Peptide drug delivery: Colonic and rectal absorption

Lipid-Based Nanoparticles as Oral Drug Delivery Systems: Overcoming Poor Gastrointestinal Absorption and Enhancing Bioavailability of Peptide and Protein Therapeutics

Delivery and formulation of oral peptide and protein therapeutics have always been a challenge for the pharmaceutical industry. The oral bioavailability of peptide and protein therapeutics mainly relies on their gastrointestinal solubility and permeability which are affected by their poor membrane penetration, high molecular weight and proteolytic (chemical and enzymatic) degradation resulting in limited delivery and therapeutic efficacy. The present review article highlights the challenges and limitations of oral delivery of peptide and protein therapeutics focusing on the application, potential and importance of solid lipid nanoparticles (SLNs) and nanostructured lipid carriers (NLCs) as lipid-based drug delivery systems (LBDDSs) and their advantages and drawbacks. LBDDSs, due to their lipid-based matrix can encapsulate both lipophilic and hydrophilic drugs, and by reducing the first-pass effect and avoiding proteolytic degradation offer improved drug stability, dissolution rate, absorption, bioavailability and controlled drug release. Furthermore, their small size, high surface area and surface modification increase their mucosal adhesion, tissue-targeted distribution, physiological function and half-life. Properties such as simple preparation, high-scale manufacturing, biodegradability, biocompatibility, prolonged half-life, lower toxicity, lower adverse effects, lipid-based structure, higher drug encapsulation rate and various drug release profile compared to other similar carrier systems makes LBDDSs a promising drug delivery system (DDS). Nevertheless, undesired physicochemical features of peptide and protein drug development and discovery such as plasma stability, membrane permeability and circulation half-life remain a serious challenge which should be addressed in future.

Self-assembled block copolymer biomaterials for oral delivery of protein therapeutics

Protein therapeutics have guided a transformation in disease treatment for various clinical conditions. They have been successful in numerous applications, but administration of protein therapeutics has been limited to parenteral routes which can decrease patient compliance as they are invasive and painful. In recent years, the synergistic relationship of novel biomaterials with modern protein therapeutics has been crucial in the treatment of diseases that were once thought of as incurable. This has guided the development of a variety of alternative administration routes, but the oral delivery of therapeutics remains one of the most desirable due to its ease of administration. This review addresses important aspects of micellar structures prepared by self-assembled processes with applications for oral delivery. These two characteristics have not been placed together in previous literature within the field. Therefore, we describe the barriers for delivery of protein therapeutics, and we concentrate in the oral/transmucosal pathway where drug carriers must overcome several chemical, physical, and biological barriers to achieve a successful therapeutic effect. We critically discuss recent research on biomaterials systems for delivering such therapeutics with an emphasis on self-assembled synthetic block copolymers. Polymerization methods and nanoparticle preparation techniques are similarly analyzed as well as relevant work in this area. Based on our own and others' research, we analyze the use of block copolymers as therapeutic carriers and their promise in treating a variety of diseases, with emphasis on self-assembled micelles for the next generation of oral protein therapeutic systems.

Nanomedicine based potentially transformative strategies for colon targeting of peptides: State-of-the-art

Recently, peptides have attracted tremendous attention among researchers attributed to their high target specificity and efficacy compared to conventional therapeutics. The ease of self-administration and non-invasiveness confers oral as the most desirable route. However, numerous challenges associated with peptide delivery through the oral route like harsh gastrointestinal environment, enzymatic degradation, and absorption barriers hinder its clinical translation. Protease activity is more pronounced in the proximal segments of the gastrointestinal tract (GIT). Distal segments like the colon possess lower proteolytic activity, enhanced retention time, etc. which could facilitate easy absorption. However, traversing of the upper segments to reach the colon requires the circumvention of the pitfalls of the GIT. The advent of nanomedicine strategies could help in overcoming the said challenges associated with oral delivery, colon-specific targeting, and improving stability and bioavailability at the active site. Furthermore, the classification of peptides and various nanomedicine strategies for oral delivery of peptides to the colon has been conveyed. Regulatory hurdles and ways to accomplish clinical translation have been addressed.

