Purification of human adenosine deaminase for the preparation of a reference material

Human adenosine deaminase as an allosteric modulator of human A(1) adenosine receptor: abolishment of negative cooperativity for [H](R)-pia binding to the caudate nucleus

It has been shown that adenosine deaminase (ADA; EC 3.5.4.4) behaves as an ecto-enzyme anchored to membrane proteins, among them A(1) adenosine receptors (A(1)Rs). Bovine ADA interacts with A(1)Rs from many species and regulates agonists binding to receptors in an activity-independent form. However, it was not known whether human ADA exerted any effect on the agonist binding to human A(1)Rs, because of both technical difficulties in obtaining pure human ADA and tissues containing human A(1)Rs. In this study, human ADA was purified to homogeneity. Taking in consideration that A(1)Rs form homodimers and taking advantage of a new procedure to fit binding data to receptors dimers, which allows to calculate ligand dissociation constants and the degree of cooperativity between the two subunits in the dimer, here it is demonstrated that human ADA markedly enhances the agonist and antagonist affinity and abolishes the negative cooperativity on agonist binding to human striatal A(1)Rs. ADA also increases the ability of the agonist to decrease the forskolin-induced cAMP levels. The results show that human ADA, apart from reducing the adenosine concentration and thus preventing A(1)R desensitization, binds to A(1)R behaving as an allosteric effector that markedly enhances agonist affinity and increases receptor functionality. The physiological role of the interaction is to make receptors more sensitive to adenosine. This powerful regulation has important implications for the physiology and pharmacology of neuronal A(1)Rs.

Adenosine ecto-deaminase (ecto-ADA) from porcine cerebral cortex synaptic membrane

We have purified and investigated the role of adenosine ecto-deaminase (ecto-ADA) in porcine brain synaptic membranes and found a low activity of ecto-ADA in synaptic preparations from the cerebral cortex, hippocampus, striatum and medulla oblongata in the presence of purine transport inhibitors (NBTI, dipyridamole and papaverine). The purification procedure with affinity chromatography on epoxy-Toyopearl gel/purine riboside column as a crucial step of purification allowed a 214-fold purification of synaptic ecto-ADA with a yield of 30%. Gel filtration chromatography revealed a molecular mass estimated at 42.4+/-3.9 kDa. The enzyme had a broad optimum pH and was not affected by mono- and divalent cations. Ecto-ADA revealed a low affinity to adenosine (Ado) and 2'-deoxyadenosine (2'-dAdo) (K(M)=286.30+/-40.38 microM and 287.14+/-46.50 microM, respectively). We compared the affinity of ecto-ADA to the substrates with the physiological and pathological concentrations of the extracellular Ado in brains that do not exceed a low micromolar range even during ischemia and hypoxia, and with the affinity of adenosine receptors to Ado not exceeding a low nanomolar (A(1) and A(2A) receptors) or low micromolar (A(2B) and A(3)) range. Taken together, our data suggest that the role of synaptic ecto-ADA in the regulation of the ecto-Ado level in the brain and in the termination of adenosine receptor signaling is questionable. The porcine brain synapses must have other mechanisms for the ecto-Ado removal from the synaptic cleft and synaptic ecto-ADA may also play an extra-enzymatic role in cell adhesion and non-enzymatic regulation of adenosine receptor activity.

Molecular dynamics simulation studies of the conformation and lateral mobility of a charged adsorbate biomolecule: Implications for estimating the critical value of the radius of a pore in porous media

The conformations, the values of the lateral transport coefficient of a charged biomolecule (desmopressin) in the adsorbed layer and in the liquid layers above the adsorbed layer, the potential energies of the interaction between the biomolecules located in different liquid layers with the charged solid surface and with the biomolecules in the adsorbed layer, the potential energies of the interaction between water molecules in the hydration layers surrounding the conformations of the biomolecules in different layers, as well as the structure and number of hydration layers between the different conformations of desmopressin, were determined by molecular dynamics simulation studies. The results show that the lateral mobility of the adsorbed desmopressin is approximately equal to zero and the value of the lateral transport coefficient of the biomolecule in the liquid layers located above the adsorbed layer increases as the distance of the liquid layer from the charged solid surface increases. But the values of the lateral transport coefficient of the biomolecule in the liquid layers above the adsorbed layer are lower in magnitude than the value of the transport coefficient of desmopressin along the direction normal to the charged solid surface in the liquid phase located above the vacant charged sites of the solid surface, and these differences in the values of the transport coefficients have important implications with respect to the replenishment of the biomolecules in the inner parts of a channel (pore), the overall rate of adsorption, and the form of the constitutive equations that would have to be used in macroscopic models to describe the mechanisms of mass transfer and adsorption in the pores of adsorbent media. Furthermore, a novel method is presented in this work that utilizes the information about the sizes of the conformations of the biomolecule in the adsorbed layer and in the liquid layers above the adsorbed layer along the direction that is normal to the charged solid surface, as well as the number and size of the hydration layers along the same direction, and could be used to estimate the value of the lower bound of the linear characteristic dimension of a pore (i.e., pore radius) in porous adsorbent media (e.g., porous adsorbent particles; skeletons of porous monoliths) in order to realize effective transport and overall adsorption rate.

