The Charnley versus the Spectron hip prosthesis: radiographic evaluation of a randomized, prospective study of 2 different hip implants

Experience of an Anatomic Femoral Stem in a United Kingdom Center - Excellent Survivorship and Negligible Periprosthetic Fracture Rates at Mean 12 Years Following Primary Total Hip Arthroplasty

BACKGROUND

As the clinical burden of periprosthetic fractures (PPFs) continues to increase, it has been suggested that the use of anatomical femoral stems may help reduce PPF risk. The primary aim of this study was to determine the survivorship and PPF rate of an anatomical femoral stem in a single center at minimum 10-year follow-up.

METHODS

A total of 1,000 consecutive total hip arthroplasties (THAs) performed using an anatomical femoral stem were identified from a prospectively collected arthroplasty database. Patient radiographs were reviewed finally at a mean of 12 years (range, 10 to 16 years) following surgery to identify any revision surgery, dislocations or PPFs. Mean patient age at surgery was 69 years (range, 24 to 93). There were 634 women (63%). Osteoarthritis was the operative indication in 946 patients (95%).

RESULTS

All-cause THA survivorship was 99.1% (95% confidence interval (CI), 99.0-99.3%) at 10 years and 97.9% (CI, 97.8 - 98.0%) at 15 years. Stem survivorship at 10 years was 99.6% (CI, 99.5-99.7%) and at 15 years was 98.2% (CI, 98.1-98.3%). The 15-year stem survival for aseptic loosening was 100% with no cases of significant lysis found (lucent line >2mm). Implant survivorship was not significantly impacted by patient sex (P = .65), body mass index (P = .49), deprivation level (P = .284), operative indication (P = .33), or American Society of Anesthesiologists class (P = .374). There were 3 PPFs identified (0.3%) at mean 12-year follow-up and 15 dislocations (1.5%).

CONCLUSION

This anatomical femoral stem demonstrated excellent survivorship and negligible PPF rates at mean 12-year follow-up following primary THA.

Inflammatory tissue reactions around aseptically loose cemented hip prostheses: A retrieval study of the Spectron EF stem with Reflection All-Poly acetabular cup

The cemented Spectron EF stem in combination with the cemented non‐crosslinked Reflection All‐Poly cup showed a high rate of mid‐term aseptic loosening. However, the failure mechanisms are not fully known. We assessed the inflammatory tissue reactions and wear particles in periprosthetic tissues, implant wear and blood metal ion levels in 28 patients with failed implants. Histological analysis showed a macrophage pre‐dominant pattern with randomly distributed lymphocytes, with various amounts of neutrophils and giant cells. The number of different cell types in the tissue samples from patients in the cup group and in the stem group was similar. Wear particles, mainly ZrO₂, CoCrMo, and polyethylene particles of different sizes and shapes, were associated with macrophages/giant cells, and total particle load/mm² was higher in cases of stem loosening. The Spectron EF stems were heavily worn, abraded, and polished. Stem abrasion correlated with metal ion concentrations in blood. The median polyethylene wear rate of the Reflection cups was 0.23 mm/year. The high proximal roughness of the Spectron EF stem resulted in excessive cement wear during loosening. The resulting inflammatory tissue responses to the degradation products both from the cup and the stem led to massive osteolysis and subsequent implant loosening.

The Olympia anatomic polished cemented stem is associated with a high survivorship, excellent hip-specific functional outcome, and high satisfaction levels: follow-up of 239 consecutive patients beyond 15 years

INTRODUCTION

The Olympia femoral stem is a stainless steel, anatomically shaped, polished and three-dimensionally tapered implant designed for use in cemented total hip arthroplasty (THA). The primary aim of this study was to determine the long-term survivorship, radiographic outcome, and patient-reported outcome measures (PROMs) of the Olympia stem.

PATIENTS AND METHODS

Between May 2003 and December 2005, 239 patients (264 THAs) underwent a THA with an Olympia stem in our institution. Patient-reported outcome measures were assessed using the Oxford Hip Score (OHS), EuroQol-5 dimensions (EQ-5D) score, and patient satisfaction at mean 10 years following THA. Patient records and radiographs were then reviewed at a mean of 16.5 years (SD 0.7, 15.3-17.8) following THA to identify occurrence of complications or revision surgery for any cause following surgery. Radiographs were assessed for lucent lines and lysis according to Gruen's zones RESULTS: Mean patient age at surgery was 68.0 years (SD 10.9, 31-93 years). There were 156 women (65%, 176 THAs). Osteoarthritis was the indication for THA in 204 patients (85%). All cause stem survivorship at 10 years was 99.2% (95% confidence interval [CI], 97.9%-100%) and at 15 years was 97.5% (94.6%-100%). The 15-year stem survival for aseptic loosening was 100%. Analysis of all-cause THA failure demonstrated a survivorship of 98.5% (96.3%-100%) at 10 years and 95.9% (92.4%-99.4%) at 15 years. There were 9 THAs with non-progressive lucent lines in a single Gruen zone and 3 had lines in two zones, and no patient demonstrated signs for lysis. At a mean of 10-year (SD 0.8, 8.7-11.3) follow-up, mean OHS was 39 (SD 10.3, range 7-48) and 94% of patients reported being very satisfied or satisfied with their THA.

CONCLUSIONS

The Olympia stem demonstrated excellent 10-year PROMs and very high rates of stem survivorship at final follow-up beyond 15 years.

Factors affecting the incidence of postoperative periprosthetic fractures following primary and revision hip arthroplasty: a systematic review and meta-analysis

Objectives

The increasing number of hip arthroplasties (HA), due to the growing elderly population, is associated with the risk of femoral periprosthetic fractures (FPFs). The purpose of this study was to identify potential risk factors for the development of FPFs after HA.

Methods

A systematic review was conducted in five data bases (Medline, Embase, Cochrane, Cinahl, ICTRP) according to the Preferred Reporting Items for Systematic reviews and Meta-analysis (PRISMA) guidelines up to May 2019, using the key words “risk factor,” “periprosthetic fracture,” and “hip replacement or arthroplasty.” Meta-analysis of the clinical outcomes of HA and subgroup analysis based on the factors that were implicated in FPFs was performed.

