DNA sequencing by capillary array electrophoresis with an electric field strength gradient

Theoretical investigation on the performance of DNA electrophoresis under programmed step electric field strength: Two-step condition

Programmed step electric field strength is a simple-to-use technique that has already been reported to be effective to enhance the efficiency or speed of DNA electrophoresis. However, a global understanding and the details of this technique are still vague. In this paper, we investigated the influence of programmed step electric field strength by theoretical calculation and concentrated on a basic format named as two-step electric field strength. Both subtypes of two-step electric field strength conditions were considered. The important parameters, such as peak spacing, peak width, resolution, and migration time, were calculated in theory to understand the performance of DNA electrophoresis under programmed step electric field strength. The influence of two-step electric field strength on DNA electrophoresis was clearly revealed on a diagram of resolution versus migration time. Both resolution and speed of DNA electrophoresis under two-step electric field strength conditions are simply expressed by the shape of curves in the diagram. The possible shapes of curve were explored by calculation and shown in this paper. The subtype II of two-step electric field strength brings drastic variation on the resolution. Its limitations of enhancement and deterioration of resolution were predicted in theory.

Electrophoretic behavior of plasmid DNA in the presence of various intercalating dyes

In the present study, the electrophoretic behavior of linear, supercoiled and nicked circular plasmid DNA in the presence of various intercalating dyes was characterized using pGL3 plasmid DNA as a model. The enzymatic digestion of pGL3 plasmid DNA with HindIIIwas monitored by capillary electrophoresis coupled with laser-induced fluorescence detection (CE-LIF). Nicked circular plasmid DNA was found to be relatively sensitive to enzymes, and was almost digested into the linear conformer after 10-min incubation, indicating that nicked circular plasmid DNA has little chance of targeting and entering the cell nucleus. Partly digested plasmid DNA containing only linear and supercoiled conformers can be used as a standard to confirm the migration order of plasmid DNA. In methylcellulose (MC) solution with YO-PRO-1 or YOYO-1, linear plasmid DNA eluted first, followed by supercoiled and nicked plasmid DNA, and nicked plasmid DNA eluted as a broad peak. With SYBR Green 1, nicked plasmid DNA eluted first as three sharp peaks, followed by linear and supercoiled plasmid DNA. The nuclear plasmid DNA from two transfected cell lines was successfully analyzed using the present procedure. Similar results were obtained with an analysis time of seconds using microchip electrophoresis with laser-induced fluorescence detection (mu-CE-LIF). To our knowledge, these results represent the first reported analysis of nuclear plasmid DNA from transfection cells by CE-LIF or mu-CE-LIF without pre-preparation, suggesting that the present procedure is a promising alternative method for evaluating transfection efficiency of DNA delivery systems.

Screening of mixed poly(ethylene oxide) solutions for microchip separation of double-stranded DNA using an orthogonal design approach

We describe a quick and systematic optimization of molecular weights (MWs) and concentrations of a series of mixed poly(ethylene oxide) (PEO) matrices for separating specific double-stranded DNA fragments on polymethylmethacrylate-based microchips by using an orthogonal design (ORD) approach. The mixed matrices are composed of PEOs in four MW ranges (M(w) 8 x 10(6), 1 x 10(6), 4 x 10(5), and 1 x 10(5)) with varying concentration ratios. In the mixed solutions, PEO with an intermediate MW of 4 x 10(5) is found to be a dominant factor for separating small DNA fragment pairs (e.g., 82 and 88 bp), while PEO with a high MW of 8 x 10(6) plays an important role in separating intermediate and large fragments (e.g., 271 and 281 bp, 506 and 517 bp, 7 and 10 kbp). High-concentration PEO mixtures give better resolution for short fragments, while dilute PEO mixtures show better resolution for long fragments. The optimized matrices are suitable for high-resolution separation of multiplex polymerase chain reaction-amplified products and restriction digest fragments ranging in size from 20 bp to 40 kbp within 4 min at a constant field strength of 177 V/cm. The experimental results indicate the robustness and speediness of the ORD to screen the contribution of PEO MWs and to tune optimally the PEO concentration ratio of different MWs with reference to the performance of specific DNA fragments separated.

