Covalent coupling of asparagus pea and tomato lectins to poly(lactide) microspheres

Mesenchymal Stem Cell Capping on ECM-Anchored Caspase Inhibitor-Loaded PLGA Microspheres for Intraperitoneal Injection in DSS-Induced Murine Colitis

Mesenchymal stem cells (MSCs) are considered as a promising alternative for the treatment of various inflammatory disorders. However, poor viability and engraftment of MSCs after transplantation are major hurdles in mesenchymal stem cell therapy. Extracellular matrix (ECM)-coated scaffolds provide better cell attachment and mechanical support for MSCs after transplantation. A single-step method for ECM functionalization on poly(lactic-co-glycolic acid) (PLGA) microspheres using a novel compound, dopamine-conjugated poly(ethylene-alt-maleic acid), as a stabilizer during the preparation of microspheres is reported. The dopamine molecules on the surface of microspheres provide active sites for the conjugation of ECM in an aqueous solution. The results reveal that the viability of MSCs improves when they are coated over the ECM-functionalized PLGA microspheres (eMs). In addition, the incorporation of a broad-spectrum caspase inhibitor (IDN6556) into the eMs synergistically increases the viability of MSCs under in vitro conditions. Intraperitoneal injection of the MSC-microsphere hybrid alleviates experimental colitis in a murine model via inhibiting Th1 and Th17 differentiation of CD4⁺ T cells in colon-draining mesenteric lymph nodes. Therefore, drug-loaded ECM-coated surfaces may be considered as attractive tools for improving viability, proliferation, and functionality of MSCs following transplantation.

Effect of cross-linker glutaraldehyde on gastric digestion of emulsified albumin

Human serum albumin (HSA) has been shown to be an ideal protein for nanoparticle preparation. These are usually prepared by using cross linker agents such as glutaraldehyde (GAD). Liquid lipid nanocapsules (LLN) constitute a new generation of nanoparticles more biocompatible and versatile for oral delivery of lipophylic drugs. The first barrier that an orally administered formulation must cross is the gastrointestinal tract. Hence, it is crucial to address the impact of gastrointestinal digestion on these structures in order to achieve an optimal formulation. This study evaluates the effect of gastric digestion on HSA emulsions structured with GAD as a model substrate for the preparation of LLN. This is done by SDS-PAGE, emulsion microstructure, and interfacial tension techniques. Our results demonstrate that the cross- linking procedure with GAD strongly inhibits pepsin digestion by formation of inter- and/or intramolecular covalent bonds between substrate amino acids. Emulsification of HSA also protects from gastric digestion probably by the orientation of the HSA molecule, which exposes the majority of pepsin cleaving sites preferably to the hydrophobic part of the oil-water interface. In this emulsified HSA, cross-linking with GAD at the interface promotes structural modifications on the HSA interfacial layer, restricting the access of pepsin to cleavage sites. We identify interfacial aspects underlying enzymatic hydrolysis of the protein. Assuring that HSA-GAD structures resist passage through the gastric compartment is crucial is important towards the rational design of oral delivery systems and the first step to get the complete digestion profile.

Poly(lactic acid) nanoparticles coated with combined WGA and water-soluble chitosan for mucosal delivery of β-galactosidase

A combinatorial design, physical adsorption of water-soluble chitosan (WSC) to particle surface and covalent conjugation of wheat germ agglutinin (WGA) to WSC, was applied to surface modification of poly(lactic acid) nanoparticles (NPs) for targeted delivery of β-galactosidase to the intestinal mucosa. All the surface-engineered NPs in the size range of 500-600 nm were prepared by a w/o/w solvent diffusion/evaporation technique. β-Galactosidase encapsulated in these NPs was well protected from external proteolysis and exerted high hydrolytic activity on the permeable lactose. The presence of WSC coating, whether alone or with WGA, highly improved the suspension stability of NPs and tailored the particle surface positively charged. In comparison to NPs modified with WGA or WSC alone, the synergistic action of WGA and WSC greatly enhanced the NP-mucin interactions in vitro. The highest amount of NPs was found in the small intestine at 24 h after oral administration in rats. Notably, calculated half-life of WGA-WSC-NPs in the small intestine was 6.72 h, resulting in 2.1- and 4.3-fold increase when compared to WGA-polyvinylalcohol (PVA)-NPs and WSC-NPs, much longer than that of control PVA-NPs (6.9-fold). These results suggest that NPs with the combined WGA and WSC coating represent promising candidates for efficient mucosal drug delivery as well as biomimetic treatment of lactose intolerance.

