Flexor tendon-pulley interaction after tendon repair. A biomechanical study

Carbodiimide-Derivatized Synovial Fluid for Tendon Graft Coating Improves Long-Term Functional Outcomes of Flexor Tendon Reconstruction

BACKGROUND

Flexor digitorum profundus (FDP) tendon injury is common in hand trauma, and flexor tendon reconstruction is one of the most challenging procedures in hand surgery because of severe adhesion that exceeds 25% and hinders hand function. The surface properties of a graft from extrasynovial tendons are inferior to those of the native intrasynovial FDP tendons, which has been reported as one of the major causations. Improved surface gliding ability of the extrasynovial graft is needed. Thus, this study used carbodiimide-derivatized synovial fluid and gelatin (cd-SF-gel) to modify the surface of the graft, thus improving functional outcomes using a dog in vivo model.

METHODS

Forty FDP tendons from the second and fifth digits of 20 adult women underwent reconstruction with a peroneus longus (PL) autograft after creation of a tendon repair failure model for 6 weeks. Graft tendons were either coated with cd-SF-gel ( n = 20) or not. Animals were euthanized 24 weeks after reconstruction, and digits were collected after the animals were euthanized for biomechanical and histologic analyses.

RESULTS

Adhesion score (cd-SF-gel, 3.15 ± 1.53; control, 5 ± 1.26; P < 0.00017), normalized work of flexion (cd-SF-gel, 0.47 ± 0.28 N-mm/degree; control, 1.4 ± 1.45 N-mm/degree; P < 0.014), and distal interphalangeal joint motion (cd-SF-gel, 17.63 ± 6.77 degrees; control, 7.07 ± 12.99 degrees; P < 0.0015) in treated grafts all showed significant differences compared with nontreated grafts. However, there was no significant difference in repair conjunction strength between the two groups.

CONCLUSION

Autograft tendon surface modification with cd-SF-gel improves tendon gliding ability, reduces adhesion formation, and enhances digit function without interfering with graft-host healing.

CLINICAL RELEVANCE STATEMENT

The authors demonstrate a clinically relevant and translational technology by using the patient's own synovial fluid to "synovialize" an autologous extrasynovial tendon graft to improve functional outcomes following flexor tendon reconstruction.

Knotless Tendon Repair with a Resorbable Barbed Suture: An In-vivo Comparison in the Turkey Foot

Background: Un-knotted barbed suture constructs are postulated to decrease repair bulk and improve tension loading along the entire repair site resulting in beneficial biomechanical repair properties. Applying this repair technique to tendons has shown good results in ex-vivo experiments previously but thus far no in-vivo study could confirm these. Therefore, this current study was conducted to assess the value of un-knotted barbed suture repairs in the primary repair of flexor tendons in an in-vivo setting. Methods: Two groups of 10 turkeys (Meleagris gallapovos) were used. All turkeys underwent surgical zone II flexor tendon laceration repairs. In group one, tendons were repaired using a traditional four-strand cross-locked cruciate (Adelaide) repair, while in group two, a four-strand knotless barbed suture 3D repair was used. Postoperatively repaired digits were casted in functional position, and animals were left free to mobilise and full weight bear, resembling a high-tension post-op rehabilitation protocol. Surgeries and rehabilitations went uneventful and no major complications were noted. The turkeys were monitored for 6 weeks before the repairs were re-examined and assessed against several outcomes, such as failure rate, repair bulk, range of motion, adhesion formation and biomechanical stability. Results: In this high-tension in-vivo tendon repair experiment, traditionally repaired tendons performed significantly better when comparing absolute failure rates and repair stability after 6 weeks. Nevertheless, the knotless barbed suture repairs that remained intact demonstrated benefits in all other outcome measures, including repair bulk, range of motion, adhesion formation and operating time. Conclusions: Previously demonstrated ex-vivo benefits of flexor tendon repairs with resorbable barbed sutures may not be applicable in an in-vivo setting due to significant difference in repair stability and failure rates. Level of Evidence: Level IV (Therapeutic).

A Biomechanical Comparison of Gliding Resistance between Modified Lim Tsai and Asymmetric Tendon Repair Techniques in Zone II Flexor Tendon Repairs

Background: Early active motion protocols have shown better functional outcomes in zone II flexor tendon lacerations. Different techniques of tendon repair have different effects on gliding resistance, which can impact tendon excursion and adhesion formation. For successful initiation of early active mobilisation, the repair technique should have high breaking strength and low gliding resistance. Previous studies have shown the Modified Lim-Tsai technique demonstrates these characteristics. The Asymmetric repair has also shown superior ultimate tensile strength. This study aims to compare the gliding resistance between the two techniques. Methods: FDP tendons from ten fresh frozen cadaveric fingers were randomly divided into two groups, transected completely distal to the sheath of the A2 pulley and repaired using either the Modified Lim-Tsai or Asymmetric technique. The core repair was performed with Supramid 4-0 looped sutures and circumferential epitendinous sutures were done with nylon monofilament Prolene 6-0 sutures. The gliding resistance and ultimate tensile strength were then tested. Results: The gliding resistance of the Asymmetric and Modified Lim-Tsai repair techniques were 0.2 and 0.95 N respectively. This difference was significant (p = 0.008). The Modified Lim-Tsai technique had a higher ultimate tensile strength and load to 2 mm gap formation, though this was not significant. Conclusions: Gliding resistance of the Asymmetric repair is significantly less than that of Modified Lim-Tsai. Ultimate tensile strength and load to 2 mm gap formation are comparable.

Zone 2 Flexor Tendon Repair Location and Risk of Catching on the A2 Pulley

PURPOSE

To determine the region of the flexor digitorum profundus (FDP) and flexor digitorum superficialis (FDS) tendons in zone 2 that, when involved by a laceration repair, will reliably catch on the A2 pulley after surgery.

METHODS

Using fresh-frozen cadavers (5 hands, 20 digits), excursions of the FDP and FDS tendons were measured in relation to the A2 pulley. The C1, A3, and C2 pulleys were resected. The digit was maximally flexed by applying traction to the flexor tendon in the forearm. An 8-0 suture tag was placed in the flexor tendons immediately distal to the A2 pulley. The digit was then passively fully extended to measure tendon excursion. Measurements were repeated with 50% venting and 100% release of the A4 pulley. Reference points such as tendon insertions and flexion creases were obtained. This protocol was repeated sequentially for the index, middle, ring, and little fingers.

RESULTS

For all 20 fingers, the suture placed into the FDP just distal to the A2 pulley with the finger fully flexed traveled 1.6 ± 1.9 mm distal to the proximal edge of the A4 pulley with passive extension of the finger. The mean excursion for the FDP was 24.6 ± 3.2 mm, and 16.9 ± 3.1 mm for the FDS. The mean A2 pulley length was 16.2 ± 3.5 mm, and the mean distance between the distal edge of the A2 pulley and the proximal edge of the A4 pulley was 23.0 ± 3.3 mm. Venting the A4 pulley 50% and 100% increased FDP excursion a maximum of 0.9 and 1.9 mm, respectively.

CONCLUSIONS

An FDP repair proximal to the A4 pulley will slide under the A2 pulley with full active digital flexion after surgery. If the distal FDP stump lies underneath the A4 pulley with the digit fully extended, the FDP repair will not likely engage the A2 pulley with full flexion after surgery. The FDP excursion can be reliably predicted as a percentage of the A2 (distal) to the A4 (distal) pulley distance. Most importantly, the distance between the repair site and the A4 pulley approximately equals the length of the A2 pulley that requires release to avoid postoperative triggering.

CLINICAL RELEVANCE

Knowledge of this high-risk region of flexor tendon repair will guide surgeons regarding the potential need for partial release of the A2 pulley.

