Inflammatory cell adhesion and surface defects on heparin-surface-modified poly(methyl methacrylate) intraocular lenses in diabetic patients

Reversible deposition of inflammatory cells on the surface of an intraocular lens in a patient with uveitis: Case report and literature review

INTRODUCTION

The deposition of inflammatory cells on an intraocular lens (IOL) is a rare but potentially serious complication. We report a patient who presented with reversible severe deposition of inflammatory cells on the anterior surface of a hydrophobic IOL.

CASE DESCRIPTION

A 68-year-old woman with remissive uveitis presented with blurred vision in her right eye that persisted for 1 month. She had undergone cataract surgery and hydrophobic IOL (ZA9003, Johnson & Johnson Surgical Vision) implantation 3 months before presentation. Deposition of inflammatory cells was diagnosed by ocular examination. The IOL became transparent after 6 months of treatment with combined antibiotic/steroid eyedrops (tobramycin/dexamethasone eyedrops) and atropine. However, the cellular deposition recurred after either discontinuing the tobramycin/dexamethasone eyedrops or switching to steroid-only eyedrops (fluorometholone). Therefore, she was prescribed continuous tobramycin/dexamethasone eyedrops, twice-daily, and her IOL remained transparent at the time of submission of this article.

CONCLUSIONS

We have reported a case of reversible severe deposition of inflammatory cells on the anterior surface of a hydrophobic IOL in a patient with uveitis that was managed by continuous administration of combined antibiotic/steroid eyedrops. The morphology of the inflammatory cells deposits and the treatment differed from those of previously reported cases.

[Evolution of IOL exchange. Part 1. Development of methods for IOL exchange]

The review presents the history of development and improvement of methods for intraocular lens (IOL) exchange. Existing techniques of IOL exchange are comparatively analyzed.

Physicochemical and surface properties of acrylic intraocular lenses and their clinical significance

To analyze and compare several commercially available acrylic intraocular lenses (IOLs) with particular regard to their clinical significance, we examined the physicochemical and surface properties of four currently available acrylic IOLs using static water contact angle, atomic force microscopy (AFM), Raman spectroscopy, and differential scanning calorimetry (DSC) measurements. The hydrophobic acrylic IOLs, ZA9003, and MA60BM, had contact angles ranging from 77.9° ± 0.65° to 84.4° ± 0.09°. The contact angles in the hydrophilic acrylic (970C) and heparin-surface-modified (HSM) hydrophilic acrylic IOLs (BioVue) were 61.8° ± 0.45° and 69.7° ± 0.76°, respectively. The roughness of the IOL optic surface differed depending on the type of IOL (p < 0.001). The surface roughness of BioVue had the lowest value: 5.87 ± 1.26 nm. This suggests that the BioVue IOL may lead to reduced cellular adhesion compared to the unmodified IOLs. All IOLs including those composed of acrylic optic materials from different manufacturers showed distinct Raman spectra peaks. The glass transition temperatures (T_g) for the hydrophobic acrylic IOLs were between 12.5 and 13.8 °C. These results suggest that the intraoperative and postoperative behavior of an IOL can be predicted. This information is also expected to contribute greatly to the industrial production of reliable biocompatible IOLs.

The effect of enoxaparin-containing irrigation fluid used during cataract surgery on postoperative inflammation in patients with diabetes

PURPOSE

To investigate effects of enoxaparin on postoperative inflammation in patients with moderate nonproliferative diabetic retinopathy (NPDR) and nuclear cataract.

DESIGN

Prospective masked controlled trial.

METHODS

setting: Institutional practice. study population: The study included 51 eyes of 51 diabetes mellitus (DM) patients with moderate NPDR and grade 2-3 nuclear cataracts. Group 1 included randomly selected patients who received enoxaparin in balanced salt solution (BSS) during cataract surgery, while standard BSS was used in Group 2. observation procedure: Patients were followed up 1 day, 1 week, and 1 and 2 months after the surgery. main outcome measures: Anterior chamber cell and flare.

RESULTS

Postoperatively, 20 patients from Group 1 and 4 patients in Group 2 had less than a mean of 10 cells at day 1 (P = .012). At the first week, 20 patients from Group 1 and 10 patients from Group 2 had less than a mean of 10 cells (P = .004). When compared for flare, 20 patients from Group 1 and 8 patients from Group 2 had a flare between 0 and +1 at postoperative day 1 (P < .001). By the end of postoperative first week, 24 patients from Group 1and 18 patients from Group 2 had a flare between 0 and +1 (P = .012). There was no difference between groups in terms of postoperative inflammation at the first and second months after the surgery.