Drug delivery strategies in the therapy of inflammatory bowel disease

Inflammatory bowel disease (IBD) is a frequently occurring disease in young people, which is characterized by a chronic inflammation of the gastrointestinal tract. The therapy of IBD is dominated by the administration of anti-inflammatory and immunosuppressive drugs, which suppress the intestinal inflammatory burden and improve the disease-related symptoms. Established treatment strategies are characterized by a limited therapeutical efficacy and the occurrence of adverse drug reactions. Thus, the development of novel disease-targeted drug delivery strategies is intended for a more effective therapy and demonstrates the potential to address unmet medical needs. This review gives an overview about the established as well as future-oriented drug targeting strategies, including intestine targeting by conventional drug delivery systems (DDS), disease targeted drug delivery by synthetic DDS and disease targeted drug delivery by biological DDS. Furthermore, this review analyses the targeting mechanisms of the respective DDS and discusses the possible field of utilization in IBD.

Triggering effect of N-acetylglucosamine on retarded drug release from a lectin-anchored chitosan nanoparticles-in-microparticles system

The aim of this study was to investigate the use of N-acetylglucosamine (NAG) to accelerate drug release from a lectin-modified carrier. A wheat germ agglutinin (WGA)-anchored salmeterol xinafoate (SalX)-loaded nanoparticles-in-microparticles system (NiMS) was prepared with an ionotropic gelation technique combined with a spray drying method. The formulated microparticles were spherical, with diameters ranging mainly from 2 to 8 μm; the drug entrapment efficiency was >70% (w/w), and the loading capacity was approximately 8% (w/w). Drug release from WGA-SalX-NiMS, within the first 4h, was approximately 30% less than that from SalX-NiMS, indicating an effect of lectin-modification to retard drug release from the NiMS. Due to "sugar-lectin" interactions, drug release from WGA-SalX-NiMS was substantially increased after the addition of NAG to the release medium. However, no significant influence of NAG was observed on the drug release profile of SalX-NiMS without WGA anchorage. The characteristics of NAG-WGA interaction may provide valuable insights into the "triggering-effects" of specific sugars on drug release from lectin-anchored carriers. These results suggest that it is possible to control drug release from a lectin-anchored drug delivery system using a specific sugar, and that the designed novel WGA-SalX-NiMS may be a suitable formulation for chronotherapy of asthma.

Thiol functionalized polymethacrylic acid-based hydrogel microparticles for oral insulin delivery

In the present study thiol functionalized polymethacrylic acid-polyethylene glycol-chitosan (PCP)-based hydrogel microparticles were utilized to develop an oral insulin delivery system. Thiol modification was achieved by grafting cysteine to the activated surface carboxyl groups of PCP hydrogels (Cys-PCP). Swelling and insulin loading/release experiments were conducted on these particles. The ability of these particles to inhibit protease enzymes was evaluated under in vitro experimental conditions. Insulin transport experiments were performed on Caco-2 cell monolayers and excised intestinal tissue with an Ussing chamber set-up. Finally, the efficacy of insulin-loaded particles in reducing the blood glucose level in streptozotocin-induced diabetic rats was investigated. Thiolated hydrogel microparticles showed less swelling and had a lower insulin encapsulation efficiency as compared with unmodified PCP particles. PCP and Cys-PCP microparticles were able to inhibit protease enzymes under in vitro conditions. Thiolation was an effective strategy to improve insulin absorption across Caco-2 cell monolayers, however, the effect was reduced in the experiments using excised rat intestinal tissue. Nevertheless, functionalized microparticles were more effective in eliciting a pharmacological response in diabetic animal, as compared with unmodified PCP microparticles. From these studies thiolation of hydrogel microparticles seems to be a promising approach to improve oral delivery of proteins/peptides.

