Sustained release of human growth hormone (hGH) from collagen film and evaluation of effect on wound healing in db/db mice

Study of glutaraldehyde-treated crosslinking protocols for placental decellularized matrix sponges

Extracellular matrix sponge plays a positive role in the wound healing process, but requires proper structural strength and biological properties. In order to solve the problem of lyophilized dissolution of placenta-derived sponge, glutaraldehyde was selected for use in the lyophilized crosslinking process to improve the necessary mechanical properties of the placental decellularization matrix sponge. In this work, the effects of three cross-linking methods of glutaraldehyde (Fumigation/Slurry/Soak) on the physical and biological characteristics of lyophilised sponges derived from placental acellular matrix was investigated. The results revealed that the sponges prepared by all three cross-linking methods exhibited excellent blood coagulation ability and stability. The fumigation cross-linked sponges had good mechanical properties of soft and elastic, and safe cytotoxicity, which were more compatible with the requirements of wound dressing. The slurry cross-linking process was uneven due to the stacked matrix materials, resulting in obvious cracks and easy to break when stretching. The soak crosslinking can obtain a higher degree of crosslinking, which leads to the poor antibacterial performance and the harder sponge scaffold with larger elastic modulus and smaller tensile ratio. In general, fumigation cross-linking is more suitable for the preparation of acellular sponge derived from placenta materials which can maintain basic mechanical properties and biological validity.

Preparation of recombinant type I collagen (PF-I-80) and its functional characterization and biomedical applications in wound healing

This study evaluates the potential applications of recombinant PF-I-80 protein in regenerative medicine and the treatment of inflammatory diseases, focusing on its effects on cell migration, differentiation, and anti-inflammatory properties. Various in vitro assays were conducted, including scratch assays, Transwell experiments, RT-PCR and Western Blot to analyze gene and protein expression related to differentiation and inflammation, and immunofluorescence staining to observe cellular changes. The results indicated that PF-I-80 significantly promoted cell migration, highlighting its potential in tissue repair and regeneration. It also enhanced cell differentiation, demonstrating its applicability in tissue repair, and showed significant anti-inflammatory effects by reducing the expression of pro-inflammatory cytokines. In animal models, PF-I-80 notably reduced levels of inflammatory factors IL-1β and TNF-α, shortened the inflammatory phase, and accelerated wound healing. Additionally, PF-I-80 increased FGF-2 levels, which promoted the proliferation of endothelial and fibroblast cells and enhanced collagen synthesis. These in vitro and in vivo findings position PF-I-80 as a promising biomaterial for applications in regenerative medicine and inflammatory disease treatment.

Development of nano-liposomal human growth hormone as a topical formulation for preventing uvb-induced skin damage

Due to its involvement in skin maintenance and repair, topical administration of recombinant human growth hormone (rhGH) is an interesting strategy for therapeutic purposes. We have formulated and characterized a topical rhGH-loaded liposomal formulation (rhGH-Lip) and evaluated its safety, biological activity, and preventive role against UVB-induced skin damage. The rhGH-Lip had an average size and zeta potential of 63 nm and -33 mV, respectively, with 70 % encapsulation efficiency. The formulation was stable at 4 °C for at least one year. The SDS-PAGE and circular dichroism results showed no structural alterations in rhGH upon encapsulation. In vitro, studies in HaCaT, HFFF-2, and Ba/F3-rhGHR cell lines confirmed the safety and biological activity of rhGH-Lip. Franz diffusion cell study showed increased rhGH skin permeation compared to free rhGH. Animal studies in nude mice showed that liposomal rhGH prevented UVB-induced epidermal hyperplasia, angiogenesis, wrinkle formation, and collagen loss, as well as improving skin moisture. The results of this study show that rhGH-Lip is a stable, safe, and effective skin delivery system and has potential as an anti-wrinkle formulation for topical application. This study also provides a new method for the topical delivery of proteins and merits further investigation.

Pharmacological Functions, Synthesis, and Delivery Progress for Collagen as Biodrug and Biomaterial

Collagen has been widely applied as a functional biomaterial in regulating tissue regeneration and drug delivery by participating in cell proliferation, differentiation, migration, intercellular signal transmission, tissue formation, and blood coagulation. However, traditional extraction of collagen from animals potentially induces immunogenicity and requires complicated material treatment and purification steps. Although semi-synthesis strategies such as utilizing recombinant E. coli or yeast expression systems have been explored as alternative methods, the influence of unwanted by-products, foreign substances, and immature synthetic processes have limited its industrial production and clinical applications. Meanwhile, macromolecule collagen products encounter a bottleneck in delivery and absorption by conventional oral and injection vehicles, which promotes the studies of transdermal and topical delivery strategies and implant methods. This review illustrates the physiological and therapeutic effects, synthesis strategies, and delivery technologies of collagen to provide a reference and outlook for the research and development of collagen as a biodrug and biomaterial.

