Electrokinetic effects in membrane pores and the determination of zeta-potential

Metal-coordinated polybenzimidazole membranes with preferential K+ transport

Membranes with fast and selective ion transport are essential for separations and electrochemical energy conversion and storage devices. Metal-coordinated polymers are promising for fabricating ion-conducting membranes with molecular channels, however, the structures and ion transport channels remain poorly understood. Here, we reported mechanistic insights into the structures of metal-ion coordinated polybenzimidazole membranes and the preferential K⁺ transport. Molecular dynamics simulations suggested that coordination between metal ions and polybenzimidazole expanded the free volume, forming subnanometre molecular channels. The combined physical confinement in nanosized channels and electrostatic interactions of membranes resulted in a high K⁺ transference number up to 0.9 even in concentrated salt and alkaline solutions. The zinc-coordinated polybenzimidazole membrane enabled fast transport of charge carriers as well as suppressed water migration in an alkaline zinc-iron flow battery, enabling the battery to operate stably for over 340 hours. This study provided an alternative strategy to regulate the ion transport properties of polymer membranes by tuning polymer chain architectures via metal ion coordination.

Ionic Signal Enhancement by the Space Charge Effect through the DNA Rolling Circle Amplification on the Outer Surface of Nanochannels

DNA species are recognized as a powerful probe for nanochannel analyses to address the issues of specific target recognition and highly efficient signal conversion due to their programmable and predictable Watson-Crick bases. However, in the conventional view, abundant sophisticated DNA structures synthesized by DNA amplification strategies are unsuitable for use in nanochannel analyses owing to their low probability to enter a nanochannel restricted by the smaller opening of the nanochannel, as well as the faint ion signal produced by the steric effect. Here, we present an integrated strategy of nanochannel analyses that combines the target recognitions by encoded rolling circle amplification (RCA) in solution and the ionic signal enhancement by the space charge effect through the immobilization of highly negative-charged RCA amplicons on the outer surface of the nanochannels. Owing to the highly negative-charged RCA amplicons with 100 nm sizes, a sharp increase of ionic current up to 7454% has been achieved. The RCA amplicon triggered by mRNA-21 on the outer surface of the poly(ethylene terephthalate) membrane with a single nanochannel realized the single-base mismatch detection of mRNA-21 with a sensitivity of 6 fM. The DNA amplicon endows the nanochannel with high sensitivity and selectivity that could extend to other applications, such as DNA sequencing, desalination, sieving, and water-energy nexus.

Electrostatic-modulated interfacial polymerization toward ultra-permselective nanofiltration membranes

Interfacial polymerization (IP) is a platform technology for ultrathin membranes. However, most efforts in regulating the IP process have been focused on short-range H-bond interaction, often leading to low-permselective membranes. Herein, we report an electrostatic-modulated interfacial polymerization (eIP) via supercharged phosphate-rich substrates toward ultra-permselective polyamide membranes. Phytate, a natural strongly charged organophosphate, confers high-density long-range electrostatic attraction to aqueous monomers and affords tunable charge density by flexible metal-organophosphate coordination. The electrostatic attraction spatially enriches amine monomers and temporally decelerates their diffusion into organic phase to be polymerized with acyl chloride monomers, triggering membrane sealing and inhibiting membrane growth, thus generating polyamide membranes with reduced thickness and enhanced cross-linking. The optimized nearly 10-nm-thick and highly cross-linked polyamide membrane displays superior water permeance and ionic selectivity. This eIP approach is applicable to the majority of conventional IP processes and can be extended to fabricate a variety of advanced membranes from polymers, supermolecules, and organic framework materials.

•

Electrostatic-modulated interfacial polymerization is proposed for the first time

•

Electrostatic attraction regulates the spatial-temporal distribution of amine monomers

•

Monomer regulation leads to reduced thickness and enhanced cross-linking of membrane

•

Ultrathin and highly cross-linked polyamide membrane displays superior permselectivity

Controllable ion transport by surface-charged graphene oxide membrane

Ion transport is crucial for biological systems and membrane-based technology. Atomic-thick two-dimensional materials, especially graphene oxide (GO), have emerged as ideal building blocks for developing synthetic membranes for ion transport. However, the exclusion of small ions in a pressured filtration process remains a challenge for GO membranes. Here we report manipulation of membrane surface charge to control ion transport through GO membranes. The highly charged GO membrane surface repels high-valent co-ions owing to its high interaction energy barrier while concomitantly restraining permeation of electrostatically attracted low-valent counter-ions based on balancing overall solution charge. The deliberately regulated surface-charged GO membranes demonstrate remarkable enhancement of ion rejection with intrinsically high water permeance that exceeds the performance limits of state-of-the-art nanofiltration membranes. This facile and scalable surface charge control approach opens opportunities in selective ion transport for the fields of water transport, biomimetic ion channels and biosensors, ion batteries and energy conversions.

Electrokinetics in polyelectrolyte grafted nanofluidic channels modulated by the ion partitioning effect

The effects of ion partitioning on the electrokinetics in a polyelectrolyte grafted nanochannel, which is the representative of a soft nanochannel, are analyzed. Earlier studies in this regard have considered low polyelectrolyte layer (PEL) grafting density at the rigid nanochannel wall and, hence, an equal permittivity inside and outside the grafted layer. In order to overcome this shortcoming, the concept of Born energy is revisited. The coupled system of the modified Poisson-Boltzmann and Navier-Stokes equation is solved numerically, going beyond the widely employed Debye-Hückel linearization and low PEL densities. The complex interplay between the hydrodynamics and charge distribution, modulated by the ion partitioning effect, along with their consequent effects on the streaming potential and electrokinetic energy conversion efficiency (EKEC) have been systemically investigated. It has been observed that the ion partitioning effect reduces the EKEC in comparison to the case with equal permittivity up to a certain electrical double layer thickness after which it increases the EKEC. For a high concentration of mobile charges within the PEL, the net gain in the maximum EKEC due to the ion partitioning effect is about 10 fold that of the case when the ion partitioning effect is not considered. We delve into the various scaling regimes in the streaming potential and intriguingly point out the exact location of peaks in efficiency. The present study also reveals the possibility of improvement in streaming potential mediated energy conversion by the use of polyelectrolyte materials, which possess substantially lower dielectric permittivity than the bulk electrolyte.

