Copolymers of 2-(dimethylamino)ethyl methacrylate with ethoxytriethylene glycol methacrylate or N-vinyl-pyrrolidone as gene transfer agents

How does the polymer architecture and position of cationic charges affect cell viability?

Polymer chemistry, composition and molar mass are factors that are known to affect cytotoxicity, however the influence of polymer architecture has not been investigated systematically. In this study the influence of the position of the cationic charges along the polymer chain on cytotoxicity was investigated while keeping constant the other polymer characteristics. Specifically, copolymers of various architectures, based on a cationic pH responsive monomer, 2-(dimethylamino)ethyl methacrylate (DMAEMA) and a non-ionic hydrophilic monomer, oligo(ethylene glycol)methyl ether methacrylate (OEGMA) were engineered and their toxicity towards a panel of cell lines investigated. Of the seven different polymer architectures examined, the block-like structures were less cytotoxic than statistical or gradient/tapered architectures. These findings will assist in developing future vectors for nucleic acid delivery.

Application of vinyl polymer-based materials as nucleic acids carriers in cancer therapy

Nucleic acid-based therapies have changed the paradigm of cancer treatment, where conventional treatment modalities still have several limitations in terms of efficacy and severe side effects. However, these biomolecules have a short half-life in vivo, requiring multiple administrations, resulting in severe suffering, discomfort, and poor patient compliance. In the early days of (nano)biotechnology, these problems caused concern in the medical community, but recently it has been recognized that these challenges can be overcome by developing innovative formulations. This review focuses on the use of vinyl polymer-based materials for the protection and delivery of nucleic acids in cancer. First, an overview of the properties of nucleic acids and their versatility as drugs is provided. Then, key information on the achievements to date, the most effective delivery methods, and the evaluation of functionalization approaches (stimulatory strategies) are critically discussed to highlight the importance of vinyl polymers in the new cancer treatment approaches. This article is categorized under: Nanotechnology Approaches to Biology > Nanoscale Systems in Biology Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease Biology-Inspired Nanomaterials > Nucleic Acid-Based Structures.

Harnessing subcellular-resolved organ distribution of cationic copolymer-functionalized fluorescent nanodiamonds for optimal delivery of active siRNA to a xenografted tumor in mice

Diamond nanoparticles (nanodiamonds) can transport active drugs in cultured cells as well as in vivo. However, in the latter case, methods allowing the determination of their bioavailability accurately are still lacking. A nanodiamond can be made fluorescent with a perfectly stable emission and a lifetime ten times longer than that of tissue autofluorescence. Taking advantage of these properties, we present an automated quantification method of fluorescent nanodiamonds (FND) in histological sections of mouse organs and tumors, after systemic injection. We use a home-made time-delayed fluorescence microscope comprising a custom pulsed laser source synchronized on the master clock of a gated intensified array detector. This setup allows ultra-high-resolution images (120 Mpixels in size) of whole mouse organ sections to be obtained, with subcellular resolution and single-particle sensitivity. As a proof-of-principle experiment, we quantified the biodistribution and aggregation state of new cationic FNDs capable of transporting small interfering RNA inhibiting the oncogene responsible for Ewing sarcoma. Image analysis showed a low yield of nanodiamonds in the tumor after intravenous injection. Thus, for the in vivo efficacy assay, we injected the nanomedicine into the tumor. We achieved a 28-fold inhibition of the oncogene. This method can readily be applied to other nanoemitters with ≈100 ns lifetime.

Star Polymers

Recent advances in controlled/living polymerization techniques and highly efficient coupling chemistries have enabled the facile synthesis of complex polymer architectures with controlled dimensions and functionality. As an example, star polymers consist of many linear polymers fused at a central point with a large number of chain end functionalities. Owing to this exclusive structure, star polymers exhibit some remarkable characteristics and properties unattainable by simple linear polymers. Hence, they constitute a unique class of technologically important nanomaterials that have been utilized or are currently under audition for many applications in life sciences and nanotechnologies. This article first provides a comprehensive summary of synthetic strategies towards star polymers, then reviews the latest developments in the synthesis and characterization methods of star macromolecules, and lastly outlines emerging applications and current commercial use of star-shaped polymers. The aim of this work is to promote star polymer research, generate new avenues of scientific investigation, and provide contemporary perspectives on chemical innovation that may expedite the commercialization of new star nanomaterials. We envision in the not-too-distant future star polymers will play an increasingly important role in materials science and nanotechnology in both academic and industrial settings.