Results

Sixteen studies were included (sample size: 599,551 HA patients, 4253 FPFs, incidence 0.71%). Risk factors statistically associated with increased incidence of FPFs were female gender (+ 40%), previous revision arthroplasty surgery (× 3 times), and the presence of rheumatoid arthritis (× 2.1 times), while osteoarthritis (− 57%), cement application (− 59%), and insertion of Biomet (− 68%) or Thompson’s prosthesis (− 75%) were correlated with low prevalence of FPFs. Obesity, cardiac diseases, advanced age, bad general health (ASA grade ≥ 3), and use of Exeter or Lubinus prosthesis were not linked to the appearance of FPFs.

Conclusion

This meta-analysis suggested that female gender, rheumatoid arthritis, and revision arthroplasty are major risk factors for the development of FPFs after a HA. In those patients, frequent follow-ups should be planned. Further prospective studies are necessary to clarify all the risk factors contributing to the appearance of FPFs after HA.

Supplementary Information

The online version contains supplementary material available at 10.1186/s13018-020-02152-0.

Current concepts and outcomes in cemented femoral stem design and cementation techniques: the argument for a new classification system

Cemented implant fixation design principles have evolved since the 1950s, and various femoral stem designs are currently in use to provide a stable construct between the implant-cement and cement-bone interfaces.Cemented stems have classically been classified into two broad categories: taper slip or force closed, and composite beams or shaped closed designs. While these simplifications are acceptable general categories, there are other important surgical details that need to be taken into consideration such as different broaching techniques, cementing techniques and mantle thickness.With the evolution of cemented implants, the introduction of newer implants which have hybrid properties, and the use of different broaching techniques, the classification of a very heterogenous group of implants into simple binary categories becomes increasingly difficult. A more comprehensive classification system would aid in comparison of results and better understanding of the implants' biomechanics.We review these differing stem designs, their respective cementing techniques and geometries. We then propose a simple four-part classification system and summarize the long-term outcomes and international registry data for each respective type of cemented prosthesis. Cite this article: EFORT Open Rev 2020;5:241-252. DOI: 10.1302/2058-5241.5.190034.

Early Subsidence Predicts Failure of a Cemented Femoral Stem With Minor Design Changes

BACKGROUND

Radiostereometry (RSA) measurements of early micromotion can predict later failure in hip and knee prostheses. In hip implants, RSA has been particularly helpful in the evaluation of composite-beam stem designs. The Spectron EF Primary stem (Smith & Nephew, London, UK) has shown inferior performance compared with its predecessors in both clinical studies and registry reports. Early RSA studies have shown somewhat greater subsidence for the Spectron EF Primary stem compared with the earlier Spectron EF, but still within boundaries considered to be safe.

QUESTIONS/PURPOSES

Our primary research question was whether stem subsidence and rotation for this stem design measured with RSA at 2 years can predict later stem failure. A secondary question was whether high femoral stem offset and small stem sizes, both features specific to the Spectron EF Primary stem compared with its predecessors, are associated with stem failure rate.

METHODS

Two hundred forty-seven hips (209 patients with median age 63 years [range, 29-80 years], 65% female, and 77% primary osteoarthritis) with a valid RSA examination at 2 years were selected from four different RSA studies (totaling 279 hips in 236 patients) in our department. The studies were primarily aimed at evaluating cup fixation, bone cement, and polyethylene types. All study patients received a cemented Spectron EF Primary stem. The selected hips had complete followup until stem failure, death, or the end of the followup period. Stem failure was defined as revision of a loose femoral stem or radiological failure with significant osteolysis in Gruen zones 2 to 6. Cox regression analyses were performed to evaluate if stem subsidence and rotation after 2 years, adjusted for age, sex, stem size, standard/high stem offset, and conventional/highly crosslinked polyethylene, could predict later clinical aseptic failure of the stem. We identified 32 stem failures (27 revisions, five radiological failures) at 14 years median followup (range, 3-18 years). Ten-year stem survival was 94% (95% confidence interval [CI], 90%-96%).

RESULTS

Stem subsidence at 2 years (adjusted hazard ratio [HR], 6.0; 95% CI, 2.5-15; p < 0.001) and retrotorsion of the stem (adjusted HR, 1.7; 95% CI, 1.1-2.5; p = 0.018) were associated with later stem failure. Further risk factors were male sex (subsidence analysis HR, 6.9; p > 0.001), use of the two smallest stem sizes (HRsize 1, 8.0; p > 0.001, HRsize 2, 1 [reference], HRsize 3+, 0.06; p = 0.035), and the high offset option (HR, 3.1; p = 0.005).

CONCLUSIONS

Stem subsidence and retrotorsion at 2 years can predict later failure in the Spectron EF Primary stem, consistent with earlier findings on composite-beam cemented stems. Small stem size and high-offset stems comprise the main group of underperforming stems. We recommend that premarket small-scale RSA studies be performed after any design change to a THA femoral component, because even seemingly minor design changes may unexpectedly result in inferior performance.

LEVEL OF EVIDENCE

Level III, therapeutic study.

Early subsidence of shape-closed hip arthroplasty stems is associated with late revision. A systematic review and meta-analysis of 24 RSA studies and 56 survival studies

BACKGROUND AND PURPOSE

Few studies have addressed the association between early migration of femoral stems and late aseptic revision in total hip arthroplasty. We performed a meta-regression analysis on 2 parallel systematic reviews and meta-analyses to determine the association between early migration and late aseptic revision of femoral stems.

PATIENTS AND METHODS

Of the 2 reviews, one covered early migration data obtained from radiostereometric analysis (RSA) studies and the other covered long-term aseptic revision rates obtained from survival studies with endpoint revision for aseptic loosening. Stems were stratified according to the design concept: cemented shape-closed, cemented force-closed, and uncemented. A weighted regression model was used to assess the association between early migration and late aseptic revision, and to correct for confounders. Thresholds for acceptable and unacceptable migration were determined in accordance with the national joint registries (≤ 5% revision at 10 years) and the NICE criteria (≤ 10% revision at 10 years).