Albumin-based nanoparticles as magnetic resonance contrast agents: I. Concept, first syntheses and characterisation

To develop a platform for molecular magnetic resonance imaging, we prepared gadolinium-bearing albumin-polylactic acid nanoparticles in the size range 20-40 nm diameter. Iterative cycles of design and testing upscaled the synthesis procedures to gram amounts for physicochemical characterisation and for pharmacokinetic testing. Morphological analyses showed that the nanoparticles were spheroidal with rough surfaces. Particle sizes were measured by direct transmission electron microscopical measurements from negatively contrasted preparations, and by use of photon correlation spectroscopy; the two methods each documented nanoparticle sizes less than 100 nm and generally 10-40 nm diameter, though with significant intrabatch and interbatch variability. The particles' charge sufficed to hold them in suspension. HSA retained its tertiary structure in the particles. The nanoparticles were stable against turbulent flow conditions and against heat, though not against detergents. MRI imaging of liquid columns was possible at nanoparticle concentrations below 10 mg/ml. The particles were non-cytotoxic, non-thrombogenic and non-immunogenic in a range of assay systems developed for toxicity testing of nanoparticles. They were micellar prior to lyophilisation, but loosely structured aggregated masses after lyophilisation and subsequent resuspension. These nanoparticles provide a platform for further development, based on non-toxic materials of low immunogenicity already in clinical use, not expensive, and synthesized using methods which can be upscaled for industrial production.

Lectin-conjugated PLGA nanoparticles loaded with thymopentin: Ex vivo bioadhesion and in vivo biodistribution

The conjugation of lectins onto PLGA nanoparticles has been demonstrated to effectively improve the intestinal absorption of thymopentin. In this study, thymopentin-loaded nanoparticles made from fluorescein isothiocyanate labeled PLGA were modified with wheat germ agglutinin (WGA). The specific bioadhesion of nanoparticles on rat intestinal mucosa was studied ex vivo. An important increase of interaction between WGA-conjugated nanoparticles and the intestinal segments was observed compared with that of the unconjugated one (p<0.05). Fluorescence photomicrographs confirmed the bioadhesion of WGA-conjugated nanoparticles on intestinal villous epithelium as well as Peyer's patches. Biodistribution of nanoparticles was evaluated using tissues obtained from rats, to which nanoparticles were orally administered. The highest amount of WGA-conjugated nanoparticles was detected in small intestine, suggesting an increase of intestinal bioadhesion and endocytosis. The systemic uptake was as high as 6.48-13.4% of dose at 1 day and 7.32-15.26% at 7 days, which representing an increase of almost 1.4-3.1 fold across the intestine compared to <4.9% of the unconjugated one. The enhanced uptake was related to the increasing of WGA density on nanoparticles. These results further revealed the promising potential of lectin-conjugated nanoparticles on the improvement of intestinal bioadhesion and absorption for oral drug delivery.

