Denitrification with acrylonitrile as a substrate using pure bacteria cultures isolated from acrylonitrile-butadiene-styrene wastewater

Isolation of the Acrylamide Denitrifying Bacteria from a Wastewater Treatment System Manufactured with Polyacrylonitrile Fiber

Acrylamide has carcinogenicity and toxicity, so its discharge to natural water and soil systems might have an adverse impact on water quality, endangering public health and welfare. The investigation attempts to isolate acrylamide denitrifying bacteria from a wastewater treatment system manufactured with polyacrylonitrile (PAN) fiber. The goal is to elucidate the effectiveness of isolated pure strain and PAN mixed strains in treating acrylamide from synthetic wastewater. The results reveal that Ralstonia eutropha TDM-3 was isolated from the wastewater treatment system manufactured with PAN fiber. The PAN mixed strains and R. eutropha TDM-3 can consume up to 1446 mg/L acrylamide to denitrify from synthetic wastewater. Complete acrylamide removal depended on the supply of sufficient electron acceptors (nitrate). Strain R. eutropha TDM-3, Azoarcus sp. pF6, Azoarcus sp. T, and Herbaspirillum sp. G8A1 are related closely, according to the phylogenetic analyses of 16S rDNA sequences.

Eubacterial diversity of activated biomass from a common effluent treatment plant

A common effluent treatment plant (CETP) is a biological wastewater treatment facility that receives wastewater from different industries. The activated biomass in the CETP survives on a wide range of chemicals with no fixed wastewater characteristics. We carried out a diversity analysis of this activated biomass using culture as well as culture-independent techniques. Using culture-based techniques, strains belonging to 26 different genera from the phyla Proteobacteria, Actinobacteria and Firmicutes were isolated. The gamma-proteobacteria was the best represented class, with 36.5% of the isolates. Bacterial diversity was also analyzed culture-independently by means of sequence determination of cloned 16S rRNA genes. Twenty-one different genera from the phyla Proteobacteria, Firmicutes, Planctomycetes and Bacteroidetes were identified. The total diversity of the activated biomass was composed of members of five known phyla, represented by 37 genera, with the Proteobacteria constituting the most abundant phylum detected. However, a very large fraction of the diversity represented a hitherto unidentified bacterial population. More than half (50.2%) of the 16S rDNA clones represented unidentified non-culturable bacteria, underlining the vast untapped diversity of CETP communities. Our results also indicate that both culture-based and culture-independent techniques should be combined to cover the microbial diversity of complex ecosystems.

Stability in a denitrifying fluidized bed reactor

This study evaluates changes in the microbial community structure and function of a pilot-scale denitrifying fluidized bed reactor during periods of constant operating conditions and periods of perturbation. The perturbations consisted of a shutdown period without feed, two disturbances in which biofilms were mechanically sheared from carrier particles, and a twofold step increase in feed nitrate concentration. In the absence of perturbations, nitrate removal was stable and consistently greater than 99%. The structure and dynamics of the microbial community were studied using cloning and sequencing techniques and terminal restriction fragment length polymorphism (T-RFLP) of the SSU rRNA gene. Under unperturbed operating conditions, stable function was accompanied by high constancy and low variability of community structure with the majority of terminal restriction fragments (T-RFs) appearing throughout operation at consistent relative abundances. Several of the consistently present T-RFs correlated with clone sequences closely related to Acidovorax (98% similarity), Dechloromonas (99% similarity), and Zoogloea (98% similarity), genera recently identified by molecular analyses of similar systems. Significant changes in community structure and function were not observed after the shutdown period. In contrast, following the increase in loading rate and the mechanical disturbances, new T-RFs appeared. After both mechanical disturbances, function and community structure recovered. However, function was much more resilient than community structure. The similarity of response to the mechanical disturbances despite differences in community structure and operating conditions suggests that flexible community structure and potentially the activity of minor members under nonperturbation conditions promotes system recovery.

Microbial diversity in biofilms from corroding heating systems

Culture-independent investigations of the bacterial diversity and activity in district heating systems with and without corrosion did not make it possible to relate one group of microorganisms with the observed corrosion. Fluorescence in situ hybridization by oligonucleotide probes revealed the dominance of beta-proteobacteria, sulphate reducing prokaryotes and alpha-proteobacteria. Analysis of a clone library from one Danish heating (DH) system showed that the most sequences formed two clusters within the alpha-proteobacteria affiliated to the families Rhizobiaceae and Acetobacteraceae and two clusters within the beta-proteobacteria belonging to the family Comamonadaceae. Functional groups were determined by microautoradiography showing aerobic and anaerobic bacteria (sulphate reducing and methanogenic bacteria). The corrosion study showed that pitting corrosion rates were five to ten times higher than the general corrosion rates, suggesting the presence of biocorrosion. The results indicate that several bacterial groups could be involved in corrosion of DH system piping including sulphate reducing prokaryotes, Acidovorax (within the beta-proteobacteria), methanogenic bacteria and others.