Modulated release of IdUrd from poly (D,L-lactide-co-glycolide) microspheres by addition of poly (D,L-lactide) oligomers

Development of a magnetic nano-graphene oxide carrier for improved glioma-targeted drug delivery and imaging: In vitro and in vivo evaluations

To overcome the obstacles inflicted by the BBB in Glioblastoma multiforme (GBM) we investigated the use of Multifunctional nanoparticles that designed with a Nano-graphene oxide (NGO) sheet functionalized with magnetic poly (lactic-co-glycolic acid) (PLGA) and was used for glioma targeting delivery of radiosensitizing 5-iodo-2-deoxyuridine (IUdR). In vitro biocompatibility of nanocomposite has been studied by the MTT assay. In vivo efficacy of magnetic targeting on the amount and selectivity of magnetic nanoparticles accumulation in glioma-bearing rats under an external magnetic field (EMF) density of 0.5 T was easily monitored with MRI. IUdR-loaded magnetic NGO/PLGA with a diameter of 71.8 nm, a zeta potential of -33.07 ± 0.07 mV, and a drug loading content of 3.04 ± 0.46% presented superior superparamagnetic properties with a saturation magnetization (Ms) of 15.98 emu/g. Furthermore, Prussian blue staining showed effective magnetic targeting, leading to remarkably improved tumor inhibitory efficiency of IUdR. The tumor volume of rats after treatment with IUdR/NGO/SPION/PLGA + MF was decreased significantly compared to the rats treated with buffer saline, IUdR and SPION/IUdR/NGO/PLGA. Most importantly, our data demonstrate that IUdR/NGO/SPION/PLGA at the present magnetic field prolongs the median survival time of animals bearing gliomas (38 days, p < 0.01). Nanoparticles also had high thermal sensitivities under the alternating magnetic field. In conclusion, we developed magnetic IUdR/NGO/PLGA, which not only achieved to high accumulation at the targeted tumor site by magnetic targeting but also indicated significantly enhanced therapeutic efficiency and toxicity for glioma both in vitro and in vivo. This innovation increases the possibility of improving clinical efficiency of IUdR as a radiosensitizer, or lowering the total drug dose to decrease systemic toxicity.

5-Fluorouracil encapsulated HA/PLGA composite microspheres for cancer therapy

5-Fluorouracil (5FU) was successfully entrapped within poly(lactide-co-glycolide) (PLGA) and hydroyapatite (HA) composite microspheres using the emulsification/solvent extraction technique. The effects of HA to PLGA ratio, solvent ratio as well as polymer inherent viscosity (IV) on encapsulation efficiency were investigated. The degradation and drug release rates of the microspheres were studied for 5 weeks in vitro in phosphate buffered solution of pH 7.4 at 37 °C. The drug release profile followed a biphasic pattern with a small initial burst followed by a zero-order release for up to 35 days. The initial burst release decreased with increasing HA content. The potential of HA in limiting the initial burst release makes the incorporation of HA into PLGA microspheres advantageous since it reduces the risk of drug overdose from high initial bursts. The linear sustained drug release profile over the course of 5 weeks makes these 5-FU-loaded HA/PLGA composite microparticles a promising delivery system for the controlled release of chemotherapy drugs in the treatment of cancer.