Biomechanics Study of the Holding Power between Tendon and Suture Using Different Techniques

Background: The holding power of a repaired flexor tendon injury is related to surface sutures, suture material and different techniques. Nowadays, a barbed suture material offers the possibility of knotless flexor tendon repair but many hospitals use non-barbed suture materials. The purpose of this study was to compare a barbed suture material and a non-barbed suture material for primary stability under static loading and increased knots in the non-barbed suture material (knot technique) for increased holding power of tendons in animal testing. Methods: Forty-five fresh porcine tendons were randomized into three groups: Group 1 (grasping technique group) used a four-strand core suture grasping a four-strand modified Kessler suture by non-barbed suture material [Non-absorbable monofilament polybutester 3-0] was used to repair the tendon with a surgical knot; in Group 2 (knot technique group) a four-strand core suture used the knot technique by non-barbed suture material [Non-absorbable monofilament polybutester 3-0] to repair the tendon with a continuous suture adding surgical knots in the same place as the surgical knot at the repair sites; and Group 3 (knotless technique group) used a four-strand core suture with the knotless technique in modified Kessler suture with barbed suture material [Non-absorbable monofilament polybutester 3-0] to repair the tendon without a knot. Our objective was to compare the ultimate tensile strength between the groups. Results: The mean tensile strength was 30.38 ± 5.04 N for group 1, 41.71 ± 2.62 for group 2 and 47.53 ± 4.89 for the group 3. The ANOVA test revealed a significant difference among the various techniques (p < 0.05). The highest tensile strength was found in the knotless technique using barbed suture material group. Conclusions: The knotless technique using barbed suture material demonstrated the highest tensile strength in suture repairs. The maximum tensile strength was significantly higher in this group.

Changes in frictional coefficient with increased tendon surface tear-An experimental animal model

AIM

Surface tribological properties of a tendon in terms of coefficient of friction and lubrication mechanism are expected to change with the progression of surface tears which can affect the optimal function of the tendon. This study investigated whether coefficient of friction proportionally increases with the progression of a surface tear in a bovine tendon model.

METHODS

The study was performed using a pin-on-glass tribometer and bovine tendon samples (n = 16) divided into 4 groups. One group of tendons had no surface tears and thus served as a control, whilst the other 3 groups comprised tendons with increasing severity of artificially-induced surface tears. The coefficient of friction and the lubrication mechanism of the four groups of samples were investigated, calculated and compared.

RESULTS

Statistical analysis showed significant change in coefficient of friction between the control group and the group with minimal tear (p < 0.05) while no difference noted between the groups of moderate to severe tear suggesting that the coefficient of friction increases initially with appearance of surface tears, though further progression to a significant tear do not cause a further increase in the frictional coefficient. There was no change in the lubrication mechanism between the groups.

CONCLUSION

This finding appears to contradict the speculation that the frictional coefficient continues to increase with an increase in surface tear severity. The finding has not been reported before and requires validation in future with testing in human tissue.

Gliding Resistance After Epitendinous-First Repair of Flexor Digitorum Profundus in Zone II

PURPOSE

The importance of flexor tendon repair with both core and epitendinous suture placement has been well established. The objective of this study was to determine whether suture placement order affects gliding resistance and bunching in flexor digitorum profundus tendons in a human ex vivo model.

METHODS

The flexor digitorum profundus tendons of the index, middle, ring, and little fingers of paired cadaver forearms were tested intact for excursion and mean gliding resistance in flexion and extension across the A2 pulley. Tendons were subsequently transected and repaired with either an epitendinous-first (n = 12) or a control (n = 12) repair. Gliding resistance of pair-matched tendons were analyzed at cycle 1 and during the steady state of tendon motion. The tendon repair breaking strength was also measured.

RESULTS

The mean steady state gliding resistance was less for the epitendinous-first repair than for the control repair in flexion (0.61 N vs 0.72 N) and significantly less in extension (0.68 N vs 0.85 N). Similar results were seen for cycle 1. None of the repairs demonstrated gap formation; however, control repairs exhibited increased bunching. Load to failure was similar for both groups.

CONCLUSIONS

The order of suture placement for flexor tendon repair is important. Epitendinous-first repair significantly decreased mean gliding resistance, allowed for easier placement of core sutures, and resulted in decreased bunching.

CLINICAL RELEVANCE

Epitendinous-first flexor tendon repairs may contribute to improved clinical outcomes compared with control repairs by decreasing gliding resistance and bunching.

Turkey model for flexor tendon research: in vitro comparison of human, canine, turkey, and chicken tendons

BACKGROUND

Flexor tendon injuries are one of the most common hand injuries and remain clinically challenging for functional restoration. Canine and chicken have been the most commonly used animal models for flexor tendon-related research but possess several disadvantages. The purpose of this study was to explore a potential turkey model for flexor tendon research.

METHODS

The third digit from human cadaveric hands, canine forepaws, turkey foot, and chicken foot were used for this study. Six digits in each of four species were studied in detail, comparing anatomy of the flexor apparatus, joint range of motioņ tendon excursion, tendon cross-sectional area, work of flexion, gliding resistance at the level of the A2 pulley, modulus of elasticity, suture retention strength, and histology across species.

RESULTS

Anatomically, the third digit in the four species displayed structural similarities; however, the tendon cross-sectional area of the turkey and human were similar and larger than canine and chicken. Furthermore, the turkey digit resembles the human's finger with the lack of webbing between digits, similar vascularization, tendon excursion, work of flexion, gliding resistance, mechanical properties, and suture holding strength. More importantly, human and turkey tendons were most similar in histological appearance.

CONCLUSIONS

Turkey flexor tendons have many properties that are comparable to human flexor tendons which would provide a clinically relevant, economical, nonhuman companion large animal model for flexor tendon research.

Biomechanical investigation of 'figure of 8' flexor tendon repair techniques

This biomechanical study compared the original Al-Qattan repair with other modifications postulated to reduce bulk and friction, thereby potentially improving outcome. A total of 32 cadaveric digits with intact flexor apparatus were used. In each digit, the flexor digitorum profundus and flexor digitorum superficialis tendons were cut cleanly in Zone 2. We tested Al-Qattan's technique along with three modifications using stronger suture material and varying the number of strands across the repair site. Of the four repair techniques, the modified Al-Qattan's technique using two 'figure of 8' 4-0 Fiberwire core sutures (Group 4) had the best balance of ultimate tensile strength (50.9 N), 2 mm gapping force (38 N) and friction. The modified technique provided a stronger repair for early active mobilization and has less friction than the originally described repair.

Providing Quantitative Feedback When Teaching Tendon Repair: A New Tool

Flexor tendon repair remains one of the more difficult technical tasks facing the hand surgeon. A good repair must be both strong and able to glide smoothly through the tendon sheath. The purpose of this study is to present a model that allows surgeons to improve their technique of flexor tendon repair by receiving feedback on these important biomechanical parameters. The set-up requires testing equipment found in most biomechanical laboratories and should be available in many academic medical centres. Preliminary data suggest that receiving feedback about the strength and smoothness of a flexor tendon repair may be a very useful tool in helping surgeons improve the overall quality of their tendon repair technique.

Evidence-based flexor tendon repair

The goal of flexor tendon repair is to achieve normal range of motion of the finger or thumb. The surgical approach depends on the level of injury. Multistrand core suture repairs are recommended for primary flexor tendon repair. It is evident that at least 4 strands are required to an initiate and active range of motion protocol. The epitendinous suture can also increase the strength of the repair. Careful attention to the post-operative therapy regiment is critical to a successful repair.

Barbed Sutures and Tendon Repair-a Review

INTRODUCTION

Traumatic tendon lacerations are a common problem encountered by hand surgeons worldwide. Although the use of barbed suture to repair tendon lacerations has gained theoretical popularity in recent years, there is little information available regarding the safety, efficacy, longevity, or complications encountered when used in tenorraphy. In this study, we review the available literature on the use of barbed suture in tendon repair.

METHODS

Studies conducted between 1980 and 2014 were identified using several databases, including EMBASE, SCOPUS, MEDLINE, and Web of Science. Keywords used to search for appropriate studies included the following: barbed, v loc, quill, tendon, tendon injuries, suture, tenorraphy, injury, and laceration, in various combinations.

RESULTS

Our initial literature search identified 47 articles, and 8 were deemed appropriate for review after applying our exclusion criteria. The data from each of the articles is reviewed for the following major categories:Maximum load to failureMode of failureLoad to 2-mm gapChange in cross-sectional areaType of repair.

