Influence of diffusion to fractal surfaces on the binding kinetics for antibody-antigen, analyte-receptor, and analyte-receptorless (protein) systems

Analyte-receptor binding and dissociation kinetics for biosensor applications: a fractal analysis

A fractal analysis of confirmative nature only is presented for analyte-receptor binding and dissociation kinetics for biosensor applications. Data taken from the literature may be modeled, in the case of binding using a single-fractal analysis or a dual-fractal analysis. The dual-fractal analysis represents a change in the binding mechanism as the reaction progresses on the surface. Relationships are presented for the binding and dissociation rate coefficients as a function of their corresponding fractal dimension, Df or the degree of heterogeneity that exists on the surface. When analyte-receptor binding or dissociation is involved, an increase in the heterogeneity on the surface (increase in Df) leads to an increase in the binding and in the dissociation rate coefficient. It is suggested that an increase in the degree of heterogeneity on the surface leads to an increase in the turbulence on the surface owing to the irregularities on the surface. This turbulence promotes mixing, minimizes diffusional limitations, and leads subsequently to an increase in the binding and in the dissociation rate coefficient (Martin S.J., Granstaff, V.E., Frye, G.C., Anal. Chem., 65, (1991) 2910). The binding and the dissociation rate coefficient are rather sensitive to the degree of heterogeneity, Df,bind and Df,diss respectively, that exists on the biosensor surface. For example, the order of dependence on Df,bind is 19.2 for the binding rate coefficient, kbind for the binding of 0.03-1.0 microM SH-2Ld in solution to 2C TCR immobilized on a surface plasmon resonance (SPR) biosensor (Corr, M., Salnetz, A.E., Boyd, L.F., Jelonek, M.T., Khilko, S., Al-Ramadi, B.K., Kim, Y.S., Maher, S.E., Bothwell, A.L.M., Margulies, D.H., Science, 265, (1994) 946). The order of dependence on Df,diss is -6.22 for the dissociation rate coefficient, kdiss for the dissociation of 250-1000 nM Sophora japonica agglutinin (SJA)-lactose complex from the SPR surface. In general, the technique is applicable to other reactions occurring on different types of surfaces, such as cell-surface reactions.

A kinetic study of analyte-receptor binding and dissociation, and dissociation alone, for biosensor applications: a fractal analysis

A fractal analysis is presented for (a) analyte-receptor binding and dissociation kinetics and (b) dissociation kinetics alone for biosensor applications. Emphasis is placed on dissociation kinetics. Data taken from the literature may be modeled, in the case of binding, using a single-fractal analysis or a dual-fractal analysis. The dual-fractal analysis represents a change in the binding mechanism as the reaction progresses on the surface. A single-fractal analysis is adequate to model the dissociation kinetics in the examples presented. Predictive relationships developed for the dissociation rate coefficient(s) as a function of the analyte concentration are of particular value since they provide a means by which the dissociation rate coefficients may be manipulated. Relationships are also presented for the binding and dissociation rate coefficients as a function of their corresponding fractal dimension, D(f), or the degree of heterogeneity that exists on the surface. When analyte-receptor binding or dissociation is involved, an increase in the heterogeneity on the surface (increase in D(f)) leads to an increase in the binding and in the dissociation rate coefficient.

A Fractal Analysis Approach for the Evaluation of Hybridization Kinetics in Biosensors

The diffusion-limited hybridization kinetics of analyte in solution to a receptor immobilized on a biosensor or immunosensor surface is analyzed within a fractal framework. The data may be analyzed by a single- or a dual-fractal analysis. This was indicated by the regression analysis provided by Sigmaplot (Sigmaplot, Scientific Graphing Software, User's Manual, Jandel Scientific, CA, 1993). It is of interest to note that the binding rate coefficient and the fractal dimension both exhibit changes, in general, in the same direction for both the single-fractal and the dual-fractal analysis examples presented. The binding rate coefficient expression developed as a function of the analyte concentration in solution and the fractal dimension is of particular value since it provides a means to better control biosensor or immunosensor performance. Copyright 2001 Academic Press.