Hydrophobically-associating cationic polymers as micro-bubble surface modifiers in dissolved air flotation for cyanobacteria cell separation

Dissolved air flotation (DAF), an effective treatment method for clarifying algae/cyanobacteria-laden water, is highly dependent on coagulation-flocculation. Treatment of algae can be problematic due to unpredictable coagulant demand during blooms. To eliminate the need for coagulation-flocculation, the use of commercial polymers or surfactants to alter bubble charge in DAF has shown potential, termed the PosiDAF process. When using surfactants, poor removal was obtained but good bubble adherence was observed. Conversely, when using polymers, effective cell removal was obtained, attributed to polymer bridging, but polymers did not adhere well to the bubble surface, resulting in a cationic clarified effluent that was indicative of high polymer concentrations. In order to combine the attributes of both polymers (bridging ability) and surfactants (hydrophobicity), in this study, a commercially-available cationic polymer, poly(dimethylaminoethyl methacrylate) (polyDMAEMA), was functionalised with hydrophobic pendant groups of various carbon chain lengths to improve adherence of polymer to a bubble surface. Its performance in PosiDAF was contrasted against commercially-available poly(diallyl dimethyl ammonium chloride) (polyDADMAC). All synthesised polymers used for bubble surface modification were found to produce positively charged bubbles. When applying these cationic micro-bubbles in PosiDAF, in the absence of coagulation-flocculation, cell removals in excess of 90% were obtained, reaching a maximum of 99% cell removal and thus demonstrating process viability. Of the synthesised polymers, the polymer containing the largest hydrophobic functionality resulted in highly anionic treated effluent, suggesting stronger adherence of polymers to bubble surfaces and reduced residual polymer concentrations.

Series of new β-cyclodextrin-cored starlike carriers for gene delivery

The development of safe and effective β-cyclodextrin (β-CD)-cored cationic star gene carriers has attracted considerable attention. In this work, a series of star-shaped hemocompatible CD-PGPP, CD-PGAEPP, and CD-PGAPP vectors composed of β-CD cores and piperazine (PP)-, N-(aminoethyl)piperazine (AEPP)-, or N-(3-aminopropyl)-2-pyrrolidinone (APP)-functionalized poly(glycidyl methacrylate) arms were successfully proposed and compared for highly efficient gene delivery. Such star carriers possess plentiful secondary amine, tertiary amine, and nonionic hydroxyl groups. CD-PGPP, CD-PGAEPP, and CD-PGAPP were effective in condensing plasmid DNA into nanoparticles, whose sizes were 100-200 nm and positive ζ potentials were 25-40 mV at nitrogen/phosphate (N/P) ratios of 10 and above. CD-PGPP, CD-PGAEPP, and CD-PGAPP showed significantly lower cytotoxicity than control poly(ethylenimine) (PEI; ∼25 kDa). At most N/P ratios, CD-PGAPP exhibited better gene transfection performance than CD-PGPP and CD-PGAEPP particularly in HepG2 cells. More importantly, in comparison with PEI, all of the CD-PGPP, CD-PGAEPP, and CD-PGAPP vectors did not cause undesirable hemolysis.

Polymeric theranostics: using polymer-based systems for simultaneous imaging and therapy

Polymer-based nanomedicine is a large and fast growing field. Polymer-based systems have been extensively used as therapeutic carriers as well as bioimaging agents for example in tumour diagnosis. However, fewer polymeric systems have been able to combine both therapy and imaging in a new field that is called theranostics (theragnostics). This review aims to summarise the recent developments and trends on polymeric theranostics. Four different types of therapies/treatments are examined namely drug delivery, gene delivery, photodynamic therapy and hyperthermia treatment combined with different imaging moieties like magnetic resonance imaging agents, fluorescent agents and microbubbles for ultrasound imaging.

