15 Separation of antibodies by liquid chromatography

Proteinous Polymeric Shell Decorated Nanocrystals for the Recognition of Immunoglobulin M

This study demonstrates the preparation of photosensitively orientated and crosslinked proteinous polymeric shell having quantum dot based nanocrystals through Amino acid Decorated and Light Underpinning Conjugation Approach (ANADOLUCA). ANADOLUCA is based on photo-electron transfer method and uses these decorated nanocrystals for specifically and effectively recognition and detection of Immunoglobulin M in the aqueous environment. The conjugation method effectively provides an orientation of affinity pairs on the surface of quantum dots nanocrystals. This photosensitive ruthenium-based amino acid monomer is a synthetic and inexpensive material for the preparation of bioconjugates. The nanocrystals give advantages for using a wide pH and temperature range. The construction and preparation method is applicable to silica materials, superparamagnetic particles, quantum dots, carbon nanotubes, Ag/Au nanoparticles, Au surfaces, and polymeric materials. This prepared proteinous polymeric shell decorated nanocrystals are of great potential in applications in life sciences and can be used in infection case studies or allergy symptoms.

Mechanistic modeling based process analytical technology implementation for pooling in hydrophobic interaction chromatography

A major challenge in chromatography purification of therapeutic proteins is batch-to-batch variability with respect to impurity levels and product concentration in the feed. Mechanistic model can enable process analytical technology (PAT) implementation by predicting impact of such variations and thereby improving the robustness of the resulting process and controls. This article presents one such application of mechanistic model of hydrophobic interaction chromatography (HIC) as a PAT tool for making robust pooling decisions to enable clearance of aggregates for a monoclonal antibody (mAb) therapeutic. Model predictions were performed before the actual chromatography experiments to facilitate feedforward control. The approach has been successfully demonstrated for four different feeds with varying aggregate levels (3.84%-5.54%) and feed concentration (0.6 mg/mL-1 mg/mL). The resulting pool consistently yielded a product with 1.32 ± 0.03% aggregate vs. a target of 1.5%. A comparison of the traditional approach involving column fractionation with the proposed approach indicates that the proposed approach results in achievement of satisfactory product purity (98.68 ± 0.03% for mechanistic model based PAT controlled pooling vs. 98.64 ± 0.16% for offline column fractionation based pooling). © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 35: e2758, 2019.

Design of experiments applications in bioprocessing: Chromatography process development using split design of experiments

Development of a chromatographic step in a time and resource efficient manner remains a serious bottleneck in protein purification. Chromatographic performance typically depends on raw material attributes, feed material attributes, process factors, and their interactions. Design of experiments (DOE) based process development is often chosen for this purpose. A challenge is, however, in performing a DOE with such a large number of process factors. A split DOE approach based on process knowledge in order to reduce the number of experiments is proposed. The first DOE targets optimizing factors that are likely to significantly impact the process and their effect on process performance is unknown. The second DOE aims to fine-tune another set of interacting process factors, impact of whom on process performance is known from process understanding. Furthermore, modeling of a large set of output response variables has been achieved by fitting the output responses to an empirical equation and then using the parametric constants of the equation as output response variables for regression modeling. Two case studies involving hydrophobic interaction chromatography for removal of aggregates and cation exchange chromatography for separation of charge variants and aggregates have been utilized to illustrate the proposed approach. Proposed methodology reduced total number of experiments by 25% and 72% compared to a single DOE based on central composite design and full factorial design, respectively. The proposed approach is likely to result in a significant reduction in resources required as well as time taken during process development. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 35: e2730, 2019.

Size-Exclusion Chromatography for the Analysis of Protein Biotherapeutics and their Aggregates

In recent years, the use and number of biotherapeutics has increased significantly. For these largely protein-based therapies, the quantitation of aggregates is of particular concern given their potential effect on efficacy and immunogenicity. This need has renewed interest in size-exclusion chromatography (SEC). In the following review we will outline the history and background of SEC for the analysis of proteins. We will also discuss the instrumentation for these analyses, including the use of different types of detectors. Method development for protein analysis by SEC will also be outlined, including the effect of mobile phase and column parameters (column length, pore size). We will also review some of the applications of this mode of separation that are of particular importance to protein biopharmaceutical development and highlight some considerations in their implementation.

Identification and deletion of the major secreted protein of Pichia pastoris

A major contaminating host cell protein was identified in fed batch cultures of Pichia pastoris producing an antibody Fab fragment. Purification and peptide sequencing identified this protein to be related to the cysteine-rich secretory protein family. The same protein was also observed as one of the most abundantly secreted proteins in chemostat cultures of a wild type P. pastoris strain. It has an apparent molecular weight of 65 kDa, 2-fold higher than predicted from the amino acid sequence, which is due to high O-glycosylation. It was denominated extracellular protein X 1 (Epx1), as no clear function could be attributed to it. The EPX1 gene is upregulated in different stress situations, and the respective deletion strain was more susceptible than the wild type to the cell wall damaging agents Calcofluor white and Congo red. The EPX1 deletion strain (Δepx1) was evaluated for its suitability for recombinant protein production. No significant difference in growth and product formation was observed between the wild type and the Δepx1 strain. Batch purification of a Fab fragment produced in the Δepx1 strain highlighted its superior purity due to the decreased host cell protein load.

