Advanced separation methods for collagen parent alpha-chains, their polymers and fragments

Age-Dependent Effects of Copper Toxicity on Connective Tissue Structural Stability in Wistar Rats Skin

Over the last three decades, there has been increasing global concern over the public health impacts attributed to direct and indirect environmental pollution, in particular, the global burden of disease. The World Health Organization estimates that, about a quarter of the diseases facing mankind today occur due to prolonged exposure to environmental pollution; the health of 200 million people in lower-income countries is at risk from toxins such as lead and copper or mercury, more than from AIDS, tuberculosis and malaria combined and that, nearly a quarter of deaths in developing countries including Nigeria and Ghana, are linked to pollution. The purpose of the study was to investigate the effects of the ingestion of large dose of copper on the structural stability of collagen molecules, as well as reveal age-dependent differences in the phenomena.  The content of de novo synthesized collagen was determined by hydroxyproline concentration using Stegmann-Staeder's method as modified by Utevskaya and Persky; the nature of intra- and inter-molecular covalent cross-links in collagen matrix was estimated by electrophoretic separation of products of partial thermal denaturation of collagen in polyacrylamide gel. There was intensification of synthesis over degradation in young rats, and that administration of copper led to a decrease in collagen solubility. Effects of copper on the structural stability of collagen appeared mostly in young rats.

Development of 3D printed fibrillar collagen scaffold for tissue engineering

Collagen is widely used in tissue engineering because it can be extracted in large quantities, and has excellent biocompatibility, good biodegradability, and weak antigenicity. In the present study, we isolated printable collagen from bovine Achilles tendon and examined the purity of the isolated collagen using sodium dodecyl sulfate polyacrylamide gel electrophoresis. The bands obtained corresponded to α₁, α₂ and β chains with little contamination from other small proteins. Furthermore, rheological measurements of collagen dispersions (60 mg per ml of PBS) at pH 7 revealed values of viscosity of 35.62 ± 1.42 Pa s at shear rate of 10 s - 1 and a shear thinning behavior. Collagen gels and solutions can be used for building scaffolds by three-dimensional (3D) printing. After designing and fabricating a low-cost 3D printer we assayed the collagen printing and obtaining 3D printed scaffolds of collagen at pH 7. The porosity of the scaffold was 90.22% ± 0.88% and the swelling ratio was 1437% ± 146%. The microstructure of the scaffolds was studied using scanning electron microscopy, and a porous mesh of fibrillar collagen was observed. In addition, the 3D printed collagen scaffold was not cytotoxic with cell viability higher than 70% using Vero and NIH 3 T3 cells. In vitro evaluation using both cells lines demonstrated that the collagen scaffolds had the ability to support cell attachment and proliferation. Also a fibrillar collagen mesh was observed after two weeks of culture at 37 °C. Overall, these results are promising since they show the capability of the presented protocol to obtain printable fibrillar collagen at pH 7 and the potential of the printing technique for building low-cost biocompatible 3D plotted structures which maintained the fibrillar collagen structure after incubation in culture media without using additional strategies as crosslinking.

Acetic acid and pepsin result in high yield, high purity and low macrophage response collagen for biomedical applications

Collagen based devices are frequently associated with foreign body response. Although several pre- (e.g. species, state of animal, tissue) and post- (e.g. cross-linking, scaffold architecture) extraction method factors have a profound effect on foreign body response, little is known about which and how during the extraction process factors mediate foreign body response. In this study, we assessed the influence of acetic acid and hydrochloric acid and the utilisation or not of pepsin or salt precipitation during collagen extraction on the yield, purity, free amines, denaturation temperature, resistance to collagenase degradation and macrophage response. Acetic acid/pepsin extracted collagen exhibited the highest yield, purity and free amine content and the lowest denaturation temperature. No differences in resistance to collagenase digestion were detected between the groups. Although all treatments exhibited similar macrophage morphology comprised of round cells (M1 phenotype), elongated cells (M2 phenotype) and cell aggregates (foreign body response), significantly more elongated cells were observed on HC films. Although no differences in metabolic activity were observed between the groups, the DNA concentration was significantly lower for the hydrochloric acid treatments. Further, cytokine analysis revealed that hydrochloric acid treatments induced significantly higher IL-1β and TNF-α release with respect to acetic acid treatments. Salt precipitation did not influence the parameters assessed. Collectively, these data suggest that during the collagen extraction process variables should also be monitored as, evidently, they affect the physicochemical and biological properties of collagen preparations.

