Chapter 3 Theory of chromatography

Size-Exclusion Chromatography for the Analysis of Protein Biotherapeutics and their Aggregates

In recent years, the use and number of biotherapeutics has increased significantly. For these largely protein-based therapies, the quantitation of aggregates is of particular concern given their potential effect on efficacy and immunogenicity. This need has renewed interest in size-exclusion chromatography (SEC). In the following review we will outline the history and background of SEC for the analysis of proteins. We will also discuss the instrumentation for these analyses, including the use of different types of detectors. Method development for protein analysis by SEC will also be outlined, including the effect of mobile phase and column parameters (column length, pore size). We will also review some of the applications of this mode of separation that are of particular importance to protein biopharmaceutical development and highlight some considerations in their implementation.

Surface-alkylated polystyrene monolithic columns for peptide analysis in capillary liquid chromatography-electrospray ionization mass spectrometry

Macroporous poly(styrene-divinylbenzene) (PS-DVB) monoliths were prepared by in situ polymerization in PEEK, fused silica, or stainless steel tubing having an inner diameter of 75 or 125 microm. A process is described for subsequent alkylation of the flow-contacting surfaces of the monoliths. The process treats all the surfaces including through-pore surfaces of the rigid macroporous monolith with a solution containing a dissolved Friedel-Crafts catalyst, an alkyl halide (1-chlorooctadecane), and an organic solvent. This process produces an improved reversed-phase liquid chromatographic separation of peptides compared to an unmodified monolithic PS-DVB column. The surface octadecylation is not necessary for a reversed-phase separation of proteins since both unmodified and modified columns provide comparable results. Tryptic protein digests, standard proteins, and standard peptides were used to evaluate the monolithic columns by employing electrospray mass spectrometry detection. Potential applications in proteomics studies by mass spectrometry, which use the alkylated monolithic column engaged onto the nanofabricated electrospray ionization chip, are also discussed.

Probing the inner surface of a capillary with the atomic force microscope

The inner surface of a fused silica capillary for zone electrophoresis was probed by the atomic force microscope (AFM) in the contact mode. Only uncoated surfaces were analyzed, after a simple washing cycle with detergent, NaOH and HCl, and final equilibration in distilled water. Three progressively larger surface areas were probed: 0.5 x 0.5 micron, 2 x 2 microns and 4 x 4 microns. In all cases, it was found that the surface is remarkably smooth, with a median height increasing from 1.3 to 5.6 nm; mean height, from 1.3 to 5.8 nm; root-mean-squared roughness, from 0.35 to 1.5 nm; and average roughness, from 0.28 to 0.67 nm (the lower values referring to the smaller area, the larger to the largest area probed). The lowest "peaks" detected are of the order of 1-2 nm; some scattered peaks as high as 16 nm are occasionally found. It is concluded that the inner surface of a capillary is not a serrate or notchy structure, but is indeed quite smooth. Since the average roughness is comprised within the thickness of the diffuse double layer (> 10 nm) existing on the silica wall as a result of silanol ionization (and, in fact, it is on the average considerably smaller), it is concluded that it cannot possibly influence peak shape and contribute to peak decay in an electrophoretic run.