Nanofibrillated cellulose composite hydrogel for the replacement of the nucleus pulposus

The swelling and compressive mechanical behavior as well as the morphology and biocompatibility of composite hydrogels based on Tween® 20 trimethacrylate (T3), N-vinyl-2-pyrrolidone (NVP) and nanofibrillated cellulose (NFC) were assessed in the present study. The chemical structure of T3 was verified by Fourier transform infrared spectroscopy and proton nuclear magnetic resonance, and the degree of substitution was found to be around 3. Swelling ratios of neat hydrogels composed of different concentrations of T3 and NVP were found to range from 1.5 to 5.7 with decreasing concentration of T3. Various concentrations of cellulose nanofibrils (0.2-1.6wt.%) were then used to produce composite hydrogels that showed lower swelling ratios than neat ones for a given T3 concentration. Neat and composite hydrogels exhibited a typical nonlinear response under compression. All composite hydrogels showed an increase in elastic modulus compared to neat hydrogel of about 3- to 8-fold, reaching 18kPa at 0% strain and 62kPa at 20% strain for the hydrogel with the highest NFC content. All hydrogels presented a porous and homogeneous structure, with interconnected pore cells of around 100nm in diameter. The hydrogels are biocompatible. The results of this study demonstrate that composite hydrogels reinforced with NFC may be viable as nucleus pulposus implants due to their adequate swelling ratio, which may restore the annulus fibrosus loading, and their increased mechanical properties, which could possibly restore the height of the intervertebral discs.

Dispersions based on noble metal nanoparticles-DNA conjugates

Many biomolecules have specific binding properties in the nanostructure formation; they are attractive materials for nanotechnology. One such promising construction material for growing a well-defined nanostructure is deoxyribonucleic acid, due to its π-electron hydrophobic core and predictable recognition attributed to the specificity of Watson-Crick base-pairing. Hydrogen bonding provides the specificity behind the matching of complementary pairs of single-stranded (ss) DNA to hybridize into a double strand (ds) of helical DNA. The double-helical structure of DNA is determined by a subtle balance of noncovalent interactions among the DNA building blocks. The most prominent role is played by the interactions between the DNA bases, where two binding motifs can be recognized: planar hydrogen bonding and vertical stacking. DNA-based nanotechnology has generated interest in a number of applications due to the specificity, programmability, and reproducibility of DNA interaction with noble metal nanoparticles. 5' and 3' thiol moieties are used to prepare composite DNAs, DNA-gold nanoparticle conjugates and nanostructures with a variety of nanoparticle-based DNA assays. Particularly, color changes induced by the association of nanometer-sized gold particles provide a basis of a simple yet highly selective method for detecting specific biological reactions between anchored ligand molecules and receptor molecules in the milieu. Colloidal noble metal nanoparticles, in particular, have found application in a variety of assay formats in which analyte binding is coupled to particle adsorption. The extreme sensitivity of the bandwidth, the peak height, and the position of the absorption (or scattering) maximum of surface plasmon resonance spectra to environmental changes have prompted the development of approaches directly monitor the DNA hybridization. The same features that make DNA an effective molecule for the storage of genetic information also render it useful as an engineering material for the construction of smart objects at the nanometer scale because of its ability to self organize into desired structures via the specific hybridization of complementary sequences. Biocompatibility between gold nanomaterials and biological scaffolding is crucial to the development of smart biomaterials. These DNA/metal colloids are interesting for their fundamental properties as well as for applications in nanomaterials science and nanobiotechnology.

Synthesis, swelling and drug-release behaviour of a poly(N,N-diethylacrylamide-co-(2-dimethylamino) ethyl methacrylate) hydrogel

In this study, poly(N,N-diethylacrylamide-co-(2-dimethylamino) ethyl methacrylate) (poly(DEA-co-DMAEMA)) hydrogels were synthesized by changing the initial DEA/DMAEMA mol ratio. The hydrogels were characterized by Fourier transform infrared (FT-IR) spectroscopy and scanning electron microscopy (SEM). In comparison with the PDEA hydrogel, the equilibrium swelling ratio (ESR) and lower critical solution temperature (LCST) of the hydrogels increase with the increase of DMAEMA content in the feed. The deswelling and reswelling kinetics and cytotoxicity of the different composition ratios of DEA to DMAEMA in the co-polymerized hydrogels were also investigated in detail. The absorption and release behaviour of the model drug, bovine serum albumin, were found to be dependent on hydrogel composition and environment temperature, which suggests that these materials have potential application as intelligent drug carriers.