CONCLUSIONS

Barbed suture tenorraphy has a myriad of theoretical advantages, supported by varying ex vivo studies, as compared to traditional techniques. However, due to the non-uniformity in current studies and the lack of available data in a live model, we are unable to argue for or against barbed suture tenorraphy. We believe our review provides the most in-depth analysis of barbed suture tenorraphy to date, illuminates the potential advantages of using barbed sutures, and highlights the need for further investigation into this technique.

Effect of triggering and entrapment on tendon gliding properties following digital flexor tendon laceration: in vitro study on turkey tendon

The optimal management of partial flexor tendon laceration is controversial and remains a clinical challenge. Abnormal tendon gliding (triggering and entrapment) was assessed at the A2 pulley in 40 turkey tendons in three groups: intact, partially divided (palmar or lateral), and trimmed. Testing was of gliding resistance and friction coefficient at 30° and 70° of flexion, loaded with 2 and 4 N. We observed for triggering and entrapment. The changes in gliding properties were compared and analysed using Wilcoxon matched pair testing. A significant difference was found in the change in gliding properties of intact to lacerated and lacerated to trimmed tendons and between tendons that glided normally compared with those exhibiting triggering or entrapment. This suggests that palmar and lateral lacerations which, through clinical examination and visualization, are found to glide normally should be treated with early mobilization. However, partial lacerations that exhibit triggering or entrapment should be trimmed.

The Effect of Pulley Reconstruction on Maximum Flexion, Bowstringing, and Gliding Coefficient in the Setting of Zone II Repair of FDS and FDP: a Cadaveric Investigation

PURPOSE

The purpose of this experiment was to determine the effect of A2 pulley reconstruction on gliding coefficient (GC), bowstringing, and proximal interphalangeal (PIP) joint maximum flexion angle after zone II repair of flexor digitorum superficialis (FDS) and flexor digitorum profundus (FDP) lacerations.

METHODS

Fresh frozen cadaver forearms were mounted, and the wrist and MCP joints fixed. FDS and FDP tendons were dissected free, and sequential loads were applied while digital images were captured. The dissected digit with intact native A2 pulley, FDS, and FDP tendons was used as the control (group 1). Zone II lacerations followed by four-stranded repair of FDP plus epitendinous suture and repair of FDS were then performed, and the data recorded (group 2). A2 pulley excision and reconstruction with a loop of palmaris longus autograft was then completed and the specimens sequentially loaded and photographed (group 3). Using the digital images, GC, bowstringing, and maximum flexion angle were calculated.

RESULTS

No difference in maximum flexion angle was observed across the three testing conditions. Zone II laceration and subsequent FDS and FDP tendon repair significantly increased the GC for group 2 specimens; however, pulley reconstruction alleviated some of this increase for group 3. Bowstringing was significantly greater after pulley reconstruction, with a mean increase of 1.9 mm at maximum flexion for group 3 specimens relative to group 1 controls.

DISCUSSION

Strong flexor tendon repairs are needed to prevent gap formation and subsequent triggering; however, the increased bulk from these large repairs can itself produce deleterious triggering, as well as tendon abrasion. Pulley reconstruction, in the setting FDP and FDS repair (group 3), significantly reduced the GC relative to tendon repair alone (group 2). While bowstringing was significantly greater after pulley reconstruction (group 3), it averaged only 1.9 mm over group 1 specimens and did not compromise maximum flexion angle compared to the uninjured controls (group 1) or the isolated tendon repair digits (group 2).

Flexor tendon repair: a comparative study between a knotless barbed suture repair and a traditional four-strand monofilament suture repair

We compared the tensile strength of a novel knotless barbed suture method with a traditional four-strand Adelaide technique for flexor tendon repairs. Forty fresh porcine flexor tendons were transected and randomly assigned to one of the repair groups before repair. Biomechanical testing demonstrated that the tensile strengths between both tendon groups were very similar. However, less force was required to create a 2 mm gap in the four-strand repair method compared with the knotless barbed technique. There was a significant reduction in the cross-sectional area in the barbed suture group after repair compared with the Adelaide group. This would create better gliding within the pulley system in vivo and could decrease gapping and tendon rupture.

Gliding resistance and modifications of gliding surface of tendon: clinical perspectives

The smooth gliding of the normal human digital flexor is maintained by synovial fluid lubrication and lubricants bound to the tendon surface. This system can be disrupted by degenerative conditions such as trigger finger, or by trauma. The resistance to tendon gliding after surgical repair of the lacerated digital flexor tendon relates to location of suture knots, exposure of suture materials, and type of surgical repair and materials. Restoration of a functioning gliding surface after injury can be helped by using low-friction, high-strength suture designs, therapy that enables gliding, and the addition of lubricants to the tendon surface.

The effects of hylan g-f 20 surface modification on gliding of extrasynovial canine tendon grafts in vitro

PURPOSE

Studies have shown that a lubricant exogenously applied on extrasynovial tendon surfaces can reduce the gliding resistance after flexor tendon repair; however, the reagents that have been tested are solely for experimental testing and are not available for clinical use. The purpose of this study was to investigate the effect of exogenously applied hylan G-F 20, a U.S. Food and Drug Administration-approved hyaluronic acid for the treatment of osteoarthritis, on extrasynovial tendon gliding resistance in an in vitro canine model.

METHODS

Twenty-four canine peroneus longus (PL) tendons and proximal pulleys of the ipsilateral paws were treated with 1 of 3 solutions: saline, carbodiimide derivatized hylan G-F 20, or unmodified hylan G-F 20. The gliding resistance of each tendon preparation was then measured over 1000 cycles in a saline bath.

RESULTS

After 1,000 cycles, the gliding resistance of the PL tendons treated with unmodified hylan G-F 20 decreased significantly compared with the saline-treated tendons. The gliding resistance of the PL tendons treated with modified hylan G-F 20 increased significantly compared with the saline group.

CONCLUSIONS

The PL tendons treated with pure hylan G-F 20 showed a positive effect on the gliding resistance.

CLINICAL RELEVANCE

The results of this in vitro canine study suggest that exogenously applied hylan G-F 20 improves gliding of the extrasynovial tendon graft. This material may be capable of reducing friction over flexor tendon repair sites and flexor tendon grafts.

Tendon injuries of the hand

Tendon injuries are the second most common injuries of the hand and therefore an important topic in trauma and orthopedic patients. Most injuries are open injuries to the flexor or extensor tendons, but less frequent injuries, e.g., damage to the functional system tendon sheath and pulley or dull avulsions, also need to be considered. After clinical examination, ultrasound and magnetic resonance imaging have proved to be important diagnostic tools. Tendon injuries mostly require surgical repair, dull avulsions of the distal phalanges extensor tendon can receive conservative therapy. Injuries of the flexor tendon sheath or single pulley injuries are treated conservatively and multiple pulley injuries receive surgical repair. In the postoperative course of flexor tendon injuries, the principle of early passive movement is important to trigger an “intrinsic” tendon healing to guarantee a good outcome. Many substances were evaluated to see if they improved tendon healing; however, little evidence was found. Nevertheless, hyaluronic acid may improve intrinsic tendon healing.

ADHESION FORMATION AFTER FLEXOR TENDON REPAIR: COMPARISON OF TWO- AND FOUR-STRAND REPAIR WITHOUT EPITENDINOUS SUTURE

Increased handling, increased bulk at the repair site and an increase in external suture material may affect adhesion formation and gliding after tendon repair. A previous study1 showed no significant difference in biomechanical or histopathological measurement of adhesion formation in two- and four-strand repairs combined with an epitendinous suture in the chicken model. In the present study, the flexor digitorum profundus tendon of the middle toe of 47 broiler chickens was cut and repaired with either a single (two-strand) or double (four-strand) modified Kessler core suture without epitendinous suture and immobilised for four weeks. Adhesion formation was measured by biomechanical testing or quantitative and qualitative histopathology. Biomechanical and histological data showed no differences between two- and four-strand repairs. Results did not differ from the previous study which used an epitendinous suture. Adhesion formation is not necessarily increased when multi-strand techniques are used, nor by the placement of an epitendinous suture if care is taken with surgical technique. Individual healing response introduces more variability than an increase in tendon handling by an experienced surgeon.