A Predictive Approach Using Fractal Analysis for Analyte-Receptor Binding and Dissociation Kinetics for Surface Plasmon Resonance Biosensor Applications

A predictive approach using fractal analysis is presented for analyte-receptor binding and dissociation kinetics for biosensor applications. Data taken from the literature may be modeled, in the case of binding using a single-fractal analysis or a dual-fractal analysis. The dual-fractal analysis represents a change in the binding mechanism as the reaction progresses on the surface. A single-fractal analysis is adequate to model the dissociation kinetics in the examples presented. Predictive relationships developed for the binding and the affinity (k(diss)/k(bind)) as a function of the analyte concentration are of particular value since they provide a means by which the binding and the affinity rate coefficients may be manipulated. Relationships are also presented for the binding and the dissociation rate coefficients and for the affinity as a function of their corresponding fractal dimension, D(f), or the degree of heterogeneity that exists on the surface. When analyte-receptor binding or dissociation is involved, an increase in the heterogeneity on the surface (increase in D(f)) leads to an increase in the binding and in the dissociation rate coefficient. It is suggested that an increase in the degree of heterogeneity on the surface leads to an increase in the turbulence on the surface owing to the irregularities on the surface. This turbulence promotes mixing, minimizes diffusional limitations, and leads subsequently to an increase in the binding and in the dissociation rate coefficient. The binding and the dissociation rate coefficients are rather sensitive to the degree of heterogeneity, D(f,bind) (or D(f1)) and D(f,diss), respectively, that exists on the biosensor surface. For example, the order of dependence on D(f,bind) (or D(f1)) and D(f2) is 6.69 and 6.96 for k(bind,1) (or k(1)) and k(2), respectively, for the binding of 0.085 to 0.339 µM Fab fragment 48G7(L)48G7(H) in solution to p-nitrophenyl phosphonate (PNP) transition state analogue immobilized on a surface plasmon resonance (SPR) biosensor. The order of dependence on D(f,diss) (or D(f,d)) is 3.26 for the dissociation rate coefficient, k(diss), for the dissociation of the 48G7(L)48G7(H)-PNP complex from the SPR surface to the solution. The predictive relationships presented for the binding and the affinity as a function of the analyte concentration in solution provide further physical insights into the reactions on the surface and should assist in enhancing SPR biosensor performance. In general, the technique is applicable to other reactions occurring on different types of biosensor surfaces and other surfaces such as cell-surface reactions. Copyright 2000 Academic Press.

A single- and a dual-fractal analysis of antigen-antibody binding kinetics for different biosensor applications

The diffusion-limited binding kinetics of antigen (or antibody) in solution to antibody (or antigen) immobilized on a biosensor surface is analyzed within a fractal framework. The data is adequately described by a single- or a dual-fractal analysis. Initially, the data was modelled by a single-fractal analysis. If an inadequate fit was obtained then a dual-fractal analysis was utilized. The regression analysis provided by Sigmaplot, 1993 (Scientific Graphing Software: User's Manual. Jandel Scientific, San Rafael, CA) was utilized to determine if a single-fractal analysis is sufficient, or a dual-fractal analysis is required. In general, it is of interest to note that the binding rate coefficient and the fractal dimension exhibit changes in the same direction (except for a single example) for the antigen-antibody systems analyzed. Binding rate coefficient expressions as a function of the fractal dimension developed for the antigen-antibody binding systems indicate a high sensitivity of the binding rate coefficient on the fractal dimension when both a single -as well as a dual-fractal analysis is used. For example, for a single-fractal analysis and for the binding of human endothelin-1 (ET-1) antibody in solution to ET-1(15-21) x BSA (bovine serum albumin) immobilised on a surface plasmon resonance surface, the order of dependence of the binding rate coefficient, k on the fractal dimension, Df is 7.0945. Similarly, for a dual-fractal analysis and for the binding of parasite L. donovani diluted pooled sera in solution to fluorescein isothiocyanate-labeled anti-human immunoglobulin IgG immobilized on an optical fibre, the order of dependence of k1 and k2 on Df1 and Df2 were 6.8018 and -4.393, respectively. Binding rate coefficient expressions are also developed as a function of the analyte (antigen or antibody) concentration in solution. The binding rate coefficient expressions developed as a function of the fractal dimension(s) are of particular value since they provide a means to better control biosensor performance by linking it to the heterogeneity on the surface, and emphasize in a quantitative sense the importance of the nature of the surface in biosensor performance.