Synthesis and Characterization of a Novel Composite Edible Film Based on Hydroxypropyl Methyl Cellulose Grafted with Gelatin

A novel composite edible film was synthesized by grafting gelatin chain onto hydroxypropyl methyl cellulose (HPMC) in the presence of glycerol (used as a plasticizer) using a solution polymerization technique. The reaction was carried out in homogeneous aqueous medium. Thermal properties, chemical structure, crystallinity, surface morphology, and mechanical and hydrophilic performance changes of HPMC caused by the addition of gelatin were investigated by differential scanning calorimetry, thermogravimetric, Fourier transform infrared spectroscopy, scanning electron microscopy, X-ray diffraction, universal testing machine and water contact angle. The results shows that HPMC and gelatin are miscible and the hydrophobic property of the blending film can be enhanced with the introduction of the gelatin. Moreover, the HPMC/gelatin blend films are flexible, and exhibit excellent compatibility, good mechanical properties and also thermal stability, and could be promising candidates for food packaging materials.

Research progress of functional motifs based on growth factors in cartilage tissue engineering: A review

Osteoarthritis is a chronic degenerative joint disease that exerts significant impacts on personal life quality, and cartilage tissue engineering is a practical treatment in clinical. Various growth factors are involved in cartilage regeneration and play important roles therein, which is the focus of current cartilage repair strategy. To compensate for the purification difficulty, high cost, poor metabolic stability, and circulating dilution of natural growth factors, the concept of functional motifs (also known as mimetic peptides) from original growth factor was introduced in recent studies. Here, we reviewed the selection mechanisms, biological functions, carrier scaffolds, and modification methods of growth factor-related functional motifs, and evaluated the repair performance in cartilage tissue engineering. Finally, the prospects of functional motifs in researches and clinical application were discussed.

Collagen fabricated delivery systems for wound healing: A new roadmap

Collagen is a biopolymer found in the animal body. It is one of the most abundant proteins in the extracellular matrix that provides strength to the skin, joints, and bones in the human body. It is an important source of elasticity and strength in the extracellular matrix and contributes to the structural and physiological integrity of tissues. Collagen plays an important role in regulating the wound healing process. It helps in wound healing by attracting fibroblasts and encouraging new collagen formation in the wound bed. Therefore, it can be used as a supplementary aid for wound treatment to accelerate the healing process. A prominent benefit of incorporating collagen in wound dressings is its ability to enhance the healing process for critical wounds. Not only collagen but various collagen-containing systems are being prepared to boost its efficacy in wound healing. Different strategies like nanoscale reductions, biopolymers, and incorporating anti-inflammatory and antimicrobial drugs with collagen have been reported. This review article emphasizes the use of collagen for wound healing and various collagen fabricated delivery systems such as nanofibres, nanoparticles, hydrogels, films, and sponges that aid in the healing of wounds.

Fabrication and Characterization of Gelatin/Polyvinyl Alcohol Composite Scaffold

In this study, porous scaffold materials based on polyvinyl alcohol (PVA) and gelatin (Gel) were successfully fabricated and characterized. The mechanism of the reaction, morphology, and crystallinity were investigated by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). In addition, thermogravimetric analysis (TGA) was performed together with differential scanning calorimetry (DSC) for examining the thermostability and phase transformation of the scaffolds. Degradation and swelling studies of PVA/Gel composite scaffold materials were performed in phosphate-buffered saline. Finally, the mechanical performances had been determined. According to the results, the polymer matrix that was formed by the combination of PVA and gelatin had better thermal stability. The synthesized composite scaffold was amorphous in nature. The addition of gelatin did not affect the fishbone-like microstructure of PVA, which ensures the excellent mechanical properties of the PVA scaffold. The denaturation temperature and elastic modulus of the PVA scaffold were improved by the gelatin addition, but the physical and chemical properties of the PVA scaffold were weakened when the gelatin content exceeded 10%. In addition, the PVA-10G sample has suitable degradability. Therefore, the PVA/Gel composite scaffold might potentially be applied in the field of tissue engineering that demands high strength.

Protein materials as sustainable non- and minimally invasive strategies for biomedical applications

Protein-based materials have found applications in a wide range of biomedical fields because of their biocompatibility, biodegradability and great versatility. Materials of different physical forms including particles, hydrogels, films, fibers and microneedles have been fabricated e.g. as carriers for drug delivery, factors to promote wound healing and as structural support for the generation of new tissue. This review aims at providing an overview of the current scientific knowledge on protein-based materials, and selected preclinical and clinical studies will be reviewed in depth as examples of the latest progress within the field of protein-based materials, specifically focusing on non- and minimally invasive strategies mainly for topical application.