Sterilization of gentamicin containing collagen/PLGA microparticle composites

In order to achieve implants which provide sustained release of gentamicin, microparticles based on a 50/50 Resomer 503/Resomer 502H blend were combined with collagen in order to achieve their fixation and to utilize the favorable effect of collagen on wound healing. Ethylene oxide treatment as well as beta- and gamma-irradiation were tested for sterilization of the collagen/PLGA-microparticle composite. All methods resulted in a decrease of molecular weight and glass transition temperature of polymer raw material and microparticles. In addition, ethylene oxide treatment yielded aggregation of microparticles leading to a substantial increase in the initially liberated gentamicin dose. Furthermore, chemical changes of gentamicin after ethylene oxide sterilization could be identified using NMR spectroscopy. Despite a decrease in the molecular weight and glass transition temperature after irradiation, neither morphological changes of the composites nor changes regarding the gentamicin release profile from beta- and gamma-sterilized material were observed. Free radicals, which could only be detected in gentamicin drug substance and at marginal level in gentamicin-loaded MPs, disappeared within 4 weeks. Additional microbiological testing verified the microbiological activity of gentamicin liberated from beta-sterilized composites. Storage of beta-sterilized composite at 4 degrees C/35% r.h. for 3 months did not influence morphology, molecular weight, glass transition temperature, and release profiles of microparticles and composites. However, at 25 degrees C/60% r.h. and 40 degrees C/75% r.h. a marked decrease in molecular weight and glass transition temperature resulted. This effect was due to a higher humidity, water uptake into polymers, and subsequent hydrolysis of polymers and microparticles, which was more pronounced for RG 502H because of its hydrophilicity. Upon storage at 25 degrees C/60% r.h. and 40 degrees C/75% r.h. particles collapsed resulting in an increased gentamicin liberation. Thus, all sterilization techniques have their pros and cons, but based on drug release profile and chemical changes of gentamicin irradiation treatment appears to be more suitable for collagen/gentamicin-loaded PLGA microparticle composites.

Development and characterization of interleukin-18-loaded biodegradable microspheres

Immunostimulation represents a promising approach designed to specifically eradicate malignant cells. Since glioma tumour cells hole up in the central nervous system (CNS) in a particularly inauspicious milieu to antitumour immune reactions we here propose a new strategy to revert the properties of this microenvironment by administering an antitumour cytokine into the CNS tumour itself. Thus, biodegradable poly(D,L-lactide-co-glycolide) (PLGA) sustained-release microspheres for stereotaxic implantation loaded with interleukin-18 (IL-18), that is known to exert antitumour activity and trigger immune cell-mediated cytotoxicity, were developed. Different tests for assessing IL-18 bioactivity were set-up and evaluated. A specific bioassay was considered as the most reliable test. The stability and integrity of IL-18 was then verified during the encapsulation process. Consequently, two procedures of IL-18 encapsulation in PLGA microparticles (W/O/W and S/O/W) were investigated. As determined by radiolabelling studies using 125I-IL-18 and a continuous flow system, the in vitro release profile of IL-18 was optimum with S/O/W method with a moderate burst effect and a subsequent progressive discharge of 16.5+/-8.4 ng/day during the next 21 days against 6.1+/-4.2 ng/day with the W/O/W method. Considering analytical testing of IL-18 together with its preserved biological activity after release from microspheres, amounts of the active cytokine obtained with S/O/W method were relevant to plan in vivo evaluation to validate the therapeutic strategy.

Drug delivery into the brain using poly(lactide-co-glycolide) microspheres

Among the strategies developed for drug delivery into the CNS, locally controlled drug release by the way of an implantable polymeric device has been developed in recent years. The first polymeric devices developed were macroscopic implants needing open surgery for implantation. Over the last few years, poly(lactide-co-glycolide) microspheres have been shown to be safe and promising for drug delivery into the brain. Poly(lactide-co-glycolide) is biodegradable and biocompatible with brain tissue. Due to their size, these microspheres can be easily implanted by stereotaxy in discrete, precise and functional areas of the brain without causing damage to the surrounding -tissue. Brain tumour treatments have been developed using this approach and clinical trials have been performed. Potential applications in neurodegenerative diseases have also been explored, particularly neurotrophic factor delivery and cell therapy.

