Avidin-biotin-immobilized liposome column for chromatographic fluorescence on-line analysis of solute-membrane interactions

Construction and characterization of a truncated tissue factor‑coagulation‑based composite system for selective thrombosis in tumor blood vessels

The selective induction of tumor vascular thrombosis using truncated tissue factor (tTF) delivered via a target ligand is a promising novel antitumor strategy. In the present study, an anti-neuropilin-1 (NRP-1) monoclonal antibody (mAb)-streptavidin (SA):tTF-biotin (B) composite system was established. In this system, anti-NRP-1-mAb located tTF to the tumor vascular endothelial cell surface and induced vascular embolization. Due to their high binding affinity, SA and B were used to enhance thrombogenic activity. mAb was conjugated with SA using a coupling method with water-soluble 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide and N-hydroxysulfosuccinimide. Biotinylated tTF (tTF-B) was prepared using a B-labeling kit subsequent to the generation and purification of fusion protein tTF. Confocal microscopy and flow cytometry indicated that the anti-NRP-1-mAb-SA conjugate retained mAb targeting activity. The preservation of B-conjugate binding capacity was confirmed using a competitive ELISA, and factor X-activation analysis revealed that tTF-B retained the procoagulant activity exhibited by tTF. Live imaging was performed to assess mAb-SA distribution and tumor-targeting capability, and this yielded promising results. The results of in vivo studies in mice with subcutaneous xenografts demonstrated that this composite system significantly induced tumor vascular thrombosis and inhibited tumor growth, whereas these histological changes were not observed in normal organs.

Interaction between Antibacterial Peptide Apep10 and Escherichia coli Membrane Lipids Evaluated Using Liposome as Pseudo-Stationary Phase

Liposomes constructed from Escherichia coli membrane lipids were used as a pseudo-stationary phase in capillary electrophoresis and immobilised liposome chromatography to evaluate the interaction between antibacterial peptide (ABP) Apep10 and bacterial membrane lipids. The peptide mobility decreased as the concentration of liposomes increased, providing evidence for the existence of this interaction. The binding constant between Apep10 and the Escherichia coli membranes lipid liposome was higher than that of Apep10 with a mixed phospholipids liposome at the same temperature. The capillary electrophoresis results indicate that the binding ability of Apep10 with a liposome was dependent on the liposome’s lipid compositions. Thermodynamic analysis by immobilised liposome chromatography indicated that hydrophobic and electrostatic effects contributed to the partitioning of Apep10 in the membrane lipids. The liposomes constructed from bacterial membrane lipid were more suitable as the model membranes used to study dynamic ABP/membrane interactions than those constructed from specific ratios of particular phospholipids, with its more biomimetic phospholipid composition and contents. This study provides an appropriate model for the evaluation of ABP-membrane interactions.

Multi-liposomal containers

Small unilamellar liposomes, 40-60 nm in diameter, composed of anionic diphosphatidylglycerol (cardiolipin, CL(2-)) or phosphatidylcerine (PS(1-)) and zwitter-ionic egg yolk lecithin (EL) or dipalmitoylphosphatidylcholine (DPPC), electrostatically complex with polystyrene microspheres, ca. 100 nm in diameter, grafted by polycationic chains ("spherical polycationic brushes", SPBs). Polymer/liposome binding studies were carried out using electrophoretic mobility (EPM), dynamic light scattering (DLS), fluorescence, conductometry, differential scanning calorimetry (DSC), and cryogenic transmission electron microscopy (cryo-TEM) as the main analytical tools. By these means a remarkably detailed picture emerges of molecular events inside a membrane. The following are among the most important conclusions that arose from the experiments: (a) binding of liposomes to SPBs is accompanied by flip-flop of anionic lipids from the inner to the outer leaflet of the liposomal membrane along with lateral lipid segregation into "islands". (b) The SPB-induced structural reorganization of the liposomal membrane, together with the geometry of anionic lipid molecules, determines the maximum molar fraction of anionic lipid (a key parameter designated as ν) that ensures the structural integrity of liposomes upon complexation: ν=0.3 for liposomes with conically-shaped CL(2-) and ν=0.5 for liposomes with anionic cylindrically-shaped PS(1-). (c) The number of intact liposomes per SPB particle varies from 40 for (ν=0.1) to 13 (ν=0.5). (d) By using a mixture of liposomes with variety of encapsulated substances, multi-liposomal complexes can be prepared with a high loading capacity and a controlled ratio of the contents. (e) In order to make the mixed anionic liposomes pH-sensitive, they are additionally modified by 30 mol% of a morpholinocyclohexanol-based lipid that undergoes a conformational flip when changing pH. Being complexed with SPBs, such liposomes rapidly release their contents when the pH is reduced from 7.0 to 5.0. The results allow loaded liposomes to be concentrated within a rather small volume and, thereby, the preparation of multi-liposomal containers of promise in the drug delivery field.

