activated macrophages and ROS production, F-actin content, motility and chemotaxis in granulocytes, may contribute to the reduced inflammatory response and increased survival in Hib-infected animals treated with CNI-1493.

Development and application of automatic high-resolution light microscopy for cell-based screens

Large-scale microscopy-based screens offer compelling advantages for assessing the effects of genetic and pharmacological modulations on a wide variety of cellular features. However, development of such assays is often confronted by an apparent conflict between the need for high throughput, which usually provides limited information on a large number of samples, and a high-content approach, providing detailed information on each sample. This chapter describes a novel high-resolution screening (HRS) platform that is able to acquire large sets of data at a high rate and light microscope resolution using specific "reporter cells," cultured in multiwell plates. To harvest extensive morphological and molecular information in these automated screens, we have constructed a general analysis pipeline that is capable of assigning scores to multiparameter-based comparisons between treated cells and controls. This chapter demonstrates the structure of this system and its application for several research projects, including screening of chemical compound libraries for their effect on cell adhesion, discovery of novel cytoskeletal genes, discovery of cell migration-related genes, and a siRNA screen for perturbation of cell adhesion.

Screening for symptomatic metal sensitivity: a prospective study of 92 patients undergoing total knee arthroplasty

Metal sensitivity (MS) reactions to implant metals represent a rare but well-documented complication following total joint arthroplasty (TJA). Although 20-25% of post-TJA patients develop MS, only a few highly susceptible patients (< 1%) exhibit symptoms. Whether surgeons should perform screening for MS is currently a matter of debate. The present study investigated the clinical importance of screening for patients predisposed to symptomatic MS, and the specific metals causing symptomatic MS following total knee arthroplasty (TKA). Between 2000 and 2002, a total of 108 primary TKAs were performed on 92 patients. Preoperatively, all patients underwent modified lymphocyte stimulation test (mLST) to Ni, Co, Cr, and Fe. Of the 92 patients, 24 (26%) displayed positive preoperative responses to at least one metal. Five patients displayed implant metal-related eczema and were all mLST-positive preoperatively, suggesting that screening for symptomatic MS is clinically useful. Two of these underwent revision TKA and thereafter, eczema healed and mLST results changed from positive to negative. All mLST-positive patients were divided into three groups: Group I, patients with eczema; Group II, patients with clear history of MS; and Group III, patients neither eczema nor history of MS. When the type of sensitive metals were compared among the three groups, a significant association between presence of Cr-sensitivity and development of eczema (P < 0.05) was identified. No significant association was observed between other metals and development of eczema or history of MS. This indicates that Cr is a potential candidate metal for causing eczema in our TKA series, and Cr-sensitivity may offer a potential predictor for symptomatic MS. The present study indicates that the surgeons should undertake routine preoperative screening for MS, particularly to Cr.

Lymphocyte responses in patients with total hip arthroplasty

How lymphocyte-mediated metal sensitivity affects orthopaedic implant performance remains poorly understood. Do patients with implants exhibit elevated lymphocyte reactivity to metals and is this reactivity more generalized or more implant-alloy specific? We investigated these questions by measuring lymphocyte responses to implant metals (Cr(+3), Co(+2), Ni(+2) at 0.1mM, and Ti(+4) at 0.001 mM) in six subject groups: Group 1a=young controls, Group 1b=age matched controls, Group 2a=subjects with osteoarthritis (OA) and no history of metal sensitivity, Group 2b=OA subjects with history of metal sensitivity, Group 3a=total hip arthroplasty (THA) subjects with no to mild radiographic osteolysis, and Group 3b=THA subjects with moderate osteolysis. Lymphocyte proliferation, using Lymphocyte Transformation Testing (LTT), and cytokine release provided quantitative reactivity measurement, where a stimulation index of >2 indicated metal sensitivity. OA subjects with a history of metal sensitivity (Group 2b) were more metal reactive to Ni than any other group, as expected (66% incidence and Stimulation Index >20). However, THA subjects (Groups 3a and b) were >3 fold more reactive to Cr (p<0.04), than were controls (Groups 1a & b) or OA subjects (Groups 2a & b). THA subjects with moderate vs mild osteolysis (Group 3b vs 3a) were more reactive to Co (43% vs 0% incidence). Only osteolytic THA subjects demonstrated increased cytokine responses with >two-fold (p<0.05) increases in soluble interferon-gamma (IFN-gamma) and interleukin-2 (IL-2) levels in response to Cr challenge. This elevated incidence and averaged level of lymphocyte reactivity supports a metal-specific adaptive immune response and suggests involvement in the pathogenesis of poor implant performance, e.g. aseptic osteolysis.