Gliding resistance and triggering after venting or A2 pulley enlargement: a study of intact and repaired flexor tendons in a cadaveric model

PURPOSE

This study compared the effect of 2 techniques of pulley management--venting and pulley enlargement (complete A2 incision with pulley repair and sheath closure using a retinacular graft)--on gliding resistance and on the incidence of triggering following zone 2 flexor tendon repairs in human cadaver specimens.

METHODS

In vitro gliding resistance and the incidence of triggering were determined in 10 human cadaver specimens under 5 progressive conditions: (1) intact, (2) tendon repair (both tendons cut and repaired with the sheath intact), (3) condition 2 plus 50% venting of the distal A2 pulley, (4) condition 2 with venting extended to 66% of distal A2, and (5) condition 4 plus pulley enlargement. Triggering was determined in the same specimens by 2 computational algorithms that detected force changes in the load cells used to measure gliding resistance.

RESULTS

Tendon repair increased gliding resistance from the intact condition by an average of 229%. Gliding resistance was reduced in conditions 3, 4, and 5 from the repair condition by 15%, 25%, and 22%, respectively. Triggering commenced with tendon repair in some specimens, and its incidence increased with 50% venting. Further venting reduced triggering, but not as effectively as pulley enlargement did.

CONCLUSIONS

In this cadaveric study, venting and pulley enlargement reduce gliding resistance by equivalent amounts. Triggering persisted despite venting. The surgeon should carefully examine tendon repairs for free gliding. Pulley enlargement might be more effective than venting in reducing the incidence of triggering.

Application of carbodiimide derivatized synovial fluid to enhance extrasynovial tendon gliding ability

PURPOSE

To investigate the effects of surface modification of extrasynovial tendon with a carbodiimide derivatized synovial fluid (SF) on the gliding ability of extrasynovial tendon for a possible tendon graft application.

METHODS

We used 63 peroneus longus tendons from canine hind legs. We immediately assessed 3 tendons morphologically using a scanning electron microscope (SEM); these served as the normal tendon group. The other 60 tendons were randomly assigned to each of 6 experimental groups treated with (1) control (saline); (2) 1% 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC) plus 1% N-hydroxysuccinimide (NHS) (cd only); (3) 1% EDC/NHS plus 10% gelatin (cd-G); (4) SF plus 1% EDC/NHS plus 10% gelatin (cd-SF-G); (5) SF only; or (6) SF plus 1% EDC/NHS (cd-SF). We measured the gliding resistance for 1,000 cycles of simulated flexion-extension motion. We also observed the tendon surface smoothness by SEM.

RESULTS

Compared with the first cycle in each group, the gliding resistance after 1,000 cycles of tendon motion was significantly increased in the control, cd only, cd-gelatin, SF only, and cd-SF groups (p<.05). In contrast, we found no significant difference in gliding resistance between the first cycle and 1,000 cycles for the cd-SF-G-treated group. In addition, the gliding resistance in the cd-SF, cd-G, and cd-SF-G groups was significantly lower than the control group after 1,000 cycles of tendon motion (p<.05) and the gliding resistance of the cd-SF-G group was significantly lower than both the cd-G and cd-SF groups (p<.05). On SEM, the surface treated with cd-SF-G was smooth after 1,000 cycles, whereas the other surfaces were rough.

CONCLUSIONS

Surface modification of extrasynovial tendon with cd-SF-G improves tendon gliding ability. This treatment may be useful clinically in improving the outcomes of tendon autografts.

Effects of different temperatures, velocities and loads on the gliding resistance of flexor digitorum profundus tendons in a human cadaver model

The purpose of this study was to investigate the effects of temperature, velocity and load on the gliding resistance (GR) of flexor digitorum profundus (FDP) tendons in a human cadaver model. A total of 40 FDP tendons from the index through small digits of ten human cadavers were tested to assess the effect of temperature (4, 23 or 36 °C), velocity (2, 4, 6, 8, 10 or 12 mm/s) and load (250, 500, 750, 1000, 1250 and 1500 g) on GR. The mean GR at 4 °C was significantly higher than the mean GR at 36 °C (p<0.0066). There was no significant difference in the mean GR of the tested velocities. The mean GR was proportional to load, with each successive load having significantly higher GR than the loads before it (all p<0.001). There was no significant difference in the mean GR by digit. In this in vitro model, we have demonstrated that tendon gliding resistance is proportional to load, independent of velocity and somewhat affected by temperature. We conclude that it is important to specify these conditions when reporting gliding resistance, especially load and temperature.

Effect of core suture technique and type on the gliding resistance during cyclic motion following flexor tendon repair: a cadaveric study

We investigated the effects of two suture techniques using three suture types in a human model in vitro. We obtained 60 flexor digitorum profundus (FDP) tendons from cadavers and measured the gliding resistance during 1,000 cycles of simulated flexion-extension motion and load to failure of six groups: the modified Kessler (MK) repair using 3-0 coated, braided polyester (Ethibond, Ethicon, Somerville, NJ), 3-0 coated, braided polyester/monofilament polyethylene composite (FiberWire®; Arthrex, Naples, FL), or 4-0 FiberWire; and the Massachusetts General Hospital (MGH) repair using 3-0 Ethibond, 3-0 FiberWire, or 4-0 FiberWire. The 3-0 Ethibond MGH suture had significantly higher ultimate load to failure than the 3-0 or 4-0 FiberWire MK suture. The 3-0 and 4-0 FiberWire MGH sutures had significantly higher load to failure than the three MK groups. The gliding resistances of the three MGH groups were significantly higher than that of the three corresponding MK groups. The MGH repair had more gliding resistance than an MK repair, even when comparing large diameter suture in the MK repair with smaller diameter suture in the MGH repair. In this study, suture technique was more important in predicting repair load to failure and gliding resistance than the nature or caliber of the suture material that was used.

The four-strand staggered suture for flexor tendon repair: in vitro biomechanical study

PURPOSE

To assess in vitro biomechanical properties of a 4-strand flexor tendon suture compared to 3 established suture techniques. This technique, which is made of 2 alternating and staggered sutures, one external to the tendon and the other internal, must be sufficiently resistant to withstand loads applied by modern, early active mobilization protocols.

METHODS

Forty flexor hallucis longus tendons were harvested from fresh cadavers, cut, and repaired using 4 different suture techniques (Strickland, Wolfe, modified Savage, and a new technique called 4-strand staggered). All repaired tendons were submitted to static loading trials to measure gap formation (2 mm) in relation to tensile force and breaking force of all 4 sutures. Twenty additional tendons were repaired with the new suture technique and submitted to dynamic trials under cyclic loading.

RESULTS

The 4-strand staggered suture technique proved to be statistically superior to Strickland and modified Savage techniques following the static loading trials for gap formation and breaking force. This technique is statistically superior to the Wolfe cruciate suture for breaking force and superior but not statistically significant for gap formation. The dynamic loading trials have shown that the 4-strand staggered suture can tolerate in vitro loads similar to those exerted by modern, early active mobilization protocols.

CONCLUSIONS

The suture technique created by the authors proved to hold superior biomechanical properties than the other techniques tested in this study and might be suitable for early active mobilization protocols.

The effect of epitendinous suture technique on gliding resistance during cyclic motion after flexor tendon repair: a cadaveric study

PURPOSE

To investigate the effects of motion following repair with a modified Kessler core suture and 5 different epitendinous suture designs on the gliding resistance, breaking strength, 2-mm gap force, and stiffness of flexor digitorum profundus tendons in a human in vitro model.

METHODS

The flexor digitorum profundus tendons of the index, middle, ring, and little fingers of 50 human cadavers were transected and repaired with a 2-strand modified Kessler suture and assigned to 5 groups based on type of epitendinous suture design. The 5 epitendinous designs tested were a simple, running epitendinous suture whose knot was outside the repair (simple running KO); a simple, running epitendinous suture whose knot was inside the repair (simple running KI); a cross-stitch epitendinous suture; an interlocking, horizontal mattress (IHM) epitendinous suture; and a running-locking epitendinous suture. The tendon repair strength and 2-mm gap force were measured after 1,000 cycles of tendon motion. The resistance to gap formation, a measure of repair stiffness, was obtained from the force versus gap data.

