Assay and purity control of tetracycline, chlortetracycline and oxytetracycline in animal feeds and premixes by TLC densitometry with fluorescence detection

Fluorescent Sensors for Tetracycline Detection in Aqueous Medium: A Mini-Review

Tetracycline (TC) is a commonly used antibiotic in human therapy and animal husbandry. Public concerns about TC residues inflated due to their negative impact on the environment, food, and human health concerns. To ensure human health and safety, there is a need for fluorogenic chemosensors that can easily detect TC antibiotics with high selectivity and sensitivity in the aqueous medium. This mini-review discusses the progress and achievements in several fluorometric antibiotic tetracycline detection methods. Fluorogenic chemosensors for tetracycline antibiotics with easy-to-use, high selectivity, and sensitivity have been essentially required to regulate food safety and secure human health and safety. Moreover, we gave more attention to the practical applicability of chemosensors for tetracycline antibiotics in food and water quality assessment. This article starts with a section that constitutes an overview of the problems of antibiotics and the typical features of traditional techniques of antibiotic detection. It then goes on to describe up-to-date optical methods for the selective detection and efficient removal of TC. These methods involve a variety of platforms, like tetraphenylethylene polymers, metal complexes, self-assembled CuNCs, and hydrogel. The article also discusses the practical applicability of chemosensors for tetracycline antibiotics in food and water quality.

Stability indicating high performance thin layer chromatography method development and validation for quantitative determination of tetracycline hydrochloride in tetracycline hydrochloride active pharmaceutical ingredient (API) and its dosage forms

Simple, quick, cost-effective, and environmentally friendly analytical methods for quality assurance and control roles for different medicines, including Tetrcyclines, are most significantly needed. Also, different thin layer chromatography (TLC)-based methods for tetracycline identification exist, but high performance thin layer chromatography methods based on modern state- of- the art equipment are still nonexistent. Thus, in this study, analytical method development and verification were done by high performance thin layer chromatography (HPTLC) (using an automated equipment model) using glass plates coated with silica gel 60 F254 after treating with 10% Na2EDTA. Validation was carried out according to International Council for Harmonization (ICH) guidelines. A mobile phase formed from ethyl acetate, acetonitrile, methanol, and 1% aqueous ammonia in the composition of 4.4:19.6:10:6 volume to volume ratio (V/V) was used. Rf value, percentage recoveries, linearity ranges, limit of detection (LOD), and limit of quantitation (LOQ) for the developed HPTLC method were 0.28, 100.83-106.25%, 160-560 ng/band (r2 values of 0.9999), 31.9 ng/band, and 96.7 ng/band, respectively. The results of the sample assays conducted using the new method and the United States Pharmacopoeia (USP) high performance liquid chromatography (HPLC) method were 91.59% to 108.3% and 90.83% to 102.85%, respectively. The F test for the aforementioned methods was 2.01, which is smaller than the tabulated F value of 5.05 with 5 degrees of freedom at a 95% confidence range, proving that the newly developed HPTLC and HPLC pharmacopoeial methods can be used interchangeably.The newly developed HPTLC method is easy, economical, specific, accurate, and roboust, thus it can be employed in a range of settings that require quality control and assurance activities of tetracycline hydrochloride (TC-HCl) in bulk and ointment dosage forms.

Chromatographic analysis of bromhexine and oxytetracycline residues in milk as a drug analysis medium with greenness profile appraisal