Waste-derived biomaterials as building blocks in the biomedical field

Recent developments in the biomedical arena have led to the fabrication of innovative biomaterials by utilizing bioactive molecules obtained from biological wastes released from fruit and beverage processing industries, and fish, meat, and poultry industries. These biological wastes that end up in water bodies as well as in landfills are an affluent source of animal- and plant-derived proteins, bio ceramics and polysaccharides such as collagens, gelatins, chitins, chitosans, eggshell membrane proteins, hydroxyapatites, celluloses, and pectins. These bioactive molecules have been intricately designed into scaffolds and dressing materials by utilizing advanced technologies for drug delivery, tissue engineering, and wound healing relevance. These biomaterials are environment-friendly, biodegradable, and biocompatible, and show excellent tissue regeneration attributes. Additionally, being cost-effective they can reduce the burden on the healthcare system as well as provide a sustainable solution to waste management. In this review, the current trends in the utilization of plant and animal waste-derived biomaterials in various biomedical fields are considered along with a separate section on their applications as xenografts.

Wound coverage by the linen dressing accelerates ulcer healing

Introduction

Chronic ulcers are the main cause of morbidity and mortality, and the incidence of chronic wounds is expected to increase given that people live longer and that there are civil diseases.

Aim

Much attention in the treatment of wounds concerns a dressing that involves wound cleansing, bacterial balance, exudate management and local tissue in a wound environment. These important elements of the evaluation led to the development of an interactive dressing based entirely on flax raw materials.

Material and methods

The complete dressing for wound coverage was prepared from plant (flax) row products: seedcakes, oil, fiber. The content of bioactive compounds (qualitatively and quantitatively) was tested using chromatographic techniques, and their biological activity during tests on fibroblast cell cultures (NHDF). As a final step the clinical trial were performed.

Results

The dressings, which help control the microenvironment, combining with exudate using hydrophilic fibre, controlling the flow of exudate from the wound to the dressing were generated. They stimulate the activity in the healing cascade and accelerate the healing process by combining lignocellulose fibre with higher amounts of phenolic compounds, sterols, cannabidiol and unsaturated fatty acids simultaneously with the 3-hydroxybutyrate polymer. All constituents of linen dressing are natural, originate from two types of the engineered flax plant. Pre-clinical data reveal a reasonable reduction in wound size in patients with chronic leg ulcers treated with a linen dressing.

Conclusions

For the first time, a successful application of the innovative interactive linen dressing in the treatment of chronic wounds was noted.

Nature-Based Biomaterials and Their Application in Biomedicine

Natural polymers, based on proteins or polysaccharides, have attracted increasing interest in recent years due to their broad potential uses in biomedicine. The chemical stability, structural versatility, biocompatibility and high availability of these materials lend them to diverse applications in areas such as tissue engineering, drug delivery and wound healing. Biomaterials purified from animal or plant sources have also been engineered to improve their structural properties or promote interactions with surrounding cells and tissues for improved in vivo performance, leading to novel applications as implantable devices, in controlled drug release and as surface coatings. This review describes biomaterials derived from and inspired by natural proteins and polysaccharides and highlights their promise across diverse biomedical fields. We outline current therapeutic applications of these nature-based materials and consider expected future developments in identifying and utilising innovative biomaterials in new biomedical applications.

Dry vs. wet: Properties and performance of collagen films. Part I. Mechanical behaviour and strain-rate effect

Collagen forms one-third of the body proteome and has emerged as an important biomaterial for tissue engineering and wound healing. Collagen films are used in tissue regeneration, wound treatment, dural substitute etc. as well as in flexible electronics. Thus, the mechanical behaviour of collagen should be studied under different environmental conditions and strain rates relevant for potential applications. This study's aim is to assess the mechanical behaviour of collagen films under different environmental conditions (hydration, submersion and physiological temperature (37 °C)) and strain rates. The combination of all three environment factors (hydration, submersion and physiological temperature (37 °C)) resulted in a drop of tensile strength of the collagen film by some 90% compared to that of dry samples, while the strain at failure increased to about 145%. For the first time, collagen films were subjected to different strain rates ranging from quasi-static (0.0001 s^-1) to intermediate (0.001 s^-1, 0.01 s^-1) to dynamic (0.1 s^-1, 1 s^-1) conditions, with the strain-rate-sensitivity exponent (m) reported. It was found that collagen exhibited a strain-rate-sensitive hardening behaviour with increasing strain rate. The exponent m ranged from 0.02-0.2, with a tendency to approach zero at intermediate strain rate (0.01 s^-1), indicating that collagen may be strain-rate insensitive in this regime. From the identification of hyperelastic parameter of collagen film, it was found that the Ogden Model provides realistic results for future simulations.