RESULTS

24 studies (731 stems) were included in the RSA review and 56 studies (20,599 stems) were included in the survival analysis review. Combining both reviews for the 3 design concepts showed that for every 0.1-mm increase in 2-year subsidence, as measured with RSA, there was a 4% increase in revision rate for the shape-closed stem designs. This association remained after correction for age, sex, diagnosis, hospital type, continent, and study quality. The threshold for acceptable migration of shape-closed designs was defined at 0.15 mm; stems subsiding less than 0.15 mm in 2 years had revision rates of less than 5% at 10 years, while stems exceeding 0.15 mm subsidence had revision rates of more than 5%.

INTERPRETATION

There was a clinically relevant association between early subsidence of shape-closed femoral stems and late revision for aseptic loosening. This association can be used to assess the safety of shape-closed stem designs. The published research is not sufficient to allow us to make any conclusions regarding such an association for the force-closed and uncemented stems.

Risk factors for the periprosthetic fracture after total hip arthroplasty: a systematic review and meta-analysis

BACKGROUND AND AIMS

A systematic review and meta-analysis was performed to investigate the risk factors associated with periprosthetic fracture after total hip arthroplasty.

MATERIAL AND METHODS

We searched potential studies in the following databases: MEDLINE, Embase, Web of Science, SCOPUS and Cochrane CENTRAL up to December 2013. Newcastle-Ottawa Scale was used to evaluate the methodological quality, and Stata 11.0 was used to perform all the analyses.

RESULTS

Seven studies altogether, including 1069 cases of periprosthetic fractures and 74,776 controls, were included in the meta-analysis. Compared to those absent following demographic or medical conditions, patients involved with female gender (odds ratio, 1.534; p < 0.001), advanced age (>80) (odds ratio: 4.203; p < 0.001), revision (odds ratio: 4.398; p < 0.001), rheumatoid arthritis (odds ratio: 2.503; p < 0.001), osteonecrosis (odds ratio: 1.563; p = 0.009), and implant type of Exeter (odds ratio: 1.511; p = 0.017) were more likely to sustain periprosthetic fractures. Osteoarthritis (vs not) (odds ratio: 0.449; p < 0.001) was identified a protective factor for periprosthetic fractures after total hip arthroplasty. The other factors, including lower ages, American Society of Anesthesiologists ≥ 3, and other implant types, were not significant risk factors for periprosthetic fractures.

CONCLUSIONS

These medical conditions as reminder should be kept in clinicians' mind and close follow-up should be implemented in patients involved for preventing the occurrence of periprosthetic fractures after total hip arthroplasty.

Reverse hybrid and cemented hip replacement compared using radiostereometry and dual-energy X-ray absorptiometry: 43 hips followed for 2 years in a prospective trial

BACKGROUND AND PURPOSE

Total hip replacement (THR) with a reverse hybrid (RH), a combination of a cemented polyethylene cup and a cementless femoral stem, has been increasingly used in Scandinavia. In a randomized trial, we compared an RH THR with a proximal hydroxyapatite- (HA-) coated stem to a conventional cemented THR. Both groups received the same polyethylene cup.

PATIENTS AND METHODS

51 patients (52 hips) were included. Radiostereometry (RSA) and dual-energy X-ray absorptiometry (DEXA) were performed postoperatively and after 6, 12, and 24 months. 42 patients (43 hips) were followed for 2 years.

RESULTS

Mean cup rotation around the x-axis was 0.13° for the cemented group and -0.24° for the RH group (p = 0.03). Cup migration in the other axes, and stem migration and wear were similar between the 2 study groups. Bone remodeling around the cup was also similar between the groups. Bone loss in Gruen zone 1 was 18% for the cementless stems, as compared to an increase of 1.4% for the cemented ones (p < 0.001). Bone loss was similar in the other Gruen zones. Harris hip score and Oxford hip score were similar pre- and postoperatively in the 2 groups.

INTERPRETATION

In the present study, RH THR with a cementless hydroxyapatite-coated stem and conventional cemented THR did not show any major differences regarding stem migration and bone loss after 2 years of follow-up.

The type of surgical approach influences the risk of revision in total hip arthroplasty: a study from the Swedish Hip Arthroplasty Register of 90,662 total hipreplacements with 3 different cemented prostheses

BACKGROUND AND PURPOSE

The most common surgical approaches in total hip arthroplasty in Sweden are the posterior and the anterolateral transgluteal approach. Currently, however, there is insufficient evidence to prefer one over the other regarding risk of subsequent surgery.

PATIENTS AND METHODS

We searched the Swedish Hip Arthroplasty Register between the years 1992 and 2009 to compare the posterior and anterolateral transgluteal approach regarding risk of revision in the 3 most common all-cemented hip prosthesis designs in Sweden. 90,662 total hip replacements met the inclusion criteria. We used Cox regression analysis for estimation of prosthesis survival and relative risk of revision due to dislocation, infection, or aseptic loosening.

RESULTS

Our results show that for the Lubinus SPII prosthesis and the Spectron EF Primary prosthesis, the anterolateral transgluteal approach gave an increased risk of revision due to aseptic loosening (relative risk (RR) = 1.3, 95% CI: 1.0-1.6 and RR = 1.6, CI: 1.0-2.5) but a reduced risk of revision due to dislocation (RR = 0.7, CI: 0.5-0.8 and RR = 0.3, CI: 0.1-0.4). For the Exeter Polished prosthesis, the surgical approach did not affect the outcome for dislocation or aseptic loosening. The surgical approach had no influence on the risk of revision due to infection in any of these designs.

INTERPRETATION

This observational study shows that the surgical approach affected the risk of revision due to aseptic loosening and dislocation for 2 of the most commonly used cemented implants in Sweden. Further studies are needed to determine whether these results are generalizable to other implants and to uncemented fixation.

A randomized study on migration of the Spectron EF and the Charnley flanged 40 cemented femoral components using radiostereometric analysis at 2 years

BACKGROUND AND PURPOSE

We performed a randomized study to determine the migration patterns of the Spectron EF femoral stem and to compare them with those of the Charnley stem, which is regarded by many as the gold standard for comparison of implants due to its extensive documentation.