Star-shaped cationic polymers by atom transfer radical polymerization from beta-cyclodextrin cores for nonviral gene delivery

Cationic polymers with low cytotoxicity and high transfection efficiency have attracted considerable attention as nonviral carriers for gene delivery. Herein, well-defined and star-shaped CDPD consisting of beta-CD cores and P(DMAEMA) arms, and CDPDPE consisting of CDPD and P(PEGEEMA) end blocks (where CD = cyclodextrin, P(DMAEMA) = poly(2-(dimethylamino)ethyl methacrylate), P(PEGEEMA) = poly(poly(ethylene glycol)ethyl ether methacrylate)) for gene delivery were prepared via atom transfer radical polymerization (ATRP) from the bromoisobutyryl-terminated beta-CD core. The CDPD and CDPDPE exhibit good ability to condense plasmid DNA (pDNA) into 100-200 nm size nanoparticles with positive zeta potentials of 25-40 mV at nitrogen/phosphate (N/P) ratios of 10 or higher. CDPD and CDPDPE exhibit much lower cytotoxicity and higher gene transfection efficiency than high molecular weight P(DMAEMA) homopolymers. A comparison of the transfection efficiencies between CDPD and P(DMAEMA) homopolymer indicates that the unique star-shaped architecture involving the CD core can enhance the gene transfection efficiency. In addition to reducing cytotoxicity, the introduction of a biocompatible P(PEGEEMA) end block to the P(DMAEMA) arms in CDPDPE can further enhance the gene transfection efficiency.

Complex coacervate core micelles

In this review we present an overview of the literature on the co-assembly of neutral-ionic block, graft, and random copolymers with oppositely charged species in aqueous solution. Oppositely charged species include synthetic (co)polymers of various architectures, biopolymers - such as proteins, enzymes and DNA - multivalent ions, metallic nanoparticles, low molecular weight surfactants, polyelectrolyte block copolymer micelles, metallo-supramolecular polymers, equilibrium polymers, etcetera. The resultant structures are termed complex coacervate core/polyion complex/block ionomer complex/interpolyelectrolyte complex micelles (or vesicles); i.e., in short C3Ms (or C3Vs) and PIC, BIC or IPEC micelles (and vesicles). Formation, structure, dynamics, properties, and function will be discussed. We focus on experimental work; theory and modelling will not be discussed. Recent developments in applications and micelles with heterogeneous coronas are emphasized.

Condensation of nonstochiometric DNA/polycation complexes by divalent cations

This study found that divalent cations induced the further condensation of partially condensed DNA within nonstochiometric polycation complexes. The addition of a few mmol of a divalent cation such as calcium reduced by half the inflection point at which DNA became fully condensed by poly-L-lysine (PLL) and a variety of other polycations. The effect on DNA condensation was initially observed using a new method, which is based on the concentration-dependent self-quenching of fluorescent moieties (e.g., rhodamine) covalently linked to the DNA backbone at relatively high densities. Additional analyses, which employed ultracentrifugation, dynamic light scattering, agarose gel electrophoresis, and atomic force microscopy, confirmed the effect of divalent cations. These results provide an additional accounting of the process by which divalent cations induce greater chromatin compaction that is based on the representation of chromatin fibers as a nonstoichiometric polyelectrolyte complex. They also offer a new approach to assemble nonviral vectors for gene therapy.

Shell-Cross-Linked Micelles Containing Cationic Polymers Synthesized via the RAFT Process: Toward a More Biocompatible Gene Delivery System

Block copolymers poly(2-(dimethylamino) ethyl methacrylate)-b-poly(polyethylene glycol methacrylate) (PDMAEMA-b-P(PEGMA)) were prepared via reversible addition fragmentation chain transfer polymerization (RAFT). The polymerization was found to proceed with the expected living behavior resulting in block copolymers with varying block sizes of low polydispersity (PDI <1.3). The resulting block copolymer was self-assembled in an aqueous environment, leading to the formation of pH-responsive micelles. Further stabilization of the micellar system was performed in water using ethylene glycol dimethacrylate and the RAFT process to cross-link the shell. The cross-linked micelle was found to have properties significantly different from those of the uncross-linked block copolymer micelle. While a distinct critical micelle concentration (CMC) was observed using block copolymers, the CMC was absent in the cross-linked system. In addition, a better stability against disintegration was observed when altering the ionic strength such as the absence of changes of the hydrodynamic diameter with increasing NaCl concentration. Both cross-linked and uncross-linked micelles displayed good binding ability for genes. However, the cross-linked system exhibited a slightly superior tendency to bind oligonucleotides. Cytotoxicity tests confirmed a significant improvement of the biocompatibility of the synthesized cross-linked micelle compared to that of the highly toxic PDMAEMA. The cross-linked micelles were taken up by cells without causing any signs of cell damage, while the PDMAEMA homopolymer clearly led to cell death.