Additive Biomanufacturing with Collagen Inks

Collagen is a natural polymer found abundantly in the extracellular matrix (ECM). It is easily extracted from a variety of sources and exhibits excellent biological properties such as biocompatibility and weak antigenicity. Additionally, different processes allow control of physical and chemical properties such as mechanical stiffness, viscosity and biodegradability. Moreover, various additive biomanufacturing technology has enabled layer-by-layer construction of complex structures to support biological function. Additive biomanufacturing has expanded the use of collagen biomaterial in various regenerative medicine and disease modelling application (e.g., skin, bone and cornea). Currently, regulatory hurdles in translating collagen biomaterials still remain. Additive biomanufacturing may help to overcome such hurdles commercializing collagen biomaterials and fulfill its potential for biomedicine.

Evolutionary approaches in protein engineering towards biomaterial construction

The tailoring of proteins for specific applications by evolutionary methods is a highly active area of research. Rational design and directed evolution are the two main strategies to reengineer proteins or create chimeric structures. Rational engineering is often limited by insufficient knowledge about proteins' structure-function relationships; directed evolution overcomes this restriction but poses challenges in the screening of candidates. A combination of these protein engineering approaches will allow us to create protein variants with a wide range of desired properties. Herein, we focus on the application of these approaches towards the generation of protein biomaterials that are known for biodegradability, biocompatibility and biofunctionality, from combinations of natural, synthetic, or engineered proteins and protein domains. Potential applications depend on the enhancement of biofunctional, mechanical, or other desired properties. Examples include scaffolds for tissue engineering, thermostable enzymes for industrial biocatalysis, and other therapeutic applications.

The Collagen Suprafamily: From Biosynthesis to Advanced Biomaterial Development

Collagen is the oldest and most abundant extracellular matrix protein that has found many applications in food, cosmetic, pharmaceutical, and biomedical industries. First, an overview of the family of collagens and their respective structures, conformation, and biosynthesis is provided. The advances and shortfalls of various collagen preparations (e.g., mammalian/marine extracted collagen, cell-produced collagens, recombinant collagens, and collagen-like peptides) and crosslinking technologies (e.g., chemical, physical, and biological) are then critically discussed. Subsequently, an array of structural, thermal, mechanical, biochemical, and biological assays is examined, which are developed to analyze and characterize collagenous structures. Lastly, a comprehensive review is provided on how advances in engineering, chemistry, and biology have enabled the development of bioactive, 3D structures (e.g., tissue grafts, biomaterials, cell-assembled tissue equivalents) that closely imitate native supramolecular assemblies and have the capacity to deliver in a localized and sustained manner viable cell populations and/or bioactive/therapeutic molecules. Clearly, collagens have a long history in both evolution and biotechnology and continue to offer both challenges and exciting opportunities in regenerative medicine as nature's biomaterial of choice.

PLA- and PLA/PLGA-Emulsion Composite Biomaterial Sheets for the Controllable Sustained Release of Hydrophilic Compounds

In the present study, by spin-coating a solution containing w/o (water-in-oil) emulsions and hydrophobic polymers, we obtained sheets possessing uniformly dispersed w/o emulsions. We performed release experiments for more than 100 days and clarified the effects of the number of layers, the sheet-forming polymers (polylactide (PLA), poly(lactic-co-glycolic acid (PLGA)), the ratio of organic solvent to water, and the composition of block copolymers on the release properties of the sheets. For a variety of sheets, we successfully achieved the sustained release of compounds from the sheets for 100–150 days. The sustained-release of compounds occurred because the compounds had to diffuse into polymer networks after their release from the emulsions. Interestingly, we observed an inflection point in the release profiles at around 50 days; that is, the sheet exhibited a “two-step” release behavior. The results obtained in the present study provide strong evidence for the future possibility of the time-programmed release of multiple compounds from sheets.