Highly stabilized, polymer-lipid membranes prepared on silica microparticles as stationary phases for capillary chromatography

The ability to rapidly screen complex libraries of pharmacological modulators is paramount to modern drug discovery efforts. This task is particularly challenging for agents that interact with lipid bilayers or membrane proteins due to the limited chemical, physical, and temporal stability of conventional lipid-based chromatographic stationary phases. Here, we describe the preparation and characterization of a novel stationary phase material composed of highly stable, polymeric-phospholipid bilayers self-assembled onto silica microparticles. Polymer-lipid membranes were prepared by photochemical or redox initiated polymerization of 1,2-bis[10-(2',4'-hexadieoyloxy)decanoyl]-sn-glycero-2-phosphocholine (bis-SorbPC), a synthetic, polymerizable lipid. The resulting polymerized bis-SorbPC (poly(bis-SorbPC)) stationary phases exhibited enhanced stability compared to particles coated with 1,2-dioleoyl-sn-glycero-phosphocholine (unpolymerized) phospholipid bilayers when exposed to chemical (50 mM triton X-100 or 50% acetonitrile) and physical (15 min sonication) insults after 30 days of storage. Further, poly(bis-SorbPC)-coated particles survived slurry packing into fused silica capillaries, compared to unpolymerized lipid membranes, where the lipid bilayer was destroyed during packing. Frontal chromatographic analyses of the lipophilic small molecules acetylsalicylic acid, benzoic acid, and salicylic acid showed >44% increase in retention times (P<0.0001) for all analytes on poly(bis-SorbPC)-functionalized stationary phase compared to bare silica microspheres, suggesting a lipophilic retention mechanism. Phospholipid membrane-functionalized stationary phases that withstand the chemical and physical rigors of capillary LC conditions can substantially increase the efficacy of lipid membrane affinity chromatography, and represents a key advance toward the development of robust membrane protein-functionalized chromatographic stationary phases.

Stabilized phospholipid membranes in chromatography: toward membrane protein-functionalized stationary phases

Transmembrane protein (TMP)-functionalized materials have resulted in powerful new methods in chemical analysis. Of particular interest is the development of high-throughput, TMP-functionalized stationary phases for affinity chromatography of complex mixtures of analytes. Several natural and synthetic phospholipids and lipid mimics have been used for TMP reconstitution, although the resulting membranes often lack the requisite chemical and temporal stability for long-term use, a problem that is exacerbated in flowing separation systems. Polymerizable lipids with markedly increased membrane stability and TMP functionality have been developed over the past two decades. More recently, these lipids have been incorporated into a range of analytical methods, including separation techniques, and are now poised to have a significant impact on TMP-based separations. Here, we describe current methods for preparing TMP-containing stationary phases and examine the potential utility of polymerizable lipids in TMP affinity chromatography.