Tetracyclines are frequently employed in animal husbandry. Bromhexine is a mucolytic drug that improves the efficacy of tetracyclines. It has been reported that residues of tetracyclines in milk may have negative effects on humans. Two versatile and accurate methods were developed for concurrent analysis of oxytetracycline (OTC) and bromhexine (BR) residues in spiked milk samples. Sample preparation was carefully considered for extraction and cleanup using the ecofriendly chemicals acetic acid, 0.1 N EDTA and ethanol or methanol. The first method was a TLC-densitometric method in which TLC plates previously treated with 10% EDTA (pH 9 with 40% sodium hydroxide) were used as a stationary phase. A solvent mixture of methanol : methylene chloride : 2% aqueous acetic acid (8 : 2 : 0.5, by volume) was the developing system, and detection was carried out at 254 nm. Metformin was used as the internal standard, and linearity was achieved in the ranges of 0.2-10 and 0.04-2 μg per band for OTC and BR, respectively. The second method was a RP-HPLC method; separation was performed on a C18 column using an isocratic mixture of ethanol : 7.5% aqueous acetic acid (70 : 30, v/v). Separation was achieved within 10 minutes, and linearity was proven in the ranges of 0.05-50 and 0.05-30 μg mL^-1 for OTC and BR, respectively. Diclofenac sodium was used as an internal standard. The proposed methods were validated in accordance with the FDA Center for Veterinary Medicine guidelines. Moreover, the performance and health and environmental impacts of the methods were evaluated using several greenness metrics, namely, the National Environmental Methods Index (NEMI), modified NEMI, Green Analytical Procedure Index (GAPI), Analytical Eco-Scale and Analytical GREEnness (AGREE) metric approaches. All the obtained results proved the validity of the developed methods concerning its performance and ecological effects. The methods can be used to investigate the presence of OTC residues in various marketed milk samples to maintain public health.

Highly Sensitive Detection of Trace Tetracycline in Water Using a Metal-Organic Framework-Enabled Sensor

Due to the abuse application of antibiotics in the recent decades, a high level of antibiotics has been let out and remains in our environment. Electrochemical sensing is a useful method to sensitively detect antibiotics, and the key factor for a successful electrochemical sensor is the active electrode materials. In this study, a sensitive electrochemical sensing platform based on a metal-organic framework (MOF) of MIL-53 (Fe) was facilely fabricated. It shows highly selective and sensitive detection performance for trace tetracycline. Differential pulse voltammetry (DPV) was applied to analyze the detection of tetracycline. The linear range of tetracycline detection was 0.0643 μmol/L-1.53 μmol/L, and the limit of detection (LOD) is 0.0260 μmol/L. Furthermore, the MOF-enabled sensor can be effectively used in actual water bodies. The results indicate that the electrochemical sensor is a high potential sensing platform for tetracycline.

Oxytetracycline and Florfenicol Concentrations in Food-Additive Premixes Authorised for Broiler Chickens: Assessing Degree of Agreement with Manufacturers Labelling

Simple Summary

In this study, two analytical methodologies were developed for the analysis of florfenicol and oxytetracycline premixes, which were applied in the analysis of pharmaceutical formulations manufactured at the national level. These premixes were assessed, since florfenicol and oxytetracycline are widely used in poultry farming, as they are active against several types of bacteria and their cost/effectiveness ratio is quite attractive and are administered for the therapeutic treatment of bacterial infections. However, these premixes must actually contain the active ingredients at a concentration that matches what the manufacturer states on their labels. Otherwise, they will not reach plasma concentrations that are therapeutically effective. In this work we set forth to verify via LC-MS/MS whether three commercial formulations of oxytetracycline premixes, and two of florfenicol, effectively matched their labels or not. Interestingly, this methodology detected oxytetracycline at a higher concentration than expected for those formulations, whereas the concentrations of florfenicol were lower than the on-label statement for both formulations.

Abstract

Antimicrobials premixes are the presentation of choice to administer drugs simultaneously to groups of animals in intensive husbandry systems that require treatment for pathologies of bacterial origin. Among the premixes available for use in poultry, florfenicol and oxytetracycline are commonly administered via food or water. However, their actual concentration in premixes must meet on-label statements to ensure plasma concentrations reach effective therapeutic levels. Hence, this work was designed for the purpose of verifying whether the concentration of antimicrobial present in five premixes matched their on-label statement. Three oxytetracycline premixes, and two of florfenicol, were analysed using a Xevo TQ-S micro UPLC-MS/MS, and an ABSciex API4000 HPLC-MS/MS, respectively. Analytical methodologies were implemented and validated, showing an R² ≥ 0.99 for the calibration curves. Oxytetracycline was detected in these premixes at concentrations exceeding on-label statements by 13.28%, 21.54%, and 29.68%, whereas florfenicol concentrations detected in premixes were 13.06% and 14.75% lower than expected. Consequently, this work shows that the concentration of active ingredients that are present in commercial formulations effectively differ from those stated on premix labels, and it also highlights how unpredictable their range of variability might be. This must be addressed through solid and updated laws that guarantee an effective pharmaceutical product.