A Single and a Dual-Fractal Analysis of Analyte-Receptor Binding Kinetics for Surface Plasmon Resonance Biosensor Applications

The diffusion-limited binding kinetics of analyte in solution to either a receptor immobilized on a surface or to a receptorless surface is analyzed within a fractal framework for a surface plasmon resonance biosensor. The data is adequately described by a single- or a dual-fractal analysis. Initially, the data was modeled by a single-fractal analysis. If an inadequate fit was obtained then a dual-fractal analysis was utilized. The regression analysis provided by Sigmaplot (32) was used to determine if a single fractal analysis is sufficient or if a dual-fractal analysis is required. In general, it is of interest to note that the binding rate coefficient and the fractal dimension exhibit changes in the same direction (except for a single example) for the analyte-receptor systems analyzed. Binding rate coefficient expressions as a function of the fractal dimension developed for the analyte-receptor binding systems indicate, in general, the high sensitivity of the binding rate coefficient on the fractal dimension when both a single- and a dual-fractal analysis is used. For example, for a single-fractal analysis and for the binding of human endothelin-1 (ET-1) antibody in solution to ET-115-21.BSA immobilized on a surface plasmon resonance (SPR) surface (33), the order of dependence of the binding rate coefficient, k, on the fractal dimension, Df, is 6.4405. Similarly, for a dual-fractal analysis and for the binding of 10(-6) to 10(-4) M bSA in solution to a receptorless surface (direct binding to SPR surface) (41) the order of dependence of k1 and k2 on Df1 and Df2 were -2.356 and 6.241, respectively. Binding rate coefficient expressions are also developed as a function of the analyte concentration in solution. The binding rate coefficient expressions developed as a function of the fractal dimension(s) are of particular value since they provide a means to better control SPR biosensor performance by linking it to the degree of heterogeneity that exists on the SPR biosensor surface. Copyright 1999 Academic Press.

Analyte-Receptor Binding Kinetics for Biosensor Applications: A Single-Fractal and a Dual-Fractal Analysis of the Influence of the Fractal Dimension on the Binding Rate Coefficient

The diffusion-limited binding kinetics of antigen (analyte) in solution to antibody (receptor) immobilized on a biosensor surface is analyzed within a fractal framework. Most of the data presented are adequately described by a single-fractal analysis. This was indicated by the regression analysis provided by Sigmaplot ("Scientific Graphing Procedure, User's Manual," Jandel Scientific, San Rafael, CA, 1993). A couple of examples of a dual-fractal analysis are also presented. It is of interest to note that the binding rate coefficient and the fractal dimension both exhibit changes in the same direction for the analyte-receptor systems analyzed. Binding rate coefficient expressions as a function of the fractal dimension developed for the analyte-receptor binding systems indicate the high sensitivity of the binding rate coefficient on the fractal dimension when both a single- and a dual-fractal analysis are used. For example, for a single-fractal analysis and for the binding of cell surface proteins from Helicobacter pylori strain in solution to sialyl-(alpha-2,3)-lactose-conjugated (20 mol%) polyacrylamide immobilized on a resonant mirror biosensor (S. Hirmo et al., Anal. Biochem. 257, 63, 1998), the order of dependence of the binding rate coefficient, k, on the fractal dimension, Df, was 14.15. The fractional order of dependence of the binding rate coefficient(s) on the fractal dimension(s) further reinforces the fractal nature of the system. The binding rate coefficient(s) expressions developed as a function of the fractal dimension(s) are of particular value since they provide a means to better control biosensor performance by linking it to the heterogeneity on the surface and further emphasize in a quantitative sense the importance of the nature of the surface in biosensor performance. Copyright 1998 Academic Press.