Development of novel 5-FU-loaded poly(methylidene malonate 2.1.2)-based microspheres for the treatment of brain cancers

In order to treat malignant brain tumors by local delivery of antineoplastic agents, the feasibility of 5-fluorouracil (5-FU)-sustained release biodegradable microspheres with a novel material, poly(methylidene malonate 2.1.2), was investigated using an emulsion/extraction method. This polymer was expected to present a slow degradation rate, thus leading to a long term local delivery system. Microparticles were successfully obtained and characterized in terms of drug loading, size, morphology and release profile. The size of the particles was between 40 and 50 microm, which was compatible with a stereotactic injection through a needle. Sufficient drug loadings were obtained (i.e. compatible with the preparation of therapeutic 5-FU doses in a minimal volume of injection), and perfectly spherical microspheres were observed. The respective influences of the polymer molecular weight, the polymer concentration, and the emulsion time on the release profiles were studied using a 2(3) factorial design. In the same objective, the solvent extraction time was extended while keeping all the previous parameters fixed at their optimal values. The in vitro study of these different parameters allowed a reduction of the initial burst release, with a percentage of 5-FU released after 24 h that was lowered from 90 to 65%, and the achievement of a long term drug delivery system, since the release was still ongoing after 43 days. Moreover, the microparticles could be gamma-sterilized (25 kGy) without modification of the release kinetics. Thus, the requested specifications to perform animal experiments were attained.

Stereotaxic implantation of 5-fluorouracil-releasing microspheres in malignant glioma

BACKGROUND

The authors developed a new method of drug delivery into the brain using implantable, biodegradable microspheres. The strategy was evaluated initially to provide localized and sustained delivery of the radiosensitizer 5-fluorouracil (5-FU) after patients underwent surgical resection of malignant glioma. In this study, the microspheres were implanted by stereotaxy into deeply situated and inoperable brain tumors.

METHODS

Ten patients with newly diagnosed, inoperable, malignant gliomas were included in the study, and 1 dose of 5-FU was studied (132 mg). After histologic confirmation, a suspension of poly(D-L lactide-co-glycolide) 5-FU-loaded microspheres was implanted by stereotaxy into the tumor in one or several trajectories with one to seven deposits per trajectory. External beam radiation (59.4 grays) was started before postoperative Day 7. Patients were followed by clinical examination, computed tomography scanning, magnetic resonance imaging, and 5-FU assays in blood and cerebrospinal fluid (CSF).

RESULTS

The number of trajectories was adapted to the size and shape of the tumor. Microsphere implantation was tolerated well, except in four patients who received a single trajectory and experienced a transitory worsening of preexisting neurologic symptoms. There were no episodes of edema or hematologic complications. 5-FU was detected in CSF and blood in some patients at very low concentrations. The median overall survival was 40 weeks, with 2 patients who had longer survival (71 weeks and 89 weeks, respectively).

CONCLUSIONS

In this study, the authors demonstrated that biodegradable microspheres could be implanted by stereotaxy and were efficient systems for drug delivery into brain tumors. This method may have future applications in the treatment of patients other malignancies.

Hydrolytic degradation of poly(lactide-co-glycolide) films: effect of oligomers on degradation rate and crystallinity

Oligomers are thought to accelerate the hydrolytic degradation of devices prepared from poly(lactide-co-glycolide), PLGA, due to their increased number of carboxylic end groups. To experimentally verify this hypothesis, two D,L-lactic acid oligomers having molecular weights close to their critical limit of solubility were synthesized and incorporated into PLGA films in three concentrations (0, 10, and 30% w/w). All films were translucent, rather flexible and initially amorphous. With increasing oligomer concentration the glass transition temperature (T(g)) and the molecular weight of films decreased prior to erosion. The degradation studies show that initial mass loss and water absorption are increased in oligomer-containing films as a function of average molecular weight and oligomer concentration. However, the incorporation of oligomers does not accelerate the degradation of films. By contrast, oligomer-containing films show extended lag phase until onset of polymer erosion. This was shown to be related to crystallization. Moreover, it was found that crystallization occurs earlier in oligomer-containing films and that the degree of crystallization is related to the average molecular weight of the oligomer. These findings bring new insight into the role of oligomers in the degradation process and can be used to explain why erosion in massive polymer devices occurs from the center to the surface.