Investigation of in vitro biocompatibility of novel pentablock copolymers for gene delivery

Novel pentablock copolymers of poly(diethylaminoethylmethacrylate) (PDEAEM), poly(ethylene oxide) (PEO), and poly(propylene oxide) (PPO), (PDEAEM-b-PEO-b-PPO-b-PEO-b-PDEAEM), were synthesized as vectors for gene delivery, and were tested for their biocompatibility on SKOV3 (human ovarian carcinoma) and A431 (human epidermoid cancer) cell lines under different in vitro conditions using various assays to elucidate the mechanism of cell death. These copolymers form micelles in aqueous solutions and can be tuned for their cytotoxicity by tailoring the weight percentage of their cationic component, PDEAEM. Copolymers with higher PDEAEM content were found to be more cytotoxic, though their polyplexes were less toxic than the polycations alone. Pentablock copolymers displayed higher cell viability than commercially available ExGen 500 at similar N:P ratios. While cell death with ExGen was found to be accompanied by an early loss of cell membrane integrity, pentablock copolymers caused very little membrane leakage. Caspase-3/7 assay confirmed that none of these polymers induced apoptosis in the cells. These pentablock copolymers form thermo-reversible gels at physiological temperatures, thereby enabling controlled gene delivery. Toxicity of the polymer gels was tested using an agarose-matrix, simulating an in vivo tumor model where injected polyplex gels would dissolve to release polyplexes, diffusing through tumor mass to reach the target cells. Twenty five weight percent of copolymer gels were found to be nontoxic or mildly cytotoxic after 24 h incubation. Transfection efficiency of the copolymers was found to be critically correlated to cytotoxicity and depended on DNA dose, polymer concentration, and N:P ratios. Transgene expression obtained was comparable to that of ExGen, but ExGen exhibited greater cell death.

Adsorption of drugs onto a pH responsive poly(N,N-dimethyl aminoethyl methacrylate) grafted anion-exchange membrane in vitro

The influence of charge and lipophilicity of acidic and basic model drugs on their adsorption onto poly(N,N-dimethyl aminoethyl methacrylic acid) grafted poly(vinylidene fluoride) (DMAEMA-PVDF) membranes was evaluated. The effect of serum proteins (albumin, IgG) and hormones (cortisol, free thyroxine (T(4)F) and thyrotropin (TSH)) on drug adsorption was also studied. Acidic model drugs (antiepileptics and benzodiazepies) adsorbed to a greater extent onto the membrane from Hepes buffer at ionic strength of 25mM and pH 7.0 than basic drugs (antidepressants) did. Adsorption of acidic model drugs was based on electrostatic interactions between positively charged tertiary amino groups of DMAEMA side-chain and acidic negatively charged drug. Albumin diminished the adsorption of drugs from serum onto the membrane. Lipophilicity was related to the adsorption of acidic model drugs from serum onto the membrane. The degree of grafting had the greatest effect on adsorption of lipophilic drugs, but no influence was observed on adsorption of hydrophilic drugs. The present results showed that acidic drugs and albumin adsorbed onto the membrane, which suggests that the PVDF-DMAEMA membrane may be suitable for separating acidic drugs from protein-free substances for subsequent monitoring and evaluation.

Synthesis, Characterization, and Evaluation as Transfection Reagents of Double-Hydrophilic Star Copolymers: Effect of Star Architecture

