Elastin-derived protein coating onto poly(ethylene terephthalate). Technical, microstructural and biological studies

Elastin-Derived Peptides in the Central Nervous System: Friend or Foe

Elastin is one of the main structural matrix proteins of the arteries, lung, cartilage, elastic ligaments, brain vessels, and skin. These elastin fibers display incredible resilience and structural stability with long half-life. However, during some physiological and pathophysiological conditions, elastin is prone to proteolytic degradation and, due to the extremely low turnover rate, its degradation is practically an irreversible and irreparable phenomenon. As a result of elastin degradation, new peptides called elastin-derived peptides (EDPs) are formed. A growing body of evidence suggests that these peptides play an important role in the development of age-related vascular disease. They are also detected in the cerebrospinal fluid of healthy people, and their amount increases in patients after ischemic stroke. Recently, elastin-like polypeptides have been reported to induce overproduction of beta-amyloid in a model of Alzheimer's disease. Nevertheless, the role and mechanism of action of EDPs in the nervous system is largely unknown and limited to only a few studies. The article summarizes the current state of knowledge on the role of EDPs in the nervous system.

A Study of Combining Elastin in the Chitosan Electrospinning to Increase the Mechanical Strength and Bioactivity

While electrospun chitosan membranes modified to retain nanofibrous morphology have shown promise for use in guided bone regeneration applications in in vitro and in vivo studies, their mechanical tear strengths are lower than commercial collagen membranes. Elastin, a natural component of the extracellular matrix, is a protein with extensive elastic property. This work examined the incorporation of elastin into electrospun chitosan membranes to improve their mechanical tear strengths and to further mimic the native extracellular composition for guided bone regeneration (GBR) applications. In this work, hydrolyzed elastin (ES12, Elastin Products Company, USA) was added to a chitosan spinning solution from 0 to 4 wt% of chitosan. The chitosan-elastin (CE) membranes were examined for fiber morphology using SEM, hydrophobicity using water contact angle measurements, the mechanical tear strength under simulated surgical tacking, and compositions using Fourier-transform infrared spectroscopy (FTIR) and post-spinning protein extraction. In vitro experiments were conducted to evaluate the degradation in a lysozyme solution based on the mass loss and growth of fibroblastic cells. Chitosan membranes with elastin showed significantly thicker fiber diameters, lower water contact angles, up to 33% faster degradation rates, and up to seven times higher mechanical strengths than the chitosan membrane. The FTIR spectra showed stronger amide peaks at 1535 cm^-1 and 1655 cm^-1 in membranes with higher concentrated elastin, indicating the incorporation of elastin into electrospun fibers. The bicinchoninic acid (BCA) assay demonstrated an increase in protein concentration in proportion to the amount of elastin added to the CE membranes. In addition, all the CE membranes showed in vitro biocompatibility with the fibroblasts.

Elastin-Derived Peptide VGVAPG Affects Production and Secretion of Testosterone in Mouse Astrocyte In Vitro

Astrocytes play many distinct roles in the nervous system providing structural support for neurons and maintaining blood-brain barrier integrity. Steroid hormones exhibit a broad spectrum of actions in the central and peripheral nervous system, acting as trophic factors affecting cell differentiation and synaptic plasticity. In steroidogenesis, astrocytes play a key role by producing cholesterol, progesterone (P₄), testosterone (T), and estradiol (E₂). Currently there are only few studies which show that the Gly-Val-Ala-Pro-Gly (VGVAPG) peptide may affect the metabolism of astrocytes. Therefore, due to the role of neurosteroids, it is necessary to determine whether VGVAPG affects the level of E₂, P₄, and T in astrocytes. Primary mouse astrocytes were maintained in DMEM/F12 without phenol red, and supplemented with 10% charcoal/dextran-treated fetal bovine serum. Cells were exposed to 10 nM and 1 µM VGVAPG peptide and co-treated with cSrc kinase inhibitor I. After cell stimulation, we measured the Ki67 protein level and the production and secretion of P₄, T, and E₂. Our report presents the novel finding that the VGVAPG peptide affects the production and secretion of neurosteroids in astrocytes in vitro. The VGVAPG peptide increases the production of P₄; however, at the same time, it decreases the secretion of P₄ by astrocytes. On the other hand, it stimulates the production and secretion of T. Interestingly, the production of E₂ did not change in any studied time interval. The expression of Ki67 protein increased after 48 h of exposition to the VGVAPG peptide. The cSrc kinase inhibitor I prevented most of the effects of VGVAPG peptide. Therefore, we postulate that T and cSrc kinase may be responsible for increasing astrocyte proliferation.