Cholesterol--a biological compound as a building block in bionanotechnology

Cholesterol is a molecule with many tasks in nature but also a long history in science. This feature article highlights the contribution of this small compound to bionanotechnology. We discuss relevant chemical aspects in this context followed by an overview of its self-assembly capabilities both as a free molecule and when conjugated to a polymer. Further, cholesterol in the context of liposomes is reviewed and its impact ranging from biosensing to drug delivery is outlined. Cholesterol is and will be an indispensable player in bionanotechnology, contributing to the progress of this potent field of research.

Characterization of protein-membrane binding interactions via a microplate assay employing whole liposome immobilization

Protein-cell membrane binding interactions control numerous vital biological processes, many of which can go awry during disease onset. However, the study of these events is complicated by the complexity of the membrane bilayer. These efforts would benefit from a rapid and easily accessible method for characterizing protein-membrane recognition events. Herein, we describe a microplate-based method for the detection of protein-membrane binding that employs whole liposome immobilization using a biotin anchor. First, control studies are detailed to test for nonspecific liposome immobilization (fluorescence assay; see Subheading 3.2), and to ensure that liposomes remain intact on the microplate surface (dye leakage assay; see Subheading 3.3). Finally, a protein-membrane binding detection assay is described through the example of protein kinase Cα binding to surface-immobilized whole liposomes (see Subheading 3.4).

Microplate-based analysis of protein-membrane binding interactions via immobilization of whole liposomes containing a biotinylated anchor

Cellular membranes play key roles in the regulation of a range of important biological processes. However, the characterization of membrane involvement in these events is difficult to achieve due to the complexity of the membrane bilayer and the challenges associated with handling and analyzing these systems. As such, rapid and reliable approaches for characterizing membrane-based processes are necessary. To address this issue, we have first developed an azide-tagged modular lipid anchor scaffold (2) that can be conveniently derivatized via click chemistry to functionalize the membrane surface. This was used to access biotin- and fluorescein-lipid conjugates 1a and 1b, respectively. These compounds were then employed to perform and characterize the immobilization of liposomes containing biotin-anchor 1a onto streptavidin-coated microplates. Results from these studies indicated clean, biotin-dependent surface deposition. This strategy for liposome attachment was then applied to a microplate-based platform to detect the binding of receptor proteins to immobilized liposomes, specifically for the membrane binding of protein kinase Calpha (PKCalpha). The resulting data indicated direct detection of binding to the membrane-functionalized surface. The reported approaches provide efficient methods for the derivatization of the membrane surface, which is applicable to the study of membrane-based processes. Finally, the described microplate-based liposome binding assay allows for high-throughput analysis of important protein-membrane binding events.

Immobilization of liposomes onto quartz crystal microbalance to detect interaction between liposomes and proteins

To study the interaction between liposomes and proteins, intact liposomes were immobilized on a metal planar support by chemical binding and/or bioaffinity using a quartz crystal microbalance (QCM). A large decrease in the resonance frequency of quartz crystal was observed when the QCM, modified by a self-assembled monolayer (SAM) of carboxythiol, was added to liposome solutions. The stable chemical immobilization of intact liposomes onto SAM was judged according to the degree with which adsorbed mass depended on the prepared size of liposomes, as well as on the activation time of SAMs when amino-coupling was introduced, where the liposome coverage of electrodes was 69+/-8% in optimal conditions. When avidin-biotin binding was used on amino-coupling liposome layers, liposome immobilization finally reached 168% coverage of the electrode surface. Denatured protein was also successfully detected according to the change in the frequency of the liposome-immobilized QCM. The adsorbed mass of denatured carbonic anhydrase from bovine onto immobilized liposomes showed a characteristic peak at a concentration of guanidine hydrochloride that corresponded to a molten globule-like state of the protein, although the mass adsorbed onto deactivated SAM increased monotonously.