Fluorometric Determination of Sulfite and Nitrite in Aqueous Samples Using a Novel Detection Unit of a Microfluidic Device

On-chip fluorescence determination of sulfite and nitrite with N-(9-acridinyl)maleimide (NAM) and 2,3-diaminonaphthalene (DAN) has been developed using a novel fluorescence detection unit for microchip analysis. Usually, these fluorescence reagents are derivatized and detected separately in microchip analysis because different fluorescence wavelengths are emitted. The proposed fluorescence detection unit has optical fibers with no optical filter, and plural wavelengths of fluorescence were detected sensitively, even in the microchip. In this study, the simultaneous determination of sulfite and nitrite in environmental samples was performed with a polymer microchip analysis system. The calibration curves of sulfite and nitrite showed linear relations (R2 = 0.998 (sulfite) and R2 = 0.990 (nitrite)), and the relative standard deviations (RSD) for 4 runs were 2.1% (20 microM sulfite) and 1.3% (20 microM nitrite), respectively. The proposed method was applied to the recovery test of sulfite and nitrite in environmental samples.

The impact of a plug of salts on the analysis of large volumes of dsDNA by capillary electrophoresis

A partially filling technique for the analysis of DNA markers and polymerase chain reaction (PCR) products by capillary electrophoresis in the presence of electroosmotic flow using polymer solutions is presented. Either after or prior to the sample injection, a plug of salts at high pH was hydrodynamically injected. During the separation, poly(ethylene oxide) (PEO) solution entered the capillary. We have found that the position, length, and composition of the plugs affect the sensitivity, resolution, and speed on the analysis of PhiX-174/HaeIII DNA restriction fragments or a DNA mixture (pBR 322/HaeIII digest, pBR 328/BglI digest and pBR 328/HinfI digest) with different degrees. Through careful evaluation of the impact of anions and cations on the analysis of DNA, we have suggested that the optimal condition is applying a plug consisting of 32 mM NaCl and 0.01 M NaOH at 30 cm height for 60 s after sample injection. In the presence of such a plug, PEO adsorption reduces, and thus the separation is faster, as well as the sensitivity improves. Using this condition, the analysis of a DNA mixture (injected at 30 cm for 360 s) containing ten different PCR products amplified after 17 cycles was complete in 25 min. About a 2000-fold improvement in the sensitivity was achieved when compared to that by a conventional method (10 s injection) without applying a plug.

Recent advances in DNA sequencing by capillary and microdevice electrophoresis

A number of significant improvements in the electrophoretic performance and design of DNA sequencing devices have culminated in the introduction of truly industrial grade production scale instruments. These instruments have been the workhorses behind the massive increase in genomic sequencing data available in public and private databases. We highlight the recent progress in aspects of capillary electrophoresis (CE) that has enabled these achievements. In addition, we summarize recent developments in the use of microfabricated devices for DNA sequencing that promise to bring the next leap in productivity.

Shotgun optical maps of the whole Escherichia coli O157:H7 genome

We have constructed NheI and XhoI optical maps of Escherichia coli O157:H7 solely from genomic DNA molecules to provide a uniquely valuable scaffold for contig closure and sequence validation. E. coli O157:H7 is a common pathogen found in contaminated food and water. Our approach obviated the need for the analysis of clones, PCR products, and hybridizations, because maps were constructed from ensembles of single DNA molecules. Shotgun sequencing of bacterial genomes remains labor-intensive, despite advances in sequencing technology. This is partly due to manual intervention required during the last stages of finishing. The applicability of optical mapping to this problem was enhanced by advances in machine vision techniques that improved mapping throughput and created a path to full automation of mapping. Comparisons were made between maps and sequence data that characterized sequence gaps and guided nascent assemblies.

Enhanced throughput for DNA sequencing by capillary array electrophoresis with a gradient of electric field strength

The effect of electric field gradients are examined on the speed, selectivity, read length, and accuracy for DNA sequencing using capillary array electrophoresis. Modified electric field gradients was realized to read over 800 bases within 140 min. The method developed is effectively applicable to single nucleotide polymorphism analysis for genomic drug discovery and pharmacogenomics.

Current awareness

In order to keep subscribers up-to-date with the latest developments in their field, this current awareness service is provided by John Wiley & Sons and contains newly-published material on comparative and functional genomics. Each bibliography is divided into 16 sections. 1 Reviews & symposia; 2 General; 3 Large-scale sequencing and mapping; 4 Genome evolution; 5 Comparative genomics; 6 Gene families and regulons; 7 Pharmacogenomics; 8 Large-scale mutagenesis programmes; 9 Functional complementation; 10 Transcriptomics; 11 Proteomics; 12 Protein structural genomics; 13 Metabolomics; 14 Genomic approaches to development; 15 Technological advances; 16 Bioinformatics. Within each section, articles are listed in alphabetical order with respect to author. If, in the preceding period, no publications are located relevant to any one of these headings, that section will be omitted