Targeted delivery of capecitabine to colon cancer cells using nano polymeric micelles based on beta cyclodextrin

Nano polymeric micelles (nano PMs) help to increase accessibility to tumor sites, decrease side effects and allow controlled drug dissemination over a long period of time. The aim of this study was to optimize the delivery of the anticancer drug capecitabine (CAP) using nano PMs and cyclodextrin (CD) to allow the treatment of colon cancer. A pH-responsive copolymer was prepared and the variables of loading time, loading temperature, the amount of copolymer and also the ratio of acrylic/maleic copolymer to beta CD and the effect that these variables have on drug loading were investigated, with variable optimization studies carried out following a definitive screening design (DSD). The morphology and structure of the particles were determined by scanning electron microscopy (SEM) and Fourier-transform infrared (FTIR) spectroscopy. In vitro drug release exemplified that the micelles were pH-sensitive, this action was shown that firstly the drug release was done perfectly targeted and under control and secondly the drug has been released above 80% inside the colon.

Nano polymeric micelles (nano PMs) help to increase accessibility to tumor sites, decrease side effects and allow controlled drug dissemination over a long period of time.

Potential in vivo delivery routes of postbiotics

Bioactive micro- and macro-molecules (postbiotics) derived from gut beneficial microbes are among natural chemical compounds with medical significance. Currently, a unique therapeutic strategy has been developed with an emphasis on the small molecular weight biomolecules that are made by the microbiome, which endow the host with several physiological health benefits. A large number of postbiotics have been characterized, which due to their unique pharmacokinetic properties in terms of controllable aspects of the dosage and various delivery routes, could be employed as promising medical tools since they exert both prevention and treatment strategies in the host. Nevertheless, there are still main challenges for the in vivo delivery of postbiotics. Currently, scientific literature confirms that targeted delivery systems based on nanoparticles, due to their appealing properties in terms of high biocompatibility, biodegradability, low toxicity, and significant capability to carry both hydrophobic and hydrophilic postbiotics, can be used as a novel and safe strategy for targeted delivery or/and release of postbiotics in various (oral, intradermal, and intravenous) in vivo models. The in vivo delivery of postbiotics are in their emerging phase and require massive investigation and randomized double-blind clinical trials if they are to be applied extensively as treatment strategies. This manuscript provides an overview of the various postbiotic metabolites derived from the gut beneficial microbes, their potential therapeutic activities, and recent progressions in the drug delivery field, as well as concisely giving an insight on the main in vivo delivery routes of postbiotics.

A dual pH and microbiota-triggered coating (Phloral™) for fail-safe colonic drug release

Enteric-coated dosage forms are widely used for targeting the ileo-colonic region of the gastrointestinal (GI) tract. However, accurate targeting is challenging due to intra- and inter-individual variability in intestinal paramaters such as fluid pH and transit times, which occasionally lead to enteric coating failure. As such, a unique coating technology (Phloral™), which combines two independent release mechanisms - a pH trigger (Eudragit® S; dissolving at pH 7) and a microbiota-trigger (resistant starch), has been developed, offering a fail-safe approach to colonic targeting. Here, we demonstrate that the inclusion of resistant starch in the coating does not affect the pH mediated drug release mechanism or the robustness of the coating in the upper GI tract. In order to make the resistant starch more digestible by bacterial enzymes, heat treatment of the starch in the presence of butanol was required to allow disruption of the crystalline structure of the starch granules. Under challenging conditions of limited exposure to high pH in the distal small intestine fluid and rapid transit through the colon, often observed in patients with inflammatory bowel disease, particularly in ulcerative colitis, this dual-trigger pH-enzymatic coating offers a revolutionary approach for site specific drug delivery to the large intestine.

OPTICORE™, an innovative and accurate colonic targeting technology

Inflammatory bowel disease (IBD) is a debilitating condition, estimated to affect 7 million people worldwide. Current IBD treatment strategies are substandard, relying on colonic targeting using the pH gradient along the gastrointestinal tract. Here, we describe an innovative colonic targeting concept, OPTICORE™ coating technology. OPTICORE™ combines two release triggers (pH and enzyme: Phloral™) in the outer layer, with an inner layer promoting a release acceleration mechanism (Duocoat™). The technology comprises an inner layer of partially neutralized enteric polymer with a buffer agent and an outer layer of a mixture of Eudragit® S and resistant starch. 5-aminosalicylic acid (5-ASA) tablets were coated with different inner layers, where the type of polymer, buffer salt concentration and pH of neutralization, were investigated for drug release acceleration. Buffer capacity of polymethacrylate neutralized polymer significantly contributes to the buffer capacity of the inner layer formulation, while buffer salt concentration is a major contributor to dispersion buffer capacity in the case of hypromellose enteric polymer formulations. An interplay between buffer capacity, pH and ionic strength contributes to an accelerated drug release. Resistant starch does not impact the enteric properties but allows for drug release mediated by colonic bacterial enzymes, ensuring complete drug release. Therefore, OPTICORE™ technology is designed to offer significant advantages over standard enteric coatings, particularly allowing for more accurate colonic drug delivery in ulcerative colitis patients.