Detection of polychlorinated biphenyls using an antibody column in tandem with a fluorescent liposome column

Phospholipase A2 (PLA2)-catalyzed membrane leakage can be detected by immobilized liposomes containing a self-quenching fluorescent dye, 3,3-bis[N,N-di(carboxymethyl)aminomethyl]fluorescein (calcein). This enzymatic reaction was applied as signal amplification for biosensor detection of low concentrations of polychlorinated biphenyls (PCBs). In order to increase the fluorescent signal for improvement of PCBs detection, the effect of BSA on optimal lipid composition for PLA2-catalyzed membrane leakage from fluorescent liposomes has been investigated in this report. Various kinds of calcein-entrapped liposomes were immobilized in Sephacryl S1000 gel beads using avidin-biotin binding. In a contrast, free calcein was removed by size exclusion chromatography on Sephacryl S300 for free liposome suspensions. The PLA2-catalyzed membrane leakage was detected both in these gel-bead-immobilized liposomes and in free liposome suspensions. In both systems, the fluorescent release from the liposomes by PLA2 hydrolytic action significantly increased with increasing albumin concentration. The most rapid and greatest membrane leakage by PLA2 hydrolysis was found in anionic liposomes in the presence of albumin, both in free liposome suspensions and gel-bead-immobilized liposomes. Finally, the stabilities of various free liposomes and gel-bead-immobilized liposomes were monitored. Immobilized 1-palmitoy-2-oleoylphosphatidylcholine (POPC)/1-palmitoy-2-oleoylphosphatidylglycerol (POPG) liposome gel was chosen due to its excellent stability and large dye leakage by PLA2. A concentration of PCBs as low as 0.1 ng/mL was detectable using this tandem column system.

Immobilized liposome chromatography to study drug-membrane interactions. Correlation with drug absorption in humans

For rapid screening of drug-membrane interactions and predicting drug absorption in vivo, unilamellar liposomes were stably immobilized in the pores of gel beads by avidin-biotin binding. Interactions of a diverse set of well-described drugs with the immobilized liposomal membranes were reflected by their elution profiles. The membrane partitioning coefficients (KLM) of the drugs were determined from the retention volumes. The drug retentions on egg phosphatidylcholine (EPC)-phosphatidylserine (PS)-cholesterol (chol) and EPC-PS-phosphatidylethanolamine (PE)-chol columns intended to mimic small intestine membranes were similar, although the positively-charged drugs were more strongly retarded on the negatively-charged liposomes than the negatively-charged drugs. The relationship between log KLM with the drug fraction absorbed in humans showed that the log KLM values obtained with unilamellar liposomes can be used to predict drug passive transcellular absorption, similarly to that previously shown for entrapped multilamellar liposomes. The immobilized liposome chromatography method should be useful for screening compounds at an early stage of the drug discovery process. The avidin-biotin immobilization of the liposomes prolongs the lifetime of the columns.

Phospholipase A(2)-catalyzed membrane leakage studied by immobilized liposome chromatography with online fluorescent detection

Unilamellar liposomes composed of phosphatidylcholine with an entrapped self-quenching fluorescent dye, calcein, were immobilized in chromatographic gel beads by avidin-biotin binding. Bee venom phospholipase A(2) (PLA(2)) was applied in a small amount onto the immobilized liposome column. The release of calcein from the immobilized liposomes resulting from the catalyzed hydrolysis of the phospholipids was detected online by immobilized liposome chromatography (ILC) using a flow fluorescent detector. The PLA(2)-catalyzed membrane leakage of the immobilized liposomes as studied with ILC was found to be affected by the gel pore size used for immobilization, by liposome size, and as expected by the concentration of calcium, but was unaffected by the flow rate of ILC. The largest PLA(2)-induced calcein release from the liposome column was detected on large unilamellar liposomes immobilized on TSK G6000PW or Sephacryl S-1000 gel in the presence of 1 mM Ca(2+) in the aqueous mobile phase. Comparison with the PLA(2)-catalyzed membrane leakage in free liposome suspensions, we conclude that the fluorescent leakage from liposomes hydrolyzed by PLA(2) can be rapidly and sensitively detected by ILC runs using large amount of immobilized liposomes with entrapped fluorescent dye.