Acetic acid and pepsin result in high yield, high purity and low macrophage response collagen for biomedical applications

Collagen based devices are frequently associated with foreign body response. Although several pre- (e.g. species, state of animal, tissue) and post- (e.g. cross-linking, scaffold architecture) extraction method factors have a profound effect on foreign body response, little is known about which and how during the extraction process factors mediate foreign body response. In this study, we assessed the influence of acetic acid and hydrochloric acid and the utilisation or not of pepsin or salt precipitation during collagen extraction on the yield, purity, free amines, denaturation temperature, resistance to collagenase degradation and macrophage response. Acetic acid/pepsin extracted collagen exhibited the highest yield, purity and free amine content and the lowest denaturation temperature. No differences in resistance to collagenase digestion were detected between the groups. Although all treatments exhibited similar macrophage morphology comprised of round cells (M1 phenotype), elongated cells (M2 phenotype) and cell aggregates (foreign body response), significantly more elongated cells were observed on HC films. Although no differences in metabolic activity were observed between the groups, the DNA concentration was significantly lower for the hydrochloric acid treatments. Further, cytokine analysis revealed that hydrochloric acid treatments induced significantly higher IL-1β and TNF-α release with respect to acetic acid treatments. Salt precipitation did not influence the parameters assessed. Collectively, these data suggest that during the collagen extraction process variables should also be monitored as, evidently, they affect the physicochemical and biological properties of collagen preparations.

Application of Materials as Medical Devices with Localized Drug Delivery Capabilities for Enhanced Wound Repair

The plentiful assortment of natural and synthetic materials can be leveraged to accommodate diverse wound types, as well as different stages of the healing process. An ideal material is envisioned to promote tissue repair with minimal inconvenience for patients. Traditional materials employed in the clinical setting often invoke secondary complications, such as infection, pain, foreign body reaction, and chronic inflammation. This review surveys the repertoire of surgical sutures, wound dressings, surgical glues, orthopedic fixation devices and bone fillers with drug eluting capabilities. It highlights the various techniques developed to effectively incorporate drugs into the selected material or blend of materials for both soft and hard tissue repair. The mechanical and chemical attributes of the resultant materials are also discussed, along with their biological outcomes in vitro and/or in vivo. Perspectives and challenges regarding future research endeavors are also delineated for next-generation wound repair materials.

Poly(ɛ-caprolactone) (PCL)-polymeric micelle hybrid sheets for the incorporation and release of hydrophilic proteins

Sheets have several advantages over conventional gel- or particle-type drug carriers. Sheets have several notable attributes: sheets' size and shape are easily adjustable, sheets are highly accessible in surgery, and sheets have a large contact area relative to drug-targeting sites. However, it is difficult to incorporate hydrophilic proteins into hydrophobic sheets and to release the proteins over the long term in a sustained manner. In the present study, we show that "poly(ɛ-caprolactone) (PCL)-polymeric micelle hybrid sheets" can be used for the incorporation and release of hydrophilic proteins. Polymeric micelles (i.e., spaces that can incorporate hydrophilic compounds) are, in this study, uniformly dispersed in hydrophobic and biocompatible biomaterial sheet. We have clarified that the composition of block copolymer, methoxy-terminated poly(ethylene glycol)-block-poly(ɛ-caprolactone) (CH3O-PEG-b-PCL), can affect two variables: the stability of w/o emulsion and the release properties of the resulting sheets, by means of visual qualitative observations, newly developed quantitative analyses (advanced fractal analysis, advanced FD) based on deviation of the fractal dimension (FD), and release experiments. We clarified that the release behavior of BSA was affected by the composition of the block copolymers and the resulting emulsion. The results obtained in this paper show that the hydrophobic sheets in which polymeric micelles providing hydrophilic spaces were dispersed could be an effective platform for incorporating and releasing hydrophilic proteins.

Review collagen-based biomaterials for wound healing

With its wide distribution in soft and hard connective tissues, collagen is the most abundant of animal proteins. In vitro, natural collagen can be formed into highly organized, three-dimensional scaffolds that are intrinsically biocompatible, biodegradable, nontoxic upon exogenous application, and endowed with high tensile strength. These attributes make collagen the material of choice for wound healing and tissue engineering applications. In this article, we review the structure and molecular interactions of collagen in vivo; the recent use of natural collagen in sponges, injectables, films and membranes, dressings, and skin grafts; and the on-going development of synthetic collagen mimetic peptides as pylons to anchor cytoactive agents in wound beds.

Antimicrobial and release study of drug loaded PVA/PEO/CMC wound dressings

The aim of the present study was to develop PVA/PEO/CMC/aloe vera (PPCAV) and PVA/PEO/CMC/curcumin (PPCCu) dressings with nonwoven polyester fabric as the support layer via freeze-drying (FD) approach. Tetracycline hydrochloride drug (TC) was loaded along with curcumin and aloe vera on these dressings. The morphology of the dressings was characterized by scanning electron microscopy. The swelling behavior, water vapor transmission rate (WVTR), in vitro drug release and antimicrobial nature were analyzed to assess the applicability of these freeze-dried membranes as wound dressing materials. The results show that these dressings made from PPCAVTC and PPCCuTC were highly porous with three-dimensional interconnected porous morphology. The cumulative release of drug from the dressings increases with increasing immersion time and continued up to 24 h, after that it gets leveled off. These dressings evidenced wonderful antimicrobial nature in vitro. These dressings were found to have more than 900 % PBS uptake, WVTR was found to be in the range 2,000-2,500 gm(-2) day(-1). These dressings possess many characteristics desirable in an ideal wound dressing material.