The critical zeta potential of polymer membranes: how electrolytes impact membrane fouling

The zeta potential of membrane surfaces and the resulting electrostatic interactions are determining factors of membrane fouling. This publication presents the impact of salt concentration and pH value on these interactions.

Electrophoretic interactions between nitrocellulose membranes and proteins: Biointerface analysis and protein adhesion properties

Protein adsorption onto membrane surfaces is important in fields related to separation science and biomedical research. This study explored the molecular interactions between protein, bovine serum albumin (BSA), and nitrocellulose films (NC) using electrokinetic phenomena and the effects of these interactions on the streaming potential measurements for different membrane pore morphologies and pH conditions. The data were used to calculate the streaming ratios of membranes-to-proteins and to compare these values to the electrostatic or hydrophobic attachment of the protein molecules onto the NC membranes. The results showed that different pH and membrane pore morphologies contributes to different protein adsorption mechanisms. The protein adsorption was significantly reduced under conditions where the membrane and protein have like-charges due to electrostatic repulsion. At the isoelectric point (IEP) of the protein, the repulsion between the BSA and the NC membrane was at the lowest; thus, the BSA could be easily attached onto the membrane/solution interface. In this case, the protein was considered to be in a compact layer without intermolecular protein repulsions.

Experimental study of fouling and cleaning of sintered stainless steel membrane in electro-microfiltration of calcium salt particles

Sintered stainless steel (SSS) microfiltration membranes, which served as electrode directly, were used for the experiment of separating Alamin, a calcium salt and protein containing particles, found in dairy processing. Fouling and cleaning of the SSS membranes under the application of an external electric field were studied. The imposed electric field was found, diverging the pH of permeate and retentate. This in turn altered the solubility of the calcium salt and impacted the performance of electro microfiltration membrane. Using electric field as an enhanced cleaning-in-place (CIP) method in back flushing SSS membrane was also studied.

Estimation of zeta potential by electrokinetic analysis of ionic fluid flows through a divergent microchannel

The streaming potential is generated by the electrokinetic flow effect within the electrical double layer of a charged solid surface. Surface charge properties are commonly quantified in terms of the zeta potential obtained by computation with the Helmholtz-Smoluchowski (H-S) equation following experimental measurement of streaming potential. In order to estimate a rigorous zeta potential for cone-shaped microchannel, the correct H-S equation is derived by applying the Debye-Hückel approximation and the fluid velocity of diverging flow on the specified position. The present computation provides a correction ratio relative to the H-S equation for straight cylindrical channel and enables us to interpret the effects of the channel geometry and the electrostatic interaction. The correction ratio decreases with increasing of diverging angle, which implies that smaller zeta potential is generated for larger diverging angle. The increase of Debye length also reduces the correction ratio due to the overlapping of the Debye length inside of the channel. It is evident that as the diverging angle of the channel goes to nearly zero, the correction ratio converges to the previous results for straight cylindrical channel.

Electrokinetic characterization of porous plugs from streaming potential coupled with electrical resistance measurements

The zeta potential of mixed nickel-iron oxide particles is evaluated by a new laboratory instrument. This latter allows the measurement of streaming potential together with the electrical resistance of porous plugs. The conductivity of electrolyte inside plug (pore conductivity) is deduced from electrical resistance measurements and is used together with streaming potential to evaluate the zeta potential by accounting for the surface conduction phenomenon. It is shown that neglecting the surface conduction phenomenon leads to a substantial underestimation of the zeta potential. The coupled measurements of streaming potential and plug electrical resistance yield zeta potential values that are in very good agreement with those obtained by electrophoresis. The densification of the porous plug with increasing pressure increments is put in evidence by the decrease in measured streaming potentials. Electrical resistance measurements make it possible to account for the increase in surface conductivity resulting from the more compacted structure of the plug. By doing so, the calculated zeta potential is found to be virtually independent of the pressure difference involved in streaming potential experiments, whereas the negligence of surface conduction phenomenon leads to a decrease in the apparent zeta potential with increasing pressure level.

Electrokinetic Phenomena in Homogeneous Cylindrical Pores

The electrokinetic phenomena occurring in homogeneous cylindrical pores containing symmetric electrolytes are studied. The local relations for flow in the pores (Nernst-Planck and Navier-Stokes equations) are developed. The analysis includes a numerical solution of the nonlinear Poisson-Boltzmann equation. The integral expressions of the phenomenological coefficients coupling the solvent flow and the electrical current with the hydrostatic pressure and the electrical potential gradients are established and calculated numerically. The mobilities of anions and cations are individually specified and the electroviscous effects as well as the surface conductance are taken into account. Streaming potentials obtained from numerical calculations are compared with results given by classical relations in a range of zeta potentials and electrokinetic radii that may commonly occur in experimental investigation of micro- and ultrafiltration membranes. In this work, it is shown that classical approximated relations can give rise to very misleading conclusions and that the determination of the true zeta potential requires a full analysis (including numerical calculations) of the basic relations for flow and potential distribution in charged pores. Copyright 1999 Academic Press.