A new austenitic stainless steel with negligible nickel content: an in vitro and in vivo comparative investigation

New nickel (Ni)-reduced stainless-steel metals have recently been developed to avoid sensitivity to Ni. In the present study, an austenitic Ni-reduced SSt named P558 (P558, Böhler, Milan, Italy) was studied in vitro on primary osteoblasts and in vivo after bone implantation in the sheep tibia, and was compared to ISO 5832-9 SSt (SSt) and Ti6Al4V. Cells were cultured directly on P558 and Ti6Al4V. Cells cultured on polystyrene were used as controls. Osteoblast proliferation, viability and synthetic activity were evaluated at 72 h by assaying WST1, alkaline phosphatase activity (ALP), nitric oxide, pro-collagen I (PICP), osteocalcin (OC), transforming growth factor-beta1 (TGFbeta-1) and interleukin-6 (IL-6) after 1.25(OH)2D3 stimulation. Under general anaesthesia, four sheep were submitted for bilateral tibial implantation of P558, SSt and Ti6Al4V rods. In vitro results demonstrated that the effect of P558 on osteoblast viability, PICP, TGF beta-1, tumor necrosis factor-alpha production did not significantly differ from that exerted by Ti6Al4V and controls. Furthermore, P558 enhanced osteoblast differentiation, as confirmed by ALP and OC levels, and reduced IL-6 production. At 26 weeks, the bone-to-implant contact was higher in P558 than in SSt (28%, p<0.005) and Ti6Al4V (4%, p<0.05), and was higher in Ti6Al4V than in SSt (22%, p<0.005). The tested materials did not affect bone microhardness in pre-existing host bone as evidenced by the measurements taken at 1000 microm from the bone-biomaterial interface (F=1.89, ns). At the bone-biomaterial interface the lowest HV value was found for SSt, whereas no differences in HV were observed between materials (F=1.55, ns). The current findings demonstrate P558 biocompatibility both in vitro and in vivo, and osteointegration processes are shown to be significantly improved by P558 as compared to the other materials tested.

Metal sensitivity in patients with orthopaedic implants

All metals in contact with biological systems undergo corrosion. This electrochemical process leads to the formation of metal ions, which may activate the immune system by forming complexes with endogenous proteins. Implant degradation products have been shown to be associated with dermatitis, urticaria, and vasculitis. If cutaneous signs of an allergic response appear after implantation of a metal device, metal sensitivity should be considered. Currently, there is no generally accepted test for the clinical determination of metal hypersensitivity to implanted devices. The prevalence of dermal sensitivity in patients with a joint replacement device, particularly those with a failed implant, is substantially higher than that in the general population. Until the roles of delayed hypersensitivity and humoral immune responses to metallic orthopaedic implants are more clearly defined, the risk to patients may be considered minimal. It is currently unclear whether metal sensitivity is a contributing factor to implant failure.

Cell-mediated immunity to the mycelial phase of Malassezia spp. in patients with pityriasis versicolor and controls

BACKGROUND

Malassezia is the aetiological agent of pityriasis versicolor. The mycelial phase of the organism predominates in lesions of pityriasis versicolor.

OBJECTIVES

To evaluate the cell-mediated immune (CMI) response to the mycelial phase of Malassezia in patients with this disease, which has not previously been studied.

METHODS

The CMI status of 12 patients with pityriasis versicolor and 12 age- and sex-matched controls to mycelial antigen(s) of the organism was examined. The responses to the mycelial form of three strains of the organism were assessed using lymphocyte transformation and leucocyte migration inhibition assays.

RESULTS

The transformation responses of the lymphocytes from both patients and controls gave transformation indices < or = 3, although the responses of lymphocytes from patients with pityriasis versicolor to the mycelial form of Malassezia strains were generally higher than those of the controls. In the leucocyte migration inhibition assay, leucocytes from patients with pityriasis versicolor and controls responded to the mycelial antigens of three different Malassezia strains; however, there was no significant difference in leucocyte response between patients with pityriasis versicolor and controls.

CONCLUSIONS

Patients with pityriasis versicolor do not therefore have a CMI deficiency to Malassezia mycelial antigens but fail to generate a protective CMI response to mycelial antigens over and above that of control individuals during active disease.