Preparation and characterization of prototypes for multi-modal separation media aimed for capture of negatively charged biomolecules at high salt conditions

Several prototypes of multi-modal ligands suitable for the capture of negatively charged proteins from high conductivity (28 mS/cm) mobile phases were coupled to Sepharose 6 Fast Flow. These new prototypes of multi-modal anion-exchangers were found by screening a diverse library of multi-modal ligands and selecting anion-exchangers resulting in elution of test proteins at high ionic strength. Candidates were then tested with respect to breakthrough capacity of BSA in a buffer adjusted to a high conductivity (20 mM Piperazine and 0.25 M NaCl, pH 6.0). The recovery of BSA was also tested with a salt step (from 0.25 to 2.0 M NaCl using 20 mM Piperazine as buffer, pH 6.0) or with a pH-step to pH 4.0. We have found that non-aromatic multi-modal anion-exchange ligands based on primary or secondary amines (or both) are optimal for the capture of proteins at high salt conditions. Furthermore, these new multi-modal anion-exchange ligands have been designed to take advantage not only of electrostatic but also hydrogen bond interactions. This has been accomplished through modification of the ligands by the introduction of hydroxyl groups in the proximity of the ionic group. Experimental evidence on the importance of the relative position of the hydroxyl groups on the ligand in order to improve the breakthrough capacity of BSA has been found. Compared to strong anion-exchangers such as Q Sepharose Fast Flow the new multi-modal weak anion-exchangers have breakthrough capacities of BSA at mobile phases of 28 mS/cm and pH 6.0 that are 20-30 times higher. The new multi-modal anion-exchangers can also be used at normal anion-exchange conditions and with either a salt step or a pH-step to acidic pH can accomplish the elution of proteins. In addition, the functional performance of the new anion-exchangers was found to be intact after treatment in 1.0 M sodium hydroxide solution for 1 week. A number of multi-modal anion-exchange ligands based on aromatic amines exhibiting high breakthrough capacity of BSA have been found. With these ligands recovery was often found to be low due to strong non-electrostatic interactions. However, for phenol derived anion-exchange media the recovery can be improved by desorption at high pH.

Microcalorimetric studies of the interaction mechanisms between proteins and Q-sepharose at pH near the isoelectric point (pI) effects of NaCl concentration, pH value, and temperature

This study examined the interaction mechanisms of beta-lactoglobulins A and B (Lg A, Lg B) with an anion exchanger, Q-Sepharose at pH near the isoelectric point at which the proteins are expected to be electrically neutralized under various NaCl concentrations and temperatures by the equilibrium binding analysis and the adsorption enthalpy directly measured by isothermal titration calorimetry. The data evaluated from isotherms fitted by the Langmuirean model reveal that the addition of NaCl considerably reduced the binding affinities and capacities of both the proteins with Q-Sepharose at pH 5.2, indicating that electrostatic forces are dominant during the adsorption. However, the hydrophobic interaction seems to be involved in adsorption as well at a higher NaCl concentration, and the adsorption enthalpies confirm this suggestion. In addition, the effects of temperature on the equilibrium binding behaviors for Lg A or Lg B with Q-Sepharose were found to be salt concentration-dependent, probably due to their different binding mechanisms at 0.03 M and 0.3 M NaCl. Where, at 0.3 M NaCl, the hydrophobic interaction plays a more pronounced role. This implication was again supported by the adsorption enthalpies. The presented data provide further insight to the interaction mechanisms between proteins and ion exchangers, facilitating the optimization of protein separations.

Production and certification of an enzyme reference material for adenosine deaminase 1 (BCR 647)

BACKGROUND

We describe the preparation of a lyophilised reference material containing purified human adenosine deaminase 1 and the certification of its catalytic concentration.

METHODS

The enzyme was purified from human erythrocytes.

RESULTS

The enzyme was >99% pure on polyacrylamide gel electrophoresis. Only trace amounts (<0.4%) of alanine aminotransferase, aspartate aminotransferase and L-lactate dehydrogenase were detected in the purified fraction. The purified adenosine deaminase had a molar mass of 41600 g/mol and an isoelectric pH at 4.7, 4.85 and 5.0. The material was prepared by diluting the purified adenosine deaminase in a matrix containing 50 mmol/l Tris-HCl buffer pH 7.4 and 30 g/l human serum albumin; dispensing in vials and freeze-drying. The batch was homogeneous and the predicted loss of adenosine deaminase activity per year on the basis of accelerated degradation studies was 0.006% at -20 degrees C and 0.04% at 4 degrees C. The certified value for adenosine deaminase catalytic concentration in the reconstituted reference material is (2.55+/-0.09) microkat/l when measured by the method that uses adenosine as substrate and glutamate dehydrogenase as auxiliary enzyme at 37 degrees C.

CONCLUSIONS

The material can be used to verify the comparability of results from different laboratories, for intra-laboratory quality control, or for calibration of the adenosine deaminase catalytic concentration measurements.