Exploring Different Strategies for Efficient Delivery of Colorectal Cancer Therapy

Colorectal cancer (CRC) is the third most common cancer and the fourth leading cause of cancer death in the world. Currently available chemotherapy of CRC usually delivers the drug to both normal as well as cancerous tissues, thus leading to numerous undesirable effects. Much emphasis is being laid on the development of effective drug delivery systems for achieving selective delivery of the active moiety at the anticipated site of action with minimized unwanted side effects. Researchers have employed various techniques (dependent on pH, time, pressure and/or bacteria) for targeting drugs directly to the colonic region. On the other hand, systemic drug delivery strategies to specific molecular targets (such as FGFR, EGFR, CD44, EpCAM, CA IX, PPARγ and COX-2) overexpressed by cancerous cells have also been shown to be effective. This review aims to put forth an overview of drug delivery technologies that have been, and may be developed, for the treatment of CRC.

Administration strategies for proteins and peptides

Proteins are a vital constituent of the body as they perform many of its major physiological and biological processes. Recently, proteins and peptides have attracted much attention as potential treatments for various dangerous and traditionally incurable diseases such as cancer, AIDS, dwarfism and autoimmune disorders. Furthermore, proteins could be used for diagnostics. At present, most therapeutic proteins are administered via parenteral routes that have many drawbacks, for example, they are painful, expensive and may cause toxicity. Finding more effective, easier and safer alternative routes for administering proteins and peptides is the key to therapeutic and commercial success. In this context, much research has been focused on non-invasive routes such as nasal, pulmonary, oral, ocular, and rectal for administering proteins and peptides. Unfortunately, the widespread use of proteins and peptides as drugs is still faced by many obstacles such as low bioavailability, short half-life in the blood stream, in vivo instability and numerous other problems. In order to overcome these hurdled and improve protein/peptide drug efficacy, various strategies have been developed such as permeability enhancement, enzyme inhibition, protein structure modification and protection by encapsulation. This review provides a detailed description of all the previous points in order to highlight the importance and potential of proteins and peptides as drugs.

Strategies for enhanced peptide and protein delivery

Recent advances in the fields of molecular biology and biotechnology have allowed for the large-scale production and subsequent exploitation of the therapeutic potential of protein- and peptide-based drugs. The facilitation of delivery of this class of drugs must be tailored to meet the requirements and often the limitations dictated by the route of delivery chosen. The aim of this review is to comprehensively discuss several routes of drug delivery, detailing the uses and exploitation of each, from origins to present day approaches. Specific reference is made to the compatibility or incompatibility of each approach in the facilitation of the delivery of drugs of protein origin. Additionally, the physiological nature of the delivery route and the inherent physiological obstacles that must be considered when determining the most suitable approach to drug design and delivery enhancement are also addressed. Examples of novel protein-based drug designs and delivery methodologies that illustrate such enhancement strategies are explored.

Oral colon delivery of insulin with the aid of functional adjuvants

Oral colon delivery is currently considered of importance not only for the treatment of local pathologies, such as primarily inflammatory bowel disease (IBD), but also as a means of accomplishing systemic therapeutic goals. Although the large bowel fails to be ideally suited for absorption processes, it may indeed offer a number of advantages over the small intestine, including a long transit time, lower levels of peptidases and higher responsiveness to permeation enhancers. Accordingly, it has been under extensive investigation as a possible strategy to improve the oral bioavailability of peptide and protein drugs. Because of a strong underlying rationale, most of these studies have focused on insulin. In the present review, the impact of key anatomical and physiological characteristics of the colon on its viability as a protein release site is discussed. Moreover, the main formulation approaches to oral colon targeting are outlined along with the design features and performance of insulin-based devices.