PATIENTS AND METHODS

150 patients with a mean age of 70 years were randomized, single-blinded, to receive either a cemented Charnley flanged 40 monoblock, stainless steel, vaquasheen surface femoral stem with a 22.2-mm head (n = 30) or a cemented Spectron EF modular, matte, straight, collared, cobalt-chrome femoral stem with a 28-mm femoral head and a roughened proximal third of the stem (n = 120). The patients were followed with repeated radiostereometric analysis for 2 years to assess migration.

RESULTS

At 2 years, stem retroversion was 2.3° and 0.7° (p < 0.001) and posterior translation was 0.44 mm and 0.17 mm (p = 0.002) for the Charnley group (n = 26) and the Spectron EF group (n = 74), respectively. Subsidence was 0.26 mm for the Charnley and 0.20 mm for the Spectron EF (p = 0.5).

INTERPRETATION

The Spectron EF femoral stem was more stable than the Charnley flanged 40 stem in our study when evaluated at 2 years. In a report from the Norwegian arthroplasty register, the Spectron EF stem had a higher revision rate due to aseptic loosening beyond 5 years than the Charnley. Initial stability is not invariably related to good long-term results. Our results emphasize the importance of prospective long-term follow-up of prosthetic implants in clinical trials and national registries and a stepwise introduction of implants.

Influence of patient activity on femoral osteolysis at five and ten years following hybrid total hip replacement

We conducted a longitudinal study including patients with the same type of primary hybrid total hip replacement and evaluated patient activity and femoral osteolysis at either five or ten years post-operatively. Activity was measured using the University of California, Los Angeles scale. The primary outcome was the radiological assessment of femoral osteolysis. Secondary outcomes were revision of the femoral component for aseptic loosening and the patients' quality of life. Of 503 hip replacements in 433 patients with a mean age of 67.7 years (30 to 91), 241 (48%) were seen at five and 262 (52%) at ten years post-operatively. Osteolytic lesions were identified in nine of 166 total hip replacements (5.4%) in patients with low activity, 21 of 279 (7.5%) with moderate activity, and 14 of 58 (24.1%) patients with high activity. The risk of osteolysis increased with participation in a greater number of sporting activities. In multivariate logistic regression adjusting for age, gender, body mass index and the inclination angle of the acetabular component, the adjusted odds ratio for osteolysis comparing high vs moderate activity was 3.6 (95% confidence interval 1.6 to 8.3). Stratification for the cementing technique revealed that lower quality cementing increased the effect of high activity on osteolysis. Revision for aseptic loosening was most frequent with high activity. Patients with the highest activity had the best outcome and highest satisfaction. In conclusion, of patients engaged in high activity, 24% had developed femoral osteolysis five to ten years post-operatively.

Periprosthetic fracture fixation of the femur following total hip arthroplasty: a review of biomechanical testing

BACKGROUND

periprosthetic femoral fracture can occur following total hip arthroplasty. Fixation of these fractures are challenging due to the combination of fractured bone with an existing prosthesis. There are several clinical studies reporting the failure of fixation methods used for these fractures, highlighting the importance of further biomechanical studies in this area.

METHODS

the current literature on biomechanical models of periprosthetic femoral fracture fixation is reviewed. The methodologies involved in the experimental and computational studies of this fixation are described and compared.

FINDINGS

areas which require further investigation are highlighted and the potential use of finite element analysis as a computational tool to test the current fixation methods is addressed.

INTERPRETATION

biomechanical models have huge potential to assess the effectiveness of different fixation methods. Experimental in vitro models have been used to mimic periprosthetic femoral fracture fixation however, the numbers of measurements that are possible in these studies are relatively limited due to the cost and data acquisition constraints. Computer modelling and in particular finite element analysis is a complimentary method that could be used to examine existing protocols for the treatment of periprosthetic femoral fracture and, potentially, find optimum fixation methods for specific fracture types.

Influence of obesity on femoral osteolysis five and ten years following total hip arthroplasty

BACKGROUND

The most important long-term complication following total hip arthroplasty is periprosthetic femoral osteolysis. A sizeable proportion of patients who undergo arthroplasty are obese. While patient activity, implant type, and quality of fixation are known risk factors for osteolysis, the literature concerning obesity is sparse and controversial. Our primary objective was to evaluate the influence of obesity on the risk of osteolysis five and ten years after primary total hip arthroplasty with a cemented stem. Secondary objectives were to evaluate clinical outcome and patient satisfaction.

METHODS

We conducted a prospective cohort study of patients undergoing hip arthroplasty with a third-generation stem-cementing technique from 1996 to 2003. All patients were seen at five or ten years postoperatively. Radiographs and information regarding body-mass index (<25 kg/m(2) = normal weight, 25 to 29.9 kg/m(2) = overweight, and > or = 30 kg/m(2) = obese) and activity were obtained. Activity was assessed with use of the University of California at Los Angeles (UCLA) activity scale. Osteolysis was assessed radiographically. Clinical outcome measurements included the Harris hip and Merle d'Aubigné and Postel scores.

RESULTS

Our study included 503 arthroplasties in 433 patients; the results of 241 (47.9%) of the arthroplasties were evaluated at five years and the results of 262 (52.1%), at ten years. Osteolysis was identified around forty-four stems, with twenty-four (13.3%) in 181 hips of normal-weight patients, eleven (5.4%) in 205 hips of overweight patients, and nine (7.7%) in 117 hips of obese patients. Normal-weight patients had the highest activity level (mean UCLA activity scale score [and standard deviation], 5.5 + or - 2.0 points), and obese patients had the lowest (mean UCLA activity scale score, 5.0 + or - 1.7 points). When adjusted for activity, cementing quality, and patient age and sex, the risk of osteolysis in obese patients was not increased as compared with that for overweight patients (adjusted odds ratio, 1.4; 95% confidence interval, 0.6 to 3.7), whereas the risk of femoral osteolysis in normal-weight patients was found to be significantly higher than that in overweight patients (adjusted odds ratio, 2.6; 95% confidence interval, 1.2 to 5.7). Clinical outcomes were similar among the groups.

CONCLUSIONS

We found no increased risk of osteolysis around a cemented femoral stem in obese patients five and ten years after primary total hip arthroplasty. The highest prevalence of osteolysis was observed in normal-weight patients.