Elastin-derived peptide VGVAPG affects the proliferation of mouse cortical astrocytes with the involvement of aryl hydrocarbon receptor (Ahr), peroxisome proliferator-activated receptor gamma (Pparγ), and elastin-binding protein (EBP)

During aging and ischemic and hemorrhagic stroke, elastin molecules are degraded and elastin-derived peptides are released into the brain microenvironment. Val-Gly-Val-Ala-Pro-Gly (VGVAPG) is a repeating hexapeptide in the elastin molecule. It is well documented that the peptide sequence binds with high affinity to elastin-binding protein (EBP) located on the cell surface, thereby transducing a molecular signal into the cell. The aim of our study was to investigate whether EBP, aryl hydrocarbon receptor (Ahr), and peroxisome proliferator-activated receptor gamma (Pparγ) are involved in VGVAPG-stimulated proliferation. Primary astrocytes were maintained in DMEM/F12 medium without phenol red, supplemented with 10 or 1% charcoal/dextran-treated fetal bovine serum (FBS). The cells were exposed to increasing concentrations of VGVAPG peptide, and resazurin reduction was measured. In addition, Glb1, Pparγ, and Ahr genes were silenced. After 48 h of exposure to 10 nM and 1 µM of VGVAPG peptide, the level of estradiol (E₂) and the expression of Ki67 and S100B proteins were measured. The results showed that at a wide range of concentrations, VGVAPG peptide increased the metabolism of astrocytes depending on the concentration of FBS. After silencing of Glb1, Pparγ, and Ahr genes, VGVAPG peptide did not affect the cell metabolism which suggests the involvement of all the mentioned receptors in its mechanism of action. Interestingly, in the low-FBS medium, the silencing of Glb1 gene did not result in complete inhibition of VGVAPG-stimulated proliferation. On the other hand, in the medium with 10% FBS VGVAPG increased Ki67 expression after Pparγ silencing, whereas in the medium with 1% FBS VGVAPG decreased Ki67 expression. Following the application of Ahr siRNA, VGVAPG peptide decreased the production of E₂ and increased the expression of Ki67 and S100B proteins.

Antiproliferative Effect of Elastin-Derived Peptide VGVAPG on SH-SY5Y Neuroblastoma Cells

Throughout the lifetime of humans, the amount of stem cells and the rate of cell proliferation continue to decrease. Reactive oxygen species (ROS) are one among the many factors that promote stem cell aging. Both a decrease in the level of stem cells and increase in ROS production can lead to the development of different neurodegenerative diseases. This study was conducted to determine how the VGVAPG peptide, liberated from elastin during the aging process and under pathological conditions, affects ROS production and activities of antioxidant enzymes in undifferentiated, proliferating SH-SY5Y cells. SH-SY5Y cells were maintained in Dulbecco's modified Eagle's medium/nutrient mixture F-12 supplemented with 10% heat-inactivated fetal bovine serum (FBS). After treating the SH-SY5Y cells with VGVAPG peptide, we measured ROS production; cell metabolism, proliferation, and expression; and activities of superoxide dismutase (SOD), glutathione peroxidase (GPx), and catalase (CAT). We demonstrated that the VGVAPG peptide increases GPx expression and activity, whereas it decreases CAT expression in SH-SY5Y cells. Silencing of the GLB1 gene prevents changes in GPx activity. Despite the fact that the VGVAPG peptide increases GPx expression, it increases the ROS level. Moreover, the VGVAPG peptide decreases SH-SY5Y proliferation, which is prevented by the ROS scavenger N-acetyl-L-cysteine. Our data suggest that ROS production and decreased proliferation of SH-SY5Y cells are the results of excitotoxicity meditated through close unrecognized molecular pathways. More research is needed to elucidate the unknown mechanism of action of VGVAPG peptide in the nervous system.