Sustained release system for highly water-soluble radiosensitizer drug etanidazole: irradiation and degradation studies

Etanidazole (one nitro-imidazole hypoxic radiosensitizer) is formulated as polymer matrix type controlled release devices in this study. A novel double polymer drug carrier, unlike the double wall microparticles, is fabricated for the purpose of drug delivery, with the following objectives in mind: (1) to have a high encapsulation efficiency, (2) to achieve a pusatile release profile suitable for the radiation schedule of radiotherapy, (3) to elucidate the degradation profile of these microparticles. Irradiation of the microparticles were also studied to investigate effects on release and degradation. At a dosage of 50 Gy (total dosage during a radiotherapy treatment period) showed no apparent effects on the tri-phase release profile. It consists of an initial burst in the first 72 h, followed by a slow and steady drug release phase, and finally a faster degradation controlled phase corresponding to the degradation state of the different microparticles. At 25 kGy (sterilization dosage), the release profiles of the drug carrier were drastically modified. The faster erosion of the polymer with high dosage irradiation hastened the drug release and shortened the release time span, accompanied by decreases in the polymer molecular weight and glass transition temperatures, which was not apparent from SEM imaging. Degradation studies suggested a heterogeneous degradation process, with the outer layer and inner matrix degrading at different rates. The modifiable tri-phase release profile using microparticles of different polymer blends implies that the release properties of the drug carriers can be modified for different treatment regimes.

Implantable drug-releasing biodegradable microspheres for local treatment of brain glioma

Our group have developed a new method of drug delivery into the brain using implantable biodegradable microspheres. In this mini-review, we describe the development, preclinical studies and clinical trials involving 5-fluorouracil-releasing microspheres for interstitial radiosensitization of malignant glioma. Future developments concerning these microspheres for treatment of brain tumors are presented.

Oxaliplatin loaded PLAGA microspheres: design of specific release profiles

Oxaliplatin loaded PLAGA microspheres have been prepared by solvent extraction process. Parameters affecting the release kinetics in vitro have been studied in order to design specific release profiles suitable for direct intra-tumoral injection. By varying the nature and the relative proportions of different polymers we managed to prepare microspheres with good encapsulation efficiency (75-90%) and four different release profiles: zero order kinetics (type II) and the classical sigmoïd release profile with three different sizes of plateau and burst. These results, if correlated with in vivo activity, are promising to enhance effectiveness of local tumor treatment.

Sustained release of etanidazole from spray dried microspheres prepared by non-halogenated solvents

Etanidazole, a kind of radiosensitizer, was encapsulated in the spray-dried microspheres using biodegradable polymer PLGA 65:35 as the carrier for controlled release applications. Two non-halogenated solvents, e.g., ethyl acetate (EA) and ethanol, were tested to modify the properties of microspheres prepared by the commonly used solvent dichloromethane (DCM) alone. Their effects on the release behavior, morphology, particle size, and encapsulation efficiency of etanidazole-loaded microspheres were determined, and results were compared with DCM. The particle formation process via spray drying technique was also analyzed in order to understand the results obtained. It was found that larger percentage of EA (in the solvent mixture consisting of DCM and EA) in the fabrication of PLGA 65:35 microspheres decreases the initial burst, release rate and prolongs the release duration of etanidazole. In contrast to the spherical and porous microspheres prepared by DCM, the microspheres prepared by the solvent EA are all nonporous with a doughnut like surface structure due to its comparatively rapid phase transition (phase inversion) but slow solvent evaporation rate (longer time required to solidify). Increasing the polymer concentration (e.g., 4%, w/v) can bring about much more spherical microspheres by spray drying. Although ethanol, as a co-solvent, can dissolve a higher amount of etanidazole and lead to a higher drug encapsulation efficiency, the addition of ethanol in the DCM solvent can significantly increase the initial burst and the release rate of the microspheres due to the inhomogeneous drug distribution and structure of microspheres caused by phase separation. This study shows that ethyl acetate is an excellent low-toxic solvent that can be used in the spray drying technique for decreasing the initial burst, prolonging the release duration of a highly water-soluble drug like etanidazole. The use of EA provides a promising way to develop a sustained release system for etanidazole and other highly water-soluble drugs.