RESULTS

None of the repairs showed any gap formation after 1,000 cycles of tendon motion. The cross-stitch epitendinous suture, IHM epitendinous suture, and running-locking epitendinous suture all had significantly lower gliding resistance than the simple running KO epitendinous suture after 1 cycle. The simple running KI epitendinous suture had significantly lower gliding resistance than the simple running KO epitendinous suture after 100 cycles and 1,000 cycles. The differences for gap force at 2 mm and stiffness of the repaired tendon evaluation were not statistically significant. The cross-stitch epitendinous suture, IHM epitendinous suture, and running-locking epitendinous suture all had significantly higher maximal failure strength after 1,000 cycles than the simple running KI epitendinous suture.

CONCLUSIONS

The cross-stitch, IHM, and running-locking epitendinous sutures had the best combination of higher strength and lower gliding resistance in this study. Although these findings suggest a potential for these suture types to be preferred as epitendinous sutures, these repairs should first be investigated in vivo to address their effect on tendon healing and adhesion formation.

Carbodiimide-derivatized hyaluronic acid surface modification of lyophilized flexor tendon: a biomechanical study in a canine in vitro model

BACKGROUND

Intrasynovial grafts are the ideal solution to replace defects in intrasynovial flexor tendons, but autologous graft sources are rarely available. The purpose of the present study was to test the hypotheses that an intrasynovial tendon prepared with repetitive freeze-thaw cycles and lyophilization (as a means of reducing immunogenicity) has increased frictional force (gliding resistance) in comparison with fresh intrasynovial tendons and that a lyophilized intrasynovial flexor tendon that is modified with carbodiimide-derivatized hyaluronic acid and gelatin has decreased frictional force in comparison with untreated lyophilized tendons.

METHODS

Thirty-six flexor digitorum profundus tendons from the second and fifth digits of canine hind paws were randomly assigned to three groups. Twelve tendons were immediately assessed both mechanically and morphologically and served as the normal tendon group. The other twenty-four tendons were prepared with repetitive freeze-thaw cycles and lyophilization and were randomly assigned to two groups, including one group in which the tendons were treated with carbodiimide-derivatized hyaluronic acid and gelatin and one group in which the tendons were not treated. The frictional force was measured during 1000 cycles of simulated flexion-extension motion in all tendons, and the mean frictional forces were compared. The tendons were then observed with use of transmitted light microscopy for residual hyaluronic acid on the tendon surface, and the smoothness of the surface was evaluated with use of scanning electron microscopy.

RESULTS

The frictional force after lyophilization was significantly increased by 104.9% after the first cycle and by 99.5% after 1000 cycles in comparison with the normal tendon (p < 0.05). The frictional force of the lyophilized tendons after treatment with carbodiimide-derivatized hyaluronic acid and gelatin was not significantly different from that of normal tendons. The untreated lyophilized tendon surfaces were observed on scanning electron microscopy to be rough in appearance, whereas the normal surface and the surface treated with carbodiimide-derivatized hyaluronic acid and gelatin were smooth, with residual hyaluronic acid present on the gliding surface.

CONCLUSIONS

Lyophilization alters tendon surface morphology and increases tendon frictional force. Surface modification with carbodiimide-derivatized hyaluronic acid and gelatin can mitigate this adverse effect.

CLINICAL RELEVANCE

Tendon surface modification with carbodiimide-derivatized hyaluronic acid and gelatin can improve the gliding ability of lyophilized flexor tendons and therefore may improve the utility of lyophilized tendon allografts as a tendon graft substitute.

Effects of foot orthoses on the work of friction of the posterior tibial tendon

BACKGROUND

Posterior tibial tendon dysfunction is a significant contributor to flatfeet. Non-operative treatments, like in-shoe orthoses, have varying degrees of success. This study examined changes to the work of friction of the posterior tibial tendon under three conditions: intact, simulated flatfoot, and flatfoot with an orthosis. It was hypothesized that work of friction of the posterior tibial tendon would significantly increase in the flatfoot, yet return to normal with an orthosis. Changes to bone orientation were also expected.

METHODS

Six lower limb cadavers were mounted in a foot simulator, that applied axial and a posterior tibial tendon load. Posterior tibial tendon excursion, gliding resistance, and foot kinematics were monitored, and work of friction calculated. Each specimen moved through a range of motion in the coronal, transverse, and sagittal planes.

FINDINGS

Mean work of friction during motion in the coronal plane were 0.17 N cm (SD 0.07 N cm), 0.25 N cm (SD 0.09 N cm), and 0.23 N cm (SD 0.09 N cm) for the intact, flatfoot, and orthosis conditions, respectively. Motion in the transverse plane yielded average WoF of 0.36 N cm (SD 0.28 N cm), 0.64 N cm (SD 0.25 N cm), and 0.57 N cm (SD 0.38 N cm) in the same three conditions, respectively. The average tibio-calcaneal and tibio-metatarsal valgus angles significantly increased in the flatfoot condition (5.8 degrees and 9 degrees , respectively). However, the orthosis did slightly correct this angle.

INTERPRETATION

The prefabricated orthosis did not consistently restore normal work of friction, though it did correct the flatfoot visually. This implies that patients with flatfeet may be predisposed to developing posterior tibial tendon dysfunction due to abnormal gliding resistance, though bone orientations are restored.

Primary tendon sheath enlargement and reconstruction in zone 2: an in vitro biomechanical study on tendon gliding resistance

PURPOSE

To investigate our hypothesis that primary pulley enlargement and repair using an extensor retinaculum graft will reduce tendon repair gliding resistance. The benefit of pulley enlargement has been tested in experimental animals, but its effect on gliding resistance in vitro using human fingers is not known.

METHODS

In vitro gliding resistance in the proximal tendon sheaths (A1 through A3) was measured and compared in 7 cadaver fingers using the method of Uchiyama and colleagues at a fixed 50 degrees over the proximal sheath under 3 conditions: (1) intact tendons with intact proximal sheath; (2) laceration and 2-strand core plus running epitenon repair of the tendons with intact sheath; and (3) repaired tendons with enlargement of the A2 pulley and adjacent proximal sheath by incision and repair with an extensor retinacular graft. Results were analyzed statistically.

RESULTS

Gliding resistance increased from an average of 0.44 N +/- 0.07 in the intact condition to an average of 1.51 N +/- 0.23 (a mean increase of 243%) when the tendons were cut and repaired. Enlarging the proximal sheath by sheath incision and graft repair reduced the gliding resistance from the repair condition to 1.04 N +/- 0.15 (a mean decrease of 31%). These changes are statistically significant.

CONCLUSIONS

In vitro, repaired tendons had a greater resistance to gliding than that of the intact tendons through the proximal sheath when tested by the method of Uchiyama and colleagues. Enlargement and repair with an extensor retinacular graft of the A2 pulley and adjacent sheath significantly reduced resistance to repaired tendon gliding. These findings support further investigation into the concept that primary pulley enlargement may improve tendon function after repair.

The influence of concentric and eccentric loading on the finger pulley system

In this study we investigated the influence of the loading condition (concentric vs. eccentric loading) on the pulley system of the finger. For this purpose 39 cadaver finger (14 hands, 10 donors) were fixed into an isokinetic loading device. The forces in the flexor tendons and at the fingertip were recorded. In the concentric loading condition A2 and A4 ruptures as well as alternative events such as fracture of a phalanx or avulsion of the flexor tendons were almost equally distributed, whereas the A2 pulley rupture was the most common event (59%) in the eccentric loading condition and alternative events were rare (23.5%). The forces in the deep flexor tendon, the fingertip and in the pulleys were significantly lower in the eccentric loading condition. As the ruptures occurred at lower loads in the eccentric than in the concentric loading condition it can be concluded that friction may be an advantage for climbers, supporting the holding force of their flexor muscles but may also increase the susceptibility to injury.

Gliding resistance and strength of composite sutures in human flexor digitorum profundus tendon repair: an in vitro biomechanical study

PURPOSE

Although the strength of a tendon repair is clearly important, the friction of the repair is also a relevant consideration. The purpose of this study was to characterize the frictional coefficient, gliding resistance, and breaking strength of suture materials and a suture construct commonly used for flexor tendon repair.