Preparation and evaluation of lectin-conjugated PLGA nanoparticles for oral delivery of thymopentin

The purpose of this study was to design and evaluate lectin-conjugated PLGA nanoparticles for oral delivery of thymopentin. Thymopentin loaded PLGA nanoparticles (TP5-NPs) were prepared by a double emulsion-solvent evaporation technique. Novel WGA-PLGA conjugates were synthesized by coupling the amino groups of wheat germ agglutinin (WGA) to the carbodiimide-activated carboxylic groups of PLGA, and were incorporated into nanoparticles preparation to take mucoadhesive properties. Important characteristics such as particle size, zeta potential, entrapment efficiency, storage stability, as well as in vitro drug release behavior were investigated. The retention of biorecognitive activity of WGA after covalent coupling was confirmed by haemagglutination test. In vitro experiments with pig mucin (PM) demonstrated that the conjugation of WGA enhanced the interaction about 1.8-4.2 fold compared with that of the non-conjugated nanoparticles, and still exhibited sugar specificity. The pharmacodynamical studies on oral administration of WGA-TP5-NPs were performed in FACScan flow cytometry. The values of CD4(+)/CD8(+) ratios were significantly increased compared with that of TP5-NPs (p<0.01). The enhanced uptake was related to the increasing of WGA content on nanoparticles. These results confirmed that the conjugation of WGA onto PLGA nanoparticles effectively improved the intestinal absorption of TP5 due to specific bioadhesion on GI cell membrane.

Nanoparticles as potential oral delivery systems of proteins and vaccines: a mechanistic approach

Peptides and proteins remain poorly bioavailable upon oral administration. One of the most promising strategies to improve their oral delivery relies on their association with colloidal carriers, e.g. polymeric nanoparticles, stable in gastrointestinal tract, protective for encapsulated substances and able to modulate physicochemical characteristics, drug release and biological behavior. The mechanisms of transport of these nanoparticles across intestinal mucosa are reviewed. In particular, the influence of size and surface properties on their non-specific uptake or their targeted uptake by enterocytes and/or M cells is discussed. Enhancement of their uptake by appropriate cells, i.e. M cells by (i) modeling surface properties to optimize access to and transport by M cells (ii) identifying surface markers specific to human M cell allowing targeting to M cells and nanoparticles transcytosis is illustrated. Encouraging results upon in vivo testing are reported but low bioavailability and lack of control on absorbed dose slow down products development. Vaccines are certainly the most promising applications for orally delivered nanoparticles.

Lectin anchored stabilized biodegradable nanoparticles for oral immunization 1. Development and in vitro evaluation

The investigation comprises development of a stable and targeted formulation of HBsAg for the oral immunization against Hepatitis B. PLGA nanoparticles bearing HBsAg was prepared by double emulsion method. The antigen was protected from organic/aqueous interface by using protein stabilizer, trehalose. The acidic environment generated within PLGA nanoparticles was neutralized by co-encapsulation of a basic additive, Mg(OH)(2) which provides an additional stabilization to the antigen especially against acid induced antigen inactivation. Furthermore, lectin from Arachis hypogaea (PNA) was anchored on to the surface of the HBsAg loaded nanoparticles in order to enhance their affinity towards the antigen presenting cells of the Peyer's patches. The developed system was characterized for shape, size and loading efficiency. The antigen integrity was assessed by using SDS-PAGE followed by isoelectric focusing analysis. Bovine submaxillary mucin (BSM) was used as a biological model for in vitro ligand affinity determination and activity studies. The lectin anchored nanoparticles exhibited 52.18+/-4.73% loading while ligand density was estimated to be of 17.90+/-1.14 microg/mg. The results suggest that HBsAg can be successfully stabilized by co-encapsulation of an appropriate protein stabilizer, i.e. trehalose and a basic additive, Mg(OH)(2). The ligand-coupled nanoparticles demonstrated approximately four folds increase in degree interaction with the BSM as compared to plain nanoparticles. Additionally, the nanoparticles maintained their intrinsic sugar specificity as associated due to lectin (PNA).