Effect of the tetracycline antibiotics on performance and microbial community of microbial fuel cell

The adverse effect of tetracycline antibiotics on microbial activity is one of the serious risks for the biologic wastewater treatment process. The microbial fuel cells (MFCs) are a promising technology for wastewater treatment and renewable power generation process. For this reason, the investigation of the inhibition effect of the tetracyclines on the MFCs is essential for reducing damage on the environment. This paper focused on the performance of MFCs under different antibiotic concentrations at the range of 0.25-50 mg/L. The power generation performance, microbial community and biofilm characteristics (morphology, resistance and viability) of MFCs were investigated in detail. The results indicated that the increase in the antibiotic concentration significantly affected the MFC performance and microbial community. A modified non-competitive inhibition model was used to predict the inhibition effect of tetracycline antibiotics on the MFCs.

Luminescent lanthanide metal-organic framework test strip for immediate detection of tetracycline antibiotics in water

Tetracycline antibiotics (TCs) are a kind of commonly used antibiotics for treating infections, however, the overuse of TCs has adversely affected human health and the ecosystem. Thus, detection of TCs in water is important but challenging. In this work, a luminescent lanthanide metal-organic framework (LnMOF) sensor (1) for immediate detection of oxytetracycline (OTC) and tetracycline (TC) is developed. The sensor has high acid-base and water stability. Investigation reveals that among the 27 species of antibiotics, anions and cations under investigation, 1 shows highly selective sensing towards OTC and TC, and the detection is not disturbed by the presence of other species. The limit of detection (LOD) for OTC and TC are ultra-sensitive value of 1.95 and 2.77 nM, respectively. Investigation reveals the sensing mechanism is due to the inner filter effect. Further studies reveal that the sensor can be used in real sample monitoring. More importantly, test strips based on 1 are manufactured. They are an easy-to-use, low-cost, highly selective and sensitive sensing device for detecting OTC and TC. The sensing can be distinguished immediately and easily by the naked eyes, making it an excellent candidate to monitor OTC and TC in real use.

An electrochemical strategy for tetracycline detection coupled triple helix aptamer probe with catalyzed hairpin assembly signal amplification

Incorporating elements of triple-helix aptamer probes (TAP), catalyzed hairpin assembly (CHA) signal amplification and host-guest recognition, a novel "signal-on" sensing strategy for sensitive electrochemical quantification of tetracycline (TC) was reported unprecedentedly. TAP was formed involving an aptamer loop, two-segment stems and a triplex oligonucleotide serving as trigger probe. Then, the trigger probe would be released from TAP once the target presented due to the conformational variation of TAP induced by aptamer binding event, sparking off the upcoming CHA amplification reaction, in which two coexisting DNA hairpins (H1 and H2 both modified with the electroactive molecules) would hybridize into plentiful H1-H2 double helices. Afterwards, the Exonuclease III was added, demolishing double helices and simultaneously releasing plentiful electroactive molecules which were capable of diffusing onto the electrode surface under the assistance of β-cyclodextrin due to host-guest recognition, where appreciable signals were enriched and generated. As thus, considerably slight amounts of targets though, emitted trigger probes, yet efficiently engining spectacular CHA cycles of reactions through which amplified signals were yielded, and in turn progressively enabling the sensitive target detection done. Under optimal conditions, the growing signal stayed a linear relation along with the logarithm of the target concentrations ranging from 0.2 nM to 100 nM, the detection limit reaching as low as 0.13 nM. This approach was desirable regarding to sensitivity, detection limit and range, prospectively rendering a service for diverse targets detection by easily replacing the matched aptamer loop of TAP.