LEVEL OF EVIDENCE

Prognostic Level I. See Instructions to Authors for a complete description of levels of evidence.

The posterior approach reduces the risk of thin cement mantles with a straight femoral stem design

BACKGROUND AND PURPOSE

The properties of the cement mantle around a prosthesis are important. We investigated whether the surgical approach to the hip influences the quality and thickness of the cement mantle when using a straight femoral stem design.

METHODS

In a consecutive multi-surgeon series, we reviewed the radiographs of 270 patients after cemented Exeter total hip arthroplasty. 135 stems were introduced using an antero-lateral (transgluteal) approach and 135 stems were introduced using a posterior approach. Anterior-posterior and lateral radiographs were reviewed and cement mantle thickness was measured in Gruen zones 1-14. We graded cement mantle quality according to the Barrack classification.

RESULTS

Barrack grading did not reveal any difference in cement mantle quality between the two groups. AP and lateral radiographs showed no difference in stem alignment between the groups. The risk of a thin cement mantle (< 2 mm) was lower with a posterior approach (OR = 1.8, 95% CI: 1-3; p = 0.03). The greatest risk of a cement mantle thickness of < 2 mm occurred in Gruen zones 8-9 regardless of the surgical approach used.

INTERPRETATION

With a straight femoral stem design, the posterior approach to the hip joint appears to give a lower risk of a thin cement mantle. Irrespective of the approach, there was a risk of thin cement mantles in Gruen zones 8 and 9, which highlights the importance of lateral radiographs in the postoperative radiographic assessment of total hip replacements.

Anatomic stem design reduces risk of thin cement mantles in primary hip replacement

PURPOSE

To analyse the influence of femoral stem design in the lateral plane (anatomic vs. straight) on the cement mantle quality.

METHOD

In this consecutive multi-surgeon radiographic study we determined, Dorr grading, cement mantle quality (Barrack) and mantle thickness using Gruen zones 1–14 in 280 primary cemented total hip replacements, divided into two groups (140 anatomic Biomet Olympia, 140 straight Exeter Universal Series).

RESULTS

Twenty-three per cent of the straight Exeter Universal stems had a cement mantle of <2 mm thickness in Gruen zone 8 and 25% in Gruen zone 9, compared to 0.7% of the anatomical Olympia stems in Gruen zone 8 and 1.4% in Gruen zone 9. The difference between the two groups was statistically significant (P < 0.001). In all other zones no significant differences were found.

CONCLUSION

This radiological study confirms that femoral stems with an anatomical curve in the lateral plane carry a lower risk of thin cement mantles (especially in Gruen zones 8 and 9) than straight stems. Cement mantle analysis in one radiographic plane only is insufficient.

Outcome after total hip arthroplasty: Part II. Disease-specific follow-up and the Swedish National Total Hip Arthroplasty Register

The Swedish National Total Hip Arthroplasty Register records primary hip replacements, revisions and surgical technique/environmental factors. The end-point for failure is revision. A prosthesis still in place, however, does not mean success. Clinical and radiographic outcomes should describe in more detail the efficacy of hip replacement surgery instead of the relatively blunt outcome measure that the register can provide. We performed a clinical outcome analysis on patients with primary total hip replacement thus testing the adequacy of the end-point for failure in the Swedish register. 1,113 randomly selected patients who had had total hip replacement surgery between 1986 and 1995 answered a disease-specific self-administered questionnaire (WOMAC). A cohort of 344 patients was studied, using the Harris Hip Score and a conventional radiographic examination as outcome measures. We found clinical failure rates of 13% and 20% for all implants after 10 years, using 60 points or revision as the definition of failure in the Harris Hip Score and WOMAC, respectively. The result, according to the register during the same period, was a 7% revision rate. The clinical failure rate depended on the type of evaluation tool, definition of failure and demographics, which made it difficult to decide whether there was a need for revision. With the exception of pain measured by the Harris Hip Score, the results showed no significant correlation between clinical failure and radiographic failure. Hence, with the knowledge that there is a difference between the revision rate according to the register and clinical outcome, the strict definition of failure in the register is useful as an end-point for primary hip replacement surgery.

Documentation of hip prostheses used in NorwayA critical review of the literature from 1996–2000

We have conducted a systematic review of the scientific literature concerning outcome and clinical effectiveness of prostheses used for primary total hip replacement (THR) in Norway. The study is based on two Health Technology Assessment reports from the UK (Faulkner et al. 1998, Fitzpatrick et al. 1998), reviewing the literature from 1980 to 1995. Using a similar search strategy, we have evaluated the literature from 1996 through 2000. We included 129 scientific and medical publications which were assessed according to a specific appraisal protocol. The majority (72%) were observational studies, whereas only 9% were randomized studies. We could not retrieve any peer-reviewed documentation for one third of the implants. The Charnley prosthesis had by far the best and most comprehensive evidence base with better than 90% implant survival after about 10 years. Survival of the Charnley prosthesis declines by about 10% during each of the two following decades. Except for the Charnley and Lubinus IP, no other prosthesis on the market in Norway has given long-term results (> 15 years). 5 other cemented implants have given comparable results at about 10 years of follow-up. Some uncemented stems have shown promising medium-term outcome, but no combination of uncemented cup and stem fulfilled the benchmark criterion of > or = 90% implant survival at 10 years, which we propose as a minimum requirement for unrestricted clinical use for prostheses used in primary THR. New or undocumented implants should be introduced through a four-step model including preclinical testing, small series evaluated by radiosterometry, randomized clinical trial involving comparison with a well-documented prosthesis, and finally, surveillance of clinical use through registers.

Prosthesis survival after total hip arthroplasty--does surgical approach matter? Analysis of 19,304 Charnley and 6,002 Exeter primary total hip arthroplasties reported to the Norwegian Arthroplasty Register

BACKGROUND AND PURPOSE

Controversies still exist about whether there is any effect of operative approach on survival of hip prostheses. We compared long-term survival of primary total hip arthroplasties in a well-defined study population from a national prospective population-based registry with regard to the three most commonly used surgical approaches.

METHODS

We assessed prosthesis survival according to surgical approach (the lateral with or without trochanteric osteotomy, and the posterolateral) for 19,304 Charnley and 6,002 Exeter total hip arthroplasties performed from 1987 to 2004.