Sphingosine-1-phosphate improves endothelialization with reduction of thrombosis in recellularized human umbilical vein graft by inhibiting syndecan-1 shedding in vitro

Sphingosine-1-phosphate (S1P) has been known to promote endothelial cell (EC) proliferation and protect Syndecan-1 (SDC1) from shedding, thereby maintaining this antithrombotic signal. In the present study, we investigated the effect of S1P in the construction of a functional tissue-engineered blood vessel by using human endothelial cells and decellularized human umbilical vein (DHUV) scaffolds. Both human umbilical vein endothelial cells (HUVEC) and human cord blood derived endothelial progenitor cells (EPC) were seeded onto the scaffold with or without the S1P treatment. The efficacy of re-cellularization was determined by using the fluorescent marker CellTracker CMFDA and anti-CD31 immunostaining. The antithrombotic effect of S1P was examined by the anti-aggregation tests measuring platelet adherence and clotting time. Finally, we altered the expression of SDC1, a major glycocalyx protein on the endothelial cell surface, using MMP-7 digestion to explore its role using platelet adhesion tests in vitro. The result showed that S1P enhanced the attachment of HUVEC and EPC. Based on the anti-aggregation tests, S1P-treated HUVEC recellularized vessels when grafted showed reduced thrombus formation compared to controls. Our results also identified reduced SDC1 shedding from HUVEC responsible for inhibition of platelet adherence. However, no significant antithrombogenic effect of S1P was observed on EPC. In conclusion, S1P is an effective agent capable of decreasing thrombotic risk in engineered blood vessel grafts.

STATEMENT OF SIGNIFICANCE

Sphingosine-1phosphate (S1P) is a low molecular-weight phospholipid mediator that regulates diverse biological activities of endothelial cell, including survival, proliferation, cell barrier integrity, and also influences the development of the vascular system. Based on these characters, we the first time to use it as an additive during the process of a small caliber blood vessel construction by decellularized human umbilical vein and endothelial cell/endothelial progenitor. We further explored the function and mechanism of S1P in promoting revascularization and protection against thrombosis in this tissue engineered vascular grafts. The results showed that S1P could not only accelerate the generation but also reduce thrombus formation of small caliber blood vessel.

The Elastin Receptor Complex: A Unique Matricellular Receptor with High Anti-tumoral Potential

Elastin, one of the longest-lived proteins, confers elasticity to tissues with high mechanical constraints. During aging or pathophysiological conditions such as cancer progression, this insoluble polymer of tropoelastin undergoes an important degradation leading to the release of bioactive elastin-derived peptides (EDPs), named elastokines. EDP exhibit several biological functions able to drive tumor development by regulating cell proliferation, invasion, survival, angiogenesis, and matrix metalloproteinase expression in various tumor and stromal cells. Although, several receptors have been suggested to bind elastokines (α_vβ₃ and α_vβ₅ integrins, galectin-3), their main receptor remains the elastin receptor complex (ERC). This heterotrimer comprises a peripheral subunit, named elastin binding protein (EBP), associated to the protective protein/cathepsin A (PPCA). The latter is bound to a membrane-associated protein called Neuraminidase-1 (Neu-1). The pro-tumoral effects of elastokines have been linked to their binding onto EBP. Additionally, Neu-1 sialidase activity is essential for their signal transduction. Consistently, EDP-EBP interaction and Neu-1 activity emerge as original anti-tumoral targets. Interestingly, besides its direct involvement in cancer progression, the ERC also regulates diabetes outcome and thrombosis, an important risk factor for cancer development and a vascular process highly increased in patients suffering from cancer. In this review, we will describe ERC and elastokines involvement in cancer development suggesting that this unique receptor would be a promising therapeutic target. We will also discuss the pharmacological concepts aiming at blocking its pro-tumoral activities. Finally, its emerging role in cancer-associated complications and pathologies such as diabetes and thrombotic events will be also considered.