An analysis of analyte-receptor binding kinetics for biosensor applications: influence of the fractal dimension on the binding rate coefficient

The diffusion-limited binding kinetics of analyte in solution to receptor immobilized on a biosensor surface is analysed within a fractal framework. Both a single- as well as a dual-fractal analysis are utilized. Antigen-antibody and analyte-receptor systems are analysed. For the antigen-antibody and analyte-receptor systems where a single- or a dual-fractal analysis was used, it is of interest to note that the binding rate coefficient and the fractal dimension exhibit changes in the same direction. The binding rate coefficient expressions obtained as a function of the fractal dimension indicate the high sensitivity of the binding rate coefficient with respect to the fractal dimension. For example, for a single-fractal analysis and for the binding of (a) 1 microM BSA in solution to the anti-BSA-protein fused to a biosensor surface, and for (b) the binding of m-xylene-saturated STE buffer solution to the microorganism immobilized to the fiber-optic end and covered with a polycarbonate membrane, the orders of dependence of the binding rate coefficient on the fractal dimension were 5.535 and 3.314, respectively. This emphasizes the importance of the degree of heterogeneity on the biosensor surface and its impact on the binding rate coefficient, k. This high sensitivity is also indicated for a dual-fractal analysis, at least for the binding rate coefficient, k2. For example, during regeneration runs and for the binding of polymerase chain-reaction amplified DNA in solution to DNA capture protein immobilized on a fiber-optic biosensor, the order of dependence of k2 on Df2 was 3.399. The fractional order of dependence of the binding rate coefficient(s) on the fractal dimension(s) further reinforces the fractal nature of the system. The binding rate coefficient expressions developed as a function of the fractal dimension for both single-fractal analysis and dual-fractal analysis systems are of particular value since they provide a means to better control biosensor performance by linking it to the heterogeneity on the surface. Also, the importance of the nature of the surface on biosensor performance is emphasized in a quantitative sense.

Analyte-receptor binding kinetics for biosensor applications. An analysis of the influence of the fractal dimension on the binding rate coefficient

The diffusion-limited binding kinetics of antigen (analyte), in solution with antibody (receptor) immobilized on a biosensor surface, is analyzed within a fractal framework. Most of the data presented is adequately described by a single-fractal analysis. This was indicated by the regression analysis provided by Sigmaplot. A single example of a dual-fractal analysis is also presented. It is of interest to note that the binding-rate coefficient (k) and the fractal dimension (Df) both exhibit changes in the same and in the reverse direction for the antigen-antibody systems analyzed. Binding-rate coefficient expressions, as a function of the Df developed for the antigen-antibody binding systems, indicate the high sensitivity of the k on the Df when both a single- and a dual-fractal analysis are used. For example, for a single-fractal analysis, and for the binding of antibody Mab 0.5 beta in solution to gp120 peptide immobilized on a BIAcore biosensor, the order of dependence on the Df was 4.0926. For a dual-fractal analysis, and for the binding of 25-100 ng/mL TRITC-LPS (lipopolysaccharide) in solution with polymyxin B immobilized on a fiberoptic biosensor, the order of dependence of the binding-rate coefficients, k1 and k2, on the fractal dimensions, Df1 and Df2, were 7.6335 and -11.55, respectively. The fractional order of dependence of the k(s) on the Df(s) further reinforces the fractal nature of the system. The k(s) expressions developed as a function of the Df(s) are of particular value, since they provide a means to better control biosensor performance, by linking it to the heterogeneity on the surface, and further emphasize, in a quantitative sense, the importance of the nature of the surface in biosensor performance.