CONCLUSION

The results of the study suggest that enoxaparin added into the infusion fluid may reduce postoperative inflammation in patients with DM, and this result supports the anti-inflammatory effect of enoxaparin.

Effect of heparin coating of a foldable intraocular lens on inflammation and capsular bag performance after cataract surgery

PURPOSE

To evaluate the effect of a heparin-coated foldable intraocular lens (IOL) on postoperative flare in high-risk patients.

SETTING

Vienna Institute for Research in Ocular Surgery, Department of Ophthalmology, Hanusch Hospital, Vienna, Austria.

DESIGN

Randomized clinical trial.

METHODS

This study included patients with diabetes mellitus (DM), pseudoexfoliation syndrome (PXF), or both scheduled for cataract surgery in both eyes. One eye received a coated IOL (Polylens EC-1YH PAL) and the other eye, an uncoated control IOL (Polylens EC-1Y PAL). Aqueous flare measurements were taken using a laser flare meter (FM-600, Kowa) preoperatively and 1 hour, 1 day, 3 weeks, and 3 months postoperatively. Visual acuity and anterior (ACO) and posterior (PCO) capsule opacification were assessed, and IOL centration and tilt were measured with a Purkinje meter.

RESULTS

Eighty eyes of 40 patients were included in the study; 64 eyes of 32 patients completed the study. The mean flare values (photons/ms) preoperatively and 1 hour, 1 day, 3 weeks, and 3 months postoperatively were 6.98 ± 3.71 (SD), 19.14 ± 18.90, 16.62 ± 25.33, 10.33 ± 9.70, 8.74 ± 4.64, respectively, with the coated IOL and 8.65 ± 5.73, 22.08 ± 16.23, 13.44 ± 13.71, 7.50 ± 4.11, and 7.03 ± 3.70, respectively, with the control IOL. No significant differences were found in flare, visual acuity, ACO, PCO, tilt, or centration between the coated IOL and the control IOL at any timepoint.

CONCLUSION

No significant differences in flare or capsule performance were found between the coated IOL and control IOL.

AFM study for morphological characteristics and biomechanical properties of human cataract anterior lens capsules

The aim of this study was to quantitatively investigate the morphologies (surface roughness) and biomechanical properties (Young's modulus) of human anterior lens capsules (ALCs) for noncataract and cataract groups using atomic force microscopy. Eight human ALCs obtained during phacoemulsification from patients with senile cataracts (72 ± 13 years) were investigated in both the hydrated and dehydrated conditions. The cataract group showed clearly the proliferated lens epithelial cells (LECs) with a monomorphic cell structure, a diameter of 12.54 ± 4.31 μm, and a height of 0.23 ± 0.04 μm, whereas the control group showed no LECs. A substantial amount of false-positive calcification was observed caused by the deposition of remnants of dried salt solution. Cataract group showed significantly higher surface roughness (382.06 nm, p ≤ 0.001) than control group in the anterior side of ALCs, whereas cataract group showed significantly lower surface roughness (353.79 nm, p ≤ 0.001) than control group in their posterior side. Cataract group showed significantly higher Young's modulus (69.52 kPa, p ≤ 0.001) compared to the control group, regardless of the ALC side. Therefore, it is significant that this study provides a new method to examine the nanostructural characteristic and biomechanical property of human ALCs through a nanometer-scale resolution microscopy technique.

Plasma modification of PMMA films: surface free energy and cell-attachment studies

The surface of a material is the most important part determining the acceptance by and compatibility with the environment. In many cases, although the bulk properties are excellent for a specific application, the surface may require to be modified and engineered in the desired direction. This is especially important for materials used in biological media, since the surface charge, hydophilicity and wettability are important for thrombosis formation, cell attachment or cell proliferation. In this study, poly(methyl methacrylate) films were prepared by solvent casting and their surfaces were modified by oxygen plasma treatment by applying powers of 20, 100 and 300 W. The effects of surface chemistry alterations on hydophilicity, work of adhesion, surface free energy and cell adhesion were examined. Cell attachment and proliferation are especially important for the materials used for tissue-engineering purposes. The results demonstrated that there is an optimum value for hydrophilicity and surface free energy which enhance cell attachment.

Chemoattraction of inflammatory cells by various intraocular lens materials

PURPOSE

To compare the chemotactic activity induced by polymethyl methacrylate (PMMA), acrylic, and silicone intraocular lens (IOL) materials, regardless of the surgical and host factors.

