Factor structure of trunk performance data for healthy subjects

Trunk musculoskeletal response in maximum voluntary exertions: A combined measurement-modeling investigation

Maximum voluntary exertion (MVE) tasks quantify trunk strength and maximal muscle electromyography (EMG) activities with both clinical and biomechanical implications. The aims here are to evaluate the performance of an existing trunk musculoskeletal model, estimate maximum muscle stresses and spinal forces, and explore likely differences between males and females in maximum voluntary exertions. We, therefore, measured trunk strength and EMG activities of 19 healthy right-handed subjects (9 females and 10 males) in flexion, extension, lateral and axial directions. MVEs for all subjects were then simulated in a subject-specific trunk musculoskeletal model, and estimated muscle activities were compared with EMGs. Analysis of variance was used to compare measured moments and estimated spinal loads at the L5-S1 level between females and males. MVE moments in both sexes were greatest in extension (means of 236 Nm in males and 190 Nm in females) and least in left axial torque (97 Nm in males and 64 Nm in females). Being much greater in lateral and axial MVEs, coupled moments reached ∼50% of primary moments in average. Females exerted less moments in all directions reaching significance except in flexion. Muscle activity estimations were strongly correlated with measurements in flexion and extension (Pearson's r = 0.69 and 0.76), but the correlations were very weak in lateral and axial MVEs (Pearson's r = 0.27 and 0.13). Maximum muscle stress was in average 0.80 ± 0.42 MPa but varied among muscles from 0.40 ± 0.22  MPa in rectus abdominis to 0.99 ± 0.29 MPa in external oblique. To estimate maximum muscle stresses and evaluate validity of a musculoskeletal model, MVEs in all directions with all coupled moments should be considered.

Design and evaluation of a novel triaxial isometric trunk muscle strength measurement system

Maximal strength measurements of the trunk have been used to evaluate the maximum functional capacity of muscles and the potential mechanical overload or overuse of the lumbar spine tissues in order to estimate the risk of developing musculoskeletal injuries. A new triaxial isometric trunk strength measurement system was designed and developed in the present study, and its reliability and performance was investigated. The system consisted of three main revolute joints, equipped with torque sensors, which intersect at L5—S1 and adjustment facilities to fit the body anthropometry and to accommodate both symmetric and asymmetric postures in both seated and standing positions. The dynamics of the system was formulated to resolve validly the moment generated by trunk muscles in the three anatomic planes. The optimal gain and offset of the system were obtained using deadweights based on the least-squares linear regression analysis. The R2 results of calibration for all loading courses of all joints were higher than 0.99, which indicated an excellent linear correlation. The results of the validation analysis of the regression model suggested that the mean absolute error and the r.m.s. error were less than 2 per cent of the applied load. The maximum value of the minimum detectable change was found to be 1.63 N m for the sagittal plane torque measurement, 0.8 per cent of the full-scale load. The trial-to-trial variability analysis of the device using deadweights provided intra-class correlation coefficients of higher than 0.99, suggesting excellent reliability. The cross-talk analysis of the device indicated maximum cross-talks of 1.7 per cent and 3.4 per cent when the system was subjected to flexion—extension and lateral bending torques respectively. The trial-to-trial variability of the system during in-vivo strength measurement tests resulted in good to excellent reliability, with intra-class correlation coefficients ranging from 0.69 to 0.91. The results of the maximum voluntary isometric torques exertion measurements for 30 subjects indicated good agreement with the previously published data in the literature. The extensive capabilities and high reliability of the system are promising for more comprehensive investigations on the trunk biomechanics in future, e.g. isometric strength measurement at symmetric and asymmetric postures, muscle endurance, and recruitment pattern analysis.

Spinal flexibility affects range of trunk flexion during performance of a maximum voluntary trunk curl-up

The present study investigated the relationship between spinal flexibility and range of trunk flexion during curl-up performance. Fifty young adult men (age: 18.93 +/- 1.31 years; height: 179.4 +/- 5.7 cm; mass: 73.95 +/- 7.8 kg) performed a spinal flexibility measurement test and a maximum voluntary trunk curl-up from the supine position. The 2 tests were paced to the beat of a metronome and had a constant movement duration set to 5 seconds. Spinal and pelvic motions were recorded with the help of 2 electromagnetic tracking sensors (Flock of Birds, Ascension Technologies, Inc., Burlington, Vt; sampling rate 100 Hz) attached to the seventh cervical (C7) and first sacral (S1) vertebrae, respectively. Correlation and linear regression analyses revealed a significant relationship between spinal flexibility and curl-up performance, with spinal flexibility accounting for 18% of the variance in the range of trunk flexion during performance of the voluntary trunk curl-up. No significant anterior tilt of the pelvis was noted during performance of the trunk curl-up. On the other hand, a minor posterior pelvic rotation depicted during the initial phase of the trunk curl-up was negatively correlated with spinal flexibility. It is concluded that a normal range of spinal flexibility is critical for the optimal performance of abdominal strength training exercises such as trunk curl-ups from the supine position. The results of the present study are relevant to the design and evaluation of training programs for improving strength and function of the abdominal muscles in rehabilitation and sports contexts.

