Effect of conditioners on dentin permeability using an impedance method

Age-related changes in ac-impedance spectroscopy studies of normal human dentine: further investigations

One of the age-related changes occurring in dentine structure is the formation of peritubular dentine on the inner walls of dentinal tubules leading to complete closure of tubules. Ac-impedance is safe, fast and non-invasive technique. In the last decade, the popularity of the technique has increased in dental research. Several investigators have used the technique to detect tooth cracks and caries. The results of in vitro studies showed that ac-impedance technique was more advanced for caries detection than visual and radiographic methods. However, other studies demonstrated that the accuracy of impedance measurements can be affected by many factors such as remineralization after tooth eruption. A study has been published on effect of age on impedance measurements by the authors for two age groups by employing ac-impedance spectroscopy. Therefore, the aim of this study was to demonstrate the importance of this technique by conducting further investigations on dentine samples of wider age groups. Dentine samples were prepared from extracted sound third molars of known patient age. The ac-impedance measurements were carried out over a wide range of frequency. After performing all electrical measurements, dentine samples were examined under SEM to correlate the electrical measurements with their structure. Impedance measurements showed that there were differences in impedance between young and old dentine. One-way ANOVA of the means of resistance and capacitance for all age groups (20, 25, 30, 40 and 50 years old dentine) revealed a significant difference (ANOVA, P < 0.0001) as a function of age. Applying Tukey's post hoc test, to the same data showed that this difference was due to the 50 years old dentine for resistance and was due to the 40 and 50 years old dentine for capacitance which were statistically different to all other groups. SEM investigation of dentine samples showed that young dentine is characterized by open dentinal tubules distributed all over the sample while in old dentine most dentinal tubules were occluded by peritubular dentine. It is believed that this peritubular deposition is responsible for differences in impedance measurements. In spite of increasing use of electrical techniques to understand electrical properties of teeth, it is clear from this study that local structural variations have a marked influence.

Monitoring bacterial-demineralization of human dentine by electrochemical impedance spectroscopy

OBJECTIVE

The purpose of this study was two-fold: (1) to monitor bacterial biofilm formation and bacteria-induced demineralization of dentine in situ by using electrochemical impedance spectrum (EIS); (2) to examine the relationship between EIS findings and changes in the chemical composition and ultrastructure of dentine during bacteria-induced demineralization.

METHODS

In this study, dentine demineralization was induced by Streptococcusmutans (ATCC 25175) in the presence of sucrose in culture medium and was monitored using two EIS measurement systems (Type A with a working electrode and Type B without a working electrode). Scanning electron microscopy (SEM), field emission scanning electron microscopy (FESEM), energy dispersive X-ray (EDX) and X-ray diffraction (XRD) were employed to examine the morphology, element contents and crystallinity of hydroxyapatite (HAP) on the dentine surface. Transverse microradiography (TMR) was used to characterize the lesion depth and degree of mineral loss during demineralization.

RESULTS

The resistance of the bulk dentine (R(d)) and the apparent resistance of dentine (R(a)) measured from the Type A and Type B EIS systems, respectively, decreased gradually with demineralization. The resistance of the biofilm formed on dentine surface was determined by fitting the EIS data with equivalent circuits. The presence of biofilm slightly increased R(a) of dentine before demineralization. However, the electrochemical behavior of biofilm did not affect the decreasing impedance of dentine with demineralization. The SEM, EDX, XRD and TMR results demonstrated that the surface and bulk dentine gradually became more porous due to the loss of minerals during demineralization, which in turn resulted in the decrease in R(d) and R(a) values obtained from EIS systems.

CONCLUSIONS

This investigation highlighted EIS as a potential technique to monitor biofilm formation and bacterial-induced demineralization in situ.