METHODS

The chemotactic effect of five different IOLs was studied using a modified multi-well Boyden chamber. Two different non-coated PMMA IOLs, a heparin-coated PMMA IOL, an acrylic IOL, and a silicone IOL were assessed. Each mean migration distance of the IOLs was compared with the others using Student's t test.

RESULTS

All IOLs induced some amount of leukocyte chemotaxis. There was no statistically significant difference between the chemotactic activity of PMMA IOLs. However, chemotactic activity was significantly higher in acrylic (p<0.05) and silicone (p<0.05) IOLs compared to one of the PMMA lenses.

CONCLUSIONS

This limited study has proven that chemotaxis assay is a useful tool to assess the biocompatibility of IOLs. The IOL material itself might attract inflammatory cells to its surface in the absence of surgical and host factors. As PMMA IOLs do not cause an increase in inflammatory reaction, they may be considered safe to use. Further improvement in chemical composition and surface characteristics of IOLs should reduce the inflammatory reaction and increase the biocompatibility and safety of IOLs.

Material Properties of Various Intraocular Lenses in an Experimental Study

INTRODUCTION

With the recent introduction of small-incision cataract surgery, requirements for intraocular lens (IOL) flexibility, strength and hydrophilicity have rapidly evolved. The IOL surface, however, remains a critical factor influencing uveal biocompatibility.

PURPOSE

To objectively quantify factors of material properties of various IOLs using contact angle measurements, differential scanning calorimetry, dynamic-mechanical measurements and scanning electron microscopy.

MATERIAL AND METHODS

In our study, 17 currently available IOLs were investigated using contact angle measurements to assess hydrophilicity and biocompatibility, as well as differential scanning calorimetry for the estimation of glass transition temperature. Mechanical capacity and flexibility were investigated using dynamic-mechanical measurements. Additional analysis of the IOL surface was performed using scanning electron microscopy.

RESULTS

The contact angle measurements of the studied IOLs revealed similar values within each group. The silicone IOLs had values between 106 and 119 degrees. The PMMA IOLs were found to have a narrower range of values, between 73.2 and 75.5 degrees. Lenses made of hydrogel had values between 59.2 and 69.1 degrees. The heparin-modified surface showed the lowest contact angle of 56.5 degrees. The glass transition temperature was determined by dynamic differential scanning calorimetry. The resulting values were between 118.8 and 113.5 degrees C for PMMA IOLs, 15.5 and 14.0 degrees C for acrylic IOLs, and -91.7 and -119.6 degrees C for silicone IOLs. The dynamic-mechanical measurements revealed that PMMA lenses manifested characteristics similar to glass, whereas silicone lenses had characteristics similar to rubber. Acrylic lenses were between rubber and glass. Scanning electron microscopy revealed smooth dispersion of fibrin on hydrophobic IOLs and a relative lack of fibrin adhesion on hydrophilic materials.

CONCLUSION

These results demonstrate that material properties of various IOL materials are consistent within classes of IOL materials. This suggests that the intraoperative and postoperative behavior of an IOL is predictable and related to its composition, thus allowing surgeons to choose IOLs more appropriate for different surgical situations and individual patient characteristics.

Hydrophobic acrylic versus heparin surface-modified polymethylmethacrylate intraocular lens: a biocompatibility study

BACKGROUND

The implant of intraocular lenses (IOLs) following cataract surgery induces a foreign-body reaction to the IOL and a response on the part of the lens epithelial cells (LECs). The purpose of this study was to compare these aspects after the implantation of two different IOL materials.

METHODS

Thirty-six cataract patients were randomised to receive two different foldable lens: an acrylic hydrophobic IOL (Acrysof MA30BA) and a heparin surface-modified (HSM) polymethylmethacrylate IOL (Pharmacia & Upjohn 809C) after phacoemulsification. Slit-lamp biomicroscopy with specular technique was used to assess the inflammatory cell adhesion on the anterior IOL surface, anterior capsule opacification (ACO) and membrane growth from the rhexis edge at 7, 30, 90, 180 and 360 days after surgery.

RESULTS

The 809C group showed a higher percentage of patients with slight inflammatory cell adhesion on the anterior cell surface and a higher small cellular density during the whole follow-up period. The epithelioid cell response was greater in the 809C group than the Acrysof group but the difference between the two groups was not statistically significant. The ACO increased during the follow-up in both groups but was significantly higher in the 809C group.

CONCLUSION

Acrysof lenses are more biocompatible than HSM IOLs, showing a lower grade of inflammatory cell adhesion and ACO. The implantation of these lenses may be particularly indicated in patients with pathologies predisposing to blood-aqueous barrier damage.