A new approach for the removal of protein impurities from purified biologicals using combinatorial solid-phase ligand libraries

The removal of last impurity traces from a purified protein is generally called polishing. It is an important step in downstream processing since protein impurities may generate undesirable side effects when the preparation is intended for research, diagnostic and more importantly therapeutic applications. Polishing is generally achieved by using orthogonal separation methods to previous steps, the most common being gel permeation chromatography. In spite of its polishing effectiveness, this technique suffers from a poor separation capacity and modest productivity as a result of low speed. Other approaches, for instance, based on anion exchange or on hydrophobic chromatography, that may be optimized for a given process cannot be used as generic methods. This document reports for the first time the use of a combinatorial solid-phase peptide library as a general method for the removal of impurity traces. Several examples of impurity trace removal are reported; starting material is either a pure protein spiked with serum proteins or with Escherichia coli extracts or current purified proteins still containing a small percentage of impurities. Among polished proteins are recombinant human albumin expressed in Pichia pastoris and human transferrin purified from whole plasma. This new method is used in neutral or even physiological pH and ionic strength conditions, with a remarkable capability to remove impurities. The process is as rapid as current adsorption chromatography procedures usable for the removal of a large number of protein impurities, with each one present in small amounts, such as host cell proteins.

Prefractionation techniques in proteome analysis: the mining tools of the third millennium

The present review deals with prefractionation protocols used in proteomic investigation in preparation for mass spectrometry (MS) or two-dimensional electrophoresis (2-DE) map analysis. Briefly, reported methods focus on cell organelle differential centrifugation and on chromatographic approaches, to continue in extenso with a panoply of electrophoretic methods. In the case of chromatography, procedures useful as a prefractionation step, including affinity, ion-exchange, and reversed-phase resins, revealed several hundreds of new species, previously undetected in unfractionated samples. Novel chromatographic prefractionation methods are also discussed such as a multistaged fractionation column, consisting in a set of immobilized chemistries, serially connected in a stack format (an assembly of seven blocks), each capable of harvesting a given protein population. Such a method significantly simplifies the complexity of treated samples while concentrating species, all resulting in a larger number of visible proteins by MS or 2-DE. Electrophoretic prefractionation protocols include all those electrokinetic methodologies which are performed in free solution, essentially all relying on isoelectric focusing steps (although some approaches based on gels and granulated media are also discussed). Devices associated with electrophoretic separation are multichamber apparatus, such as the multicompartment electrolyzers equipped with either isoelectric membranes or with isoelectric beads. Multicup device electrophoresis and several others, exploiting the conventional technique of carrier ampholyte focusing, are reviewed. This review also reports approaches for sample treatments in order to detect low-abundance species. Among others, a special emphasis is made on the reduction of concentration difference between proteins constituting a sample. This latter consists in a library of combinatorial ligands coupled to small beads. Such a library comprises hexameric ligands composed of 20 amino acids, resulting in millions of different structures. When these beads are impregnated with complex proteomes (e.g., human sera) of widely differing protein compositions, they are able to significantly reduce the concentration differences, thus greatly enhancing the possibility to evidence low-abundance species. It is felt that this panoply of methods could offer a strong step forward in "mining below the tip of the iceberg" for detecting the "unseen proteome".

A dual-mode approach to the selective separation of antibodies and their fragments

A novel chromatography method for the separation of antibodies is described. The adsorption of antibodies on the solid phase involves interaction with a ligand that combines mild hydrophobic characteristics and some degree of molecular recognition with a derivative of pyridine. This combined effect results in the adsorption of antibodies in the absence of lyotropic salts. When environmental pH is changed, the ligand becomes ionically charged, allowing the desorption of antibodies. The mechanism of adsorption, involving hydrophobic associations and ionic related interaction, is here qualified as dual-mode. Studies on the determination of the apparent dissociation constant for immunoglobulins G are presented. Adsorption of antibodies from crude feedstocks typically occurs without adjustment of pH or ionic strength. The sorbent is then washed with a buffer to eliminate protein impurities and, when lowering the environmental pH, antibodies are desorbed. The solid-phase material is used for the separation of antibodies from an ascites fluid and from a cell culture supernatant, followed by a polishing step on an hydroxyapatite column. Preliminary studies, related to the ability of the solid phase to separate antibody fragments, are also reported. In these studies, it has been demonstrated that both Fab and Fc fragments from polyclonal IgG are adsorbed to the solid phase under typical binding conditions. Under other defined physico-chemical conditions (ionic strength and pH), separation of both fragments in a single step has been achieved.