Gastroretentive dosage forms: Overview and special case of Helicobacter pylori

The challenge to develop efficient gastroretentive dosage forms began about 20 years ago, following the discovery of Helicobacter pylori by Warren and Marshall. In order to understand the real difficulty of increasing the gastric residence time of a dosage form, we have first summarized the important physiologic parameters, which act upon the gastric residence time. Afterwards, we have reviewed the different drug delivery systems designed until now, i.e. high-density, intragastric floating, expandable, superporous hydrogel, mucoadhesive and magnetic systems. Finally, we have focused on gastroretentive dosage forms especially designed against H. pylori, including specific targeting systems against this bacterium.

One-step preparation of polyelectrolyte-coated PLGA microparticles and their functionalization with model ligands

This work aimed at the development of a novel surfactant-free, one-step process for the concomitant formation of poly(lactide-co-glycolide) (PLGA) microparticles (MP) and surface coating with the polyelectrolyte chitosan, which is suitable for subsequent covalent conjugation of bioactive ligands. The technology is based on solvent extraction from an O/W-dispersion using a static micromixer. Surface coating occurred through interaction of the negatively charged, nascent PLGA MP with the polycationic chitosan, which was dissolved in the aqueous extraction fluid. Particles of 1-10 mum in diameter were produced with excellent reproducibility. The chitosan-coated PLGA MP were spherical and showed a smooth surface without pores, as demonstrated by scanning electron microscopy (SEM). The chitosan coatings were characterized by zeta potential measurements and X-ray photoelectron spectroscopy (XPS). The functional amino groups of chitosan were used to conjugate two model ligands to the coating, i.e. fluorescamine and NHS-PEG-biotin. The presence of the conjugated ligands was revealed by confocal laser scanning microscopy (CLSM) and fluorescence activated cell sorting (FACS). Evidence for biotinylation was demonstrated through binding of fluorescently labelled streptavidin. The developed platform technology is straightforward and flexible. Future studies will focus on the design of microparticulate carriers with bioactive surfaces, e.g. as antigen delivery systems.

In vitro evaluation of biodegradable microspheres with surface-bound ligands

Protein ligands were conjugated to the surface of biodegradable microspheres. These microsphere-ligand conjugates were then used in two in vitro model systems to evaluate the effect of conjugated ligands on microsphere behavior. Microsphere retention in agarose columns was increased by ligands on the microsphere surface specific for receptors on the agarose matrix. In another experiment, conjugating the lectin Ulex europaeus agglutinin 1 to the microsphere surface increased microsphere adhesion to Caco-2 monolayers compared to control microspheres. This increase in microsphere adhesion was negated by co-administration of l-fucose, indicating that the increase in adhesion is due to specific interaction of the ligand with carbohydrate receptors on the cell surface. These results demonstrate that the ligands conjugated to the microspheres maintain their receptor binding activity and are present on the microsphere surface at a density sufficient to target the microspheres to both monolayers and three-dimensional matrices bearing complementary receptors.

Micromachined devices: the impact of controlled geometry from cell-targeting to bioavailability

Advances in microelectomechanical systems (MEMS) have allowed the microfabrication of polymeric substrates and the development of a novel class of controlled delivery devices. These vehicles have specifically tailored three-dimensional physical and chemical features which, together, provide the capacity to target cells, promote unidirectional controlled release, and enhance permeation across the intestinal epithelial barrier. Examining the biological response at the microdevice biointerface may provide insight into the benefits of customized surface chemistry and structure in terms of complex drug delivery vehicle design. Therefore, the aim of this work was to determine the interfacial effects of selective surface chemistry and architecture of tomato lectin (TL)-modified poly(methyl methacrylate) (PMMA) drug delivery microdevices on the Caco-2 cell line, a model of the gastrointestinal tract.

Lectin-functionalized poly (lactide-co-glycolide) nanoparticles as oral/aerosolized antitubercular drug carriers for treatment of tuberculosis

OBJECTIVES

This study was carried out to explore lectin-functionalized poly (lactide-co-glycolide) nanoparticles (PLG-NPs) as bioadhesive drug carriers against tuberculosis (TB), in order to reduce the drug dosage frequency of antitubercular drugs and thus improve patient compliance in TB chemotherapy.