RESULTS

For Charnley total hip arthroplasties, lateral approach with trochanteric osteotomy had a lower probability of revision than lateral approach without trochanteric osteotomy (RR=0.6, 95% CI: 0.5-0.8). The lower revision rate was due to fewer revisions for aseptic loosening and dislocation. The differences had declined in the latest time period (1995-2004). We observed no differences between lateral approach without trochanteric osteotomy and posterolateral approach, except that there were more revisions due to dislocation in the posterolateral approach group (RR=1.9, 95%CI: 1.1-3.2). No statistically significant differences were observed for Exeter total hip arthroplasties.

INTERPRETATION

For Charnley prostheses, the lateral approach with trochanteric osteotomy gave a reduced revision risk compared to the other approaches, which was due to fewer revisions for dislocation, and in the first time period also fewer revisions due to aseptic loosening.

Risk factors for periprosthetic femoral fracture

Periprosthetic femur fractures are associated with high patient morbidity and are difficult reconstructive challenges. Early identification and appropriate intervention are critical to prevent this complication. Studies varying from case reports to national arthroplasty registry databases have demonstrated that certain factors are associated with an increased risk of fracture. These include trauma, patient-specific problems, and technical issues related to the hip replacement itself. Recent evidence from large registries has shown that the key to prevention of periprosthetic femur fractures is routine follow-up with radiographic studies.

[The cemented MS-30 stem. A multi-surgeon series of 333 consecutive cases]

INTRODUCTION

So far there is only one peer-reviewed long-term publication from the inventors' clinic for the MS-30 stem.

MATERIAL AND METHODS

In a retrospective study we followed the first 333 consecutive MS-30 stems. All patients with 5- to 11-year follow-up were clinically and radiographically evaluated. At the time of implantation the criteria of modern cementing techniques were not implemented. Clinical evaluation was done using the scores of Harris and Merle d'Aubigné and Postel. Radiographic evaluation included quality of the cement mantle (true lateral radiographs taken under fluoroscopy), stem subsidence, loosening signs, and the risk for pending failure.

RESULTS

At follow-up 12 hips had undergone femoral revision: 3 for aseptic loosening, 6 for infection, 1 for periprosthetic fracture, and 2 for recurrent dislocation. The overall survival for all reasons at 10 years was 96.1%; survival with aseptic loosening as an end point was 99.0%. The median Harris Hip Score at follow-up was 80 (26-100) points. Radiological evaluation revealed a thin cement mantle (<2 mm) in approximately 2/3, predominantly on the lateral views (Gruen zones 8/9). One-third of all reviewed prostheses were considered at risk for pending failure, which strongly correlated with the initial quality of the cement mantle.

CONCLUSION

Midterm results with the MS-30 stem are encouraging and an even better long-term outcome can be expected with a better cement technique.

Polished vs rough femoral components in grade A and grade C-2 cement mantles

The ideal surface for cemented femoral components remains controversial. Six polished stems were compared with 6 rough stems both with good cement mantle and also with poor cement mantles in a stair-climbing model. With good cement mantles, both the polished and the rough stems were loose by 6 million cycles. However, none were loose by radiographic criteria. With the poor cement mantle, both stems became loose earlier and developed more micromotion, the polished stems having significantly higher and earlier motion than the rough. Radiographic evidence of debonding was not visible until the stems had motion of more than 2,000 microm. In the presence of a good cement mantle in this laboratory model there was no significant difference in the development of micromotion under fatigue stair-climbing conditions between a polished or grit-blasted femoral component. However, in the presence of a poor cement mantle, the polished components had earlier and higher micromotion. This study reinforces the importance of centralization and cement technique, particularly if using a polished surface finish.

Influence of design variations on early migration of a cemented stem in THA

The clinical results of using different cemented stems in total hip arthroplasty may vary because of shape, surface finish, and choice of metal alloy. Less is known about the influence of size and offset using one and the same design. Data from 140 patients (140 hips) of a cohort constituting 197 patients (231 hips) implanted with cemented Spectron Primary stems were extracted from patients studied in four randomized studies primarily designed for other purposes. Stem size (1, 2, 3, or larger), normal/extra offset, neck length and true offset (horizontal length between the stem and head center of the inserted modular implant) were recorded in millimeters. The radiographic appearance of the cementing was graded on the immediate postoperative radiograph according to Barrack. The patients were examined with radiostereometric analysis of stem migration for a 2-year followup period. Stem Size 1 (the smallest) showed an insignificant increase in subsidence compared with the bigger sizes. Using stepwise linear regression analysis, the quality of the cementing (Barrack C2) was the only parameter that had any certain influence of the subsidence at 2 years. Stem size 2 tended to show minimum valgus alignment and sizes 1 and 3 and bigger showed minimum varus tilting. Our findings suggest that placement of the stem with the tip against the posterior cortex (C2) and stem size influence the primary fixation in different ways. This effect is small, however, indicating that further confirmation with longer followup is necessary.

LEVEL OF EVIDENCE

Therapeutic Level II-1 (prospective cohort study). See the Guidelines for Authors for a complete description of levels of evidence.

Three hundred and twenty-one periprosthetic femoral fractures

BACKGROUND

The purpose of this study was to determine the demographics, incidence, and results of treatment of periprosthetic fractures in a nationwide observational study.

METHODS

In the years 1999 and 2000, 321 periprosthetic fractures were reported to the Swedish National Hip Arthroplasty Register. All of the associated hospital records were collected. At the time of follow-up, the Harris hip score, a health-related quality-of-life measure (the EuroQol-5D [EQ-5D] index), and patient satisfaction were used as outcome measurements. A radiologist performed the radiographic evaluation.

RESULTS

Ninety-one patients, with a mean age of 73.8 years, sustained a fracture after one or several revision procedures, and 230 patients, with a mean age of 77.9 years, sustained a fracture after a primary total hip replacement. Minor trauma, including a fall to the floor, and a spontaneous fracture were the main etiologies for the injuries. A high number of patients had a loose stem at the time of the fracture (66% in the primary replacement group and 51% in the revision group). Eighty-eight percent of the fractures were classified as Vancouver type B; however, there was difficulty with preoperative categorization of the fractures radiographically. There was a high failure rate resulting in a low short to mid-term prosthetic survival rate. The sixty-six-month survival rate for the entire fracture group, with reoperation as the end point, was 74.8% +/- 5.0%. One factor associated with fracture risk was implant design.