Collagen: finding a solution for the source

Extracellular matrix (ECM)-based scaffolds, through their inherent bioactivity and molecular recognition signals, provide the ideal substrate for tissue engineering and regenerative applications. Collagen, the most abundant ECM protein, has proven itself to be a very versatile material with applications in many fields, including the leather and food industries, cosmetics, drug delivery, and tissue engineering. However, doubts persist about the optimal source of collagen for tissue engineering applications, given possible immunogenicity and disease transmission associated with animal sources and reduced bioactivity and availability of recombinant technologies. In this special edition, an attempt is made to elucidate the advantages of plant-derived human recombinant collagen and its applications in tissue engineering, particularly skin and wound healing. While results are promising, the widespread use of animal-derived collagen means that recombinant technologies may find applications in niche areas.

Development of perforated microthin poly(ε-caprolactone) films as matrices for membrane tissue engineering

The design and fabrication of thin films based on bioresorbable polymers such as poly(epsilon-caprolactone) (PCL) has been the focus of a part of current biomedical research, especially as matrices for membrane tissue engineering. We have successfully developed perforated microthin PCL membrane for this purpose. Two critical issues are the control of moisture permeability and understanding the degradation of PCL microthin film. In order to increase the moisture permeability. PCL films were biaxially stretched to a thickness of 10 +/- 3 microm and perforated with uniform array of holes (180-275 microm) using a Sony Robotic system. After perforation, the water vapour transmission rate was increased by 50% to a value of 47.6 +/- 2.7 g/h per m2. Accelerated hydrolytic degradations were performed in 5 M NaOH. The degraded samples were characterised for changes in weight, surface morphology, mechanical properties, crystallinity and molecular weight. Hydrolytic degradation commenced with random chain scission of backbone ester bonds on the film surface and followed by loss of material due to surface erosion. In general, the perforated films degraded faster than the unperforated microthin films. Scanning electron microscopic images showed that surface erosion led to extensive formation of micropores, microcracks and increased in surface roughness.

Natural and Genetically Engineered Proteins for Tissue Engineering

To overcome the limitations of traditionally used autografts, allografts and, to a lesser extent, synthetic materials, there is the need to develop a new generation of scaffolds with adequate mechanical and structural support, control of cell attachment, migration, proliferation and differentiation and with bio-resorbable features. This suite of properties would allow the body to heal itself at the same rate as implant degradation. Genetic engineering offers a route to this level of control of biomaterial systems. The possibility of expressing biological components in nature and to modify or bioengineer them further, offers a path towards multifunctional biomaterial systems. This includes opportunities to generate new protein sequences, new self-assembling peptides or fusions of different bioactive domains or protein motifs. New protein sequences with tunable properties can be generated that can be used as new biomaterials. In this review we address some of the most frequently used proteins for tissue engineering and biomedical applications and describe the techniques most commonly used to functionalize protein-based biomaterials by combining them with bioactive molecules to enhance biological performance. We also highlight the use of genetic engineering, for protein heterologous expression and the synthesis of new protein-based biopolymers, focusing the advantages of these functionalized biopolymers when compared with their counterparts extracted directly from nature and modified by techniques such as physical adsorption or chemical modification.

The effect of incorporation of exogenous stromal cell-derived factor-1 alpha within a knitted silk-collagen sponge scaffold on tendon regeneration

This study developed a bioactive knitted silk-collagen sponge scaffold by incorporation of exogenous SDF-1 alpha, to enable selective migration and homing of cells for in situ tendon regeneration. With in vitro studies, it was observed that CXCR4 gene expression and migration of bone mesenchymal stromal cells and hypo-dermal fibroblasts were more sensitive to exogenous SDF-1 alpha, while expression of tendon repair gene markers by hypo-dermal fibroblasts and Achilles tendon fibroblasts were more sensitive to exogenous SDF-1 alpha. With a rat Achilles tendon injury model, exogenous SDF-1 alpha was shown to reduce infiltration of inflammatory cells and enhance migration of fibroblast-like cells into the scaffold at 4 days and 1 week post-surgery. After 4 weeks, SDF-1 alpha treated tendon had increased expression of tendon repair gene markers and endogenous SDF-1 alpha, exhibited more physiological microstructures with larger diameter collagen fibrils, and had better biomechanical properties than the control group. Hence, our bioactive scaffold improved efficacy of tendon regeneration by increasing the recruitment of fibroblast-like cells, enhancing local endogenous SDF-1 alpha and tendon extracellular matrix production, and decreasing accumulation of inflammatory cells. Incorporation of SDF-1 alpha within a knitted silk-collagen sponge scaffold can therefore be a practical application for tendon tissue engineering.