Peptides: important tools for the treatment of central nervous system disorders

This review shows some classical applications of peptides and suggests there is great promise for the treatment of various central nervous system diseases. Actually, peptides are considered the new generation of biologically active tools because they are key regulators in cellular and intercellular physiological responses, which possess enormous potential for the treatment of various diseases. In spite of their clinical potential, native peptides have seen limited use due to their poor bioavailability and low stability in physiological conditions. Moreover, most peptide or protein pharmaceuticals currently in use are delivered by invasive routes such as via subcutaneous injection. Considerable efforts have been made to design new drugs based on peptides and recent developments in technology and science have provided the means and opportunity to produce a stable as well as controlled-release form of peptide and protein drugs to combat poorly controlled diseases and to increase patients' quality of life. A major challenge in this regard, however, is the delivery of peptides over the blood-brain barrier. This review gives an overview of some strategies used to improve both bioavailability and uptake of peptide drugs for delivery into the brain. Indeed, recent findings suggest that the use of peptides by conjugation to a polymer such as nanoparticles can offer tremendous hope in the treatment of brain disorders. The polymer conjugation improves pharmacokinetics by increasing the molecular mass of proteins and peptides and shielding them from proteolytic enzymes. These new strategies will create new opportunities for the future development of neurotherapeutic drugs. In the present review we have focused our attention on the peptide controlled delivery, summarizing literature reports on the use of peptides and nanotechnology for the treatment and diagnosis of brain disorders.

Enhanced transbuccal salmon calcitonin (sCT) delivery: effect of chemical enhancers and electrical assistance on in vitro sCT buccal permeation

This study investigates the combined effect of absorption enhancers and electrical assistance on transbuccal salmon calcitonin (sCT) delivery, using fresh swine buccal tissue. We placed 200 IU (40 μg/mL) of each sCT formulation--containing various concentrations of ethanol, N-acetyl-L-cysteine (NAC), and sodium deoxyglycocholate (SDGC)--onto the donor part of a Franz diffusion cell. Then, 0.5 mA/cm(2) of fixed anodal current was applied alone or combined with chemical enhancers. The amount of permeated sCT was analyzed using an ELISA kit, and biophysical changes of the buccal mucosa were investigated using FT-IR spectroscopy, and hematoxylin-eosin staining methods were used to evaluate histological alteration of the buccal tissues. The flux (J(s)) of sCT increased with the addition of absorption enhancer groups, but it was significantly enhanced by the application of anodal iontophoresis (ITP). FT-IR study revealed that all groups caused an increase in lipid fluidity but only the groups containing SDGC showed statistically significant difference. Although the histological data of SDGC groups showed a possibility for tissue damage, the present enhancing methods appear to be safe. In conclusion, the combination of absorption enhancers and electrical assistance is a potential strategy for the enhancement of transbuccal sCT delivery.

Nasal and rectal delivery of insulin with chitosan and N-trimethyl chitosan chloride

The aim of this study was to evaluate the ability of TMC, with different degrees of quaternization, to increase insulin absorption in vivo following nasal and rectal administration in rats. Two batches of TMC with different degrees of quaternization (TMC-L, 12.3% quaternized and TMC-H, 61.2% quaternized) and chitosan hydrochloride were administered intranasally (0.25 and 0.5% w/v) and rectally (0.5% w/v) with insulin (4 IU/kg body weight), at a pH of 4.40 and 7.40, in rats. Blood samples were taken over a period of 2 h for measurement of blood glucose levels and plasma insulin levels. Local toxicity evaluation was done by histological examination of the nasal and rectal epithelia. At pH 4.40 all these polymers were able to increase nasal and rectal insulin absorption, compared to the control groups. However, at a pH of 7.40, only TMC-H was able to increase the nasal and rectal absorption of insulin. These results relate to the insolubility of chitosan hydrochloride at neutral pH values, while the charge density of TMC-L is still too low for any significant interaction at pH 7.40. Histological evaluation of the nasal and rectal eptihelia shows no changes in the morphology of the cells after exposure to these polymers. Only slight congestion of the nasal submucosa was observed and all these polymers led to a mild increase in mucus secretion at pH 4.40. Highly quaternized TMC proves to be a potent absorption enhancer in vivo, especially at neutral pH values where chitosan salts are ineffective.