METHODS

We measured the friction coefficients of 3-0 braided nylon enclosed in a smooth nylon outer shell (Supramid, S. Jackson, Alexandria, VA), 3-0 braided polyester coated with polybutilate (Ethibond, Ethicon, Somerville, NJ), and 3-0 braided polyester/monofilament polyethylene composite (FiberWire, Arthrex, Naples, FL) sutures. We also measured the gliding resistance, linear breaking strength, and resistance to gapping of zone 2 modified Pennington tendon repairs with the 2 lowest-friction sutures in 20 human cadaveric flexor digitorum profundus tendons.

RESULTS

The braided polyester/monofilament polyethylene composite had a significantly lower friction coefficient (0.054) than either the coated polyester (0.076) or nylon (0.130) sutures. The gliding resistances of the repaired tendons with braided/monofilament polyethylene composite suture and those of coated, braided polyester were similar. The strength of the 2 repairs (force to produce a 2 mm gap) and resistance to gap formation were also not significantly different.

CONCLUSIONS

Braided polyester composite is a low-friction suture material. However, when this suture was used for tendon repair with a locking suture technique, it did not show a significant effect on the gliding resistance and repair strength compared with the same repair using a coated polyester suture.

Friction between finger flexor tendons and the pulley system in the crimp grip position

BACKGROUND

Disruption of the finger flexor tendon pulleys are the most often occurring injury in rock climbers due to bowstringing of tendons during crimp grip position. The aim of this study was to quantify friction between the flexor tendons and pulleys and the influence of high load and speed of movement as a potential factor of pulley disruption.

METHODS

Friction between the flexor tendons and pulleys of eight human cadaver fingers was indirectly determined using an isokinetic movement device. During flexion and extension movement with rotational speed from 30 to 210 deg/s in the proximal interphalangeal joint and with load from 20 to 100 N to the flexor tendons the flexion force at the tip of the finger was measured.

FINDINGS

With 40 N loaded flexor tendons the force at the fingertip was 14.5 N (SD1.5) during extension and 12.6N (SD1.3) during flexion movement. Corresponding force difference of 12.9% and 3.77 N (SD0.6) force of friction can be calculated. Friction peaked at 85.8 degrees (SD2.05) of flexion of the proximal interphalangeal joint. Different speed of motion and load to the flexor tendons did not influence force difference other than linear.

INTERPRETATION

Considerable friction between flexor tendons and pulleys is apparent and therefore may have an influence on pulley injuries. Particularly during the crimp grip position where the proximal interphalangeal joint is flexed about 90 degrees shows the greatest amount of friction. However there was no change of friction during high speed motion and no other than linear increase during high load.

Minimally invasive A2 flexor tendon pulley and biomechanical comparison with two accepted techniques

The increasing popularity of rock climbing and its associated injury of closed traumatic pulley A2 rupture has sparked investigator interest in pulley biomechanics. Biomechanically, the A2 and A4 pulleys are important for preventing bowstringing of the flexor tendon upon digital flexion. The literature is replete with reparative techniques for A2 pulley rupture. These techniques include direct fibrous tissue repair, as well as the use of palmaris longus autograft for single- and double-loop reconstruction. Through a previously undescribed minimally invasive double-anchor technique, we used palmaris longus tendon and 2-mm bioabsorbable suture anchors to reconstruct the A2 pulley at its anatomical location in a cadaver model. Then the ultimate load to failure of this reconstruction was tested against 2 known reconstructive techniques, namely, single-loop and double-loop palmaris repair. There was no significant difference between the strength of the previously described single-loop technique and our novel double-anchor technique. Furthermore, our minimally invasive repair obviated the need for the circumferential dissection and soft tissue trauma associated with the single- and double-loop repairs.

Lubricin surface modification improves extrasynovial tendon gliding in a canine model in vitro

BACKGROUND

Lubricin is the principal lubricant in synovial fluid. Although lubricin has been identified in tendons, especially on the surface of intrasynovial tendons such as the flexor digitorum profundus tendon, its ability to improve tendon gliding is unknown. The purpose of this study was to investigate the effects of exogenously applied lubricin on the gliding of extrasynovial tendons in a canine model in vitro.

METHODS

Forty peroneus longus tendons, along with the proximal pulley in the ipsilateral hind paw, were harvested from adult mongrel dogs. After the gliding resistance of the normal tendons was measured, the tendons were treated with one of the following solutions: saline solution, lubricin, carbodiimide derivatized gelatin (cd-gelatin), carbodiimide derivatized gelatin with hyaluronic acid (cd-HA-gelatin), or carbodiimide derivatized gelatin to which lubricin had been added in a second step (cd-gelatin plus lubricin). Tendon gliding resistance was measured for 1000 cycles of simulated flexion-extension motion of the tendon. Transverse sections of the tendons were examined qualitatively at 100x magnification to estimate surface smoothness after 1000 cycles.

RESULTS

There was no significant difference in the gliding resistance between the tendons treated with saline solution and those treated with lubricin alone, or between the tendons treated with cd-HA-gelatin and those treated with cd-gelatin plus lubricin; however, the gliding resistance of the tendons treated with cd-gelatin plus lubricin was significantly lower than that of the tendons treated with saline solution, lubricin alone, or cd-gelatin alone (p < 0.05). After 1000 cycles of tendon motion, the gliding resistance of the tendons treated with cd-gelatin plus lubricin decreased 18.7% compared with the resistance before treatment, whereas the gliding resistance of the saline-solution-treated controls increased >400%. The tendon surfaces treated with cd-gelatin plus lubricin or with cd-HA-gelatin appeared smooth even after 1000 cycles of tendon motion, whereas the other surfaces appeared roughened.

CONCLUSIONS

While the addition of lubricin alone did not affect friction in this tendon gliding model, the results indicate that lubricin may preferentially adhere to a tendon surface pretreated with cd-gelatin and, when so fixed in place, lubricin does have an important effect on tendon lubrication.

The effect of flatfoot deformity and tendon loading on the work of friction measured in the posterior tibial tendon

BACKGROUND

There is limited information regarding the mechanical factors contributing to the progression of posterior tibial tendon dysfunction. Therefore, an investigation of the mechanical forces on the posterior tibial tendon may improve our understanding of this pathology.

METHODS

The gliding resistance and excursion of the posterior tibial tendon in the retromalleolar region was measured in seven cadaveric lower limbs in the coronal, transverse, and sagittal planes. These data were used to calculate the work of friction and to characterize the effect of different tendon loading levels (0.5, 1.0, and 2.0 kg) in the intact and flatfoot conditions.

FINDINGS

Flatfoot deformity significantly increased the excursion of the posterior tibial tendon (P<0.05), increased forefoot and hindfoot range of motion in the coronal and transverse planes (P<0.05) and the work of friction in the coronal and transverse planes (P<0.05), but not in the sagittal plane. There was a significant increase in the work of friction between 0.5 and 2 kg (P<0.05) in all three planes of motion.

INTERPRETATION

The motions in the coronal and transverse planes have a greater effect on the work of friction of the posterior tibial tendon than sagittal plane motion in the flatfoot condition. This study suggests that aggressive treatment of early stage PTT dysfunction with bracing designed to limit coronal and transverse motions, while permitting sagittal motion should be investigated further. Such bracing may decrease the potential of progressive deformity while allowing for more normal ambulation.

Effect of curing time and concentration for a chemical treatment that improves surface gliding for extrasynovial tendon grafts in vitro

The purpose of this study was to evaluate whether treatment time and concentration of these reagents have an effect on the resulting gliding resistance. Forty peroneus longus (PL) tendons were used, from 20 adult mongrel dogs, along with the A2 pulley obtained from the ipsilateral hind paw. After the baseline gliding resistance was measured, the PL tendons were treated with one of three concentrations of hyaluronic acid (HA) and 1-ethyl-3-[3-dimethylaminopropyl] carbodiimide hydrochloride (EDC) or N-hydroxysuccinimide (NHS) mixed with 10% gelatin for various times (5, 30, and 60 min). Tendon friction was measured over 1000 cycles of simulated flexion/extension motion. Gliding resistance of the untreated PL tendons had no significant difference among the groups. After surface treatment with low concentration of HA and EDC/NHS for 5-min cure, the gliding resistance was similar to that of the untreated PL tendon and significantly higher than its 30- and 60-min treatment. For the rest of high concentration of HA and EDC/NHS groups, the gliding resistance was lower than that of untreated PL tendon. However, there was no significant difference among the timing points. It is possible to optimize the effect of surface treatment on friction and durability by regulating cure time and concentration of reagents in a canine extrasynovial tendon in vitro.