METHODS

Wheat germ agglutinin (WGA)-coated PLG-NPs were prepared by a two-step carbodiimide procedure. This formulation was administered to guinea pigs through the oral/aerosol route for a detailed pharmacokinetic and chemotherapeutic evaluation. Immunological or hepatotoxic effects of WGA lectin, if any, were also determined.

RESULTS

WGA-functionalized PLG-NPs were in the size range of 350-400 nm, with binding of 3-3.5 microg of WGA/mg of PLG-NPs and drug encapsulation efficiency of 54%-66%. Upon administration of lectin-coated PLG-NPs through the oral/aerosol route, the presence of drugs in plasma was observed for 6-7 days for rifampicin and 13-14 days for isoniazid and pyrazinamide. However, upon administration of uncoated PLG-NPs (oral/aerosolized) rifampicin was detectable in plasma for 4-6 days, whereas isoniazid and pyrazinamide were detectable for 8-9 days. All three drugs were present in lungs, liver and spleen for 15 days. Administration of WGA-coated PLG-NPs caused a significant (P < 0.001) increase in the relative bioavailability of antitubercular drugs. Chemotherapeutic studies revealed that three doses of oral/nebulized lectin-coated nanoparticles fortnightly could yield undetectable mycobacterial colony forming units (cfu); this was achievable with 45 doses of oral free drugs.

CONCLUSION

WGA-functionalized PLG-NPs could be potential drug carriers for antitubercular drugs through the oral as well as aerosol route for effective TB control.

Lectin-mediated drug targeting: history and applications

The purpose of this paper is to review the history of using lectins to target and deliver drugs to their site of action. The hour of birth of "lectinology" may be defined as the description of the agglutinating properties of ricin, by Herrmann Stillmark in 1888, however, the modern era of lectinology began almost 100 years later in 1972 with the purification of different plant lectins by Sharon and Lis. The idea to use lectins for drug delivery came in 1988 from Woodley and Naisbett, who proposed the use of tomato lectin (TL) to target the luminal surface of the small intestine. Besides the targeting to specific cells, the lectin-sugar interaction can also been used to trigger vesicular transport into or across epithelial cells. The concept of bioadhesion via lectins may be applied not only for the GI tract but also for other biological barriers like the nasal mucosa, the lung, the buccal cavity, the eye and the blood-brain barrier.

Biomimetic design in microparticulate vaccines

Current efforts to improve the effectiveness of microparticle vaccines include incorporating biomimetic features into the particles. Many pathogens use surface molecules to target specific cell types in the gut for host invasion. This observation has inspired efforts to chemically conjugate cell-type targeting ligands to the surfaces of microparticles in order to increase the efficiency of uptake, and therefore the effectiveness, of orally administered microparticles. Bio-mimicry is not limited to the exterior surface of the microparticles. Anti-idiotypic antibodies, cytokines or other biological modifiers can be encapsulated for delivery to sites of interest as vaccines or other therapeutics. Direct mucosal delivery of microparticle vaccines or immunomodulatory agents may profoundly enhance mucosal and systemic immune responses compared to other delivery routes.

Synthesis of cytoadhesive poly(methylmethacrylate) for applications in targeted drug delivery