Validation of an Analytical Methodology for Determination of Oxytetracycline Residue in Milk by HPLC with UV Detection

ABSTRACT Oxytetracycline (OTC) is used for the prophylaxis and treatment of a great number of diseases since this antibiotic possesses broad-spectrum activity against many pathogenic organisms. The use of OTC has become a serious problem because of the possible existence of its residues in milk, which can be directly toxic or cause allergic reactions in some hypersensitive individuals. Even low-level doses of antibiotic in milk consumed for long periods can lead to problems regarding the spread of drug-resistant microorganisms. The purpose of the present study was to investigate residual OTC in consuming milk in Tehran using high-performance liquid chromatography (HPLC) with UV detector. OTC residues in extracts obtained from a preliminary cleanup procedure and recoveries from spiked OTC in desire concentrations were between 80% and 97% with appropriate coefficients of variation. The limit of detection (LOD) and limit of determination (LOQ) were 50 and 68.5 ng/mL, respectively. This result shows that this method would be useful for routine monitoring of oxytetracycline residues in bovine dairy milk.

Development and validation of a rapid method for the determination of tetracycline in activated sludge by SPE clean-up and HPLC-UV detection

The aim of this study was to develop and validate a rapid analytical method for tetracycline (TC) determination in activated sludge. The analytical method developed is applicable on activated sludge containing a volatile suspended solid concentration below 10 g l(-1), which nearly includes all wastewater treatment plants and the major proportion of membrane bioreactors. The analytical method included two steps: sample clean-up followed by high-performance liquid chromatography (HPLC) with ultraviolet (UV) detection analysis. Prior to the analysis, TC was extracted from the matrix by a mixture of EDTA and McIlvaine buffer. Sample clean-up was carried out by solid phase extraction (SPE) with strong anion exchange (SAX) cartridges. SAX cartridges retained organic matters interfering with TC. Analysis was performed by HPLC-UV with a gradient elution. The method was validated as the R2 value was 0.9991 for the calibration curve. Recoveries were between 92% (+/- 6%) and 103% (+/- 9%). The limit of detection (LOD) and the limit of quantification (LOQ) were 0.1 mg l(-1) and 0.5 mg l(-1), respectively. Accuracy was not entirely satisfactory, but should be related to the complexity of the matrix, which is a hindrance to the precision of the method. The method was also validated on industrial samples.

Chromatographic analysis of banned antibacterial growth promoters in animal feed

The issue of antimicrobial use in animals used as food is of global concern. Antimicrobials are used in animal agriculture to improve health and welfare of animals, meat quality, the economic efficiency of growth and production and public health by decreasing shedding of zoonotic pathogens. However, large quantities are often used without professional supervision. The growth-promotant (now reclassified as zootechnical feed additives) effect of low levels of antibiotics in animal feeds was first described in the late 1940s. Already in 1969 the Swann Committee recommended that use of antibiotics as a supplement in animal feedstuff should be restricted to those with little or no application as therapeutic agents for humans and animals, which would not impair the efficacy of therapeutic antibiotics through the development of resistant strains of organisms. Antimicrobials like avoparcin, ardacin, zinc bacitracin, virginiamycin, tylosin, spriramycin, carbadox and olaquindox were withdrawn within the period 1997-1999. Four others (monensin sodium, salinomycin sodium, avilamycin and flavophospholipol) were still permitted for use as growth promoters in animal feed to animals marketed in the European Union (EU). Since January 2006, they have been banned as well. This review focuses on the analytical methods developed to be an effective tool for monitoring compliance with the ban.

Development and validation of an HPLC confirmatory method for the determination of tetracycline antibiotics residues in bovine muscle according to the European Union regulation 2002/657/EC