Establishment of a protocol to test fatigue of the trunk muscles

BACKGROUND

Muscle fatigue has high relevance in human performance yet little research has evaluated how it should be assessed.

OBJECTIVE

To perform a pilot study to identify suitable methods of generating and assessing fatigue of the trunk flexor and extensor muscles.

METHODS

Sixteen university rugby players (mean (SEM) age 21.9 (0.2) years) were recruited and subjected to four protocols (A, B, C, D), separated by a week to allow recovery, with peak torque being recorded during each test: A, isokinetic measurements before and after fatigue, with a 10 repetition isokinetic fatigue period; B, isokinetic measurements before and after fatigue with a 45 second isometric fatigue period; C, isometric measurements before and after fatigue with a 10 repetition isokinetic fatigue period; D, isometric measurements before and after fatigue with a 45 second isometric fatigue period. All were conducted during flexion and extension of the trunk on the Cybex Norm Isokinetic Dynamometer trunk flexion-extension unit.

RESULTS

All subjects completed all four protocols. Fatigue induction appeared more effective in flexion than extension. Significant differences in mean peak torque before and after fatigue were seen in protocols A, B, and D in flexion and only in protocol D for extension. In flexion, protocol D produced the greatest fatigue, peak torque being 16.2% less after than before fatigue, suggesting greatest sensitivity.

CONCLUSIONS

Protocol D, which incorporates isometric testing and fatigue protocols, appears to be able to produce fatigue most effectively, and therefore may provide the most valid assessment of fatigue in the trunk flexor and extensor muscles.

Effects of neck extensor muscles fatigue on balance

OBJECTIVE

Measure the effects of cervical extensor muscle isometric contraction on cervical surface electromyographic spectral shift and balance in healthy subjects.

DESIGN

Experimental within-subject design.

BACKGROUND

Postural instability can be induced by mechanically stimulating cervical muscle spindles. Postural changes are also observed in individuals who suffer from chronic neck pain or whiplash injury. Furthermore these subjects appear to experience neck musculature fatigue more quickly, which in turn not only affects the neck function but also seems to affect the balance in a standing posture.

METHODS

Using a force platform, balance was measured, in 10 blindfolded college students before and after isometric voluntary contraction in neck extension at 5% and 25% maximum voluntary isometric contraction for a period of 5, 10 and 15 min. Paired posturographic data were analysed for differences. Control measurements were performed on the same subjects by measuring balance before and after subjects sitting quietly for 5, 10 and 15 min without performing isometric contraction.

RESULTS

The results indicate that a 25% maximal isometric contraction of the neck extensors for 10 and 15 min duration produced significant changes in some posturographic parameters in young healthy males. Furthermore, this contraction also produced a significant cervical muscle electromyography median frequency spectrum shift of the lower frequencies.

CONCLUSIONS

Balance was affected by 15 min of 25% maximal isometric contraction of the extensor cervical muscles. Posturographic parameters affected are similar to parameters observed in subjects that have suffered a whiplash injury.

RELEVANCE

This study contributes to our understanding of functional aspects of cervical muscle fatigue. The similarity of results with other studies performed on subjects suffering from chronic neck pain and from whiplash injuries may suggest a similar cause for loss of postural control. Ultimately, this may help us in developing objective evaluation procedures for subjects suffering from neck complaints.

Principal components analysis as an evaluation and classification tool for lower torso sEMG data

The use of univariate statistical techniques on multivariate electromyography data can fail to uncover important relationships between variables. Principal components analysis (PCA) is a multivariate statistical technique that can be used as a data exploration tool, both by classifying participants and simplifying data structures. Past research using this technique has focused on discriminating between "patients" and "normals". This investigation explored the use of PCA on electromyography data from healthy participants, with the objective of elucidating any between-participant differences in the multivariate patterns of muscle coactivation. Results indicated that, even between healthy participants, quantitative and qualitative differences in muscle coactivation patterns exist and that, in the context of the lower torso, a large portion (>70%) of the empirically determined muscle activation could be synthesized in a theoretical three-parameter control model.