Magnetic poly(2-hydroxyethyl methacrylate) microspheres for affinity purification of monospecific anti-p46 kDa/Myo1C antibodies for early diagnosis of multiple sclerosis patients

The aim of the present study is to develop new magnetic polymer microspheres with functional groups available for easy protein and antibody binding. Monodisperse macroporous poly(2-hydroxyethyl methacrylate) (PHEMA-COOH) microspheres ~4 µm in diameter and containing ∼1 mmol COOH/g were synthesized by multistep swelling polymerization of 2-hydroxyethyl methacrylate (HEMA), ethylene dimethacrylate (EDMA), and 2-[(methoxycarbonyl)methoxy]ethyl methacrylate (MCMEMA), which was followed by MCMEMA hydrolysis. The microspheres were rendered magnetic by precipitation of iron oxide inside the pores, which made them easily separable in a magnetic field. Properties of the resulting magnetic poly(2-hydroxyethyl methacrylate) (mgt.PHEMA) particles with COOH functionality were examined by scanning and transmission electron microscopy (SEM and TEM), static volumetric adsorption of helium and nitrogen, mercury porosimetry, Fourier transform infrared (FTIR) and atomic absorption spectroscopy (AAS), and elemental analysis. Mgt.PHEMA microspheres were coupled with p46/Myo1C protein purified from blood serum of multiple sclerosis (MS) patients, which enabled easy isolation of monospecific anti-p46/Myo1C immunoglobulin G (IgG) antibodies from crude antibody preparations of mouse blood serum. High efficiency of this approach was confirmed by SDS/PAGE, Western blot, and dot blot analyses. The newly developed mgt.PHEMA microspheres conjugated with a potential disease biomarker, p46/Myo1C protein, are thus a promising tool for affinity purification of antibodies, which can improve diagnosis and treatment of MS patients.

Proteins and their modifications in a medieval mummy

Proteins and their modifications of the natural mummy of Cangrande della Scala (Prince of Verona, Northern Italy, 1291-1329) were studied. The nano-LC-Q-TOF analysis of samples of rib bone and muscle from the mummy showed the presence of different proteins including Types I, III, IV, V, and XI collagen, hemoglobin (subunits alpha and beta), ferritin, biglycan, vitronectin, prothrombin, and osteocalcin. The structure of Type I and Type III collagen was deeply studied to evaluate the occurrence of modifications in comparison with Type I and Type III collagen coming from tissues of recently died people. This analysis showed high percentage of asparaginyl and glutaminyl deamidation, carbamylation and carboxymethylation of lysine, as well as oxidation and dioxidation of methionine. The most common reaction during the natural mummification process was oxidation-the majority of lysine and proline of collagen Type I was hydroxylated whereas methionine was oxidated (oxidated or dioxidated). To the best of our knowledge, this is the first study which reports the protein profile of a natural mummified human tissue and the first one which describes the carbamylation and carboxymethylation of lysine in mummified tissues.

Multiphoton microscopy analysis of extracellular collagen I network formation by mesenchymal stem cells

Collagen I is the major fibrous extracellular component of bone responsible for its ultimate tensile strength. In tissue engineering, one of the most important challenges for tissue formation is to get cells interconnected via a strong and functional extracellular matrix (ECM), mimicking as closely as possible the natural ECM geometry. Still missing in tissue engineering are: (a) a versatile, high-resolution and non-invasive approach to evaluate and quantify different aspects of ECM development within engineered biomimetic scaffolds online; and (b) deeper insights into the mechanism whereby cellular matrix production is enhanced in 3D cell-scaffold composites, putatively via enhanced focal adhesion linkage, over the 2D setting. In this study, we developed sensitive morphometric detection methods for collagen I-producing and bone-forming mesenchymal stem cells (MSCs), based on multiphoton second harmonic generation (SHG) microscopy, and used those techniques to compare collagen I production capabilities in 2D- and 3D-arranged cells. We found that stimulating cells with 1% serum in the presence of ascorbic acid is superior to other medium conditions tested, including classical osteogenic medium. In contrast to conventional 2D culture, having MSCs packed closely in a 3D environment presumably stimulates cells to produce strong and complex collagen I networks with defined network structures (visible in SHG images) and improves collagen production. Copyright © 2015 John Wiley & Sons, Ltd.

MMP inhibition as a potential method to augment the healing of skeletal muscle and tendon extracellular matrix

The extracellular matrix (ECM) of skeletal muscle and tendon is composed of different types of collagen molecules that play important roles in the transmission of forces throughout the body, and in the repair and regeneration of injured tissues. Fibroblasts are the primary cells in muscle and tendon that maintain, repair, and modify the ECM in response to mechanical loading, injury, and inactivity. Matrix metalloproteinases (MMPs) are enzymes that digest collagen and other structural molecules, which are synthesized and excreted by fibroblasts. MMPs are required for baseline ECM homeostasis, but disruption of MMP regulation due to injury or disease can alter the normal ECM architecture and prevent proper force transmission. Chronic injuries and diseases of muscles and tendons can be severely debilitating, and current therapeutic modalities to enhance healing are quite limited. This review will discuss the mechanobiology of MMPs, and the potential use of MMP inhibitors to improve the treatment of injured and diseased skeletal muscle and tendon tissue.