Five star polymers of the ionizable hydrophilic 2-(dimethylamino)ethyl methacrylate (DMAEMA) and the nonionic hydrophilic methoxy hexa(ethylene glycol) methacrylate (HEGMA) were prepared by group transfer polymerization (GTP) using ethylene glycol dimethacrylate (EGDMA) as coupling agent. In particular, four isomeric star copolymers, one heteroarm, two star block and one statistical star, with 90% mol DMAEMA and 10% mol HEGMA, plus one star homopolymer of DMAEMA with degrees of polymerization of the arms equal to 20 were synthesized. The polymers were characterized in terms of their molar masses (MMs) and compositions using gel permeation chromatography (GPC) and proton nuclear magnetic resonance (1H NMR) spectroscopy, respectively. The hydrodynamic diameters in water indicated some aggregation for all the star polymers except for the statistical copolymer star, while the pK values of the DMAEMA units were around 7 for all star polymers. All the star polymers were evaluated for their ability to transfect human cervical HeLa cancer cells with the modified plasmid pRLSV40 bearing the enhanced green fluorescent protein (EGFP) as the reporter gene. All four star copolymers showed decreased toxicity compared to that of the DMAEMA star homopolymer for the same amounts of star polymer tested. The star block copolymer with outer DMAEMA blocks exhibited the highest overall transfection efficiency, 11%, compared to that of all the star polymers examined in this study. This efficiency was the same as that of the commercially available transfection reagent SuperFect.

Water-Soluble Nanoparticles from Random Copolymer and Oppositely Charged Surfactant, 3

In this report, we investigate the nanoparticle formation between random copolymers (RCPs) of methoxy-poly(ethylene glycol) monomethacrylate (MePEGMA) and (3-(methacryloylamino)propyl)trimethylammonium chloride (MAPTAC) and oppositely charged natural surfactants, sodium oleate and sodium laurate, using turbidimetric titration, steady-state fluorescence, dynamic light scattering, and electron microscopy. Though sodium oleate and sodium laurate are sparingly soluble in water, the nanoparticle complexes formed between the RCPs and these surfactants are soluble in the entire range of compositions studied here, including the stoichiometric electronetural complexes. The spherical nature of these nanoparticle complexes is revealed by electron microscopic (EM) analysis. Dynamic light scattering (DLS) showed that the average diameters of the nanoparticles are in the range 50 to 150 nm, which is supported by EM analysis. Pyrene fluorescence experiments suggested that these soluble nanoparticles have hydrophobic cores, which may solubilize hydrophobic drug molecules. The polarity index (I(1)/I(3)) obtained from the pyrene fluorescence spectra and the conductometric measurements showed that the critical concentration of fatty acid salts needed to obtain nanoparticles are in the order of 10(-4) M. Further, the complexation of such poorly water-soluble amphiphilic surfactants with polymers offers a useful method for the immobilization of hydrophobic compounds towards water-soluble drug carrier formulations. The formation of water-soluble nanoparticles by the self-assembly of fatty acid salts upon interacting with oppositely charged poly(ethylene glycol)-based polyions.

PEG shielded polymeric double-layered micelles for gene delivery

A combination of A-B and B-C block copolymers was used to encapsulate DNA inside pEG coated particles, where A is a cationic block (poly(dimethylaminoethyl methacrylate), pDMAEMA) for DNA binding and condensation, B is a hydrophobic block (poly(butylmethacrylate), pBMA) and C is a polyethylene glycol (pEG) block. The AB and BC block copolymers were synthesized by transition metal mediated radical polymerization. The AB block copolymer had a fixed pBMA molecular weight of 3800 g/mol and a varying pDMAEMA molecular weight (from 22 to 65 kg/mol), the BC block copolymer had a fixed composition (pBMA 9000 g/mol; pEG 2000 g/mol). Plasmid DNA containing particles were made via a detergent dialysis method. By this method, particles of approximately 120 nm, as determined by dynamic light scattering (DLS), with a near neutral charge were formed, independent of the DMAEMA block size. DLS measurements and gel electrophoresis indicated that the particles were very stable in cell culture medium at 37 degrees C and resistant to anionic exchange by poly-l-aspartic acid. The particles were able to transfect COS-7 and OVCAR-3 cells with minor toxicity if incubated for 1 or 4 h; incubation for 24 h resulted in an increased toxicity. This paper shows that small polyplexes with near neutral charge can be obtained via a convenient detergent dialysis method using pDMAEMA-b-pBMA and pBMA-b-pEG. These particles may be interesting for in vivo experiments where particles with high positive charges have adverse interactions with blood components.

