LC determination of morphine and morphine glucuronides in human plasma by coulometric and UV detection

Optimization and analytical behavior of a morphine electrochemical sensor in environmental and biological samples based on graphite rod electrode using graphene/Co3O4 nanocomposite

In this research, a new sensor based on graphene/Co₃O₄ (Gr/Co₃O₄) nanocomposite was employed for electrochemically determination of morphine (MOR). The modifier was synthesized with a simple hydrothermal technique and well characterized using X-ray difraction (XRD), scanning electron microscope (SEM) and energy dispersive X-ray spectroscopy (EDS) tools. The modified graphite rod electrode (GRE) was revealed a high electrochemical catalytic activity for the MOR oxidation and employed for the electroanalysis of trace MOR concentration by means of differential pulse voltammetry (DPV) technique. At the optimum experimental factors, the resulting sensor offered a good response for MOR in the concentration range of 0.5-100.0 μM with a detection limit of 80 nM. In addition, the modified electrode demonstrated an acceptable selectivity, stability and reproducibility. This assay was also provided a valid platform for the detection of MOR in environmental and biological samples with acceptable recoveries and RSD in the range of 97.2-102.8% and 1.7-3.4%, respectively. Taking to the simplicity, low cost and short analysis time, this approach is suggested for clinical, environmental and forensic testing of MOR.

Naked-Eye Detection of Morphine by Au@Ag Nanoparticles-Based Colorimetric Chemosensors

In this study, we report a novel and facile colorimetric assay based on silver citrate-coated Au@Ag nanoparticles (Au@AgNPs) as a chemosensor for the naked-eye detection of morphine (MOR). The developed optical sensing approach relied on the aggregation of Au@Ag NPs upon exposure to morphine, which led to an evident color variation from light-yellow to brown. Au@Ag NPs have been prepared by two different protocols, using high- and low-power ultrasonic irradiation. The sonochemical method was essential for the sensing properties of the resulting nanoparticles. This facile sensing method has several advantages including excellent stability, selectivity, prompt detection, and cost-effectiveness.

Technical Capabilities and Limitations of Optical Spectroscopy and Calorimetry Using Water-Miscible Solvents: The Case of Dimethyl Sulfoxide, Acetonitrile, and 1,4-Dioxane

In drug development, water-miscible solvents are commonly used to dissolve drug substances. Typical routine procedures in drug development include dilution of the stock drug solution into an aqueous solution containing target macromolecules for drug binding assays. However, water-miscible solvents impose some technical limitations on the assays on account of their light absorption and heat capacity. Here, we examined the effects of the dilution of 3 water-miscible solvents, that is, dimethyl sulfoxide, acetonitrile, and 1,4-dioxane, on the baseline stability and signal/noise ratio in circular dichroism spectroscopy, isothermal titration calorimetry, and differential scanning calorimetry. Dimethyl sulfoxide and 1,4-dioxane affect the signal/noise ratio of circular dichroism spectra at typically used concentrations due to their light absorbance. The water-miscible solvents generate interfering signals in the isothermal titration calorimetry due to their mixing heat. They show negative or positive slope in the differential scanning calorimetry. Such interfering effects of the solvents are reduced by appropriate dilution according to the analytical techniques. Because the water-miscible solvents have solubilization capacity for alkyl chain moieties and aromatic moieties of chemicals, drug substances containing these moieties can be dissolved into the solvents and then subjected to the analyses to examine their interactions with target proteins after appropriate dilution of the drug solutions.