The objective of this work was to incorporate cytoadhesive properties into poly(methylmethacrylate) (PMMA) for potential applications in highly localized tissue-specific drug delivery. First, the PMMA was chemically modified by aminolysis to yield amine-terminated surfaces. X-ray photoelectron microscopy confirmed the presence of surface nitrogen entities, and the distribution of amine groups was found to be relatively uniform, as characterized by atomic force microscopy. The availability of these groups for attachment of biologically active molecules was characterized by fluorescence microscopy after immobilization of avidin-FITC. To render the PMMA cytoadhesive, avidin molecules were conjugated to the amine-terminated surfaces with a hydroxy-succinimide-catalyzed carbodiimide reagent and biotin-labeled lectins (tomato, which binds selectively to Caco-2 cells, and peanut, an unrelated lectin) subsequently were attached utilizing avidin-biotin chemistry. Cytoadhesive activity was evaluated by characterizing the interactions between microfabricated PMMA particles and Caco-2 monolayers. After 15-, 30-, 60-, and 120-min incubation periods, the tomato lectin-conjugated PMMA showed a two to sixfold increase in Caco-2 cell recognition over control particles. Furthermore, the stability of the cytoadhesive PMMA interactions appeared to be three to seven times greater than that of the control surfaces. These findings demonstrate that cytoadhesive properties of modified PMMA, making this novel bioactive polymer very promising for applications in targeted drug delivery.

Gantrez AN as a new polymer for the preparation of ligand-nanoparticle conjugates

The aim of this study was to evaluate the feasibility and in vitro activity of ligand-conjugates based on the use of poly(methyl vinyl ether-co-maleic anhydride) (PVM/MA or Gantrez AN). Fluorescently labelled PVM/MA nanoparticles were prepared by desolvation and cross-linkage with 1,3-diaminopropane (DP). Conjugates were obtained by incubation between the carriers and Sambucus nigra agglutinin (SNA) for 1 h in an aqueous medium. The lectin binding to the surface of nanoparticles was increased by both increasing the bulk ligand concentration and decreasing the amount of cross-linker. However, a concentration of about 0.3-0.4 mg DP per mg polymer was necessary to obtain maximum agglutination activity. Under optimal conditions, the amount of fixed ligand was 46 microg/mg nanoparticle (binding efficiency of 86%); although the activity of SNA conjugates was 13.3 microg/mg particle. The activity of nanoparticles, measured by the association to Caco-2 monolayers, was higher when SNA was covalently bound onto their surface. The lectin-conjugate interaction was 6-fold higher than conventional nanoparticles. Moreover, energy-dependent mechanisms were only observed in SNA-PVM/MA particles. Finally, the decrease in association in the presence of lactose demonstrates that both SNA- and SNA-conjugate-binding was due to a true lectin-sugar interaction.

Quantification of the bioadhesive properties of protein-coated PVM/MA nanoparticles

This work describes the bioadhesive properties of poly(methyl vinyl ether-co-maleic anhydride) (PVM/MA) nanoparticles fluorescently-labelled with rhodamine B isothiocyanate, and coated with either Sambucus nigra lectin (SNA-NP) or bovine serum albumin (BSA-NP). The different formulations (10 mg) were administered to animals by the oral route and the fraction of adhered particles to the mucosa was estimated by measuring the fluorescent marker after the digestion of the tissue. Plotting the amount of adhered particles in the whole gut versus time enabled us to determine the affinity of the formulation for the biological support (expressed as Q(max)), the intensity and relative duration of the bioadhesive phenomenon (AUC(adh) and MRT(adh), respectively), and the elimination rate of the adhered particles (k(adh)). SNA-NP displayed a similar adhesive affinity and adhesive intensity for the gut mucosa than the control particles; although, its maximum of interaction with the mucosa was observed 1 h post-administration, whereas control and BSA-NP took place only 30 min post-administration. On the other hand, the coating of nanoparticles with SNA significantly reduced the k(adh) (P<0.01) and, thus, MRT(adh) was 35 min longer for the lectin-conjugate than for the control. BSA-NP displayed a highest initial affinity for the gut mucosa and AUC(adh) was calculated to be 1.5 fold higher than for the control or SNA-NP. However, BSA-NP were eliminated more rapidly from the mucosa than SNA-NP and, thus, the MRT(adh) was only 27 min longer than control. In summary, the parameters describing the bioadhesive profile of a given formulation may be useful to quantify the potential of colloidal particulates to interact with a mucosa and to evaluate the influence of different ligands on the bioadhesive properties of the resulting drug carriers.