Use of electrochemical impedance spectroscopy to evaluate resin-dentin bonds

Electrochemical impedance spectroscopy (EIS) offers a potentially nondestructive quantitative method for measuring the stability of resin films and or resin-bonded dentin over time. The purpose of this study was to measure the electrical impedance of five experimental dental adhesives of increasing hydrophicities as 30-microm films and as resin-bonded coatings on acid-etched dentin. Resin films or resin-coated dentin disks were placed in U-shaped chambers containing pairs of Ag-AgCl electrodes in 0.1M KCl. Electrical impedance spectra were run at day 0, 1, 7, 14, and 21 days. All resin films and resin-bonded dentin showed increases in capacitance during the first day of storage in electrolyte. This was usually associated with an increase in the pore resistance of the resins. Generally, resin-bonded dentin gave lower impedance values than their respective resins (resins 1-4) but solvated resin 5 bonded to water-saturated dentin gave higher capacitance and impedance values than resin 5 films. However, solvated resin 5 films gave higher impedance values than resin 5-bonded dentin. This behavior was confirmed by TEM examinations of silver uptake into films of neat resin 5 vs. ethanol-solvated resin 5, where water tree-like structures seen in the former were not seen in the latter. EIS is useful in examining changes in the capacitance and electrical impedance of very hydrophilic, ionic methacrylate resins. Its utility in detecting degradation in resin-bonded dentin interfaces remains to be determined in longer term studies.

Age-related changes in ac-impedance spectroscopy studies of normal human dentine

Non-destructive methods, such as the ac-impedance technique, have recently been applied to early caries detection and to identify micro-leakage between tooth structure and filling materials. However, in vitro impedance measurements are affected by a number of external factors. The purpose of present study was to investigate the effect of the age of teeth on impedance measurements of human dentine by employing electrical impedance spectroscopy (EIS). Fully hydrated dentine samples were prepared from extracted third molars of 20 and 50 year old patients. Ac-impedance measurements were carried out over a wide frequency range. Impedance measurements showed that there were differences in impedance between young and older dentine. In their circuit models, both resistance and capacitance were found to be significantly different (p < 0.05) for the two age groups. One of the age-related changes in dentine is the formation of peritubular dentine on the inner walls of dentinal tubules and we propose that this is responsible for the differences in impedance. Sample or patient age therefore must be considered when making impedance measurements on any tooth.

Influence of continuous veno-venous hemofiltration on the course of acute pancreatitis

AIM: To investigate whether continuous veno-venous hemofiltration (CVVH) in different filtration rate to eliminate cytokines would result in different efficiency in acute pancreatitis, whether the saturation time of filter membrane was related to different filtration rate, and whether the onset time of CVVH could influence the survival of acute pancreatitis.

METHODS: Thirty-seven patients were classified into four groups randomly. Group 1 underwent low-volume CVVH within 48 h of the onset of abdominal pain (early CVVH, n = 9). Group 2 received low-volume CVVH after 96 h of the onset of abdominal pain (late CVVH, n = 10). Group 3 underwent high-volume CVVH within 48 h of the onset of abdominal pain (early CVVH, n = 9). Group 4 received high-volume CVVH after 96 h of the onset of abdominal pain (late CVVH, n = 9). CVVH was sustained for at least 72 h. Blood was taken before hemofiltration, and ultrafiltrate was collected at the start of CVVH and every 12 h during CVVH period for the purpose of measuring the concentrations of TNF-α, IL-1β and IL-6. The concentrations of TNF-α, IL-1β and IL-6 were measured by swine-specific ELISA. The Solartron 1 255 B frequency response analyzer (British) was used to observe the resistance of filter membrane.

RESULTS: The survival rate had a significant difference (94.44% vs 68.42%, P<0.01) high-volume and low-volume CVVH patients. The survival rate had also a significant difference (88.89% vs 73.68%, P<0.05) between early and late CVVH patients. The hemodynamic deterioration (MAP, HR, CVP) was less severe in groups 4 and 1 than that in group 2, and in group 3 than in group 4. The adsorptive saturation time of filters membranes was 120-180 min if the filtration rate was 1 000-4 000 mL/h. After the first, second and third new hemofilters were changed, serum TNF-α concentrations had a negative correlation with resistance (r: -0.91, -0.89, and -0.86, respectively in group 1; -0.89, -0.85, and -0.76, respectively in group 2; -0.88, -0.92, and -0.82, respectively in group 3; -0.84, -0.87, and -0.79, respectively in group 4). The decreasing extent of TNF-α, IL-1β and IL-6 was significantly different between group 3 and group 1 (TNF-α P<0.05, IL-1β P<0.05, IL-6 P<0.01), between group 4 and group 2 (TNF-α P<0.05, IL-1β P<0.05, IL-6 P<0.01), between group 1 and group 2 (TNF-α P<0.05, IL-1β P<0.05, IL-6 P<0.05), and between group 3 and group 4 (TNF-α P<0.01, IL-1β P<0.01, IL-6 P<0.05), respectively during CVVH period. The decreasing extent of TNF-α and IL-1β was also significantly different between survival patients and dead patients (TNF-α P<0.05, IL-1β P<0.05). In survival patients, serum concentration of TNF-α and IL-1β decreased more significantly than that in dead patients.