CONCLUSIONS

On the basis of these findings, we believe that high-risk patients should have routine radiographic follow-up. Such a routine could identify a loose implant and make intervention possible before a fracture occurred. Furthermore, we recommend an exploration of the joint to test the stability of the implant in patients with a Vancouver type-B fracture in which the stability of the stem is uncertain.

High failure rate of a modern, proximally roughened, cemented stem for total hip arthroplasty

The role of surface finish on the survivorship of cemented femoral stems continues to be debated. A total of 34 proximally roughened cemented stems were implanted in 33 consecutive patients undergoing total hip arthroplasty by a single surgeon. An alarmingly high failure rate was observed, prompting a retrospective chart review, analysis of radiographs, and evaluation of retrieved stems and pathological specimens. Nineteen patients were available with more than two years follow-up. Of these 19 patients, nine stems had failed (47%) due to severe osteolysis and stem loosening. Failures were significantly more common in the male gender (p<0.005), and young (p=0.05), tall (p<0.002), and heavy patients (p<0.004). All failed revised hips showed severe metallosis, with both gross and microscopic evidence of metallic shedding from the stems. Our findings suggest that this proximally roughened stem is susceptible to early failure. Failure is characterized by stem debonding, subsidence within the cement mantle, shedding of metallic and cement particles due to fretting, and rapidly progressive osteolysis. These findings have been observed with other rough surface finish cemented stems.

Impaction allografting for massive femoral defects in revision hip arthroplasty using collared textured stems

We present a prospective study of impaction grafting using collared textured stems in femurs with massive defects (defined as requiring >150 cm(3) of cancellous allograft). Eighteen hips were followed for a minimum of 2 years. Average Harris hip scores increased from 50 preoperatively to 83 at most recent follow-up. Seventeen hips were functioning well at the time of most recent follow-up and exhibited no stem subsidence or aseptic loosening. One hip was associated with visible subsidence and required further revision. Single-photon emission computed tomography analyses performed at an average of 37 months indicated active graft reorganization in all cases studied. Impaction allografting with collared textured stems for massive defects demonstrates good intermediate-term clinical results and may be a useful alternative to allograft stem composites and megaprostheses.

Metallic shedding, surface finish changes, and extensive femoral osteolysis in the loose Spectron EF stem

The addition of a proximal rough surface finish in the satin finish Spectron stem (Spectron EF) reportedly does not alter its clinical performance. However, we have revised 15 Spectron EF stems because of aseptic loosening and extensive femoral osteolysis at early and intermediate-term followup, raising a question as to its safety. We sought to determine which interface has aseptic failure, the presence of massive femoral osteolysis, and the consequences of loosening at the implant-cement interface in the implant's surface finish. Fifteen patients with aseptic loosening of a proximal rough surface-finished Spectron EF stem at intermediate-term followup (Group A) were compared with seven patients having revisions of the same stem for infection or recurrent dislocation but without loosening (Group B). Radiographs for Group A showed debonding at the cement-implant interface and stem subsidence in 13 hips, and severe femoral osteolysis in seven, including two pathologic periprosthetic fractures. During revision surgery, all 13 subsided stems showed a metallic stained pseudomembrane and metallic shedding with polishing of the stem surface. None of the patients in Group B who had revision surgery had these changes. Aseptic failure of the Spectron EF stem was characterized by debonding, subsidence, and metallic shedding with concomitant massive femoral osteolysis and metallosis, which is similar to conditions reported for loose, rough cemented stems, but has not been reported for the satin finish Spectron stem.

LEVEL OF EVIDENCE

Therapeutic study, Level III (retrospective comparative study). See the Guidelines for Authors for a complete description of levels of evidence.

Periprosthetic femoral fractures classification and demographics of 1049 periprosthetic femoral fractures from the Swedish National Hip Arthroplasty Register

Postoperative femoral periprosthetic fracture is an uncommon complication of total hip arthroplasty surgery, but several centers worldwide have recently reported an increase in total numbers of such fractures. This severe complication is costly for society and results in high morbidity. Our analysis of 1049 periprosthetic fractures occurring in Sweden between 1979 and 2000 and recorded in the Swedish National Hip Arthroplasty Register focuses on patient- and implant-related factors, fracture classification, and fracture frequency. These were our 3 major findings: (1) a majority of the patients who sustained a late periprosthetic femoral fracture had a loose stem. (2) Implant-related factors are significantly associated with occurrence of a periprosthetic fracture. (3) Since the 1980s in Sweden, treatment results for periprosthetic fractures have been poor, with low long-term survivorship and a high frequency of complications. We have initiated further studies of this important problem.

The evidence base on the orthopaedic NICE report

Since the publication of its first guidelines the National Institute for Clinical Excellence (NICE) has come under a lot of criticism, particularly with respect to its recommendations in medicine (Bratby, 2001). The first appraisal in the field of surgery was on total hip replacement (THR) and was issued in April 2000 (NICE, 2000).

Sixteen-year follow-up of the cemented spectron femoral stem for hip arthroplasty

Clinical and radiographic follow-up was performed on a consecutive series of 105 patients who underwent 120 total hip arthroplasties at the authors' institution from 1983 to 1988 with a straight, cobalt-chrome femoral stem implanted using a second-generation cementing technique. The mean age at the time of surgery was 68.5 years, and the mean follow-up was 16 years. At 16 years' follow-up, the prevalence of revision for aseptic loosening of the Spectron femoral component was only 4.2%; 5 stems were revised for aseptic loosening at a mean of 10.2 years after implantation. Sixteen-year survivorship of the component was 93.9% +/- 2.7% when revision for aseptic loosening was taken as the endpoint or 90.3% +/- 4.4% when either revision for aseptic loosening or radiographic evidence of loosening was taken as the endpoint.