Development and in-vivo evaluation of insulin-loaded chitosan phthalate microspheres for oral delivery

Novel chitosan phthalate microspheres containing insulin were prepared by emulsion cross-linking technique. The feasibility of these microspheres as oral insulin delivery carriers was evaluated. The pH-responsive release behaviour of insulin from microspheres was analysed. The ability of chitosan phthalate-insulin microspheres to enhance intestinal absorption and improve the relative pharmacological availability of insulin was investigated by monitoring the plasma glucose and insulin level of streptozotocin-induced diabetic rats after oral administration of microspheres at insulin dose of 20 IU kg−1. In simulated gastric fluid (pH 2.0), insulin release from the microspheres was very slow. However, as the pH of the medium was changed to simulated intestinal fluid (pH 7.4), a rapid release of insulin occurred. The relative pharmacological efficacy for chitosan phthalate microspheres (18.66 ± 3.84%) was almost four-fold higher than the efficacy of the chitosan phthalate-insulin solution administration (4.08 ± 1.52%). Chitosan phthalate microspheres sustained the plasma glucose at pre-diabetic level for at least 16 h. These findings suggest that the microsphere is a promising carrier as oral insulin delivery system.

Safety and efficacy of sodium caprate in promoting oral drug absorption: from in vitro to the clinic

A major challenge in oral drug delivery is the development of novel dosage forms to promote absorption of poorly permeable drugs across the intestinal epithelium. To date, no absorption promoter has been approved in a formulation specifically designed for oral delivery of Class III molecules. Promoters that are designated safe for human consumption have been licensed for use in a recently approved buccal insulin spray delivery system and also for many years as part of an ampicillin rectal suppository. Unlike buccal and rectal delivery, oral formulations containing absorption promoters have the additional technical hurdle whereby the promoter and payload must be co-released in high concentrations at the small intestinal epithelium in order to generate significant but rapidly reversible increases in permeability. An advanced promoter in the clinic is the medium chain fatty acid (MCFA), sodium caprate (C(10)), a compound already approved as a food additive. We discuss how it has evolved to a matrix tablet format suitable for administration to humans under the headings of mechanism of action at the cellular and tissue level as well as in vitro and in vivo efficacy and safety studies. In specific clinical examples, we review how C(10)-based formulations are being tested for oral delivery of bisphosphonates using Gastro Intestinal Permeation Enhancement Technology, GIPET (Merrion Pharmaceuticals, Ireland) and in a related solid dose format for antisense oligonucleotides (ISIS Pharmaceuticals, USA).

Chitosan Phthalate Microspheres for Oral Delivery of Insulin: Preparation, Characterization, andIn VitroEvaluation

Chitosan phthalate polymer was synthesized and its microspheres were prepared by emulsion phase separation technique. The characterization of microspheres was determined by means of FTIR spectroscopy, electron microscopy, particle size, and zeta potential. The insulin was loaded to the microspheres by passive absorption technique. The peptic and tryptic enzymes degradation of insulin in microspheres was investigated. The in vitro release behavior of the microspheres was investigated under different pH conditions (pH 2.0 and pH 7.4). The degree of phthalate substitution in the synthesized polymer was 20%. The prepared microspheres were spherical with an average diameter 46.34 micro m. The insulin-loading capacity was 62%. Chitosan phthalate microspheres protect the insulin from gastric enzymes degradation that may enhance the oral stability of insulin. The encapsulated insulin was quickly released in a phosphate buffer saline (pH 7.4), whereas a small amount of insulin was released under acidic condition (0.1N HCl; pH 2.0) because under acidic conditions, carboxylic groups present in the system exist in nonionized form and are poorly hydrophilic. However, in alkaline conditions, it exists in ionized form and is considerably hydrophilic. The results suggest that chitosan phthalate microspheres may be used as a potential carrier for oral insulin delivery.

A new concept in colonic drug targeting: a combined pH-responsive and bacterially-triggered drug delivery technology

BACKGROUND

Current approaches to colonic drug delivery exploit one of two main physiological characteristics: the pH change or increase in bacterial numbers along the gastrointestinal tract. Here, we describe a new concept in targeted delivery, which combines these triggers to improve colonic delivery.

AIM

To assess the in-vivo targeting performance of a novel colonic delivery coating comprising a mixture of pH-responsive enteric polymer (Eudragit S) and biodegradable polysaccharide (resistant starch) in a single layer matrix film.

METHODS

Tablets (radio-labelled) were film-coated with the dual-mechanism coating and administered in a three-way crossover study to eight healthy volunteers (i) without food, (ii) with breakfast or (iii) 30 min before breakfast. The site of intestinal disintegration was assessed using gamma scintigraphy.

RESULTS

The coated tablets were able to resist breakdown in the stomach and small intestine. Consistent disintegration of the dosage form was seen at the ileocaecal junction/large intestine. The site of disintegration remained unaffected by feeding.