A high-performance liquid chromatographic method with diode-array detection, at 351 nm, was developed and validated for the determination of five tetracyclines (TCs): minocycline, tetracycline, oxytetracycline, chlortetracycline, and doxycycline in bovine muscle. Samples were macerated with a buffer solution, centrifuged, and purified using Abselut Nexus SPE cartridges. The separation of the examined TCs was achieved on an Inertsil ODS-3 5 microm, 250 x 4 mm analytical column, at ambient temperature. A multistep gradient elution was followed using 0.05 M oxalic acid and CH3CN, at a flow rate of 1.65 mL/min. The procedure was validated according to the European Union regulation 2002/657/EC determining selectivity, stability, decision limit, detection capability, accuracy, and precision. The results of the validation process demonstrate that the method can be readily applied to European Union statutory veterinary drug residue surveillance programmes. Mean recoveries of TCs from bovine muscle samples spiked at three concentrations (100, 250, and 400 ng/g) were in the range of 98.7-103.3%. Method's LOQ values achieved were 40 microg/kg for MNC, CTC, and DC and 25 microg/kg for OTC and TC. The decision limits (CCalpha) were in the range of 104.7-109.8 microg/kg, while the detection capability (CCbeta) was in the range of 108.4-116.7 microg/kg for all compounds.

Optimizing the integrated pulsed amperometric multicycle step waveform for the determination of tetracyclines

A method of modified integrated pulsed amperometric detection with multicycle step waveform (Multi-IPAD) following high-performance liquid chromatography (HPLC) was applied for the determination of tetracyclines (TCs) including dimethyltetracycline (DMTC), oxytetracycline (OTC) and tetracycline (TC). The key advantages of the Multi-IPAD are the abilities to enhance sensitivity and reproducibility and the ability to keep working electrode clean through the use of a high-frequent waveform alteration in integration step and the use of a cleaning potential, which is quite different from conventional three-step potential waveform. The analyses were carried out using the mobile phase of acetonitrile-water mixture solution (10:90, v/v) containing 1% perchloric acid on a C(18) column at a flow rate of 0.21 mL/min. The IPAD waveform parameters were optimized to maximize the signal-to-noise ratio (S/N) and successfully applied for the sensitive detection of TCs. The detection limits (S/N=3, 20 microL injected) were 0.07 mg/L for DMTC, 0.08 mg/L for OTC and 0.05 mg/L for TC. The peak height relative standard deviations (RSDs) of every compound for replicate injection (n=15) determined were below 4.6%.

Optimization of the separation conditions of tetracyclines on a preselected reversed-phase column with embedded urea group

The use of a C12 stationary phase with embedded polar group has been investigated for the separation of seven tetracyclines. The influence of pH, organic modifier, buffer, and temperature on the peak shape and analyte separation was discussed. It appears that all the chromatographic conditions had a great effect on both the resolution and peak shape whereas the elution order was not affected. The baseline separation with symmetrical peaks of the seven tetracyclines can be obtained with a mobile phase containing either 5 mM phosphate buffer pH 2.5/ACN (84:16 v/v) or 5 mM perchlorate buffer pH 2.5/ACN (75:25 v/v) at a temperature not exceeding 20 degrees C. This study reveals that the retention mechanism is ion-pairing.

Analysis of Tetracycline Antibiotics Using HPLC with Pulsed Amperometric Detection

The analysis of tetracycline, oxytetracyline, chlortetracycline and doxycycline by high-performance liquid chromatography with pulsed amperometric detection using an anodized boron-doped diamond thin film (BDD) electrode is originally reported. The analyses were carried out using the mobile phase, phosphate buffer (0.01 M, pH 2.5)-acetonitrile (80:20; v/v), on a C18 column (250 x 4.6 mm i.d., 5 microm) at a flow rate of 1.0 mL/min. The optimal PAD waveform parameters at the anodized BDD were 1.5 V (versus Ag/AgCl) detection potential (E(det)) for 290 ms (200 ms delay time and 90 ms integration time), 2.0 V (versus Ag/AgCl) oxidation potential (E(oxd)) for 200 ms oxidation time (t(oxd)) and 0.4 V (versus Ag/AgCI) reduction potential (E(red)) for 200 ms reduction time (t(red)). The proposed method showed the simultaneous determination of tetracycline, oxytetracyline, chlortetracycline and doxycycline with a linear range of 0.1 - 100 microg/mL, detection limits of 0.05 - 0.1 microg/mL and recoveries of 70.8 - 96.0%. The application of this method to real samples was demonstrated and validated using a shrimp sample.