Tendon excursion and gliding: Clinical impacts from humble concepts

As integral components of the musculoskeletal system, the primary function is transmission of muscle forces to the skeletal system. Proper excursion and gliding of the tendon determine the efficiency of this function. Studies of the tendon excursion and gliding based on two simple mechanical concepts have resulted in several significant clinical implications.

Gliding Resistance of the Flexor Pollicis Longus Tendon after Repair: Does Partial Excision of the Oblique Pulley Affect Gliding Resistance?

BACKGROUND

After tendon repair, it is critical for the repair site to pass smoothly under the pulley edge to promote gliding and reduce the risk of adhesion or rupture. In this study, the authors assessed the effect of partial excision by "squaring off" the distal edge of the oblique pulley on the gliding resistance of the flexor pollicis longus tendon after repair in vitro.

METHODS

Gliding resistance of 10 human thumbs was measured directly with three different sequential conditions: intact flexor pollicis longus tendon with intact A1 and oblique pulleys (group A), intact pulleys after repair of the tendon (group B), and after repair and excision of the distal triangular part (squaring off) of the oblique pulley (group C).

RESULTS

Gliding resistance increased significantly after repair and squaring off the oblique pulley (group A, 0.22 +/- 0.08 N; group B, 1.29 +/- 0.68 N; and group C, 2.01 +/- 0.84 N).

CONCLUSIONS

Previous studies suggest that the trimming of an annular pulley in the finger would not result in any significant mechanical disadvantage if other parts of the pulley system were intact. However, the authors' results suggest that in the case of the thumb oblique pulley, gliding resistance is increased after trimming and tendon repair, and thus the oblique pulley should be left intact if possible.

Expression and mapping of lubricin in canine flexor tendon

Matrix composition and the biomechanical environment are intimately interdependent in most connective tissues. Lubricin has many distinct biological functions, including lubrication, antiadhesion, and cytoprotection in cartilage, tendons, and other tissues. This study investigated the distribution of lubricin in the canine flexor digitorum profundus (FDP) tendon by immunohistochemistry. Lubricin was found both on the tendon surface and at the interface of collagen fiber bundles within the tendon, where the cells are subjected to shear force in addition to tension and compression. The expression of lubricin in regions of the canine flexor tendon that differ in mechanical or nutritional environment was also investigated using RT-PCR. Six N-terminal splicing variants were identified from six distinct anatomical regions of flexor tendon. The variants with larger sizes were noted in regions subjected to significant shear and compressive forces. Lubricin is ubiquitous in the FDP tendon, with variations in distribution and splicing that appear to correspond to discrete anatomic locations that differ by mechanical or nutritional environment.

Effect of finger ulnar deviation on gliding resistance of the flexor digitorum profundus tendon within the A1 and A2 pulley complex

PURPOSE

To evaluate the effect of ulnar deviation of the finger on gliding resistance of the flexor digitorum profundus tendon within the A1 and A2 pulley complex.

METHODS

Thirty-two human cadaveric fingers (index through small fingers) were used. The gliding resistance was measured at 5 different angles of ulnar deviation (0 degrees, 15 degrees, 30 degrees, 45 degrees, 60 degrees).

RESULTS

There was a significant increase in gliding resistance with increased ulnar deviation. The gliding resistances at 0 degrees, 15 degrees, 30 degrees, 45 degrees, and 60 degrees of ulnar deviation were 0.40+/-0.13 N, 0.44+/-0.13 N, 0.55+/-0.17 N, 0.74+/-0.21 N, and 1.02+/-0.30 N, respectively. The gliding resistance at 60 degrees was significantly greater than at all other angles; 45 degrees ulnar deviation had significantly higher gliding resistance than 0 degrees, 15 degrees, and 30 degrees; and 30 degrees ulnar deviation had significantly higher gliding resistance than 0 degrees.

CONCLUSIONS

A greater angle of ulnar deviation causes higher gliding resistance during motion of the flexor digitorum profundus tendon within the A1 and A2 pulley complex. The gliding resistance increases significantly at angles greater than 30 degrees of ulnar deviation. The increased tendon loading needed to overcome increased gliding resistance caused by ulnar deviation could result in a vicious cycle of progressive ulnar deviation. Although mild degrees of ulnar deviation may be well tolerated mechanically a reasonable therapeutic guideline might be to prevent deviation from exceeding 30 degrees.

The scientific basis for advances in flexor tendon surgery

During the last 40 years, there has been an enormous amount of basic scientific research designed to improve our knowledge of the structure of tendons, the biomechanics of their action, their biologic response to injury and repair, the mechanical characteristics of various tendon suture methods, and the effect of postrepair motion stress on tendon strength and healing. These investigative efforts have given rise to improved methods of tendon repair and protocols for the early application of passive and active wrist and digital motion as a means to more rapidly increase the strength and gliding of repaired tendons. The surgical techniques of hand surgeons and the rehabilitation protocols of hand therapists have improved enormously from these scientific efforts and the results of flexor tendon repair have become much more reliable. This article attempts to review many of the important scientific reports dealing with flexor tendons that have been published during the last three-plus decades and indicate how those works have improved our management of these difficult injuries.

Total and intrasynovial work of flexion of human cadaver flexor digitorum profundus tendons after modified Kessler and MGH repair techniques

PURPOSE

The purpose of this study was to compare directly the total work of flexion (TWOF) and the intrasynovial work of flexion (IWOF) of human flexor digitorum profundus tendons and to analyze the ratio of the IWOF to the TWOF of human flexor digitorum profundus tendons. These factors may be important clinically in understanding the role of different methods of postoperative tendon rehabilitation for different types of tendon repairs, especially at the early stage after tendon repair.

METHODS

Two different tendon repairs, the modified Kessler and the Massachusetts General Hospital, were used in 18 digits from 6 freshly frozen human cadaver hands. The TWOF and the IWOF were tested by using a digit-resistance testing device.

RESULTS

After tendon repair the TWOF increased 11.2% and 26.9% for the modified Kessler and MGH groups, respectively. The differences in increase between the 2 groups were significant. The IWOF increased 126.8% and 308.8% for the modified Kessler and Massachusetts General Hospital groups, respectively. The IWOF accounted for 16.4% of the TWOF for the intact tendon; this percentage was 28.6% and 45.0% for the modified Kessler and Massachusetts General Hospital groups, respectively.

CONCLUSIONS

The IWOF accounts for 16% of the TWOF of normal human cadaver digits but it accounts for a much higher fraction after tendon repair. The ratio of the work of flexion within the synovial sheath to the TWOF varies depending on the type of repair chosen.

Hyaluronic acid diminishes the resistance to excursion after flexor tendon repair: An in vitro biomechanical study

Adhesion between the tendon and tendon sheath after primary flexor tendon repair is seen frequently, and postoperative finger function is occasionally unsatisfactory. A reduction of the friction may facilitate tendon mobilization, which in turn may reduce the risk of the adhesion and restriction of range of motion. We considered the possibility of utilizing the hyaluronic acid (HA) as a lubricant. To evaluate the effect of HA, the gliding resistance between the canine flexor digitorum profundus tendon repaired by a modified Kessler suture technique with running epitendinous suture and the annular pulley located on the proximal phalanx (corresponding to the A2 pulley in humans) was evaluated and compared before and after administration of HA. The HA solution measurement groups were identified as follows; intact tendon as a control; repaired tendon; tendon soaked in 0.1, 1, and 10 mg/ml HA. The resistance increased after repairing, then it decreased after soaking in 10 mg/ml HA solution. The results of this study revealed that HA diminishes the excursion resistance after flexor tendon repair. We believe that some style of administration of the HA might reduce the excursion resistance and prevent adhesion until the synovial surface is fully developed.