CONCLUSIONS

The dual-mechanism (pH/bacterial) coating provides colon-specificity. Each trigger mechanism has the capacity to act as a failsafe, ensuring appropriate targeting in the gastrointestinal tract. This platform technology has potential for systemic applications or the treatment of local disorders of the large intestine, such as inflammatory bowel disease.

Emerging nanopharmaceuticals

A budding interest in nanopharmaceuticals has generated a number of advancements throughout recent years with a focus on engineering novel applications. Nanotechnology also offers the ability to detect diseases at much earlier stages, such as finding hidden or overt metastatic colonies often seen in patients diagnosed with breast, lung, colon, prostate, and ovarian cancer. Diagnostic applications could build upon conventional procedures using nanoparticles, such as colloidal gold, iron oxide crystals, and quantum dots. Additionally, diseases may be managed by multifunctional agents encompassing both imaging and therapeutic capabilities, thus allowing simultaneous monitoring and treatment. A detailed evaluation of each formulation is essential to expand our current nanopharmaceutical repertoire. However, the safety and long-term effects of nanoformulations must not be overlooked. This review will provide a brief discussion of the major nanopharmaceutical formulations as well as the impact of nanotechnology into the future.

Development and characterization of chitosan succinate microspheres for the improved oral bioavailability of insulin

The present study describes the fabrication of insulin loaded chitosan succinate microspheres to improve the efficacy of orally administered insulin. Chitosan succinate polymer was synthesized and its microspheres were prepared by emulsion phase separation technique. The microspheres were characterized by FT-IR spectroscopy, scanning electron microscopy, particle size, X-ray diffraction, and swelling index. Insulin was loaded into the microspheres by passive absorption technique. The ability of microspheres to protect insulin from gastric enzymatic degradation was investigated. Stability of insulin in the microspheres was determined by gel electrophoresis and circular dichroism (CD). In vitro release studies were performed under simulated gastric and intestinal pH conditions (pH 2.0 and pH 7.4). The pharmacokinetic parameters were monitored after oral administration of insulin loaded chitosan succinate microspheres, chitosan succinate-insulin solution, as well as after subcutaneous injection of insulin to diabetic rats. The degree of succinate substitution in the synthesized polymer was 16%. The prepared microspheres were spherical with an average diameter of 49 +/- 2 microm. The insulin-loading capacity was 62%. Chitosan succinate microspheres were found to protect the degradation of insulin from gastric enzymes. The encapsulated insulin was quickly released in simulated intestinal fluid (SIF, pH 7.4), whereas a small fraction of insulin was released in simulated gastric fluid (pH 2.0). The relative pharmacological efficacy for chitosan succinate microspheres (16 +/- 4%) was almost fourfold higher than the efficacy of the chitosan succinate-insulin solution administration (4 +/- 1.5%). The results suggest that chitosan succinate microspheres could be used as a potential carrier for oral insulin delivery.

Evaluation of critical formulation parameters influencing the bioactivity of β-lactamases entrapped in pectin beads

The bioactivity of beta-lactamases upon entrapment in calcium-pectinate beads was evaluated. Non-amidated (NAP) and amidated pectin (AP) beads were prepared according to the ionotropic gelation method using calcium chloride (CaCl(2)) as gelling agent, washed and dried at 37 degrees C in an oven for 2h. Both enzyme activity and protein content were determined as well as bead calcium content. NAP allowed a better encapsulation of the protein than AP. Increasing both CaCl(2) concentration and bead residence time in the gelation medium led to a significant loss of beta-lactamase activity. The drying process of beads also lowered the enzyme activity. Moreover, bead calcium content increased as the CaCl(2) concentration augmented. Being very hygroscopic, the excess of CaCl(2) correlates with an increase of moisture content in beads that affects enzyme activity. After elimination of free calcium from beads, it was shown that a small amount is needed to form the Ca-pectinate network and that the activity of beta-lactamases is preserved in these conditions. Therefore, the bioactivity of encapsulated beta-lactamases in pectin beads mainly depends on formulation parameters such as pectin type, CaCl(2) concentration, washing and drying processes.