Migration of metal-on-metal versus ceramic-on-polyethylene hip prostheses

In a prospective randomized study, 32 metal-on-metal prostheses and 29 ceramic-on-polyethylene prostheses of similar design were implanted in 59 patients. Radiolucency, cup migration, wear, and function were examined after a minimum of 2 years followup (followup rate, 87%). The purpose of the current study was to evaluate whether higher frictional torque of metal-on-metal will lead to a higher rate of early metal-on-metal cup loosening. A computer-assisted method was used for wear and migration measurements of the acetabular component. Metal-on-metal prostheses migrated in a craniocaudad direction significantly less than ceramic-on-polyethylene prostheses. The mean total migration for both types of prostheses exceeded 1.5 mm at 2 years. Clinically, no difference between the two prostheses regarding activity, pain, or range of motion was found at 2 years. As migration of metal-on-metal prostheses was not higher in comparison with ceramic-on-polyethylene prostheses, the expected higher frictional torque of metal-on-metal prostheses did not increase migration during short-term followup. The different debris produced by both bearings did not influence the short-term results of this study, but might cause different long-term results.

Polyethylene wear in prosthetic hips with loose components

We measured in vivo polyethylene wear of acetabular cups in 74 patients (83 hips) with Charnley total hip arthroplasties (THA), revised because of aseptic loosening of either the acetabular or femoral component. We analyzed conventional pelvic radiographs of 42 THAs before revision due to loose acetabular components alone and 41 THAs before revision due to loose femoral components alone. The THAs were revised after 10 to 26 years. The mean wear-rate in hips with a loose acetabular components was 0.3 mm/y, whereas in hips with a loose femoral components, it was 0.1 mm/y (P=.0001). The mean total linear wear, as measured on the last available radiographs before revision, was 3.4 mm and 1.5 mm, respectively (P=.0001). A significant difference in linear wear between hips with loose cups and loose stems was seen 1 year after surgery: 0.4 mm/y versus 0.3 mm/y, respectively (P=.05).

Nice hips: shame about the conclusions

In April 2000 the National Institute for Clinical Excellence (NICE) issued their first appraisal in the field of surgery, "Guidance on the selection of prostheses for primary total hip replacement". NICE has already been heavily criticised for its recommendations in the field of medicine, due to its perceived role in rationing healthcare. This paper examines the conclusions of the appraisal committee (which included only two orthopaedic surgeons), the evidence on which they drew their conclusions and the evidence that was overlooked. We conclude that it is not clear how they determined the important ten-year benchmark and that they over-emphasise the benefits of cheaper cemented prostheses, failing to fully consider the evidence for the more expensive uncemented and hybrid combinations. (Hip International 2002; 12: 334-7).

The John Charnley Award: Three-dimensional analysis of the cement mantle in total hip arthroplasty

Cemented fixation of the femoral stem is the gold standard for patients older than 60 years. The importance of reliably achieving an adequate cement mantle has been shown in many studies. Currently, inspection and grading of plain radiographs is the accepted method for study of the cement mantle. However, the reliability of plain radiographs for this purpose has been questioned. In addition, the interobserver agreement of current grading systems has been shown to be limited. A new in vitro method of cement mantle analysis is described. Plastic replicas of six contemporary stems were implanted into femurs from cadavers. The specimens were imaged with a computed tomography scanner. Detailed, computer-assisted analysis of mantle thickness was done. Comparisons were made between designs. A subset was compared with standard radiographs. Plain radiographs overestimated thickness and underestimated the deficiencies. There was significant variability in the mantle produced by the different designs. Commonly used designs had deficiencies in their mantles by standard criteria despite proper surgical technique. The importance of being fully acquainted with the particular implant one uses is emphasized by these results. This is a valuable technique for investigation of the effects on the cement mantle of implant design, surgical technique, and patient anatomy.

Femoral alignment of the Charnley stem: a randomized trial comparing the original with the new instrumentation in 123 hips

Deficient cement mantles are associated with aseptic loosening of the stem component of total hip replacement. In a former study of 206 Charnley stems, we found high frequencies of stem malalignment, especially on the lateral view, consequently resulting in a high percentage of low cement mantle grading. If the "true" lateral radiographic projection is not used, there is a risk that the frequency of mantle defects is underestimated. A logistic regression analysis showed a high correlation between low cement mantle grading and stem loosening after a mean follow-up of 10 years. The new Charnley instrumentation was introduced in 1994 and we started a randomized trial including 123 prostheses to determine whether the new instrumentation improved the position of the stem in both the AP and lateral planes. Postoperative radiographs revealed a significant change in AP positioning-i.e., from a high percentage of varus with the original method to valgus with the new instrumentation. However, there was no difference on the lateral view, with a persisting high frequency of stems with implant-inner cortex contact resulting in high percentages of low cement-mantle grading in both systems. If this deficiency, in a long-term perspective, is associated with aseptic loosening, as many authors have claimed, the manufacturers should address the problem.

Correlation of wear debris-induced osteolysis and revision with volumetric wear-rates of polyethylene: a survey of 8 reports in the literature

This survey focused on clinical reports of polyethylene wear and osteolysis in total hip replacements. With regard to documentation of clinical wear-rates, 57 publications were reduced to an analysis of 8 reports of THR series, including the incidence of osteolysis. A direct correlation was found among volumetric wear-rates, incidence of osteolysis and revision rates in THR concepts of the 1983-1987 era. As volumetric wear rate increased, the incidence of osteolysis and revision rates increased. With regard to our grading system for volumetric wear, with follow-up in the 4-15 year range, osteolysis was rare in group A (wear = 0-80 mm3/year), ranging from 6% to 31% in group B (wear 40-80 mm3/year) and from 21% to 100% in group C (wear > 140 mm3/year). With regard to cup design, the optimal low-wear group had mainly cemented polyethylene cups with 22 and 28 mm head sizes. The mid-wear group B had metal-backed cemented and uncemented cups, with 28 mm head size, and the high-risk group C had only uncemented, metal-backed cups, with the highest wear in the 32 mm head size. Less than 10 years of follow-up did not distinguish adequately between different designs of THR, except in a few cases which had early failures due to material or design deficiencies. Overall, the cemented all-polyethylene cup combined with the smaller ball head proved to be better.