Medical Textiles as Vascular Implants and Their Success to Mimic Natural Arteries

Vascular implants belong to a specialised class of medical textiles. The basic purpose of a vascular implant (graft and stent) is to act as an artificial conduit or substitute for a diseased artery. However, the long-term healing function depends on its ability to mimic the mechanical and biological behaviour of the artery. This requires a thorough understanding of the structure and function of an artery, which can then be translated into a synthetic structure based on the capabilities of the manufacturing method utilised. Common textile manufacturing techniques, such as weaving, knitting, braiding, and electrospinning, are frequently used to design vascular implants for research and commercial purposes for the past decades. However, the ability to match attributes of a vascular substitute to those of a native artery still remains a challenge. The synthetic implants have been found to cause disturbance in biological, biomechanical, and hemodynamic parameters at the implant site, which has been widely attributed to their structural design. In this work, we reviewed the design aspect of textile vascular implants and compared them to the structure of a natural artery as a basis for assessing the level of success as an implant. The outcome of this work is expected to encourage future design strategies for developing improved long lasting vascular implants.

Elastin-coated biodegradable photopolymer scaffolds for tissue engineering applications

One of the main open issues in modern vascular surgery is the nonbiodegradability of implants used for stent interventions, which can lead to small caliber-related thrombosis and neointimal hyperplasia. Some new, resorbable polymeric materials have been proposed to substitute traditional stainless-steel stents, but so far they were affected by poor mechanical properties and low biocompatibility. In this respect, a new material, polypropylene fumarate (PPF), may be considered as a promising candidate to implement the development of next generation stents, due to its complete biodegradability, and excellent mechanical properties and the ease to be precisely patterned. Besides all these benefits, PPF has not been tested yet for vascular prosthesis, mainly because it proved to be almost inert, while the ability to elicit a specific biological function would be of paramount importance in such critical surgery applications. Here, we propose a biomimetic functionalization process, aimed at obtaining specific bioactivation and thus improved cell-polymer interaction. Porous PPF-based scaffolds produced by deep-UV photocuring were coated by elastin and the functionalized scaffolds were extensively characterized, revealing a stable bound between the protein and the polymer surface. Both 3T3 and HUVEC cell lines were used for in vitro tests displaying an enhancement of cells adhesion and proliferation on the functionalized scaffolds.

A novel scaffold geometry for chondral applications: theoretical model and in vivo validation

A theoretical model of the 3D scaffold internal architecture has been implemented with the aim to predict the effects of some geometrical parameters on total porosity, Young modulus, buckling resistance and permeability of the graft. This model has been adopted to produce porous poly-caprolacton based grafts for chondral tissue engineering applications, best tuning mechanical and functional features of the scaffolds. Material prototypes were produced with an internal geometry with parallel oriented cylindrical pores of 200 μm of radius (r) and an interpore distance/pores radius (d/r) ratio of 1. The scaffolds have been then extensively characterized; progenitor cells were then used to test their capability to support cartilaginous matrix deposition in an ectopic model. Scaffold prototypes fulfill both the chemical-physical requirements, in terms of Young's modulus and permeability, and the functional needs, such as surface area per volume and total porosity, for an enhanced cellular colonization and matrix deposition. Moreover, the grafts showed interesting chondrogenic potential in vivo, besides offering adequate mechanical performances in vitro, thus becoming a promising candidate for chondral tissues repair. Finally, a very good agreement was found between the prediction of the theoretical model and the experimental data. Many assumption of this theoretical model, hereby applied to cartilage, may be transposed to other tissue engineering applications, such as bone substitutes.