Time-controlled oral delivery systems for colon targeting

In recent years, many research efforts have been spent in the achievement of selective delivery of drugs into the colon following oral administration. Indeed, colonic release is regarded as a beneficial approach to the pharmacological treatment or prevention of widespread large bowel pathologies, such as inflammatory bowel disease and adenocarcinoma. In addition, it is extensively explored as a potential means of enhancing the oral bioavailability of peptides, proteins and other biotechnological molecules, which are known to be less prone to enzymatic degradation in the large, rather than in the small, intestine. Based on these premises, several formulation strategies have been attempted in pursuit of colonic release, chiefly including microflora-, pH-, pressure- and time-dependent delivery technologies. In particular, this review is focused on the main design features and release performances of time-controlled devices, which rely on the relative constancy that is observed in the small intestinal transit time of dosage forms.

Rectal and vaginal administration of insulin-chitosan formulations: an experimental study in rabbits

Insulin is a polypeptide drug and it is degraded by gastrointestinal enzymes, therefore, it cannot be used via oral route readily. There are only parenteral forms available in the market. The aim of this study was to investigate the effect of rectal and vaginal administration of various insulin gel formulations on the blood glucose level as alternative routes in rabbits. Chitosan gel (CH-gel) was used as a carrier; the penetration enhancing effect of sodium taurocholate and dimethyl-beta-cyclodextrin (DM-betaCD) was also investigated. CH-gel provided longer insulin release. The maximum decreasing effect on blood glucose level was observed with insulin-CH-gel containing 5% DM-betaCD. In conclusion, our results indicate that insulin may penetrate well through the rectal and vaginal mucosae from the CH-gel. DM-betaCD was also found to be a useful agent to enhance the penetration of insulin through rectal and vaginal membranes.

Ionically crosslinked alginate/carboxymethyl chitin beads for oral delivery of protein drugs

Complex beads composed of alginate and carboxymethyl chitin (CMCT) were prepared by dropping aqueous alginate-CMCT into an iron(III) solution. The structure and morphology of the beads were characterized by IR spectroscopy and scanning electron microscopy (SEM). IR confirmed electrostatic interactions between iron(III) and the carboxyl groups of alginate as well as CMCT, and the binding model was suggested as a three-dimensional structure. SEM revealed that CMCT had a porous morphology while alginate and their complex beads had a core-layer structure. The swelling behavior, encapsulation efficiency, and release behavior of bovine serum albumin (BSA) from the beads at different pHs were investigated. The BSA encapsulation efficiency was fairly high (>90%). It was found that CMCT disintegrated at pH 1.2 and alginate eroded at pH 7.4 while the complex beads could effectively retain BSA in acid (>85%) and reduce the BSA release at pH 7.4. The results suggested that the iron(III)-alginate-CMCT bead could be a suitable polymeric carrier for site-specific protein drug delivery in the intestine.

Pharmacodynamics and pharmacokinetics of recombinant hirudin via four non-parenteral routes

One of recombinant hirudin variants, rHV2, a polypeptide used as an anticoagulant agent in clinic, was administered to anesthetized rats via intratracheal, buccal, nasal and rectal routes. Prolongation in clotting time and thrombin time was measured to calculate pharmacological bioavailability. Plasma concentration of rHV2 was determined using a chromogenic thrombin substrate assay and pharmacokinetic parameters were obtained on the basis of a non-compartmental model. Intravenous administration was also performed as the gold standard by which the other routes were compared. Difference in pharmacological bioavailability (P.A.), bioavailability (F) and absorption rate of rHV2 was found for the four non-parenteral routes. The rank order for both P.A. and F was intratracheal>nasal>buccal>rectal. Absorption was more rapid after both intratracheal and rectal administration (tmax approximately 20-40 min), compared with that after nasal and rectal administration. It is evident that the pulmonary route is preferable to other three routes for successful systemic delivery of rHV2.

Different HPMC viscosity grades as coating agents for an oral time and/or site-controlled delivery system: a study on process parameters and in vitro performances

Currently, delayed/pulsatile release and colon delivery represent topics of remarkable interest. The present paper deals with the study and development of an oral dosage form devised to release drugs following a programmed time period after administration or, when opportune design modifications are introduced, to target the colon. The system is composed of a drug-containing core and a hydrophilic swellable polymeric coating capable of delaying drug release through slow interaction with aqueous fluids. An optional external gastroresistant film is applied to overcome gastric emptying variability, thus allowing colon delivery to be pursued according to the time-dependent approach. The aim of this work was to evaluate different hydroxypropyl methylcellulose (HPMC) viscosity grades as possible materials for the attainment of the system retarding hydrophilic layer. Both the relevant suitability for application onto tablet cores by aqueous spray-coating in fluid bed and capability of delaying drug release for a programmable period were explored and compared. Methocel E50 was found to afford the best balance among different important items, i.e. process time, retarding ability, dimensions of the coated units and possibility of finely tuning the delay duration. Further results pointed out the robustness of Methocel E50-based systems, which have shown to be practically unaffected by the concentration of the employed coating solution and the pH of the release medium, as well as only poorly influenced by ionic strength, at least with regard to values encompassed in the physiological range for gastrointestinal fluids.