CONCLUSION: High-volume and early CVVH improve hemodynamic deterioration and survival in acute pancreatitis patients. High-volume CVVH can eliminate cytokines more efficiently than low-volume CVVH. The survival rate is related to the decrease extent of TNF-α and IL-1β. The adsorptive saturation time of filter membranes are different under different filtration rate condition. The filter should be changed timely once filter membrane adsorption is saturated.

Single-bottle adhesives behave as permeable membranes after polymerization. I. In vivo evidence

OBJECTIVES

This study tested the hypothesis that single-bottle total-etch adhesives are effective in reducing dentine permeability under in vivo conditions.

METHODS

Crown preparations on vital human teeth were performed under local analgesia as part of the treatment plan for prosthetic rehabilitation. Four single-bottle adhesives (Single Bond, 3M ESPE; Excite DSC, Ivoclar Vivadent; Prime and Bond NT Dual-Cure, Dentsply DeTrey and One-Step, Bisco Inc.) were applied to the cut dentine after acid-etching. Polyvinyl siloxane impressions were taken, using an ultra-low viscosity impression material, of the smear layer-covered dentine before applying the adhesives to deep vital dentine, and after adhesive placement. Additional impressions were taken of the adhesive-sealed dentine following the removal of the provisional prostheses after a 7-10 day period. Epoxy resin replicas of the crown preparations were examined with scanning electron microscopy to evaluate the extent of dentinal fluid transudation during pre-bonded, immediately bonded and post-bonded periods.

RESULTS

Dentinal fluid transudation from localised areas that were close to the dental pulp was universally observed from all epoxy resin replicas, irrespective of the adhesive employed. The transudation of dentinal fluid from the control smear layer-covered dentine of each crown preparation was comparatively mild when compared to the extent that was observed after total-etching and application of the single-bottle adhesive. Dentinal fluid droplets were specifically located over the surface of the adhesive layer. Continuous transudation of dentinal fluid occurred even after the removal of the provisional prostheses, and was considerably more profuse in subjects who opted for the fitting of the permanent prostheses without the use of a local anaesthetic solution.

CONCLUSION

Single-bottle adhesives, because of their lack of a comparatively more hydrophobic bonding resin layer, behave as permeable membranes after polymerisation. They permit the continuous transudation of dentinal fluid and do not provide a hermetic seal in vital deep dentine. Although the relatively slow rate of diffusion of dentinal fluid is unlikely to result in post-operative cold sensitivity, it may interfere with the optimal polymerisation of dual-cured or auto-cured composites or resin cements in both direct and indirect restorations.

Evaluation of microleakage of composite resin restorations by an electrochemical technique: the impedance methodology

OBJECTIVES

The aim of our in vitro study was to quantitatively evaluate dentin microleakage by means of the impedance technique.

METHODS

Forty-five 2 mm thick dentin disks were embedded in a hollow polyurethane resin cylinder. The system used was a 'like' permeation cell. Standard cylindrical cavities (1.5 mm deep, 3.5 mm diameter) were prepared on the occlusal side of the disk. The current passing through the dentin was measured to calculate impedance and to establish resistance of the sample. The doses were then randomly divided into nine groups (n = 5). Each group was bounded with a different adhesive system and filled with microhybrid composite resin (Filtek P60). The initial measurement with the empty cavity and the record measurement (t = 0) were performed to evaluate initial resistance after filling. Samples were then thermocycled.

RESULTS

At t = 0, the highest value was obtained with EP (550%), the lowest with PLP (115%). The values of other adhesives ranged in a group (350-450%) without statistical difference. After thermocycling, all groups exhibited no significant difference (350-230%) except PLP (50%). The lower joint degradation rate (5%) was obtained with OS with a significant difference for all systems, the higher with PLP (35%). The results for other adhesives ranged from 20 to 27% without significant difference.

SIGNIFICANCE

Dentin microleakage may be quantified with the impedance technique and this has shown that, except for PLP, the differences between the two families of adhesives are slight. This methodology is able to prove the influence of thermocycling in terms of joint degradation.