Differentiation of pre-osteoblast cells on poly(ethylene terephthalate) grafted with RGD and/or BMPs mimetic peptides

The bone morphogenetic proteins (BMPs) are cytokines of the transforming growth factor beta family. Some BMPs such as BMP-2, BMP-7 and BMP-9 play a major role in the bone and cartilage formation. The BMP peptides corresponding to residues 73-92, 89-117, and 68-87 of BMP-2, BMP-7 and BMP-9 respectively as well as adhesion peptides (GRGDSPC) were grafted onto polyethylene terephthatalate (PET) surfaces. We evaluated the state of differentiation of pre-osteoblastic cells. The behavior of these cells on various functionalized surfaces highlighted the activity of the mimetic peptides immobilized on surfaces. The induced cells (observed in the case of surfaces grafted with BMP-2, 7 or 9 mimetic peptides and GRGDSPC peptides) were characterized on several levels. First of all, we focused on the evaluation of the osteoblastic markers such as the transcriptional factor Runx2, which is a critical regulator of osteoblastic differentiation. Secondly, the results obtained showed that these induced cells take a different morphology compared to the cells in a state of proliferation or in a state of extracellular matrix production. Induced cells were characterized by an increased thickness compared to non-induced cells. Thus, our studies prove a direct correlation between cell morphology and state of induction. Thereafter, we focused on characterizing the extracellular matrix formed by the cells on various surfaces. The extracellular matrix thickness was more significant in the case of surfaces grafted with mimetic peptides of the BMP-2, 7 or 9 and GRGDSPC peptides which once again proves their activity when immobilized on material surface. These results demonstrate that GRGDSPC and BMPs peptides, grafted to PET surface, act to enhance osteogenic differentiation and mineralization of pre-osteoblastic cells. These findings are potentially useful in developing engineered biomaterials for bone regeneration.

Wound healing dressings and drug delivery systems: a review

The variety of wound types has resulted in a wide range of wound dressings with new products frequently introduced to target different aspects of the wound healing process. The ideal dressing should achieve rapid healing at reasonable cost with minimal inconvenience to the patient. This article offers a review of the common wound management dressings and emerging technologies for achieving improved wound healing. It also reviews many of the dressings and novel polymers used for the delivery of drugs to acute, chronic and other types of wound. These include hydrocolloids, alginates, hydrogels, polyurethane, collagen, chitosan, pectin and hyaluronic acid. There is also a brief section on the use of biological polymers as tissue engineered scaffolds and skin grafts. Pharmacological agents such as antibiotics, vitamins, minerals, growth factors and other wound healing accelerators that take active part in the healing process are discussed. Direct delivery of these agents to the wound site is desirable, particularly when systemic delivery could cause organ damage due to toxicological concerns associated with the preferred agents. This review concerns the requirement for formulations with improved properties for effective and accurate delivery of the required therapeutic agents. General formulation approaches towards achieving optimum physical properties and controlled delivery characteristics for an active wound healing dosage form are also considered briefly.

Use of microparticulate systems to accelerate skin wound healing

Rapid and proper healing is important in the treatment of skin wounds. The dressing achieves the functions of the natural skin by protecting the wound area from the bulk loss of tissue and creating an effective barrier to outside contaminants without increasing the bacterial load on the wound surface. There are many wound dressings available on the market which can be used in the healing process. Different dressings have been used according to the condition of the wound and the phases of wound healing. Biodegradable polymers are being widely used in drug delivery and also in wound healing. These polymers that are applicable as a wound dressing protect the wound site against unwanted external effects, inhibit wound contraction, and, if possible, stimulate the healing process. Micro- and nanoparticulates are currently being evaluated as a potential drug delivery in clinical applications. Growth factors also play a vital role in wound healing. Polymers used in wound healing act as sustained release vehicles for growth factors. Controlled release of growth factors from microspheres has provided a higher degree of healing in the wound areas. This review is intended to provide information regarding the various formulations and microparticulate systems used in wound healing.