Elastomeric Recombinant Protein-based Biomaterials

Elastomeric protein-based biomaterials, produced from elastin derivatives, are widely investigated as promising tissue engineering scaffolds due to their remarkable properties including substantial extensibility, long-term stability, self-assembly, high resilience upon stretching, low energy loss, and excellent biological activity. These elastomers are processed from different sources of soluble elastin such as animal-derived soluble elastin, recombinant human tropoelastin, and elastin-like polypeptides into various forms including three dimensional (3D) porous hydrogels, elastomeric films, and fibrous electrospun scaffolds. Elastin-based biomaterials have shown great potential for the engineering of elastic tissues such as skin, lung and vasculature. In this review, the synthesis and properties of various elastin-based elastomers with their applications in tissue engineering are described.

Recombinant elastin-mimetic biomaterials: Emerging applications in medicine

Biomaterials derived from protein-based block copolymers are increasingly investigated for potential application in medicine. In particular, recombinant elastin block copolymers provide significant opportunities to modulate material microstructure and can be processed in various forms, including particles, films, gels, and fiber networks. As a consequence, biological and mechanical responses of elastin-based biomaterials are tunable through precise control of block size and amino acid sequence. In this review, the synthesis of a set of elastin-mimetic triblock copolymers and their diverse processing methods for generating material platforms currently applied in medicine will be discussed.

Elastin-based materials

Elastin is a versatile elastic protein that dominates flexible tissues capable of recoil, and facilitates commensurate cell interactions in these tissues in all higher vertebrates. Elastin's persistence and insolubility hampered early efforts to construct versatile biomaterials. Subsequently the field has progressed substantially through the adapted use of solubilized elastin, elastin-based peptides and the increasing availability of recombinant forms of the natural soluble elastin precursor, tropoelastin. These interactions allow for the formation of a sophisticated range of biomaterial constructs and composites that benefit from elastin's physical properties of innate assembly and elasticity, and cell interactive properties as discussed in this tutorial review.

Extruded collagen-polyethylene glycol fibers for tissue engineering applications

The repair of anterior cruciate ligament, skin, tendon and cartilage remains a challenging clinical problem. Extruded collagen fibers comprise a promising scaffold for tissue engineering applications; however the engineering of these fibers has still to be improved to bring this material to clinical practice. Herein we investigate the influence of collagen concentration, the amount of PEG Mw 8K and the extrusion tube internal diameter on the properties of these fibers. Ultrastructural evaluation revealed packed intra-fibrillar structure. The thermal properties were found to be independent of the collagen concentration, the amount of PEG or the extrusion tube internal diameter (p > 0.05). An inversely proportional relationship between dry fiber diameter and stress at break was found. The 20% PEG was identified as the optimal amount required for the production of reproducible fibers. Increasing the collagen concentration resulted in fibers with higher diameter (p < 0.001), force (p < 0.001) and strain at break (p < 0.02) values, whilst the stress at break (p < 0.001) and the modulus (p < 0.007) values were decreased. Increasing the extrusion tube internal diameter influence significantly (p < 0.001) all the investigated mechanical properties. Overall, extruded collagen fibers were produced with properties similar to those of native or synthetic fibers to suit a wide range of tissue engineering applications.

The effect of a recombinant elastin-mimetic coating of an ePTFE prosthesis on acute thrombogenicity in a baboon arteriovenous shunt

A recombinant elastin-mimetic triblock protein polymer with an inverse transition temperature (approximately 20 degrees C) was used to impregnate small-diameter (4 mm i.d.) expanded polytetrafluoroethylene (ePTFE) vascular grafts. Scanning electron microscopy confirmed that initial elastin impregnation of the graft followed by further multilayer coating with elastin films filled in the fibril and node structure of the luminal surface of the ePTFE graft and was macroscopically smooth. Elastin protein polymer impregnation reduced the advancing contact angle of the luminal surface to 43 degrees, which was comparable to the advancing contact angle of 47 degrees for a cast elastin film. Attenuated total reflection infrared spectroscopy and Coomassie blue staining revealed little discernable change in the protein surface film after 24 h of shear at 500 s(-1) and 37 degrees C. Excellent short-term blood-contacting properties as determined by minimal fibrin and platelet deposition were demonstrated using a baboon extracorporeal femoral arteriovenous shunt model. The results of this study demonstrate the applicability of an elastin-mimetic triblock protein polymer as a non-thrombogenic coating or as a component of a tissue-engineered composite.