Friction of the gliding surface. Implications for tendon surgery and rehabilitation

Finger flexor tendon rehabilitation has come a long way, but further advances are possible. Ideally, a healing tendon should move, but under the minimum load necessary to achieve motion. It is possible to design suture repairs that minimize the friction between tendon and sheath while simultaneously maintaining adequate strength to provide a wide margin of safety during therapy. A looped, four-strand modified Kessler repair is a good example of this type of high-strength, low-friction repair. At the same time, rehabilitation methods can also be optimized. A new modified synergistic motion protocol is described in which wrist flexion and finger extension is alternated with wrist and metacarpophalangeal joint extension and finger interphalangeal joint flexion. Based on evidence from basic science studies, the authors hypothesize that this new protocol will deliver more effective proximal tension on the tendon repair than either passive flexion/active extension or synergistic protocols, and may be useful in patients who are not ready for, or are not reliable with, active motion or place and hold protocols. The scientific basis for these new methods is reviewed, and the concept of the "safe zone" for tendon loading, in which tendon motion occurs without gapping of the repair site, is developed.

Short-term assessment of optimal timing for postoperative rehabilitation after flexor digitorum profundus tendon repair in a canine model

Abstract The purpose of this study was to compare the short-term outcome following flexor tendon repair for postoperative rehabilitation commencing on day 1 (a common clinical choice) versus day 5 (the day on which, with postoperative immobilization, the initial gliding resistance is least in this model) in an in vivo canine model. Work of flexion (WOF) and tendon strength were evaluated following tendon laceration and repair in 24 dogs sacrificed 10 days postoperatively. Starting postoperative mobilization at day 5 resulted in no tendon ruptures compared with tendon ruptures in four of the dogs (33%) in the group subjected to mobilization starting at day 1. While there was no statistically significant difference in WOF between groups at day 10, there was a trend toward lower resistance favoring the day 5 start group, and the statistical power to detect a difference in WOF was diminished by the ruptures in the day 1 group. We conclude that starting rehabilitation on day 5, when initial gliding resistance is lower, may have an advantage over earlier starting times, when surgical edema and other factors increase the initial force requirements to initiate tendon gliding. We plan further studies to evaluate the longer-term benefits of this rehabilitation program.

Effect of gap size on gliding resistance after flexor tendon repair

BACKGROUND

Gap formation is a common complication after flexor tendon repair and is associated with adhesion formation, tendon rupture, and decreased strength. The purpose of this study was to investigate the effect of gap formation on tendon gliding resistance after flexor tendon repair in a human cadaver model.

METHODS

Twelve index, middle, and ring fingers from four adult human cadaveric hands were used. Gliding resistance versus excursion between the flexor digitorum profundus tendon and the A2 pulley was first measured in intact tendons. After full laceration, each tendon was repaired with the Pennington suture technique and the gliding resistance was measured again. Then, the repaired tendon (a 0-mm gap) was stretched to form a 1-mm gap, and gliding resistance was remeasured. A magnified video image was used to monitor gap size. This process was repeated to evaluate gap sizes of 2, 3, and 4 mm at the repair site. Peak gliding resistance was determined, and the peak gliding resistance was compared among the groups.

RESULTS

No significant difference in peak gliding resistance was detected between repaired tendons without a gap and tendons with a 1-mm gap. Repaired tendons with a 2-mm gap could pass through the A2 pulley; however, peak gliding resistance was significantly higher than that for tendons with a 0 or a 1-mm gap (p < 0.05). When the gap reached > or =3 mm, all tendons caught at the A2 pulley edge, causing a dramatically increased peak gliding resistance.

CONCLUSIONS

The presence of a 2-mm gap after flexor tendon repair significantly increased tendon peak gliding resistance (p < 0.05), while a gap of > or =3 mm further increased peak gliding resistance because of catching at the pulley edge.

The effect of partial A2 pulley excision on gliding resistance and pulley strength in vitro

PURPOSE

The purpose of this study was to investigate the effect of partial excision of the A2 pulley on the gliding resistance and the strength of the residual pulleys in a human in vitro model with or without tendon repair.

METHODS

We used 32 cadaveric human fingers from 11 cadavers. The A2 pulley was excised successively 25%, 50%, and 75%, cutting either from the distal toward the proximal edge or from the proximal toward the distal edge. The peak gliding resistance between intact or repaired tendon and partially excised pulley was measured. After the gliding resistance test the pulley breaking strength and stiffness were measured.

RESULTS

The peak gliding resistance exhibited the same statistical trends for the intact tendon and the repaired tendon groups. In the intact tendon groups the sequential excision of the A2 pulley from the distal toward the proximal edge had no significant effect on peak gliding resistance. With the A2 pulley cut from the proximal toward the distal edge, however, there was a significant increase in peak gliding resistance with 25% remaining pulley distally (0.82 N) compared with intact (0.42 N), 75% (0.57 N), and 50% (0.63 N) pulley remaining proximally. The 25% distal portion of the A2 pulley had a significantly higher breaking strength than the 25% proximal portion (160 N vs 96.7 N, respectively). Similarly the stiffness was greater in the distal portion compared with the proximal portion (120 N/mm vs 70.5 N/mm).

CONCLUSIONS

After A2 pulley excision the size and location of the remaining pulley affects the resulting gliding resistance, stiffness, and failure strength. At the most extreme excision level tested the residual 25% distal segment of the pulley exhibited significantly greater peak gliding resistance compared with the 25% proximal segment, as well as greater strength and stiffness. If excision of the A2 pulley is limited to 50% (either proximally or distally), however, there is little increase in gliding resistance and the retained strength of the pulley is substantial. These data support the clinical practice of partial pulley excision, up to a limit of 50%, to facilitate exposure and tendon repair.

Pyramid of progressive force exercises to the injured flexor tendon

Postoperative rehabilitation for patients who have sustained a laceration to their flexor tendon apparatus is an important factor in maximizing functional outcome. Quality rehabilitation is characterized by the development of a tailored exercise regimen. There is currently no model available to tailor an exercise regimen for a person with an atypical physiologic response pattern. If rehabilitation protocols were classified according to the criteria of forces applied across a tendon juncture and/or excursion, and a clinical method were available to assist in the identification of optimal tendon loading and/or excursion application, then those individuals with atypical response patterns could be treated more efficiently and effectively. The author conducted a literature review and case study. A model for systematic application of progressive loading exercises to the intrasynovial flexor tendon injury and repair is conceptually developed. The model consists of a pyramidal series of eight specific rehabilitation exercises in the following sequence: passive protected extension, place and hold, active composite fist, hook and straight fist, isolated joint motion, resistive composite fist, resistive hook and straight fist, and resistive isolated joint motion. Concepts are developed to implement a three-point clinical adhesion-grading system. Clinical application of the system is highlighted. An excellent outcome was considered 112% total active motion. A model for systematic application of progressive loading exercises has been conceptually developed in concert with a method for determination of optimal tendon loading. Further substantiation is necessary to validate the proposed theory.

Adhesion formation after flexor tendon repair: a histologic and biomechanical comparison of 2- and 4-strand repairs in a chicken model

PURPOSE

Both increased handling and increased bulk at the repair site have been hypothesized as affecting adhesion formation and gliding after tendon repair. Tendons repaired with 2- and 4-strand techniques were compared using both biomechanical and histopathologic measurements to determine the influence of increasing strand number on adhesion formation and gliding.

METHODS

The flexor digitorum profundus tendon of the right middle toe of 80 broiler chickens was cut and then repaired with either a single (2-strand) or double (4-strand) modified Kessler core suture, followed by a running epitendinous suture. The limb was immobilized after surgery. Birds were killed at either 3 days or 4 weeks after tendon repair and adhesion formation measured using either biomechanical testing or quantitative and qualitative histology. For biomechanical testing, the tendon was pulled free of the sheath and a force versus displacement curve was generated. Comparisons of peak force and work to peak were made. Histologic specimens were examined by a pathologist blinded to the treatment group who scored the length and density of adhesions and made qualitative observations.

RESULTS

Both biomechanical and histologic data showed expected differences in adhesion formation for early (3 days) and late (4 weeks) healing but no significant differences between 2- and 4-strand repairs. Biomechanical testing of 4-week specimens showed a nonsignificant tendency toward greater work required to break adhesions in 4-strand repairs.

CONCLUSIONS

Adhesion formation and gliding resistance of tendons after 2- or 4-strand modified Kessler core suture were not significantly different, which suggests that simply increasing the number of strands crossing a repair does not necessarily result in more adhesions or resistance in this model.