Anti-cancer drug diffusion within living rat brain tissue: an experimental study using [3H](6)-5-fluorouracil-loaded PLGA microspheres

This study was performed (i) to monitor the diffusion of the anti-cancer drug 5-fluorouracil (5-FU) and (ii) to elucidate the fate of poly(lactide-co-glycolide) (PLGA) based microspheres within living rat brain tissue upon intracranial implantation. Drug-loaded microparticles were prepared using a solvent emulsion/extraction process and administered into healthy and C6 glioma-bearing Sprague-Dawley rats. The same surgical procedure was carried out with magnetite-loaded microspheres. To monitor 5-FU diffusion from the implantation site, tissue combustion was performed on animals implanted with tritiated drug microspheres. T2-weighted nuclear magnetic resonance imaging was undertaken on animals implanted with magnetite-loaded microspheres to determine microsphere localization after deposit. Results show that an important microparticle backflow occurs in healthy rats, whereas the microspheres remain at the site of administration in C6 glioma-bearing rats. Drug diffusion is limited to the vicinity of the implantation site.

Dexamethasone/PLGA microspheres for continuous delivery of an anti-inflammatory drug for implantable medical devices

The purpose of this research was to develop polylactic-co-glycolic acid (PLGA) microspheres for continuous delivery of dexamethasone for over a 1-month period, in an effort to suppress the acute and chronic inflammatory reactions to implants such as biosensors, which interfere with their functionality. The microspheres were prepared using an oil-in-water emulsion technique. The oil phase was composed of 9:1 dichloromethane to methanol with dissolved PLGA and dexamethasone. Some microspheres were predegraded for 1 or 2 weeks. Ten percent of polyethylene glycol was added to the oil phase in alternative formulations to delay drug release. The in vitro release studies were performed in a constant temperature (37 C) warm room, in phosphate-buffered saline at sink conditions. Drug loading and release rates were determined by HPLC-UV analysis. The standard microsphere systems did not provide the desired release profile since, following an initial burst release, a delay of 2 weeks occurred prior to continuous drug release. Predegraded microspheres started to release dexamethasone immediately but the rate of release decreased after only 2 weeks. A mixed standard and predegraded microsphere system was used to avoid this delay and to provide continuous release of dexamethasone for 1 month.

Therapeutic efficacy of 5-fluorouracil-loaded microspheres on rat glioma: a magnetic resonance imaging study

The aim of this work was to assess the therapeutic efficacy of an intratumoral bolus injection of 5-fluorouracil (FU) compared to that of drug loaded in biodegradable microspheres, for the treatment of brain tumour. Experiments were carried out using a fast-growing C6-glioma rat model. The therapeutic protocols were performed 12 days after the injection of glioma cells. At this stage, the tumours were installed and the mean volume was 13 +/- 2 microl as measured by proton magnetic resonance (MR) imaging. This technique was used for the follow-up of the tumour volume with respect to time and therapy. In terms of rat survival, both therapies induced a significant 50% increase in animal life span (p < 0.05) compared to animals receiving no drug or unloaded microspheres. Whilst no cure was observed, analysis of the MR images showed that the local and sustained delivery of FU slowed the tumour development in the vicinity of the microspheres by a factor of 3, compared with the bolus intratumoral injection.