Elastin

Elastin is a key extracellular matrix protein that is critical to the elasticity and resilience of many vertebrate tissues including large arteries, lung, ligament, tendon, skin, and elastic cartilage. Tropoelastin associates with multiple tropoelastin molecules during the major phase of elastogenesis through coacervation, where this process is directed by the precise patterning of mostly alternating hydrophobic and hydrophilic sequences that dictate intermolecular alignment. Massively crosslinked arrays of tropoelastin (typically in association with microfibrils) contribute to tissue structural integrity and biomechanics through persistent flexibility, allowing for repeated stretch and relaxation cycles that critically depend on hydrated environments. Elastin sequences interact with multiple proteins found in or colocalized with microfibrils, and bind to elastogenic cell surface receptors. Knowledge of the major stages in elastin assembly has facilitated the construction of in vitro models of elastogenesis, leading to the identification of precise molecular regions that are critical to elastin-based protein interactions.

Investigation of recombinant human elastin polypeptides as non-thrombogenic coatings

We investigated the use of a recombinant human elastin polypeptide as a coating on synthetic materials with a view to determining if these polypeptides could improve the blood compatibility of cardiovascular devices such as vascular conduits and arterial/venous catheters. Platelet adhesion and activation were studied in vitro using three commercially available synthetic materials: polyethylene terephthalate (Mylar), a poly(tetrafluoroethylene/ethylene) copolymer (Tefzel) and a polycarbonate polyurethane (Corethane). Coated with adsorbed polypeptide, all three synthetic materials demonstrated reduced platelet activation and adhesion in platelet rich plasma in vitro. Compared to non-coated controls, there was a significant decrease (p=0.05) in both platelet microparticle release and P-selectin expression for the polypeptide-coated surfaces. Scanning electron microscopy indicated fewer adhering platelets on coated surfaces compared to non-coated controls. In vivo, in a rabbit model, evaluations of polyurethane catheters coated with the polypeptide showed a marked increase in catheter patency and a significant decrease in fibrin accretion and embolism when compared to uncoated controls. This polypeptide shows a strong potential for use as a non-thrombogenic coating for small diameter vascular grafts. In addition, the results of this study indicate that the elastin polypeptide would be a valuable component of a tissue engineered vascular conduit.

Functionalization of poly-L-lactic-co-ε-caprolactone: effects of surface modification on endothelial cell proliferation and hemocompatibility

A copolymer of L-lactic acid and epsilon-caprolactone (PLLACL) was synthesized with the aim of preparing a bioartificial, small-diameter and partially resorbable vascular graft. The material was submitted to surface functionalizations (i.e. chemical modification by means of hydrolytic 'etching' and plasma discharge) to promote endothelial cell (EC) adhesion and growth avoiding platelet adhesion or coagulation factor absorption. Furthermore, the behaviour of human microvascular endothelial cells (HMVEC) seeded on the untreated and treated copolymer is described, as well as the platelet adhesion and the modifications of coagulation factors determined by the copolymer itself. PLLACL in its native state provided little support for EC adhesion. Improved EC adherence was obtained when functional groups were provided on the polymer surface by surface chemical hydrolysis. HMVEC seeded and cultured on the polymer surface did not show any ultrastructural alteration, thus demonstrating the absence of the polymer cytotoxicity. Moreover, SEM analysis performed on cold plasma modified specimens showed the presence of a subconfluent monolayer of EC, with an elongated spread morphology. Both the untreated and treated copolymers induced only slight variations of platelet number, but determined the activated partial thromboplastin time (APTT) increase, due to factor XI reduction. Finally, a prototype of partially biodegradable vascular prosthesis was prepared with NaOH/HCl-treated copolymer. Pre-cultured HMVEC seeding of the prosthesis by means of a rotation device resulted in an almost completely coverage of the graft inner surface.