Preparation and characterization of microparticles containing peptide produced by a novel process: spray freezing into liquid

The objective of this study is to evaluate excipient type on the physicochemical properties of insulin microparticles produced by spray freezing into liquid (SFL). A novel process was developed to produce microparticles containing bioactive peptides and proteins. The microparticles were formed by atomization of an aqueous feed solution containing insulin beneath the surface of a cryogenic liquid (e.g. liquid nitrogen). In this study, bovine insulin was dissolved in deionized water alone or with tyloxapol, lactose or trehalose. The aqueous solution was sprayed directly into liquid nitrogen through a polyetheretherketone capillary nozzle under high pressure to form frozen microparticles. Lyophilization was used to sublime the ice. The SFL insulin powder was characterized by different techniques, including X-ray diffraction, reverse-phase high pressure liquid chromatography, size exclusion chromatography, scanning electron microscopy (SEM), particle size distribution and surface area. The mean diameter of the insulin microparticles was 5-7 microm. SEM revealed that the microparticles were highly porous, and the morphology of the microparticles was influenced by the excipient type. The total surface area of the insulin microparticles ranged from 20 to 40 m(2)/g, and the magnitude depended on the specific composition and total solids content of the aqueous feed solution. X-ray diffraction results indicated lack of crystallinity. No change in the level of the degradation product, A-21 desamido insulin, was found in the SFL insulin samples processed alone or with trehalose or tyloxapol. Similarly, no change in formation of high molecular weight transformation products (e.g. covalent insulin dimer) was detected in the samples processed with excipients. The results demonstrated that SFL is a feasible technique for forming porous microparticles containing insulin. The physicochemical properties of insulin were preserved by the SFL technique.

Evaluation of an intestinal pressure-controlled colon delivery capsules prepared by a dipping method

A new method for preparation of large amounts of empty pressure-controlled colon delivery capsules (PCDCs) by a dipping method has been developed. Empty PCDCs are composed of two polymer membranes. The inner one was a water-insoluble polymer membrane, ethylcellulose (EC). The outer one was an enteric polymer membrane, hydroxypropylmethylcellulose phthalate (HPMCP) or hydroxypropylmethylcellulose acetate succinate (HPMCAS). By consequently dipping into an ethanolic EC solution and an alkalized enteric polymer solution, empty PCDCs were obtained after both the capsule body and cap were adjusted to the size of #2 capsules. With each enteric polymer, two types of empty PCDCs of different thickness were prepared. Fluorescein (FL) was formulated with suppository base, PEG1000, and used as a model drug. FL/PEG1000 suspension was introduced into empty PCDCs which were then sealed with enteric polymer solution. The PCDCs were evaluated by an in vivo experiment using beagle dogs. After oral administration of the test PCDC preparations containing 30 mg of FL, blood samples were obtained from the jugular vein and serum FL levels were measured. The thickness of the EC membrane layer varied in both the capsule body and cap. HPMCAS PCDCs had 62.1+/-5.0 (S.E.) microm (body) and 49.7+/-3.3 microm (cap) with thicker ones and 55.7+/-6.6 microm (body) and 46.8+/-6.2 microm (cap) with thinner ones. HPMCP PCDCs had 28.1+/-3.3 microm (body), 30.9+/-1.0 microm (cap) with thinner ones and 43.1+/-9.8 microm (body), 42.4+/-8.2 microm (cap) with thicker ones. The mean T(i) values, the first appearance time, of FL in the serum of HPMCAS PCDCs were 2.0+/-0.7 h for thicker ones and 3.8+/-0.5 h for thinner ones, while the mean T(i) values of HPMCP PCDCs were 2.0+/-0.0 h for thinner ones and 3.5+/-0.7 h for thicker ones. Since the colon arrival time in beagle dogs was 3.5+/-0.3 h as determined by a sulfasalazine test, thinner HPMCAS PCDCs and thicker HPMCP PCDCs were thought to deliver FL to the colon.