Long-term sustained release of ganciclovir from biodegradable scleral implant for the treatment of cytomegalovirus retinitis

The previous scleral implant composed of poly(D, L-lactide-co-glycolide) with ganciclovir (GCV) had some disadvantages such as the second burst in the late phase of release. In this study, the GCV release rate from scleral implants was modified by blending poly(D,L-lactide) (PLA) of two different molecular weights. The scleral implants were prepared by blending PLA-70000 (molecular weight: 70000) and PLA-5000 (molecular weight: 5000) or PLA-130000 (molecular weight: 130000) and PLA-5000 at weight ratios of 100/0, 95/5, 90/10, 80/20, and 0/100. In vitro release tests were performed in 0.1 M phosphate-buffered solution (pH 7.4) at 37 degrees C. An increase in the blended amount of PLA-5000 clearly accelerated the GCV release and the onset of the second burst in the late phase of release tended to delay. The two implants both prepared at a blend ratio of 80/20 successfully prevented the second burst and the GCV release profiles followed the pseudozero-order kinetics after the initial burst as resulting from a diffusional mechanism following Higuchi's equation. Duration of the sustained GCV release could be controlled by changing the blending ratio of high and low molecular weight PLA. The 25% GCV-loaded scleral implants composed of PLA-70000 and PLA-5000 with a blending ratio of 80/20 were implanted in pigmented rabbit eyes. The GCV concentrations in the vitreous after implantation of PLA-70000/PLA-5000 scleral implant with a blending ratio of 80/20 were maintained in the range of effective level for 6 months without a significant burst. Our results suggest that the blended implants are promising for the intraocular controlled drug delivery over a period of several months to one year to treat cytomegalovirus retinitis.

Formulation of poly(D,L-lactic-co-glycolic acid) microparticles for rapid plasmid DNA delivery

An optimised water-in-oil-in-water double emulsion process for the microencapsulation of plasmid DNA in poly(D,L-lactic-co-glycolic acid) (PLGA) was used to prepare microparticles from a range of different PLGA formulations. This process has been developed using pharmaceutically accepted solvents and is potentially scaleable. Incorporation of plasmid DNA in the microparticles of up to 11 microg/mg was obtained and the retention of plasmid DNA integrity was considerably greater than previously reported. Microparticle structure was determined, by scanning electron microscopy, to be hollow and size distribution characteristics were found to be independent of polymer formulation. The ability to vary the plasmid DNA release profile by changing the PLGA formulation and polymer concentration used in the encapsulation process was also demonstrated. This ability to control the release profile of the microparticles was shown to be especially important as the physical integrity of the encapsulated plasmid DNA was found to deteriorate with extended release times in vitro.

Local drug delivery

Intensive research efforts are now focused on the development of new strategies for more effective delivery of drugs to the central nervous system. These strategies include chemical modification of drugs, disruption of the blood-brain barrier, and utilization of alternative routes for drug delivery. This paper focuses on local drug delivery for the treatment of brain tumors. It reviews papers published in the past year on local chemotherapy and immunotherapy. Other aspects of local drug delivery are discussed, including convection-enhanced delivery and drug delivery via a controlled-release microchip.

Development of microspheres for neurological disorders: from basics to clinical applications

Drug delivery to the central nervous system remains a challenging area of investigation for both basic and clinical neuroscientists. Numerous drugs are generally excluded from blood to brain transfer due to the negligible permeability of the brain capillary endothelial wall, which makes up the blood brain barrier in vivo. For several years, we have explored the potential applications of the microencapsulation of therapeutic agents to provide local controlled drug release in the central nervous system. Due to their size, these microparticles can be easily implanted by stereotaxy in discreet, precise and functional areas of the brain without damaging the surrounding tissue. This type of implantation avoids the inconvenient insertion of large implants by open surgery and can be repeated if necessary. We have established the compatibility of poly(lactide-co-glycolide) microspheres with brain tissues. Presently, the most developed applications concern Neurology and Neuro-oncology, with local delivery of neurotrophic factors and antimitotic drugs into neurodegenerative lesions and brain tumours, respectively. The drugs that had been encapsulated by our group included nerve growth factor (NGF), 5-fluorouracil (5-FU), idoxuridine and BCNU. Preclinical studies have been performed with each drug. Studies with NGF are reported as an example. A phase I/II clinical trial has been carried out in patients with newly diagnosed glioblastomas to assess the potentialities of 5-FU-loaded microspheres when intracranially implanted.