Application of a semipermeable surface column for the determination of amoxicillin in human blood serum

Development and Validation of Ecofriendly HPLC-MS Method for Quantitative Assay of Amoxicillin, Dicloxacillin, and Their Official Impurity in Pure and Dosage Forms

Novel, accurate, selective, and rapid high-performance liquid chromatography mass spectrometry method was developed for simultaneous analysis of amoxicillin trihydrate, dicloxacillin sodium, and their official impurity 6-aminopenicillanic acid. The chromatographic separation was carried out by applying the mixture on a C₁₈ column (3.5 µm ps, 100 mm × 4.6 mm id) using acetonitrile:water (65 : 35 by volume) as a mobile phase within only 4 min. The quantitative analysis was executed using single quadrupole mass spectrometer in which electrospray ionization, selected ion monitoring, and negative mode were operated. The retention times were 1.61, 2.54, and 3.50 mins for amoxicillin, 6-aminopenicillanic acid, and dicloxacillin, respectively. The method was validated in linear ranges of 2-28 µg mL^-1, 2-35 µg mL^-1, and 1-10 µg mL^-1 for amoxicillin, dicloxacillin, and 6-aminopenicillanic acid, respectively. The results obtained from the suggested HPLC/MS were statistically compared with those obtained from the reported HPLC method, where no significant difference appeared respecting accuracy and precision. According to the analytical eco-scale assessment method, the proposed method was proved to be greener than the reported one, where the analysis time and the amount of the wasted effluent decreased.

Development and Validation of a Solid-Phase Extraction-Liquid Chromatographic Method for Determination of Amoxicillin in Plasma

A bioanalytic method for the determination of amoxicillin in plasma by hydrophilic interaction solid-phase extraction and liquid chromatography has been developed and validated. Plasma was precipitated with acetonitrile before samples were loaded onto a zwitterionic hydrophilic interaction liquid chromatography (ZIC-HILIC) solid-phase extraction column. Amoxicillin was analyzed by liquid chromatography on an Aquasil (150 x 4.6 mm) LC column with mobile-phase acetonitrile: phosphate buffer (pH 2.5; 0.1 mol/L) (7:93, v/v) and UV detection at 230 nm. A regression model using 1/concentration weighting was found the most appropriate for quantification. The intraassay precision for plasma was 3.3% at 15.0 microg/mL and 10.9% at 0.200 microg/mL. The interassay precision for plasma was 1.8% at 15.0 microg/mL and 7.5% at 0.200 microg/mL. The total-assay precision for plasma over 4 days using a total of 20 replicates was 13.2%, 5.5%, and 3.8% at 0.200 microg/mL, 3.00 microg/mL, and 15.0 microg/mL, respectively. The lower limit of quantification and the limit of detection were 0.050 microg/mL and 0.025 microg/mL, respectively, for 100 microL plasma. Long-term storage stability studies of amoxicillin in plasma indicate that a temperature of -80 degrees C is necessary to prevent degradation of amoxicillin.

Restricted access materials and large particle supports for on-line sample preparation: an attractive approach for biological fluids analysis

An analytical process generally involves four main steps: (1) sample preparation; (2) analytical separation; (3) detection; and (4) data handling. In the bioanalytical field, sample preparation is often considered as the time-limiting step. Indeed, the extraction techniques commonly used for biological matrices such as liquid-liquid extraction (LLE) and solid-phase extraction (SPE) are achieved in the off-line mode. In order to perform a high throughput analysis, efforts have been engaged in developing a faster sample purification process. Among different strategies, the introduction of special extraction sorbents, such as the restricted access media (RAM) and large particle supports (LPS), allowing the direct and repetitive injection of complex biological matrices, represents a very attractive approach. Integrated in a liquid chromatography (LC) system, these extraction supports lead to the automation, simplification and speeding up of the sample preparation process. In this paper, RAM and LPS are reviewed and particular attention is given to commercially available supports. Applications of these extraction supports, are presented in single column and column-switching configurations, for the direct analysis of compounds in various biological fluids.

Determination of amoxycillin in human plasma by direct injection and coupled-column high-performance liquid chromatography

This work reports the use of multidimensional HPLC by coupling a restricted access medium (RAM) bovine serum albumin (BSA) octadecyl column (100 x 4.6 mm I.D., 10 microm particle size and 120 A pore size) to an octadecyl Hypersil column (150 x 4.6 mm I.D., 5 microm particle size and 120 A pore size) to the analysis of amoxycillin in human plasma by direct injection. Ion pairing was necessary to extract amoxycillin with good recovery from the plasma proteins. To prepare the spiked samples, aliquots (60 microl) of the appropriated standard solutions were added to each culture tube containing an 180 microl of plasma and a solution of 0.30 mM tetrabuthylammonium phosphate (60 microl). They were vortexed for 15 s and then 290 microl were transferred to autosampler vials. Aliquots (250 microl) of the spiked plasma samples were injected to a column-switching HPLC system. An analysis time of 25 min with no time spent on sample preparation was achieved. The developed method showed good selectivity, sensitivity, accuracy and precision for direct analysis of this polar low wavelength ultraviolet absorption antibiotic using only 180 microl of human plasma. The validated method proved to be reliable and sensitive for the determination of amoxycillin in plasma samples of five healthy volunteers to whom test and reference formulations were administered as an oral dose (500 mg).

Kinetic spectrophotometric determination of ampicillin and amoxicillin in dosage forms

A kinetic spectrophotometric method has been developed for the determination of ampicillin (I) and amoxicillin (II). The method involves hydrolysis of the antibiotics with 1.0 M HCl, neutralization with 1.0 M NaOH followed by addition of palladium(II) chloride in the presence of 2 M KCl. The produced yellow colour is measured at 335 nm. The proposed method is valid over the concentration range 8-40 microg/ml and 10-40 microg/ml for I and II respectively with minimum detectability of 0.73 microg/ml and 0.76 microg/ml for I and II respectively. The determination of the studied compounds adopting the fixed concentration method is feasible with the calibration equations obtained, but the fixed time method has been found to be more applicable. The proposed method was applied to commercial dosage forms and the results obtained were in good agreement with those given by USP method.