Disposable electrochemical immunosensor array for the multiplexed detection of the drug metabolites morphine, tetrahydrocannabinol and benzoylecgonine

Heroin, marijuana and cocaine are widely abused drugs. Their use can be readily detected by analyzing urine for the metabolites morphine (MOR), tetrahydrocannabinol (THC) or benzoylecgonine (BZC). A multiplex immunosensor is described here for detection of MOR, THC and BZC using screen printed carbon array electrodes modified with gold nanoparticles. Antibodies against MOR, THC and BZC were immobilized on eight electrodes in a sensor array simultaneously, and a competitive assay was used for the detection. The free analytes in the sample compete with bovine serum albumin-conjugated analytes for the immobilized antibodies on the sensor surface. The array is capable of detecting the three drugs simultaneously within 20-40 min. The method has a high sensitivity, with detection limits as low as 1.2, 7.0, and 8.0 pg.mL^-1 for MOR, THC and BZC, respectively. Cross reactivity testing was preformed to monitor any nonspecific binding. The results revealed good selectivity. Urine samples were spiked with the 3 drugs and tested with the multiplexed immunosensor. Recovery percentages ranged between 88 to 115%. Graphical abstract Schematic presentation of the multiplexed immunosensor for drugs of abuse,viz. tetrahydrocannabinol (THC), morphine (MOR), and benzoylecgonine (BZC)) by using an array of modified electrodes.

Determination of Morphine in Human Urine by the Novel Competitive Fluorescence Immunoassay

A competitive fluorescence immunoassay for the identification and quantification of morphine has been developed on the basis of hapten-coated plate format. Hapten was prepared through covalent conjugating a morphine derivative with albumin bovine. In the immunoassay, the hapten was inoculated on a 96-well plate and then bound with monoclonal antibodies labeled with a signal indicating dye, fluorescein isothiocyanate (FITC). Unbound FITC-antibodies were rinsed off from the plate. The fluorescein intensity decreases in the presence of morphine molecules due to the competitively binding to antibodies against hapten. The intensity is inversely correlated with the concentration of morphine. In quantitative analysis for urine samples, we obtained a linearity range of 0.2 μg/mL∼2.5 μg/mL, along with a detection limit of c.a. 1 ng/mL. The fluorescence immunoassay shows low cross-reactivity (below 10%) to 6-acetylmorphine, 3-acetylmorphine, and heroine. The developed method produced comparable results to the standard GC-MS/MS method. In conclusion, a rapid and efficient screening tool for morphine in clinical human urine has been established.

Quantification of morphine and its major metabolites M3G and M6G in antemortem and postmortem samples

Morphine is one of the most effective agents for the control of significant pain, primarily metabolized to morphine-3-glucuronide (M3G) and morphine-6-glucuronide (M6G). While M6G is a potent opioid agonist, M3G has no opioid action and seems to have a role in side-effects caused by morphine. In this study, a reversed-phase high-performance liquid chromatographic method with diode-array and electrochemical detection was developed for the simultaneous determination of morphine, M3G and M6G in antemortem and postmortem samples (plasma, whole blood, urine, liver, kidney and brain). Morphine, glucuronides and internal standard were extracted by double solid-phase extraction and the separation was carried out with a Waters Spherisorb® ODS2 reversed-phase column and potassium phosphate buffer (pH = 2.2)–acetonitrile containing sodium dodecyl sulfate as the mobile phase. The method proved to be specific with good linearity for all analytes in a calibration range from 1 to 600 ng/mL and proved to be accurate and have adequate precision and recovery. Limits of detection in the studied matrices were 0.4–4.5 ng/mL for morphine, 2.7–6.1 ng/mL for M3G and 0.8–4.4 ng/mL for M6G. The proposed method can be successfully applied to quantify morphine and its metabolites in several biological samples, covering the major routes of distribution, metabolism and elimination of morphine.

Morphine and its metabolites: Analytical methodologies for its determination

The present article reviews the methods of determination published for morphine and its metabolites covering the period from 1980 until at the first part of 2006. The overview includes the most relevant analytical determinations classified in the following two types: (1) non-chromatographic methods and (2) chromatographic methods.