Evaluation of the release rate of bioactive recombinant human epidermal growth factor from crosslinking collagen sponges

The purpose of this study was to prepare recombinant human epidermal growth factor (rhEGF) collagen sponges for topical applications and investigate the effects of different types of crosslinked collagen sponges as platforms for the controlled release of rhEGF. The microstructure and the drug release rates of collagen sponges were modified through treatment with different types (glutaraldehyde (GTA), genipin and 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC)), different concentrations of crosslinking agents and various preparation conditions. A controlled release profile was observed for the crosslinked collagen sponges as compared to the non-crosslinked ones. The results indicated that the GTA crosslinked sponges have the most potent controlling effect. As the amount of GTA increased, a greater rigidity of the collagen sponge structure combined with a lower hydrophilicity was observed, leading to a decreased drug release rate and an increased water uptake. This study also demonstrated that a good correlation was obtained for in vitro release rates of rhEGF using the power model. The crosslinked rhEGF collagen sponges showed a successful delivery of rhEGF in bioactive form to stimulate cell proliferation.

Pexiganan-incorporated collagen matrices for infected wound-healing processes in rat

The use of peptide-based drugs is limited by their rapid degradability and toxicity at high concentration during their therapeutic application. These problems could be managed by the use of a peptide delivery agent for sustained release in the site of action. Collagen is one of the most proven biomaterials of good biocompatibility with an exceptional ligand encapsulating property. In this work, we have shown that pexiganan, an antimicrobial, 22-amino-acid peptide could be incorporated and delivered to the wound-healing site against bacterial strains Pseudomonas aeruginosa and Staphylococcus aureus. The release profiles of pexiganan collagen films with different collagen concentration were studied. The release of pexiganan from 2.5% w/w of collagen film showed a sustainable activity over 72 h with effective antimicrobial concentrations. Pexiganan-incorporated collagen (PIC)-treated groups were compared with open wound (OW)- and collagen film (CF)-treated rats. PIC-treated animals showed a diminishing level of bacterial growth as compared with OW- and CF-treated animals. The biochemical parameters such as hydroxyproline, protein, DNA, uronic acid, hexosamine, SOD, and catalase content in the granulation tissue of the healing wound revealed increased proliferation of cells involved in tissue reconstruction in PIC-treated groups when compared with OW- and CF-treated groups. Furthermore, spectroscopic studies suggested that collagen structure is not perturbed by pexiganan incorporation. This study provides rationale for application of collagen membrane for antimicrobial peptide delivery in infected wounds.

Review of novel particulate antigen delivery systems with special focus on treatment of type I allergy

For the treatment of infectious diseases, cancer and allergy, the directed induction of an appropriate immune response is the ultimate goal. Therefore, with the development of pure, often very small proteins, peptides or DNA by molecular biology techniques, the research for suitable adjuvants or delivery systems became increasingly important. Particle formulations are made of a variety of materials, including lipids, proteins or amino acids, polysaccharides, polyacrylic substances or organic acids. Microparticles serve as vehicles and provide a depot for the entrapped or coupled antigen. The release occurs in a pulsatile or continuous manner, a feature, which is well controllable for many particulate systems. Particles attract antigen presenting cells to the administration site, thereby guaranteeing the efficient presentation of the antigen to the immune system. Importantly, particles also protect the entrapped substance. This is especially necessary after oral application to avoid gastric or tryptic breakdown. In this article, the design and construction of different antigen delivery systems and their immune effects, with special focus on the suitability for allergy treatment, are discussed.

Biological characterization of EDC-crosslinked collagen-hyaluronic acid matrix in dermal tissue restoration

Porous collagen matrices crosslinked with various amounts of hyaluronic acid (HA) by 1-ethyl-3-(3-dimethyl aminopropyl)carbodiimide (EDC) were developed as scaffolds for dermal tissue regeneration. The effect of HA on cells in accordance with HA concentrations in the collagenous matrices was investigated using cultures of fetal human dermal fibroblasts, and the effect of EDC-crosslinked collagen-HA matrix on wound size reduction was also evaluated in vivo. Scanning electron microscopic views of the matrices demonstrated that all of the collagen-HA matrices had interconnected pores with mean diameters of 150-250 microm. An HA matrix retention test showed that the concentration of HA decreased slowly after an initial rapid decrease over 24h. Fetal human dermal fibroblasts adhered well to all of the collagen-based matrices as compared with the Porous polyurethane matrix used as a control. An 3-(4,5-dimethylthiazolyl)-2,5-diphenyltetrazolium bromide based proliferation test and the hematoxylin and eosin staining of a 2 week cultured matrix showed that the proliferation of fibroblasts was enhanced on a 9.6% HA contained collagen matrix. No significant difference was in terms of fibroblast migration into the various types of scaffolds as HA content was increased. In vivo testing showed that dermis treated with collagen or collagen-HA matrix was thicker than the control, and epithelial regeneration was accelerated, and collagen synthesis increased. However, no significant effect of HA on wound size reduction was found.