Isolation, characterization and biological evaluation of jellyfish collagen for use in biomedical applications

Fibrillar collagens are the more abundant extracellular proteins. They form a metazoan-specific family, and are highly conserved from sponge to human. Their structural and physiological properties have been successfully used in the food, cosmetic, and pharmaceutical industries. On the other hand, the increase of jellyfish has led us to consider this marine animal as a natural product for food and medicine. Here, we have tested different Mediterranean jellyfish species in order to investigate the economic potential of their collagens. We have studied different methods of collagen purification (tissues and experimental procedures). The best collagen yield was obtained using Rhizostoma pulmo oral arms and the pepsin extraction method (2–10 mg collagen/g of wet tissue). Although a significant yield was obtained with Cotylorhiza tuberculata (0.45 mg/g), R. pulmo was used for further experiments, this jellyfish being considered as harmless to humans and being an abundant source of material. Then, we compared the biological properties of R. pulmo collagen with mammalian fibrillar collagens in cell cytotoxicity assays and cell adhesion. There was no statistical difference in cytotoxicity (p > 0.05) between R. pulmo collagen and rat type I collagen. However, since heparin inhibits cell adhesion to jellyfish-native collagen by 55%, the main difference is that heparan sulfate proteoglycans could be preferentially involved in fibroblast and osteoblast adhesion to jellyfish collagens. Our data confirm the broad harmlessness of jellyfish collagens, and their biological effect on human cells that are similar to that of mammalian type I collagen. Given the bioavailability of jellyfish collagen and its biological properties, this marine material is thus a good candidate for replacing bovine or human collagens in selected biomedical applications.

Identification of collagen types in tissues using HPLC-MS/MS

A method for the determination and quantification of collagen types I-V in rat tissues has been developed. This method is based on collagen fragmentation by cyanogen bromide followed by trypsin digestion. After that, HPLC-MS/MS (HPLC coupled to an IT mass spectrometer) analyses of the resulting peptide mixtures (peptide maps) were performed. Specific peptides for each collagen type were selected. According to online databases, these peptides are present in human, bovine, and rat collagens. As a result, this method can be potentially applied to other species' tissues as well, such as human tissues, and provides a universal and simple method of quantifying collagen types. The applicability of this method for analyzing collagen types was demonstrated on rat tissues (skin, tendon, and aorta).

Capillary electromigration methods for the study of collagen

This review paper gives an overview of capillary electromigration methods used in the analysis of collagen. Analyses of the parent chains as well as of the bromcyane and collagenase fragments of collagens are presented. Methods include capillary zone electrophoresis, capillary gel electrophoresis, micellar electrokinetic chromatography as well as combinations of HPLC and capillary electrophoresis, and capillary electrophoresis with mass spectrometry.

Preparative procedures and purity assessment of collagen proteins

Collagens represent a large family (25 members identified so far) of closely related proteins. While the preparative procedures for the members that are ubiquitous and present in tissues in large quantities (typically fibre and network forming collagens types I, II, III, IV and V) are well established, the procedures for more recently discovered minor collagen types, namely those possessing large non-collagenous domain(s) in their molecule, are mostly micropreparative and for some collagenous proteins even do not exist. The reason is that the proof of their existence is based on immunochemical staining of tissue slices and nucleic database searching. Methods of preparation and identification of constituting alpha-polypeptide chains as well as collagenous and non-collagenous domains are also reviewed. Methods for revealing non-enzymatic posttranslational modifications (particularly of the fibre forming collagen types) are briefly described as well.

Interaction of surfactants with homologous series of peptides studied by reversed-phase thin-layer chromatography

The relative strength of interaction between anionic (SDS) and nonionic surfactant (octaethoxylated oleyl alcohol, GEN) and homologous series of peptides was determined by reversed-phase thin-layer chromatography (RP-TLC) carried out on alumina layers impregnated with paraffin oil. The relative strength of interaction was calculated and was correlated with the physicochemical parameters of peptides. It was established that each peptide interacted with both surfactants and with their mixture (1:1, m/m). The relative strength of interaction depended on the number of amino acid units in the peptide, side chain bulk and electronic properties and hydrophobicity of the amino acids. The impact of individual parameters highly depended on the character of surfactant. The data prove that the retention order of peptides can be modified by adding different surfactants and surfactant mixtures to the mobile phase resulting in improved separation.

Application of Pluronic copolymer liquid crystals for the capillary electrophoretic separation of collagen type I cyanogen bromide fragments

A capillary electrophoretic method exploiting the properties of Pluronic copolymer liquid crystals (F127) was developed for the separation of collagen cyanogen bromide (CNBr) fragments. The separations obtained were at least comparable (if not better) to those obtained by other methods applicable to this category of compounds. In the optimized version a bare silica capillary [47 cm (40 cm to the detector) x 75 microm I.D.] was used with 10 mM Tris and 75 mM phosphate buffer (pH 2.5) containing 7.5% Pluronic F127 copolymer. The separation mechanism which involves both the molecular sieving and surfactant properties of the Pluronic F127 gel phase is discussed.