Development and validation of a radioreceptor assay for the determination of morphine and its active metabolites in serum

This article describes the development and validation of a radioreceptor assay for the determination of morphine and morphine-6-beta-glucuronide (M6G) in serum. The assay is based on competitive inhibition of the mu-opioid-selective radiolabeled ligand [3H]-DAMGO by opioid ligands (e.g. M6G) for binding to the striatal opioid receptor. The assay has been validated according to the Washington Conference Report on Analytical Method Validation. The radioreceptor assay can be performed in serum without prior pre-treatment of the sample. Direct addition of the sample results in no significant loss in maximal binding sites, and therefore, no loss in sensitivity. The assay proves to be selective for a multitude of opioid agonists and antagonists (e.g. morphine IC50 = 4.1 nM and M6G IC50 = 12.8 nM). Moreover, morphine-3-glucuronide (M3G) displays a low affinity (IC50 = 1100 nM) for the mu-opioid receptor and according to the literature demonstrates no analgesic activity. This makes discrimination, in relation to the analgesic effect, of the two metabolites of morphine possible. The assay is fast (assay time <4h, analysis 5 min/sample), easy and the sensitivity (limit of detection (LOD) = 1.6 nM M6G-equivalents) is such that very potent agonists, like morphine and M6G, can be measured at the desired serum levels. The assay is accurate (<18%), but precision is limited if measured over several days (>35%). The assay is most accurate and precise if measured over a range from 3.5 to 40 nM M6G-equivalents. Based on the limited inter-assay precision, we propose to use this receptor assay mainly as a screening tool for neonates treated with morphine.

Determination of heroin metabolites in human urine using capillary zone electrophoresis with β-cyclodextrin and UV detection

A method has been developed for the detection of a mixture of morphine, codeine, 6-acetyl morphine (6-AM) and normorphine using capillary zone electrophoresis (CZE). The method utilized urinary 6-AM as a diagnostic indicator of heroin abuse because it is not a product of either morphine or codeine metabolism. The electrophoretic separation was achieved using an uncoated (50 microm I.D.) fused-silica capillary, 77 cm long, containing the detector window 10.0 cm from the outlet end. The running buffer (pH 6.0) contained 50 mM sodium phosphate and 0.015 M beta-cyclodextrins (beta-CD). The samples were first extracted using a mixed-mode solid-phase extraction procedure and then analyzed by CZE. The UV absorbance detection was monitored at 214 nm. It has been found that beta-CDs can improve separation efficiency due to their hydrophobic cavity. The effect of the concentration of beta-CD and pH was also evaluated. The application of electrokinetic injection with field amplified sample stacking results in low detection limits (40 ng/ml for each analyte) and the method has good reproducibility, precision, accuracy, and high recovery.

Beta-phenylethylamines and the isoquinoline alkaloids

This review covers beta-phenylethylamines and isoquinoline alkaloids and compounds derived from them, including further products of oxidation, condensation with formaldehyde and rearrangement, some of which do not contain an isoquinoline system, together with naphthylisoquinoline alkaloids, which have a different biogenetic origin. The occurrence of the alkaloids, with the structures of new bases, together with their reactions, syntheses and biological activities are reported. The literature from July 2001 to June 2002 is reviewed, with 581 references cited.

Cone voltage induced in-source dissociation of glucuronides in electrospray and implications in biological analyses

Glucuronidation is a common mechanism in drug metabolism. In-source dissociation of glucuronides in electrospray generates fragment ions identical to those of the precursor ions of the original drugs. The effect of experimental parameters on the process was investigated in the present study using both commercially available compounds and glucuronides generated from microsomal glucuronidation incubations. It was found that cone voltage was the most critical parameter contributing to in-source fragmentation of both O- and N-glucuronides, whereas both the desolvation temperature and the source temperature had little effect. Additionally, the extent of in-source dissociation varied for different glucuronides and could be minimized by lowering cone voltage. As demonstrated in real examples, minimizing in-source dissociation can lead to higher sensitivity in detecting glucuronides in biological samples. In addition, product ions resulting from in-source dissociation of glucuronides potentially interfere with accurate determinations of corresponding drug levels if chromatographic separation is not adequate. For cases in which chromatographic separation of glucuronides from the original drugs is not readily achieved or high-throughput analyses are desired, interference caused by in-source dissociation can usually be eliminated simply by using lower cone voltage. This approach has been proven to be effective in the analysis of more than 100 glucuronides generated from in vitro microsomal incubations.