Poly(3-guanidinopropyl methacrylate): a novel cationic polymer for gene delivery

A cationic polymethacrylate with a guanidinium side group was designed in order to create a polymer with cell membrane-penetrating properties such as Tat or other arginine-rich peptides. The polymer, poly(3-guanidinopropyl methacrylate), abbreviated as pGuaMA, was synthesized by free radical polymerization. The DNA-condensing properties of pGuaMA (Mw 180 kDa) were investigated via dynamic light scattering and zeta potential measurements, and small, positively charged particles (110 nm, +37 mV) were found. It was shown that polyplexes based on pGuaMA were able to transfect COS-7 cells efficiently in the absence of serum, while under the same conditions poly(arginine) (pArg) polyplexes did not show detectable transfection levels. Addition of a membrane-disrupting peptide, INF 7, derived from the influenza virus, to preformed pGuaMA polyplexes did result in approximately 2 times increased transfection levels. DLS, zeta potential measurements, gel electrophoresis, and ethidium bromide displacement measurements indicated that serum induced aggregation of the polyplexes at high polymer/plasmid ratios, while at low polymer/plasmid ratios the polarity of the polyplexes reversed likely due to adsorption of negatively charged proteins on their surface. Likely, the unfavorable interactions of pGuaMA polyplexes with serum proteins is the reason for the absent transfection activity of these polyplexes in the presence of serum. Confocal laser scanning microscopy indicated cellular internalization via endocytosis of both polyplexes and free polymer. Thus, pGuaMA polyplexes enter cells, as reported for other polyplexes, by endocytosis and not, as hypothesized, via direct membrane passage.

Novel cationic pentablock copolymers as non-viral vectors for gene therapy

New cationic pentablock copolymers of poly(diethylaminoethylmethacrylate) (PDEAEM), poly(ethylene oxide) (PEO) and poly(propylene oxide) (PPO)--PDEAEM-b-PEO-b-PPO-b-PEO-b-PDEAEM--synthesized in our laboratory were investigated for their potential as non-viral vectors for gene therapy. Agarose gel studies showed that the copolymers effectively condensed plasmid DNA to form polyplexes, and also protected plasmids against nuclease degradation. Light scattering and transmission electron microscopy were used to analyze the apparent size, molecular weight and morphology of these polyplexes. Lactate dehydrogenase assay was employed to find the cytotoxicity limits of the polymers and polyplexes on a human ovarian cancer cell line. The polymers showed much less cytotoxicity than commercially available ExGen 500 (linear polyethyleneimine). By changing the relative lengths of the blocks in the copolymers, it was found that the cytotoxicity of these copolymers could be tailored. The micellar structures of these copolymers in aqueous solutions and their pH-sensitive protonation were added advantages. In vitro transfection efficiencies of the polymers using green fluorescent protein (pEGFP-N1) and luciferase (pRL-CMV) reporter genes were found comparable to ExGen 500. Besides, aqueous solutions of these pentablock copolymers have been shown to exhibit thermodynamic phase transitions and thermoreversible gelation, a quality that could allow subcutaneous/intramuscular injections of these polymers for controlled gene delivery over time.

Water-soluble complexes from random copolymer and oppositely charged surfactant. 2. Complexes of poly(ethylene glycol)-based cationic random copolymer and bile salts

The complexes formed between the positively charged random copolymers (RCPs) of methoxy-poly(ethylene glycol) monomethacrylate (MePEGMA) and (3-(methacryloylamino)propyl)trimethylammonium chloride (MAPTAC) with oppositely charged biosurfactants (bile salts) were studied using turbidimetric titration, steady-state fluorescence, dynamic light scattering, and electron microscopy. Studies showed that the complexes of the RCPs of MAPTAC and MePEGMA with less than 68 mol % of PEG content precipitate in water, whereas the complexes of the copolymer with 89 and 94 mol % of PEG content do not precipitate in the entire range of composition of the mixture including stoichiometric compositions when the electroneutral complexes are formed. The complexes with true hydrophobic domains, which are a prerequisite characteristic to serve as a carrier, can be obtained at much lower concentration than the critical micelle concentration of the corresponding surfactant. For a particular surfactant, hydrophobic domains are obtained at lower Z-/+ for the random copolymer with lower PEG content. The hydrodynamic radii of these complexes vary over a range of 20-35 nm. Overall results reveal that these complexes are qualitatively similar to the polyion complex micelles or block ionomer complexes obtained from the block copolymers and oppositely charged surfactants. As the surfactants used in this study are biocompatible, we hope that these soluble particles will be promising vectors in the field of drug delivery.